diff options
Diffstat (limited to 'data/templates')
| -rw-r--r-- | data/templates/system-display/LCDd.conf.tmpl | 45 |
1 files changed, 10 insertions, 35 deletions
diff --git a/data/templates/system-display/LCDd.conf.tmpl b/data/templates/system-display/LCDd.conf.tmpl index 0ef796c76..1dd646202 100644 --- a/data/templates/system-display/LCDd.conf.tmpl +++ b/data/templates/system-display/LCDd.conf.tmpl @@ -60,6 +60,10 @@ Driver=sdeclcd Driver=hd44780 {%- endif %} +{%- if model == 'test' %} +Driver=CFontzPacket +{%- endif %} + # Tells the driver to bind to the given interface. [default: 127.0.0.1] #Bind=127.0.0.1 @@ -191,44 +195,15 @@ Reboot=no ## CrystalFontz packet driver (for CFA533, CFA631, CFA633 & CFA635) ## [CFontzPacket] - -# Select the LCD model [default: 633; legal: 533, 631, 633, 635] -Model=633 - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS1 - -# Set the initial contrast [default: 560; legal: 0 - 1000] +{%- if model == 'test' %} +Model=533 +Device=/dev/serial/by-bus/usb0b1.1p1.0 Contrast=350 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] Brightness=1000 - -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive OffBrightness=50 - -# Reinitialize the LCD's BIOS on driver start. [default: no; legal: yes, no] Reboot=yes - -# Enable the USB flag if the device is connected to an USB port. For -# serial ports leave it disabled. [default: no; legal: yes, no] -#USB=yes - -# Very old 633 firmware versions do not support partial screen updates using -# 'Send Data to LCD' command (31). For those devices it may be necessary to -# enable this flag. [default: no; legal: yes, no] -#OldFirmware=yes - -# Override the LCD size known for the selected model. Usually setting this -# value should not be necessary. -#Size=20x4 - -# Override the default communication speed known for the selected model. -# Default value depends on model [legal: 19200, 115200] -#Speed=115200 - +USB=yes +{%- endif %} ## Curses driver ## @@ -546,7 +521,7 @@ Speed=19200 [hd44780] {%- if model == 'ezio' %} ConnectionType=ezio -Device=/dev/ttyS1 +Device=/dev/ttyUSB0 Keypad=yes Size=16x2 KeyMatrix_4_1=Enter |