diff options
Diffstat (limited to 'data/templates')
| -rw-r--r-- | data/templates/dns-dynamic/ddclient.conf.j2 | 7 | ||||
| -rw-r--r-- | data/templates/dns-forwarding/recursor.conf.j2 | 14 | ||||
| -rw-r--r-- | data/templates/firewall/nftables-defines.j2 | 21 | ||||
| -rw-r--r-- | data/templates/firewall/nftables-vrf-zones.j2 | 17 | ||||
| -rw-r--r-- | data/templates/firewall/upnpd.conf.j2 | 116 | ||||
| -rw-r--r-- | data/templates/frr/bfdd.frr.j2 | 6 | ||||
| -rw-r--r-- | data/templates/grub/grub_vyos_version.j2 | 9 |
7 files changed, 137 insertions, 53 deletions
diff --git a/data/templates/dns-dynamic/ddclient.conf.j2 b/data/templates/dns-dynamic/ddclient.conf.j2 index 6c0653a55..5538ea56c 100644 --- a/data/templates/dns-dynamic/ddclient.conf.j2 +++ b/data/templates/dns-dynamic/ddclient.conf.j2 @@ -7,7 +7,7 @@ use{{ ipv }}={{ address if address == 'web' else 'if' }}{{ ipv }}, \ web{{ ipv }}={{ web_options.url }}, \ {% endif %} {% if web_options.skip is vyos_defined %} -web-skip{{ ipv }}='{{ web_options.skip }}', \ +web{{ ipv }}-skip='{{ web_options.skip }}', \ {% endif %} {% else %} if{{ ipv }}={{ address }}, \ @@ -45,9 +45,12 @@ use=no else ['']) %} {% set password = config.key if config.protocol == 'nsupdate' else config.password %} +{% set address = 'web' if config.address.web is vyos_defined + else config.address.interface %} +{% set web_options = config.address.web | default({}) %} # Web service dynamic DNS configuration for {{ service }}: [{{ config.protocol }}, {{ host }}] -{{ render_config(host, config.address, config.web_options, ip_suffixes, +{{ render_config(host, address, web_options, ip_suffixes, protocol=config.protocol, server=config.server, zone=config.zone, login=config.username, password=password, ttl=config.ttl, min_interval=config.wait_time, max_interval=config.expiry_time) }} diff --git a/data/templates/dns-forwarding/recursor.conf.j2 b/data/templates/dns-forwarding/recursor.conf.j2 index e4e8e7044..5ac872f19 100644 --- a/data/templates/dns-forwarding/recursor.conf.j2 +++ b/data/templates/dns-forwarding/recursor.conf.j2 @@ -57,3 +57,17 @@ serve-rfc1918={{ 'no' if no_serve_rfc1918 is vyos_defined else 'yes' }} auth-zones={% for z in authoritative_zones %}{{ z.name }}={{ z.file }}{{- "," if not loop.last -}}{% endfor %} forward-zones-file={{ config_dir }}/recursor.forward-zones.conf + +#ecs +{% if options.ecs_add_for is vyos_defined %} +ecs-add-for={{ options.ecs_add_for | join(',') }} +{% endif %} + +{% if options.ecs_ipv4_bits is vyos_defined %} +ecs-ipv4-bits={{ options.ecs_ipv4_bits }} +{% endif %} + +{% if options.edns_subnet_allow_list is vyos_defined %} +edns-subnet-allow-list={{ options.edns_subnet_allow_list | join(',') }} +{% endif %} + diff --git a/data/templates/firewall/nftables-defines.j2 b/data/templates/firewall/nftables-defines.j2 index a20c399ae..8a75ab2d6 100644 --- a/data/templates/firewall/nftables-defines.j2 +++ b/data/templates/firewall/nftables-defines.j2 @@ -98,5 +98,26 @@ } {% endfor %} {% endif %} + +{% if group.dynamic_group is vyos_defined %} +{% if group.dynamic_group.address_group is vyos_defined and not is_ipv6 and is_l3 %} +{% for group_name, group_conf in group.dynamic_group.address_group.items() %} + set DA_{{ group_name }} { + type {{ ip_type }} + flags dynamic, timeout + } +{% endfor %} +{% endif %} + +{% if group.dynamic_group.ipv6_address_group is vyos_defined and is_ipv6 and is_l3 %} +{% for group_name, group_conf in group.dynamic_group.ipv6_address_group.items() %} + set DA6_{{ group_name }} { + type {{ ip_type }} + flags dynamic, timeout + } +{% endfor %} +{% endif %} +{% endif %} + {% endif %} {% endmacro %} diff --git a/data/templates/firewall/nftables-vrf-zones.j2 b/data/templates/firewall/nftables-vrf-zones.j2 deleted file mode 100644 index 3bce7312d..000000000 --- a/data/templates/firewall/nftables-vrf-zones.j2 +++ /dev/null @@ -1,17 +0,0 @@ -table inet vrf_zones { - # Map of interfaces and connections tracking zones - map ct_iface_map { - typeof iifname : ct zone - } - # Assign unique zones for each VRF - # Chain for inbound traffic - chain vrf_zones_ct_in { - type filter hook prerouting priority raw; policy accept; - counter ct original zone set iifname map @ct_iface_map - } - # Chain for locally-generated traffic - chain vrf_zones_ct_out { - type filter hook output priority raw; policy accept; - counter ct original zone set oifname map @ct_iface_map - } -} diff --git a/data/templates/firewall/upnpd.conf.j2 b/data/templates/firewall/upnpd.conf.j2 index e964fc696..616e8869f 100644 --- a/data/templates/firewall/upnpd.conf.j2 +++ b/data/templates/firewall/upnpd.conf.j2 @@ -3,13 +3,42 @@ # WAN network interface ext_ifname={{ wan_interface }} {% if wan_ip is vyos_defined %} + +# if the WAN network interface for IPv6 is different than for IPv4, +# set ext_ifname6 +#ext_ifname6=eth2 + # If the WAN interface has several IP addresses, you -# can specify the one to use below +# can specify the one to use below. +# Setting ext_ip is also useful in double NAT setup, you can declare here +# the public IP address. {% for addr in wan_ip %} ext_ip={{ addr }} {% endfor %} {% endif %} +{% if stun is vyos_defined %} +# WAN interface must have public IP address. Otherwise it is behind NAT +# and port forwarding is impossible. In some cases WAN interface can be +# behind unrestricted full-cone NAT 1:1 when all incoming traffic is NAT-ed and +# routed to WAN interfaces without any filtering. In this cases miniupnpd +# needs to know public IP address and it can be learnt by asking external +# server via STUN protocol. Following option enable retrieving external +# public IP address from STUN server and detection of NAT type. You need +# to specify also external STUN server in stun_host option below. +# This option is disabled by default. +ext_perform_stun=yes +# Specify STUN server, either hostname or IP address +# Some public STUN servers: +# stun.stunprotocol.org +# stun.sipgate.net +# stun.xten.com +# stun.l.google.com (on non standard port 19302) +ext_stun_host={{ stun.host }} +# Specify STUN UDP port, by default it is standard port 3478. +ext_stun_port={{ stun.port }} +{% endif %} + # LAN network interfaces IPs / networks {% if listen is vyos_defined %} # There can be multiple listening IPs for SSDP traffic, in that case @@ -20,6 +49,9 @@ ext_ip={{ addr }} # When MULTIPLE_EXTERNAL_IP is enabled, the external IP # address associated with the subnet follows. For example: # listening_ip=192.168.0.1/24 88.22.44.13 +# When MULTIPLE_EXTERNAL_IP is disabled, you can list associated network +# interfaces (for bridges) +# listening_ip=bridge0 em0 wlan0 {% for addr in listen %} {% if addr | is_ipv4 %} listening_ip={{ addr }} @@ -65,6 +97,18 @@ min_lifetime={{ pcp_lifetime.min }} {% endif %} {% endif %} +# table names for netfilter nft. Default is "filter" for both +#upnp_table_name= +#upnp_nat_table_name= +# chain names for netfilter and netfilter nft +# netfilter : default are MINIUPNPD, MINIUPNPD, MINIUPNPD-POSTROUTING +# netfilter nft : default are miniupnpd, prerouting_miniupnpd, postrouting_miniupnpd +#upnp_forward_chain=forwardUPnP +#upnp_nat_chain=UPnP +#upnp_nat_postrouting_chain=UPnP-Postrouting + +# Lease file location +lease_file=/config/upnp.leases # To enable the next few runtime options, see compile time # ENABLE_MANUFACTURER_INFO_CONFIGURATION (config.h) @@ -89,6 +133,11 @@ model_description=Vyos open source enterprise router/firewall operating system # Model URL, default is URL of OS vendor model_url=https://vyos.io/ +# Bitrates reported by daemon in bits per second +# by default miniupnpd tries to get WAN interface speed +#bitrate_up=1000000 +#bitrate_down=10000000 + {% if secure_mode is vyos_defined %} # Secure Mode, UPnP clients can only add mappings to their own IP secure_mode=yes @@ -108,6 +157,10 @@ secure_mode=no # Report system uptime instead of daemon uptime system_uptime=yes +# Notify interval in seconds. default is 30 seconds. +#notify_interval=240 +notify_interval=60 + # Unused rules cleaning. # never remove any rule before this threshold for the number # of redirections is exceeded. default to 20 @@ -116,25 +169,46 @@ clean_ruleset_threshold=10 # a 600 seconds (10 minutes) interval makes sense clean_ruleset_interval=600 +############################################################################ +## The next 5 config parameters (packet_log, anchor, queue, tag, quickrules) +## are specific to BSD's pf(4) packet filter and hence cannot be enabled in +## VyOS. +# Log packets in pf (default is no) +#packet_log=no + # Anchor name in pf (default is miniupnpd) -# Something wrong with this option "anchor", comment it out -# vyos@r14# miniupnpd -vv -f /run/upnp/miniupnp.conf -# invalid option in file /run/upnp/miniupnp.conf line 74 : anchor=VyOS -#anchor=VyOS +#anchor=miniupnpd -uuid={{ uuid }} +# ALTQ queue in pf +# Filter rules must be used for this to be used. +# compile with PF_ENABLE_FILTER_RULES (see config.h file) +#queue=queue_name1 -# Lease file location -lease_file=/config/upnp.leases +# Tag name in pf +#tag=tag_name1 + +# Make filter rules in pf quick or not. default is yes +# active when compiled with PF_ENABLE_FILTER_RULES (see config.h file) +#quickrules=no +## +## End of pf(4)-specific configuration not to be set in VyOS. +############################################################################ + +# UUID, generate your own UUID with "make genuuid" +uuid={{ uuid }} # Daemon's serial and model number when reporting to clients # (in XML description) #serial=12345678 #model_number=1 +# If compiled with IGD_V2 defined, force reporting IGDv1 in rootDesc (default +# is no) +#force_igd_desc_v1=no + {% if rule is vyos_defined %} -# UPnP permission rules -# (allow|deny) (external port range) IP/mask (internal port range) +# UPnP permission rules (also enforced for NAT-PMP and PCP) +# (allow|deny) (external port range) IP/mask (internal port range) (optional regex filter) # A port range is <min port>-<max port> or <port> if there is only # one port in the range. # IP/mask format must be nnn.nnn.nnn.nnn/nn @@ -151,25 +225,3 @@ lease_file=/config/upnp.leases {% endif %} {% endfor %} {% endif %} - -{% if stun is vyos_defined %} -# WAN interface must have public IP address. Otherwise it is behind NAT -# and port forwarding is impossible. In some cases WAN interface can be -# behind unrestricted NAT 1:1 when all incoming traffic is NAT-ed and -# routed to WAN interfaces without any filtering. In this cases miniupnpd -# needs to know public IP address and it can be learnt by asking external -# server via STUN protocol. Following option enable retrieving external -# public IP address from STUN server and detection of NAT type. You need -# to specify also external STUN server in stun_host option below. -# This option is disabled by default. -ext_perform_stun=yes -# Specify STUN server, either hostname or IP address -# Some public STUN servers: -# stun.stunprotocol.org -# stun.sipgate.net -# stun.xten.com -# stun.l.google.com (on non standard port 19302) -ext_stun_host={{ stun.host }} -# Specify STUN UDP port, by default it is standard port 3478. -ext_stun_port={{ stun.port }} -{% endif %} diff --git a/data/templates/frr/bfdd.frr.j2 b/data/templates/frr/bfdd.frr.j2 index c4adeb402..f3303e401 100644 --- a/data/templates/frr/bfdd.frr.j2 +++ b/data/templates/frr/bfdd.frr.j2 @@ -13,6 +13,9 @@ bfd {% if profile_config.echo_mode is vyos_defined %} echo-mode {% endif %} +{% if profile_config.minimum_ttl is vyos_defined %} + minimum-ttl {{ profile_config.minimum_ttl }} +{% endif %} {% if profile_config.passive is vyos_defined %} passive-mode {% endif %} @@ -38,6 +41,9 @@ bfd {% if peer_config.echo_mode is vyos_defined %} echo-mode {% endif %} +{% if peer_config.minimum_ttl is vyos_defined %} + minimum-ttl {{ peer_config.minimum_ttl }} +{% endif %} {% if peer_config.passive is vyos_defined %} passive-mode {% endif %} diff --git a/data/templates/grub/grub_vyos_version.j2 b/data/templates/grub/grub_vyos_version.j2 index 62688e68b..de85f1419 100644 --- a/data/templates/grub/grub_vyos_version.j2 +++ b/data/templates/grub/grub_vyos_version.j2 @@ -1,5 +1,10 @@ -{% set boot_opts_default = "boot=live rootdelay=5 noautologin net.ifnames=0 biosdevname=0 vyos-union=/boot/" + version_name %} -{% if boot_opts != '' %} +{% if boot_opts_config is vyos_defined %} +{% if boot_opts_config %} +{% set boot_opts_rendered = boot_opts_default + " " + boot_opts_config %} +{% else %} +{% set boot_opts_rendered = boot_opts_default %} +{% endif %} +{% elif boot_opts != '' %} {% set boot_opts_rendered = boot_opts %} {% else %} {% set boot_opts_rendered = boot_opts_default %} |