summaryrefslogtreecommitdiff
path: root/data
diff options
context:
space:
mode:
Diffstat (limited to 'data')
-rw-r--r--data/templates/dhcp-client/ipv6_new.tmpl47
-rw-r--r--data/templates/macsec/wpa_supplicant.conf.tmpl21
-rw-r--r--data/templates/ntp/ntp.conf.tmpl41
-rw-r--r--data/templates/pppoe/ip-down.script.tmpl14
-rw-r--r--data/templates/pppoe/ip-pre-up.script.tmpl8
-rw-r--r--data/templates/pppoe/ip-up.script.tmpl12
-rw-r--r--data/templates/pppoe/ipv6-up.script.tmpl24
-rw-r--r--data/templates/pppoe/peer.tmpl29
-rw-r--r--data/templates/wwan/ip-down.script.tmpl12
-rw-r--r--data/templates/wwan/ip-pre-up.script.tmpl10
-rw-r--r--data/templates/wwan/ip-up.script.tmpl12
-rw-r--r--data/templates/wwan/peer.tmpl24
12 files changed, 157 insertions, 97 deletions
diff --git a/data/templates/dhcp-client/ipv6_new.tmpl b/data/templates/dhcp-client/ipv6_new.tmpl
new file mode 100644
index 000000000..112431c5f
--- /dev/null
+++ b/data/templates/dhcp-client/ipv6_new.tmpl
@@ -0,0 +1,47 @@
+# generated by dhcp.py
+# man https://www.unix.com/man-page/debian/5/dhcp6c.conf/
+
+interface {{ ifname }} {
+ request domain-name-servers;
+ request domain-name;
+{% if dhcpv6_options is defined %}
+{% if dhcpv6_options.parameters_only is defined %}
+ information-only;
+{% endif %}
+{% if dhcpv6_options.temporary is not defined %}
+ send ia-na 1; # non-temporary address
+{% endif %}
+{% if dhcpv6_options.prefix_delegation is defined %}
+ send ia-pd 2; # prefix delegation
+{% endif %}
+{% endif %}
+};
+
+{% if dhcpv6_options is defined %}
+{% if dhcpv6_options.temporary is not defined %}
+id-assoc na 1 {
+ # Identity association NA
+};
+{% endif %}
+
+{% if dhcpv6_options.prefix_delegation is defined %}
+id-assoc pd 2 {
+{% if dhcpv6_options.prefix_delegation.length is defined %}
+ prefix ::/{{ dhcpv6_options.prefix_delegation.length }} infinity;
+{% endif %}
+{% for interface in dhcpv6_options.prefix_delegation.interface %}
+ prefix-interface {{ interface }} {
+{% if dhcpv6_options.prefix_delegation.interface[interface].sla_id is defined %}
+ sla-id {{ dhcpv6_options.prefix_delegation.interface[interface].sla_id }};
+{% endif %}
+{% if dhcpv6_options.prefix_delegation.interface[interface].sla_len is defined %}
+ sla-len {{ dhcpv6_options.prefix_delegation.interface[interface].sla_len }};
+{% endif %}
+{% if dhcpv6_options.prefix_delegation.interface[interface].address is defined %}
+ ifid {{ dhcpv6_options.prefix_delegation.interface[interface].address }};
+{% endif %}
+ };
+{% endfor %}
+};
+{% endif %}
+{% endif %}
diff --git a/data/templates/macsec/wpa_supplicant.conf.tmpl b/data/templates/macsec/wpa_supplicant.conf.tmpl
index a614d23f5..1731bf160 100644
--- a/data/templates/macsec/wpa_supplicant.conf.tmpl
+++ b/data/templates/macsec/wpa_supplicant.conf.tmpl
@@ -45,9 +45,10 @@ network={
# - the key server has decided to enable MACsec
# 0: Encrypt traffic (default)
# 1: Integrity only
- macsec_integ_only={{ '0' if security_encrypt else '1' }}
+ macsec_integ_only={{ '0' if security is defined and security.encrypt is defined else '1' }}
-{% if security_encrypt %}
+{% if security is defined %}
+{% if security.encrypt is defined %}
# mka_cak, mka_ckn, and mka_priority: IEEE 802.1X/MACsec pre-shared key mode
# This allows to configure MACsec with a pre-shared key using a (CAK,CKN) pair.
# In this mode, instances of wpa_supplicant can act as MACsec peers. The peer
@@ -56,21 +57,22 @@ network={
# hex-string (32 hex-digits) or a 32-byte (256-bit) hex-string (64 hex-digits)
# mka_ckn (CKN = CAK Name) takes a 1..32-bytes (8..256 bit) hex-string
# (2..64 hex-digits)
- mka_cak={{ security_mka_cak }}
- mka_ckn={{ security_mka_ckn }}
+ mka_cak={{ security.mka.cak }}
+ mka_ckn={{ security.mka.ckn }}
# mka_priority (Priority of MKA Actor) is in 0..255 range with 255 being
# default priority
- mka_priority={{ security_mka_priority }}
-{% endif %}
-{% if security_replay_window %}
+ mka_priority={{ security.mka.priority }}
+{% endif %}
+
+{% if security.replay_window is defined %}
# macsec_replay_protect: IEEE 802.1X/MACsec replay protection
# This setting applies only when MACsec is in use, i.e.,
# - macsec_policy is enabled
# - the key server has decided to enable MACsec
# 0: Replay protection disabled (default)
# 1: Replay protection enabled
- macsec_replay_protect={{ '1' if security_replay_window else '0' }}
+ macsec_replay_protect=1
# macsec_replay_window: IEEE 802.1X/MACsec replay protection window
# This determines a window in which replay is tolerated, to allow receipt
@@ -80,7 +82,8 @@ network={
# - the key server has decided to enable MACsec
# 0: No replay window, strict check (default)
# 1..2^32-1: number of packets that could be misordered
- macsec_replay_window={{ security_replay_window }}
+ macsec_replay_window={{ security.replay_window }}
+{% endif %}
{% endif %}
}
diff --git a/data/templates/ntp/ntp.conf.tmpl b/data/templates/ntp/ntp.conf.tmpl
index 52042d218..1c51929fd 100644
--- a/data/templates/ntp/ntp.conf.tmpl
+++ b/data/templates/ntp/ntp.conf.tmpl
@@ -13,26 +13,35 @@ restrict -6 ::1
#
# Configurable section
#
-
-{% if servers -%}
-{% for s in servers -%}
-# Server configuration for: {{ s.name }}
-server {{ s.name }} iburst {{ s.options | join(" ") }}
-{% endfor -%}
+{% if server %}
+{% for srv in server %}
+{% set options = '' %}
+{% set options = options + 'noselect ' if server[srv].noselect is defined else '' %}
+{% set options = options + 'preempt ' if server[srv].preempt is defined else '' %}
+{% set options = options + 'prefer ' if server[srv].prefer is defined else '' %}
+server {{ srv }} iburst {{ options }}
+{% endfor %}
{% endif %}
-{% if allowed_networks -%}
-{% for n in allowed_networks -%}
-# Client configuration for network: {{ n.network }}
-restrict {{ n.address }} mask {{ n.netmask }} nomodify notrap nopeer
-
-{% endfor -%}
+{% if allow_clients is defined and allow_clients.address is defined %}
+# Allowed clients configuration
+{% if allow_clients.address is string %}
+restrict {{ allow_clients.address|address_from_cidr }} mask {{ allow_clients.address|netmask_from_cidr }} nomodify notrap nopeer
+{% else %}
+{% for address in allow_clients.address %}
+restrict {{ address|address_from_cidr }} mask {{ address|netmask_from_cidr }} nomodify notrap nopeer
+{% endfor %}
+{% endif %}
{% endif %}
-{% if listen_address -%}
+{% if listen_address %}
# NTP should listen on configured addresses only
interface ignore wildcard
-{% for a in listen_address -%}
-interface listen {{ a }}
-{% endfor -%}
+{% if listen_address is string %}
+interface listen {{ listen_address }}
+{% else %}
+{% for address in listen_address %}
+interface listen {{ address }}
+{% endfor %}
+{% endif %}
{% endif %}
diff --git a/data/templates/pppoe/ip-down.script.tmpl b/data/templates/pppoe/ip-down.script.tmpl
index 9e6bd2a8e..f69f9fc1a 100644
--- a/data/templates/pppoe/ip-down.script.tmpl
+++ b/data/templates/pppoe/ip-down.script.tmpl
@@ -2,21 +2,21 @@
# As PPPoE is an "on demand" interface we need to re-configure it when it
# becomes up
-if [ "$6" != "{{ intf }}" ]; then
+if [ "$6" != "{{ ifname }}" ]; then
exit
fi
# add some info to syslog
-DIALER_PID=$(cat /var/run/{{ intf }}.pid)
+DIALER_PID=$(cat /var/run/{{ ifname }}.pid)
logger -t pppd[$DIALER_PID] "executing $0"
{% if not on_demand %}
# See https://phabricator.vyos.net/T2248. Determine if we are enslaved to a
# VRF, this is needed to properly insert the default route.
VRF_NAME=""
-if [ -d /sys/class/net/{{ intf }}/upper_* ]; then
+if [ -d /sys/class/net/{{ ifname }}/upper_* ]; then
# Determine upper (VRF) interface
- VRF=$(basename $(ls -d /sys/class/net/{{ intf }}/upper_*))
+ VRF=$(basename $(ls -d /sys/class/net/{{ ifname }}/upper_*))
# Remove upper_ prefix from result string
VRF=${VRF#"upper_"}
# Populate variable to run in VR context
@@ -24,13 +24,13 @@ if [ -d /sys/class/net/{{ intf }}/upper_* ]; then
fi
# Always delete default route when interface goes down
-vtysh -c "conf t" ${VRF_NAME} -c "no ip route 0.0.0.0/0 {{ intf }} ${VRF_NAME}"
+vtysh -c "conf t" ${VRF_NAME} -c "no ip route 0.0.0.0/0 {{ ifname }} ${VRF_NAME}"
{% if ipv6_enable %}
-vtysh -c "conf t" ${VRF_NAME} -c "no ipv6 route ::/0 {{ intf }} ${VRF_NAME}"
+vtysh -c "conf t" ${VRF_NAME} -c "no ipv6 route ::/0 {{ ifname }} ${VRF_NAME}"
{% endif %}
{% endif %}
{% if dhcpv6_pd_interfaces %}
# Start wide dhcpv6 client
-systemctl stop dhcp6c@{{ intf }}.service
+systemctl stop dhcp6c@{{ ifname }}.service
{% endif %}
diff --git a/data/templates/pppoe/ip-pre-up.script.tmpl b/data/templates/pppoe/ip-pre-up.script.tmpl
index 6a2d2af94..cf85ed067 100644
--- a/data/templates/pppoe/ip-pre-up.script.tmpl
+++ b/data/templates/pppoe/ip-pre-up.script.tmpl
@@ -2,17 +2,17 @@
# As PPPoE is an "on demand" interface we need to re-configure it when it
# becomes up
-if [ "$6" != "{{ intf }}" ]; then
+if [ "$6" != "{{ ifname }}" ]; then
exit
fi
# add some info to syslog
-DIALER_PID=$(cat /var/run/{{ intf }}.pid)
+DIALER_PID=$(cat /var/run/{{ ifname }}.pid)
logger -t pppd[$DIALER_PID] "executing $0"
-echo "{{ description }}" > /sys/class/net/{{ intf }}/ifalias
+echo "{{ description }}" > /sys/class/net/{{ ifname }}/ifalias
{% if vrf -%}
logger -t pppd[$DIALER_PID] "configuring dialer interface $6 for VRF {{ vrf }}"
-ip link set dev {{ intf }} master {{ vrf }}
+ip link set dev {{ ifname }} master {{ vrf }}
{% endif %}
diff --git a/data/templates/pppoe/ip-up.script.tmpl b/data/templates/pppoe/ip-up.script.tmpl
index a274296b6..6adea4bd7 100644
--- a/data/templates/pppoe/ip-up.script.tmpl
+++ b/data/templates/pppoe/ip-up.script.tmpl
@@ -2,13 +2,13 @@
# As PPPoE is an "on demand" interface we need to re-configure it when it
# becomes up
-if [ "$6" != "{{ intf }}" ]; then
+if [ "$6" != "{{ ifname }}" ]; then
exit
fi
{% if not on_demand %}
# add some info to syslog
-DIALER_PID=$(cat /var/run/{{ intf }}.pid)
+DIALER_PID=$(cat /var/run/{{ ifname }}.pid)
logger -t pppd[$DIALER_PID] "executing $0"
{% if default_route != 'none' -%}
@@ -17,9 +17,9 @@ logger -t pppd[$DIALER_PID] "executing $0"
SED_OPT="^ip route"
VRF_NAME=""
-if [ -d /sys/class/net/{{ intf }}/upper_* ]; then
+if [ -d /sys/class/net/{{ ifname }}/upper_* ]; then
# Determine upper (VRF) interface
- VRF=$(basename $(ls -d /sys/class/net/{{ intf }}/upper_*))
+ VRF=$(basename $(ls -d /sys/class/net/{{ ifname }}/upper_*))
# Remove upper_ prefix from result string
VRF=${VRF#"upper_"}
# generate new SED command
@@ -43,7 +43,7 @@ done
{% endif %}
# Add default route to default or VRF routing table
-vtysh -c "conf t" ${VTY_OPT} -c "ip route 0.0.0.0/0 {{ intf }} ${VRF_NAME}"
-logger -t pppd[$DIALER_PID] "added default route via {{ intf }} ${VRF_NAME}"
+vtysh -c "conf t" ${VTY_OPT} -c "ip route 0.0.0.0/0 {{ ifname }} ${VRF_NAME}"
+logger -t pppd[$DIALER_PID] "added default route via {{ ifname }} ${VRF_NAME}"
{% endif %}
{% endif %}
diff --git a/data/templates/pppoe/ipv6-up.script.tmpl b/data/templates/pppoe/ipv6-up.script.tmpl
index 097f1d4c3..511e288ea 100644
--- a/data/templates/pppoe/ipv6-up.script.tmpl
+++ b/data/templates/pppoe/ipv6-up.script.tmpl
@@ -3,17 +3,15 @@
# As PPPoE is an "on demand" interface we need to re-configure it when it
# becomes up
-if [ "$6" != "{{ intf }}" ]; then
+if [ "$6" != "{{ ifname }}" ]; then
exit
fi
-set -x
-
{% if ipv6_autoconf -%}
# add some info to syslog
-DIALER_PID=$(cat /var/run/{{ intf }}.pid)
+DIALER_PID=$(cat /var/run/{{ ifname }}.pid)
logger -t pppd[$DIALER_PID] "executing $0"
-logger -t pppd[$DIALER_PID] "configuring interface {{ intf }} via {{ source_interface }}"
+logger -t pppd[$DIALER_PID] "configuring interface {{ ifname }} via {{ source_interface }}"
# Configure interface-specific Host/Router behaviour.
# Note: It is recommended to have the same setting on all interfaces; mixed
@@ -22,7 +20,7 @@ logger -t pppd[$DIALER_PID] "configuring interface {{ intf }} via {{ source_inte
# 0 Forwarding disabled
# 1 Forwarding enabled
#
-echo 1 > /proc/sys/net/ipv6/conf/{{ intf }}/forwarding
+echo 1 > /proc/sys/net/ipv6/conf/{{ ifname }}/forwarding
# Accept Router Advertisements; autoconfigure using them.
#
@@ -36,15 +34,15 @@ echo 1 > /proc/sys/net/ipv6/conf/{{ intf }}/forwarding
# 2 Overrule forwarding behaviour. Accept Router Advertisements
# even if forwarding is enabled.
#
-echo 2 > /proc/sys/net/ipv6/conf/{{ intf }}/accept_ra
+echo 2 > /proc/sys/net/ipv6/conf/{{ ifname }}/accept_ra
# Autoconfigure addresses using Prefix Information in Router Advertisements.
-echo 1 > /proc/sys/net/ipv6/conf/{{ intf }}/autoconf
+echo 1 > /proc/sys/net/ipv6/conf/{{ ifname }}/autoconf
{% endif %}
{% if dhcpv6_pd_interfaces %}
# Start wide dhcpv6 client
-systemctl start dhcp6c@{{ intf }}.service
+systemctl start dhcp6c@{{ ifname }}.service
{% endif %}
@@ -54,9 +52,9 @@ systemctl start dhcp6c@{{ intf }}.service
SED_OPT="^ipv6 route"
VRF_NAME=""
-if [ -d /sys/class/net/{{ intf }}/upper_* ]; then
+if [ -d /sys/class/net/{{ ifname }}/upper_* ]; then
# Determine upper (VRF) interface
- VRF=$(basename $(ls -d /sys/class/net/{{ intf }}/upper_*))
+ VRF=$(basename $(ls -d /sys/class/net/{{ ifname }}/upper_*))
# Remove upper_ prefix from result string
VRF=${VRF#"upper_"}
# generate new SED command
@@ -80,8 +78,8 @@ done
{% endif %}
# Add default route to default or VRF routing table
-vtysh -c "conf t" ${VTY_OPT} -c "ipv6 route ::/0 {{ intf }} ${VRF_NAME}"
-logger -t pppd[$DIALER_PID] "added default route via {{ intf }} ${VRF_NAME}"
+vtysh -c "conf t" ${VTY_OPT} -c "ipv6 route ::/0 {{ ifname }} ${VRF_NAME}"
+logger -t pppd[$DIALER_PID] "added default route via {{ ifname }} ${VRF_NAME}"
{% endif %}
diff --git a/data/templates/pppoe/peer.tmpl b/data/templates/pppoe/peer.tmpl
index fb85265b2..e909843a5 100644
--- a/data/templates/pppoe/peer.tmpl
+++ b/data/templates/pppoe/peer.tmpl
@@ -40,32 +40,37 @@ maxfail 0
plugin rp-pppoe.so
{{ source_interface }}
persist
-ifname {{ intf }}
-ipparam {{ intf }}
+ifname {{ ifname }}
+ipparam {{ ifname }}
debug
mtu {{ mtu }}
mru {{ mtu }}
-user "{{ auth_username }}"
-password "{{ auth_password }}"
-{% if name_server -%}
-usepeerdns
+
+{% if authentication is defined %}
+{{ "user " + authentication.user if authentication.user is defined }}
+{{ "password " + authentication.password if authentication.password is defined }}
{% endif %}
-{% if ipv6_enable -%}
+
+{{ "usepeerdns" if no_peer_dns is not defined }}
+
+{% if ipv6 is defined and ipv6.enable is defined -%}
+ipv6
ipv6cp-use-ipaddr
{% endif %}
-{% if service_name -%}
+
+{% if service_name is defined -%}
rp_pppoe_service "{{ service_name }}"
{% endif %}
-{% if on_demand %}
+
+{% if connect_on_demand is defined %}
demand
# See T2249. PPP default route options should only be set when in on-demand
# mode. As soon as we are not in on-demand mode the default-route handling is
# passed to the ip-up.d/ip-down.s scripts which is required for VRF support.
-{% if 'auto' in default_route -%}
+{% if 'auto' in default_route -%}
defaultroute
-{% elif 'force' in default_route -%}
+{% elif 'force' in default_route -%}
defaultroute
replacedefaultroute
-{% endif %}
+{% endif %}
{% endif %}
diff --git a/data/templates/wwan/ip-down.script.tmpl b/data/templates/wwan/ip-down.script.tmpl
index f7b38cbc5..9dc15ea99 100644
--- a/data/templates/wwan/ip-down.script.tmpl
+++ b/data/templates/wwan/ip-down.script.tmpl
@@ -11,17 +11,17 @@ fi
# Determine if we are running inside a VRF or not, required for proper routing table
# NOTE: the down script can not be properly templated as we need the VRF name,
# which is not present on deletion, thus we read it from the operating system.
-if [ -d /sys/class/net/{{ intf }}/upper_* ]; then
+if [ -d /sys/class/net/{{ ifname }}/upper_* ]; then
# Determine upper (VRF) interface
- VRF=$(basename $(ls -d /sys/class/net/{{ intf }}/upper_*))
+ VRF=$(basename $(ls -d /sys/class/net/{{ ifname }}/upper_*))
# Remove upper_ prefix from result string
VRF_NAME=${VRF#"upper_"}
# Remove default route from VRF routing table
- vtysh -c "conf t" -c "vrf ${VRF_NAME}" -c "no ip route 0.0.0.0/0 {{ intf }}"
+ vtysh -c "conf t" -c "vrf ${VRF_NAME}" -c "no ip route 0.0.0.0/0 {{ ifname }}"
else
# Remove default route from GRT (global routing table)
- vtysh -c "conf t" -c "no ip route 0.0.0.0/0 {{ intf }}"
+ vtysh -c "conf t" -c "no ip route 0.0.0.0/0 {{ ifname }}"
fi
-DIALER_PID=$(cat /var/run/{{ intf }}.pid)
-logger -t pppd[$DIALER_PID] "removed default route via {{ intf }} metric {{ metric }}"
+DIALER_PID=$(cat /var/run/{{ ifname }}.pid)
+logger -t pppd[$DIALER_PID] "removed default route via {{ ifname }} metric {{ backup.distance }}"
diff --git a/data/templates/wwan/ip-pre-up.script.tmpl b/data/templates/wwan/ip-pre-up.script.tmpl
index 7a17a1c71..efc065bad 100644
--- a/data/templates/wwan/ip-pre-up.script.tmpl
+++ b/data/templates/wwan/ip-pre-up.script.tmpl
@@ -7,17 +7,17 @@ ipparam=$6
# device name and metric are received using ipparam
device=`echo "$ipparam"|awk '{ print $1 }'`
-if [ "$device" != "{{ intf }}" ]; then
+if [ "$device" != "{{ ifname }}" ]; then
exit
fi
# add some info to syslog
-DIALER_PID=$(cat /var/run/{{ intf }}.pid)
+DIALER_PID=$(cat /var/run/{{ ifname }}.pid)
logger -t pppd[$DIALER_PID] "executing $0"
-echo "{{ description }}" > /sys/class/net/{{ intf }}/ifalias
+echo "{{ description }}" > /sys/class/net/{{ ifname }}/ifalias
{% if vrf -%}
-logger -t pppd[$DIALER_PID] "configuring interface {{ intf }} for VRF {{ vrf }}"
-ip link set dev {{ intf }} master {{ vrf }}
+logger -t pppd[$DIALER_PID] "configuring interface {{ ifname }} for VRF {{ vrf }}"
+ip link set dev {{ ifname }} master {{ vrf }}
{% endif %}
diff --git a/data/templates/wwan/ip-up.script.tmpl b/data/templates/wwan/ip-up.script.tmpl
index 3a7eec800..2603a0286 100644
--- a/data/templates/wwan/ip-up.script.tmpl
+++ b/data/templates/wwan/ip-up.script.tmpl
@@ -9,17 +9,17 @@ if [ -z $(echo $2 | egrep "(ttyS[0-9]+|usb[0-9]+b.*)$") ]; then
fi
# Determine if we are running inside a VRF or not, required for proper routing table
-if [ -d /sys/class/net/{{ intf }}/upper_* ]; then
+if [ -d /sys/class/net/{{ ifname }}/upper_* ]; then
# Determine upper (VRF) interface
- VRF=$(basename $(ls -d /sys/class/net/{{ intf }}/upper_*))
+ VRF=$(basename $(ls -d /sys/class/net/{{ ifname }}/upper_*))
# Remove upper_ prefix from result string
VRF_NAME=${VRF#"upper_"}
# Remove default route from VRF routing table
- vtysh -c "conf t" -c "vrf ${VRF_NAME}" -c "ip route 0.0.0.0/0 {{ intf }} {{ metric }}"
+ vtysh -c "conf t" -c "vrf ${VRF_NAME}" -c "ip route 0.0.0.0/0 {{ ifname }} {{ backup.distance }}"
else
# Remove default route from GRT (global routing table)
- vtysh -c "conf t" -c "ip route 0.0.0.0/0 {{ intf }} {{ metric }}"
+ vtysh -c "conf t" -c "ip route 0.0.0.0/0 {{ ifname }} {{ backup.distance }}"
fi
-DIALER_PID=$(cat /var/run/{{ intf }}.pid)
-logger -t pppd[$DIALER_PID] "added default route via {{ intf }} metric {{ metric }} ${VRF_NAME}"
+DIALER_PID=$(cat /var/run/{{ ifname }}.pid)
+logger -t pppd[$DIALER_PID] "added default route via {{ ifname }} metric {{ backup.distance }} ${VRF_NAME}"
diff --git a/data/templates/wwan/peer.tmpl b/data/templates/wwan/peer.tmpl
index 0168283fd..aa759f741 100644
--- a/data/templates/wwan/peer.tmpl
+++ b/data/templates/wwan/peer.tmpl
@@ -1,19 +1,18 @@
### Autogenerated by interfaces-wirelessmodem.py ###
-{% if description %}
-# {{ description }}
-{% endif %}
-ifname {{ intf }}
-ipparam {{ intf }}
-linkname {{ intf }}
-{% if name_server -%}
-usepeerdns
-{%- endif %}
+{{ "# description: " + description if description is defined }}
+ifname {{ ifname }}
+ipparam {{ ifname }}
+linkname {{ ifname }}
+{{ "usepeerdns" if no_peer_dns is defined }}
# physical device
{{ device }}
lcp-echo-failure 0
115200
debug
+debug
+mtu {{ mtu }}
+mru {{ mtu }}
nodefaultroute
ipcp-max-failure 4
ipcp-accept-local
@@ -22,8 +21,7 @@ noauth
crtscts
lock
persist
-{% if on_demand -%}
-demand
-{%- endif %}
+{{ "demand" if ondemand is defined }}
+
+connect '/usr/sbin/chat -v -t6 -f /etc/ppp/peers/chat.{{ ifname }}'
-connect '/usr/sbin/chat -v -t6 -f {{ chat_script }}'
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 18:50:54 +0000