summaryrefslogtreecommitdiff
path: root/data/templates
diff options
context:
space:
mode:
Diffstat (limited to 'data/templates')
-rw-r--r--data/templates/ipsec/charon/eap-radius.conf.tmpl115
1 files changed, 115 insertions, 0 deletions
diff --git a/data/templates/ipsec/charon/eap-radius.conf.tmpl b/data/templates/ipsec/charon/eap-radius.conf.tmpl
new file mode 100644
index 000000000..5ec35c988
--- /dev/null
+++ b/data/templates/ipsec/charon/eap-radius.conf.tmpl
@@ -0,0 +1,115 @@
+eap-radius {
+ # Send RADIUS accounting information to RADIUS servers.
+ # accounting = no
+
+ # Close the IKE_SA if there is a timeout during interim RADIUS accounting
+ # updates.
+ # accounting_close_on_timeout = yes
+
+ # Interval in seconds for interim RADIUS accounting updates, if not
+ # specified by the RADIUS server in the Access-Accept message.
+ # accounting_interval = 0
+
+ # If enabled, accounting is disabled unless an IKE_SA has at least one
+ # virtual IP. Only for IKEv2, for IKEv1 a virtual IP is strictly necessary.
+ # accounting_requires_vip = no
+
+ # If enabled, adds the Class attributes received in Access-Accept message to
+ # the RADIUS accounting messages.
+ # accounting_send_class = no
+
+ # Use class attributes in Access-Accept messages as group membership
+ # information.
+ # class_group = no
+
+ # Closes all IKE_SAs if communication with the RADIUS server times out. If
+ # it is not set only the current IKE_SA is closed.
+ # close_all_on_timeout = no
+
+ # Send EAP-Start instead of EAP-Identity to start RADIUS conversation.
+ # eap_start = no
+
+ # Use filter_id attribute as group membership information.
+ # filter_id = no
+
+ # Prefix to EAP-Identity, some AAA servers use a IMSI prefix to select the
+ # EAP method.
+ # id_prefix =
+
+ # Whether to load the plugin. Can also be an integer to increase the
+ # priority of this plugin.
+ load = yes
+
+ # NAS-Identifier to include in RADIUS messages.
+ nas_identifier = {{ remote_access.radius.nas_identifier if remote_access is defined and remote_access.radius is defined and remote_access.radius.nas_identifier is defined else 'strongSwan' }}
+
+ # Port of RADIUS server (authentication).
+ # port = 1812
+
+ # Base to use for calculating exponential back off.
+ # retransmit_base = 1.4
+
+ # Timeout in seconds before sending first retransmit.
+ # retransmit_timeout = 2.0
+
+ # Number of times to retransmit a packet before giving up.
+ # retransmit_tries = 4
+
+ # Shared secret between RADIUS and NAS. If set, make sure to adjust the
+ # permissions of the config file accordingly.
+ # secret =
+
+ # IP/Hostname of RADIUS server.
+ # server =
+
+ # Number of sockets (ports) to use, increase for high load.
+ # sockets = 1
+
+ # Whether to include the UDP port in the Called- and Calling-Station-Id
+ # RADIUS attributes.
+ # station_id_with_port = yes
+
+ dae {
+ # Enables support for the Dynamic Authorization Extension (RFC 5176).
+ # enable = no
+
+ # Address to listen for DAE messages from the RADIUS server.
+ # listen = 0.0.0.0
+
+ # Port to listen for DAE requests.
+ # port = 3799
+
+ # Shared secret used to verify/sign DAE messages. If set, make sure to
+ # adjust the permissions of the config file accordingly.
+ # secret =
+ }
+
+ forward {
+ # RADIUS attributes to be forwarded from IKEv2 to RADIUS.
+ # ike_to_radius =
+
+ # Same as ike_to_radius but from RADIUS to IKEv2.
+ # radius_to_ike =
+ }
+
+ # Section to specify multiple RADIUS servers.
+ servers {
+{% if remote_access is defined and remote_access.radius is defined and remote_access.radius.server is defined %}
+{% for server, server_options in remote_access.radius.server.items() if server_options.disable is not defined %}
+ {{ server | replace('.', '-') }} {
+ address = {{ server }}
+ secret = {{ server_options.key }}
+ auth_port = {{ server_options.port }}
+{% if server_options.disable_accounting is not defined %}
+ acct_port = {{ server_options.port | int +1 }}
+{% endif %}
+ sockets = 20
+ }
+{% endfor %}
+{% endif %}
+ }
+
+ # Section to configure multiple XAuth authentication rounds via RADIUS.
+ xauth {
+ }
+}