diff options
Diffstat (limited to 'data')
22 files changed, 483 insertions, 381 deletions
diff --git a/data/templates/accel-ppp/ipoe.config.tmpl b/data/templates/accel-ppp/ipoe.config.tmpl index 84de5bf51..fca520efa 100644 --- a/data/templates/accel-ppp/ipoe.config.tmpl +++ b/data/templates/accel-ppp/ipoe.config.tmpl @@ -77,7 +77,7 @@ chap-secrets={{ chap_secrets_file }} [radius] verbose=1 {% for r in radius_server %} -server={{ r.server }},{{ r.key }},auth-port={{ r.port }},req-limit=0,fail-time={{ r.fail_time }} +server={{ r.server }},{{ r.key }},auth-port={{ r.port }},acct-port={{ r.acct_port }},req-limit=0,fail-time={{ r.fail_time }} {% endfor -%} acct-timeout={{ radius_acct_tmo }} diff --git a/data/templates/accel-ppp/l2tp.config.tmpl b/data/templates/accel-ppp/l2tp.config.tmpl index b0ef17525..b9131684d 100644 --- a/data/templates/accel-ppp/l2tp.config.tmpl +++ b/data/templates/accel-ppp/l2tp.config.tmpl @@ -83,7 +83,7 @@ chap-secrets={{ chap_secrets_file }} [radius] verbose=1 {% for r in radius_server %} -server={{ r.server }},{{ r.key }},auth-port={{ r.port }},req-limit=0,fail-time={{ r.fail_time }} +server={{ r.server }},{{ r.key }},auth-port={{ r.port }},acct-port={{ r.acct_port }},req-limit=0,fail-time={{ r.fail_time }} {% endfor -%} acct-timeout={{ radius_acct_tmo }} diff --git a/data/templates/accel-ppp/pppoe.config.tmpl b/data/templates/accel-ppp/pppoe.config.tmpl index 370ca7946..5ad628fde 100644 --- a/data/templates/accel-ppp/pppoe.config.tmpl +++ b/data/templates/accel-ppp/pppoe.config.tmpl @@ -93,7 +93,7 @@ chap-secrets={{ chap_secrets_file }} [radius] verbose=1 {% for r in radius_server %} -server={{ r.server }},{{ r.key }},auth-port={{ r.port }},req-limit=0,fail-time={{ r.fail_time }} +server={{ r.server }},{{ r.key }},auth-port={{ r.port }},acct-port={{ r.acct_port }},req-limit=0,fail-time={{ r.fail_time }} {% endfor -%} acct-timeout={{ radius_acct_tmo }} diff --git a/data/templates/accel-ppp/pptp.config.tmpl b/data/templates/accel-ppp/pptp.config.tmpl index 0bbfc13c5..e0f2c6da9 100644 --- a/data/templates/accel-ppp/pptp.config.tmpl +++ b/data/templates/accel-ppp/pptp.config.tmpl @@ -66,7 +66,7 @@ chap-secrets={{ chap_secrets_file }} [radius] verbose=1 {% for r in radius_server %} -server={{ r.server }},{{ r.key }},auth-port={{ r.port }},req-limit=0,fail-time={{ r.fail_time }} +server={{ r.server }},{{ r.key }},auth-port={{ r.port }},acct-port={{ r.acct_port }},req-limit=0,fail-time={{ r.fail_time }} {% endfor -%} acct-timeout={{ radius_acct_tmo }} diff --git a/data/templates/accel-ppp/sstp.config.tmpl b/data/templates/accel-ppp/sstp.config.tmpl index 2c8c00023..c9e4a1d7d 100644 --- a/data/templates/accel-ppp/sstp.config.tmpl +++ b/data/templates/accel-ppp/sstp.config.tmpl @@ -69,7 +69,7 @@ chap-secrets={{ chap_secrets_file }} [radius] verbose=1 {% for r in radius_server %} -server={{ r.server }},{{ r.key }},auth-port={{ r.port }},req-limit=0,fail-time={{ r.fail_time }} +server={{ r.server }},{{ r.key }},auth-port={{ r.port }},acct-port={{ r.acct_port }},req-limit=0,fail-time={{ r.fail_time }} {% endfor -%} acct-timeout={{ radius_acct_tmo }} diff --git a/data/templates/dhcp-client/daemon-options.tmpl b/data/templates/dhcp-client/daemon-options.tmpl index 12786b777..290aefa49 100644 --- a/data/templates/dhcp-client/daemon-options.tmpl +++ b/data/templates/dhcp-client/daemon-options.tmpl @@ -1 +1,4 @@ -DHCLIENT_OPTS="-nw -cf {{ conf_file }} -pf {{ pid_file }} -lf {{ lease_file }} {{ '-S' if dhcpv6_prm_only }} {{ '-T' if dhcpv6_temporary }} {{ ifname }}" +### Autogenerated by interface.py ### + +DHCLIENT_OPTS="-nw -cf /var/lib/dhcp/dhclient_{{ifname}}.conf -pf /var/lib/dhcp/dhclient_{{ifname}}.pid -lf /var/lib/dhcp/dhclient_{{ifname}}.leases {{ifname}}" + diff --git a/data/templates/dhcp-client/ipv4.tmpl b/data/templates/dhcp-client/ipv4.tmpl index ab772b5f6..8a44a9761 100644 --- a/data/templates/dhcp-client/ipv4.tmpl +++ b/data/templates/dhcp-client/ipv4.tmpl @@ -1,17 +1,19 @@ -# generated by dhcp.py +### Autogenerated by interface.py ### + option rfc3442-classless-static-routes code 121 = array of unsigned integer 8; timeout 60; retry 300; interface "{{ ifname }}" { - send host-name "{{ hostname }}"; - {% if client_id -%} - send dhcp-client-identifier "{{ client_id }}"; - {% endif -%} - {% if vendor_class_id -%} - send vendor-class-identifier "{{ vendor_class_id }}"; - {% endif -%} - request subnet-mask, broadcast-address, routers, domain-name-servers, - rfc3442-classless-static-routes, domain-name, interface-mtu; - require subnet-mask; + send host-name "{{ dhcp_options.host_name }}"; +{% if dhcp_options.client_id is defined and dhcp_options.client_id is not none %} + send dhcp-client-identifier "{{ dhcp_options.client_id }}"; +{% endif %} +{% if dhcp_options.vendor_class_id is defined and dhcp_options.vendor_class_id is not none %} + send vendor-class-identifier "{{ dhcp_options.vendor_class_id }}"; +{% endif %} + request subnet-mask, broadcast-address, routers, domain-name-servers, + rfc3442-classless-static-routes, domain-name, interface-mtu; + require subnet-mask; } + diff --git a/data/templates/dhcp-client/ipv6.tmpl b/data/templates/dhcp-client/ipv6.tmpl index 490f14726..5c0cea280 100644 --- a/data/templates/dhcp-client/ipv6.tmpl +++ b/data/templates/dhcp-client/ipv6.tmpl @@ -1,44 +1,48 @@ -# generated by dhcp.py -# man https://www.unix.com/man-page/debian/5/dhcp6c.conf/ +### Autogenerated by interface.py ### +# man https://www.unix.com/man-page/debian/5/dhcp6c.conf/ interface {{ ifname }} { request domain-name-servers; request domain-name; -{% if dhcpv6_prm_only %} +{% if dhcpv6_options is defined %} +{% if dhcpv6_options.parameters_only is defined %} information-only; -{% endif %} -{% if not dhcpv6_temporary %} +{% endif %} +{% if dhcpv6_options.temporary is not defined %} send ia-na 1; # non-temporary address -{% endif %} -{% if dhcpv6_pd_interfaces %} +{% endif %} +{% if dhcpv6_options.prefix_delegation is defined %} send ia-pd 2; # prefix delegation +{% endif %} {% endif %} }; -{% if not dhcpv6_temporary %} +{% if dhcpv6_options is defined %} +{% if dhcpv6_options.temporary is not defined %} id-assoc na 1 { # Identity association NA }; -{% endif %} +{% endif %} -{% if dhcpv6_pd_interfaces %} +{% if dhcpv6_options.prefix_delegation is defined %} id-assoc pd 2 { -{% if dhcpv6_pd_length %} - prefix ::/{{ dhcpv6_pd_length }} infinity; -{% endif %} -{% for intf in dhcpv6_pd_interfaces %} - prefix-interface {{ intf.ifname }} { -{% if intf.sla_id %} - sla-id {{ intf.sla_id }}; -{% endif %} -{% if intf.sla_len %} - sla-len {{ intf.sla_len }}; -{% endif %} -{% if intf.if_id %} - ifid {{ intf.if_id }}; -{% endif %} +{% if dhcpv6_options.prefix_delegation.length is defined %} + prefix ::/{{ dhcpv6_options.prefix_delegation.length }} infinity; +{% endif %} +{% for interface in dhcpv6_options.prefix_delegation.interface %} + prefix-interface {{ interface }} { +{% if dhcpv6_options.prefix_delegation.interface[interface].sla_id is defined %} + sla-id {{ dhcpv6_options.prefix_delegation.interface[interface].sla_id }}; +{% endif %} +{% if dhcpv6_options.prefix_delegation.interface[interface].sla_len is defined %} + sla-len {{ dhcpv6_options.prefix_delegation.interface[interface].sla_len }}; +{% endif %} +{% if dhcpv6_options.prefix_delegation.interface[interface].address is defined %} + ifid {{ dhcpv6_options.prefix_delegation.interface[interface].address }}; +{% endif %} }; -{% endfor %} +{% endfor %} }; -{% endif %} +{% endif %} +{% endif %} diff --git a/data/templates/dhcp-client/ipv6_new.tmpl b/data/templates/dhcp-client/ipv6_new.tmpl deleted file mode 100644 index 112431c5f..000000000 --- a/data/templates/dhcp-client/ipv6_new.tmpl +++ /dev/null @@ -1,47 +0,0 @@ -# generated by dhcp.py -# man https://www.unix.com/man-page/debian/5/dhcp6c.conf/ - -interface {{ ifname }} { - request domain-name-servers; - request domain-name; -{% if dhcpv6_options is defined %} -{% if dhcpv6_options.parameters_only is defined %} - information-only; -{% endif %} -{% if dhcpv6_options.temporary is not defined %} - send ia-na 1; # non-temporary address -{% endif %} -{% if dhcpv6_options.prefix_delegation is defined %} - send ia-pd 2; # prefix delegation -{% endif %} -{% endif %} -}; - -{% if dhcpv6_options is defined %} -{% if dhcpv6_options.temporary is not defined %} -id-assoc na 1 { - # Identity association NA -}; -{% endif %} - -{% if dhcpv6_options.prefix_delegation is defined %} -id-assoc pd 2 { -{% if dhcpv6_options.prefix_delegation.length is defined %} - prefix ::/{{ dhcpv6_options.prefix_delegation.length }} infinity; -{% endif %} -{% for interface in dhcpv6_options.prefix_delegation.interface %} - prefix-interface {{ interface }} { -{% if dhcpv6_options.prefix_delegation.interface[interface].sla_id is defined %} - sla-id {{ dhcpv6_options.prefix_delegation.interface[interface].sla_id }}; -{% endif %} -{% if dhcpv6_options.prefix_delegation.interface[interface].sla_len is defined %} - sla-len {{ dhcpv6_options.prefix_delegation.interface[interface].sla_len }}; -{% endif %} -{% if dhcpv6_options.prefix_delegation.interface[interface].address is defined %} - ifid {{ dhcpv6_options.prefix_delegation.interface[interface].address }}; -{% endif %} - }; -{% endfor %} -}; -{% endif %} -{% endif %} diff --git a/data/templates/frr/bgp.frr.tmpl b/data/templates/frr/bgp.frr.tmpl index cd6f31c93..cdf4cb4fe 100644 --- a/data/templates/frr/bgp.frr.tmpl +++ b/data/templates/frr/bgp.frr.tmpl @@ -1 +1 @@ -!
+! diff --git a/data/templates/lcd/LCDd.conf.tmpl b/data/templates/lcd/LCDd.conf.tmpl new file mode 100644 index 000000000..da749d04a --- /dev/null +++ b/data/templates/lcd/LCDd.conf.tmpl @@ -0,0 +1,126 @@ +### Autogenerted by system-display.py ## + +# LCDd.conf -- configuration file for the LCDproc server daemon LCDd +# +# This file contains the configuration for the LCDd server. +# +# The format is ini-file-like. It is divided into sections that start at +# markers that look like [section]. Comments are all line-based comments, +# and are lines that start with '#' or ';'. +# +# The server has a 'central' section named [server]. For the menu there is +# a section called [menu]. Further each driver has a section which +# defines how the driver acts. +# +# The drivers are activated by specifying them in a driver= line in the +# server section, like: +# +# Driver=curses +# +# This tells LCDd to use the curses driver. +# The first driver that is loaded and is capable of output defines the +# size of the display. The default driver to use is curses. +# If the driver is specified using the -d <driver> command line option, +# the Driver= options in the config file are ignored. +# +# The drivers read their own options from the respective sections. + +## Server section with all kinds of settings for the LCDd server ## +[server] + +# Where can we find the driver modules ? +# NOTE: Always place a slash as last character ! +DriverPath=/usr/lib/x86_64-linux-gnu/lcdproc/ + +# Tells the server to load the given drivers. Multiple lines can be given. +# The name of the driver is case sensitive and determines the section +# where to look for further configuration options of the specific driver +# as well as the name of the dynamic driver module to load at runtime. +# The latter one can be changed by giving a File= directive in the +# driver specific section. +# +# The following drivers are supported: +# bayrad, CFontz, CFontzPacket, curses, CwLnx, ea65, EyeboxOne, futaba, +# g15, glcd, glcdlib, glk, hd44780, icp_a106, imon, imonlcd,, IOWarrior, +# irman, joy, lb216, lcdm001, lcterm, linux_input, lirc, lis, MD8800, +# mdm166a, ms6931, mtc_s16209x, MtxOrb, mx5000, NoritakeVFD, +# Olimex_MOD_LCD1x9, picolcd, pyramid, rawserial, sdeclcd, sed1330, +# sed1520, serialPOS, serialVFD, shuttleVFD, sli, stv5730, svga, t6963, +# text, tyan, ula200, vlsys_m428, xosd, yard2LCD + +{% if model is defined and model.startswith('CFA-') %} +Driver=CFontzPacket +{% endif %} + +# Tells the driver to bind to the given interface. [default: 127.0.0.1] +Bind=127.0.0.1 + +# Listen on this specified port. [default: 13666] +Port=13666 + +# Sets the reporting level; defaults to warnings and errors only. +# [default: 2; legal: 0-5] +ReportLevel=3 + +# Should we report to syslog instead of stderr? [default: no; legal: yes, no] +ReportToSyslog=yes + +# User to run as. LCDd will drop its root privileges and run as this user +# instead. [default: nobody] +User=nobody + +# The server will stay in the foreground if set to yes. +# [default: no, legal: yes, no] +Foreground=yes + +# Hello message: each entry represents a display line; default: builtin +Hello="Starting VyOS" +Hello=" ... " + +# GoodBye message: each entry represents a display line; default: builtin +GoodBye=" VyOS shutting" +GoodBye=" down... " + +# Sets the interval in microseconds for updating the display. +# [default: 125000 meaning 8Hz] +FrameInterval=250000 # 4 updates per second + +# Sets the default time in seconds to displays a screen. [default: 4] +WaitTime=1 + +# If set to no, LCDd will start with screen rotation disabled. This has the +# same effect as if the ToggleRotateKey had been pressed. Rotation will start +# if the ToggleRotateKey is pressed. Note that this setting does not turn off +# priority sorting of screens. [default: on; legal: on, off] +AutoRotate=on + +# If yes, the the serverscreen will be rotated as a usual info screen. If no, +# it will be a background screen, only visible when no other screens are +# active. The special value 'blank' is similar to no, but only a blank screen +# is displayed. [default: on; legal: on, off, blank] +ServerScreen=blank + +# Set master backlight setting. If set to 'open' a client may control the +# backlight for its own screens (only). [default: open; legal: off, open, on] +Backlight=on + +# Set master heartbeat setting. If set to 'open' a client may control the +# heartbeat for its own screens (only). [default: open; legal: off, open, on] +Heartbeat=off + +# set title scrolling speed [default: 10; legal: 0-10] +TitleSpeed=10 + +{% if model is defined and model is not none %} +{% if model.startswith('CFA-') %} +## CrystalFontz packet driver (for CFA533, CFA631, CFA633 & CFA635) ## +[CFontzPacket] +Model={{ model.split('-')[1] }} +Device={{ device }} +Contrast=350 +Brightness=500 +OffBrightness=50 +Reboot=yes +USB=yes +{% endif %} +{% endif %} diff --git a/data/templates/lcd/lcdproc.conf.tmpl b/data/templates/lcd/lcdproc.conf.tmpl new file mode 100644 index 000000000..c79f3cd0d --- /dev/null +++ b/data/templates/lcd/lcdproc.conf.tmpl @@ -0,0 +1,60 @@ +### autogenerated by system-lcd.py ### + +# LCDproc client configuration file + +[lcdproc] +Server=127.0.0.1 +Port=13666 + +# set reporting level +ReportLevel=3 + +# report to to syslog ? +ReportToSyslog=true + +Foreground=yes + +[CPU] +Active=true +OnTime=1 +OffTime=2 +ShowInvisible=false + +[SMP-CPU] +Active=false + +[Memory] +Active=false + +[Load] +Active=false + +[Uptime] +Active=true + +[ProcSize] +Active=false + +[Disk] +Active=false + +[About] +Active=false + +[TimeDate] +Active=true +TimeFormat="%H:%M:%S" + +[OldTime] +Active=false + +[BigClock] +Active=false + +[MiniClock] +Active=false + +# Display the title bar in two-line mode. Note that with four lines or more +# the title is always shown. [default: true; legal: true, false] +ShowTitle=false + diff --git a/data/templates/mdns-repeater/mdns-repeater.tmpl b/data/templates/mdns-repeater/mdns-repeater.tmpl index 3fc4db67e..80f4ab047 100644 --- a/data/templates/mdns-repeater/mdns-repeater.tmpl +++ b/data/templates/mdns-repeater/mdns-repeater.tmpl @@ -1,2 +1,2 @@ ### Autogenerated by mdns_repeater.py ### -DAEMON_ARGS="{{ interfaces | join(' ') }}" +DAEMON_ARGS="{{ interface | join(' ') }}" diff --git a/data/templates/ntp/ntp.conf.tmpl b/data/templates/ntp/ntp.conf.tmpl index 1c51929fd..6ef0c0f2c 100644 --- a/data/templates/ntp/ntp.conf.tmpl +++ b/data/templates/ntp/ntp.conf.tmpl @@ -19,7 +19,7 @@ restrict -6 ::1 {% set options = options + 'noselect ' if server[srv].noselect is defined else '' %} {% set options = options + 'preempt ' if server[srv].preempt is defined else '' %} {% set options = options + 'prefer ' if server[srv].prefer is defined else '' %} -server {{ srv }} iburst {{ options }} +server {{ srv | replace('_', '-') }} iburst {{ options }} {% endfor %} {% endif %} diff --git a/data/templates/router-advert/radvd.conf.tmpl b/data/templates/router-advert/radvd.conf.tmpl index 073623eac..cebfc54b5 100644 --- a/data/templates/router-advert/radvd.conf.tmpl +++ b/data/templates/router-advert/radvd.conf.tmpl @@ -1,37 +1,47 @@ ### Autogenerated by service_router-advert.py ### -{% for i in interfaces -%} -interface {{ i.name }} { +{% if interface is defined and interface is not none %} +{% for iface in interface %} +interface {{ iface }} { IgnoreIfMissing on; - AdvDefaultPreference {{ i.default_preference }}; - AdvManagedFlag {{ i.managed_flag }}; - MaxRtrAdvInterval {{ i.interval_max }}; -{% if i.interval_min %} - MinRtrAdvInterval {{ i.interval_min }}; -{% endif %} - AdvReachableTime {{ i.reachable_time }}; - AdvIntervalOpt {{ i.send_advert }}; - AdvSendAdvert {{ i.send_advert }}; -{% if i.default_lifetime %} - AdvDefaultLifetime {{ i.default_lifetime }}; -{% endif %} -{% if i.link_mtu %} - AdvLinkMTU {{ i.link_mtu }}; -{% endif %} - AdvOtherConfigFlag {{ i.other_config_flag }}; - AdvRetransTimer {{ i.retrans_timer }}; - AdvCurHopLimit {{ i.hop_limit }}; -{% for p in i.prefixes %} - prefix {{ p.prefix }} { - AdvAutonomous {{ p.autonomous_flag }}; - AdvValidLifetime {{ p.valid_lifetime }}; - AdvOnLink {{ p.on_link }}; - AdvPreferredLifetime {{ p.preferred_lifetime }}; +{% if interface[iface].default_preference is defined and interface[iface].default_preference is not none %} + AdvDefaultPreference {{ interface[iface].default_preference }}; +{% endif %} +{% if interface[iface].managed_flag is defined and interface[iface].managed_flag is not none %} + AdvManagedFlag {{ 'on' if interface[iface].managed_flag is defined else 'off' }}; +{% endif %} +{% if interface[iface].interval.max is defined and interface[iface].interval.max is not none %} + MaxRtrAdvInterval {{ interface[iface].interval.max }}; +{% endif %} +{% if interface[iface].interval.min is defined and interface[iface].interval.min is not none %} + MinRtrAdvInterval {{ interface[iface].interval.min }}; +{% endif %} +{% if interface[iface].reachable_time is defined and interface[iface].reachable_time is not none %} + AdvReachableTime {{ interface[iface].reachable_time }}; +{% endif %} + AdvIntervalOpt {{ 'off' if interface[iface].no_send_advert is defined else 'on' }}; + AdvSendAdvert {{ 'off' if interface[iface].no_send_advert is defined else 'on' }}; +{% if interface[iface].default_lifetime is defined %} + AdvDefaultLifetime {{ interface[iface].default_lifetime }}; +{% endif %} +{% if interface[iface].link_mtu is defined %} + AdvLinkMTU {{ interface[iface].link_mtu }}; +{% endif %} + AdvOtherConfigFlag {{ 'on' if interface[iface].other_config_flag is defined else 'off' }}; + AdvRetransTimer {{ interface[iface].retrans_timer }}; + AdvCurHopLimit {{ interface[iface].hop_limit }}; +{% for prefix in interface[iface].prefix %} + prefix {{ prefix }} { + AdvAutonomous {{ 'off' if interface[iface].prefix[prefix].no_autonomous_flag is defined else 'on' }}; + AdvValidLifetime {{ interface[iface].prefix[prefix].valid_lifetime }}; + AdvOnLink {{ 'off' if interface[iface].prefix[prefix].no_on_link_flag is defined else 'on' }}; + AdvPreferredLifetime {{ interface[iface].prefix[prefix].preferred_lifetime }}; }; -{% endfor %} -{% if i.name_server %} - RDNSS {{ i.name_server | join(" ") }} { +{% endfor %} +{% if interface[iface].name_server is defined %} + RDNSS {{ interface[iface].name_server | join(" ") }} { }; -{% endif %} +{% endif %} }; -{% endfor -%} +{% endfor -%} +{% endif %} diff --git a/data/templates/ssh/override.conf.tmpl b/data/templates/ssh/override.conf.tmpl index 4276366ae..843aa927b 100644 --- a/data/templates/ssh/override.conf.tmpl +++ b/data/templates/ssh/override.conf.tmpl @@ -2,9 +2,10 @@ [Unit] StartLimitIntervalSec=0 After=vyos-router.service +ConditionPathExists={{config_file}} [Service] ExecStart= -ExecStart={{vrf_command}}/usr/sbin/sshd -D $SSHD_OPTS +ExecStart={{vrf_command}}/usr/sbin/sshd -f {{config_file}} -D $SSHD_OPTS RestartSec=10 diff --git a/data/templates/system/curlrc.tmpl b/data/templates/system/curlrc.tmpl index 675e35a0c..3e5ce801c 100644 --- a/data/templates/system/curlrc.tmpl +++ b/data/templates/system/curlrc.tmpl @@ -1,8 +1,8 @@ -{% if http_client is defined %}
-{% if http_client.source_interface is defined %}
---interface "{{ http_client.source_interface }}"
-{% endif %}
-{% if http_client.source_address is defined %}
---interface "{{ http_client.source_address }}"
-{% endif %}
-{% endif %}
+{% if http_client is defined %} +{% if http_client.source_interface is defined %} +--interface "{{ http_client.source_interface }}" +{% endif %} +{% if http_client.source_address is defined %} +--interface "{{ http_client.source_address }}" +{% endif %} +{% endif %} diff --git a/data/templates/system/ssh_config.tmpl b/data/templates/system/ssh_config.tmpl new file mode 100644 index 000000000..509bd5479 --- /dev/null +++ b/data/templates/system/ssh_config.tmpl @@ -0,0 +1,3 @@ +{% if ssh_client is defined and ssh_client.source_address is defined and ssh_client.source_address is not none %}
+BindAddress {{ ssh_client.source_address }}
+{% endif %}
diff --git a/data/templates/wifi/cfg80211.conf.tmpl b/data/templates/wifi/cfg80211.conf.tmpl index b21bacc1e..91df57aab 100644 --- a/data/templates/wifi/cfg80211.conf.tmpl +++ b/data/templates/wifi/cfg80211.conf.tmpl @@ -1,3 +1 @@ -{%- if regdom -%} -options cfg80211 ieee80211_regdom={{ regdom }} -{% endif %} +{{ 'options cfg80211 ieee80211_regdom=' + regdom if regdom is defined }} diff --git a/data/templates/wifi/crda.tmpl b/data/templates/wifi/crda.tmpl index 750ad86ee..6cd125e37 100644 --- a/data/templates/wifi/crda.tmpl +++ b/data/templates/wifi/crda.tmpl @@ -1,3 +1 @@ -{%- if regdom -%} -REGDOMAIN={{ regdom }} -{% endif %} +{{ 'REGDOMAIN=' + regdom if regdom is defined }} diff --git a/data/templates/wifi/hostapd.conf.tmpl b/data/templates/wifi/hostapd.conf.tmpl index d6068e4db..765668c57 100644 --- a/data/templates/wifi/hostapd.conf.tmpl +++ b/data/templates/wifi/hostapd.conf.tmpl @@ -9,7 +9,7 @@ device_name={{ description | truncate(32, True) }} # management frames with the Host AP driver); wlan0 with many nl80211 drivers # Note: This attribute can be overridden by the values supplied with the '-i' # command line parameter. -interface={{ intf }} +interface={{ ifname }} # Driver interface type (hostap/wired/none/nl80211/bsd); # default: hostap). nl80211 is used with all Linux mac80211 drivers. @@ -28,8 +28,7 @@ logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=0 -{%- if country_code %} - +{% if country_code %} # Country code (ISO/IEC 3166-1). Used to set regulatory domain. # Set as needed to indicate country in which device is operating. # This can limit available channels and transmit power. @@ -42,14 +41,12 @@ country_code={{ country_code }} ieee80211d=1 {% endif %} -{%- if ssid %} - +{% if ssid %} # SSID to be used in IEEE 802.11 management frames ssid={{ ssid }} {% endif %} -{%- if channel %} - +{% if channel %} # Channel number (IEEE 802.11) # (default: 0, i.e., not set) # Please note that some drivers do not use this value from hostapd and the @@ -61,8 +58,7 @@ ssid={{ ssid }} channel={{ channel }} {% endif %} -{%- if mode %} - +{% if mode %} # Operation mode (a = IEEE 802.11a (5 GHz), b = IEEE 802.11b (2.4 GHz), # g = IEEE 802.11g (2.4 GHz), ad = IEEE 802.11ad (60 GHz); a/g options are used # with IEEE 802.11n (HT), too, to specify band). For IEEE 802.11ac (VHT), this @@ -71,29 +67,30 @@ channel={{ channel }} # special value "any" can be used to indicate that any support band can be used. # This special case is currently supported only with drivers with which # offloaded ACS is used. -{% if 'n' in mode -%} +{% if 'n' in mode %} hw_mode=g -{% elif 'ac' in mode -%} +{% elif 'ac' in mode %} hw_mode=a ieee80211h=1 ieee80211ac=1 -{% else -%} +{% else %} hw_mode={{ mode }} -{% endif %} +{% endif %} {% endif %} # ieee80211w: Whether management frame protection (MFP) is enabled # 0 = disabled (default) # 1 = optional # 2 = required -{% if 'disabled' in mgmt_frame_protection -%} +{% if 'disabled' in mgmt_frame_protection %} ieee80211w=0 -{% elif 'optional' in mgmt_frame_protection -%} +{% elif 'optional' in mgmt_frame_protection %} ieee80211w=1 -{% elif 'required' in mgmt_frame_protection -%} +{% elif 'required' in mgmt_frame_protection %} ieee80211w=2 {% endif %} +{% if capabilities is defined and capabilities.ht is defined %} # ht_capab: HT capabilities (list of flags) # LDPC coding capability: [LDPC] = supported # Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary @@ -127,79 +124,50 @@ ieee80211w=2 # DSSS/CCK Mode in 40 MHz: [DSSS_CCK-40] = allowed (not allowed if not set) # 40 MHz intolerant [40-INTOLERANT] (not advertised if not set) # L-SIG TXOP protection support: [LSIG-TXOP-PROT] (disabled if not set) -{% if cap_ht %} -ht_capab= -{%- endif -%} - -{%- if cap_ht_40mhz_incapable -%} -[40-INTOLERANT] -{%- endif -%} - -{%- if cap_ht_delayed_block_ack -%} -[DELAYED-BA] -{%- endif -%} - -{%- if cap_ht_dsss_cck_40 -%} -[DSSS_CCK-40] -{%- endif -%} - -{%- if cap_ht_greenfield -%} -[GF] -{%- endif -%} - -{%- if cap_ht_ldpc -%} -[LDPC] -{%- endif -%} - -{%- if cap_ht_lsig_protection -%} -[LSIG-TXOP-PROT] -{%- endif -%} - -{%- if cap_ht_max_amsdu -%} -[MAX-AMSDU-{{ cap_ht_max_amsdu }}] -{%- endif -%} - -{%- if cap_ht_smps -%} -[SMPS-{{ cap_ht_smps | upper }}] -{%- endif -%} - -{%- if cap_ht_chan_set_width -%} -{%- for csw in cap_ht_chan_set_width -%} -[{{ csw | upper }}] -{%- endfor -%} -{%- endif -%} - -{%- if cap_ht_short_gi -%} -{%- for gi in cap_ht_short_gi -%} -[SHORT-GI-{{ gi }}] -{%- endfor -%} -{%- endif -%} - -{%- if cap_ht_stbc_tx -%} -[TX-STBC] -{%- endif -%} -{%- if cap_ht_stbc_rx -%} -[RX-STBC{{ cap_ht_stbc_rx }}] -{%- endif %} +{% set output = '' %} +{% set output = output + '[40-INTOLERANT]' if capabilities.ht.fourtymhz_incapable is defined else '' %} +{% set output = output + '[DELAYED-BA]' if capabilities.ht.delayed_block_ack is defined else '' %} +{% set output = output + '[DSSS_CCK-40]' if capabilities.ht.dsss_cck_40 is defined else '' %} +{% set output = output + '[GF]' if capabilities.ht.greenfield is defined else '' %} +{% set output = output + '[LDPC]' if capabilities.ht.ldpc is defined else '' %} +{% set output = output + '[LSIG-TXOP-PROT]' if capabilities.ht.lsig_protection is defined else '' %} +{% set output = output + '[TX-STBC]' if capabilities.ht.stbc.tx is defined else '' %} +{% set output = output + '[RX-STBC-' + capabilities.ht.stbc.rx | upper + ']' if capabilities.ht.stbc.tx is defined else '' %} +{% set output = output + '[MAX-AMSDU-' + capabilities.ht.max_amsdu + ']' if capabilities.ht.max_amsdu is defined else '' %} +{% set output = output + '[SMPS-' + capabilities.ht.smps | upper + ']' if capabilities.ht.smps is defined else '' %} + +{% if capabilities.ht.channel_set_width is defined %} +{% for csw in capabilities.ht.channel_set_width %} +{% set output = output + '[' + csw | upper + ']' %} +{% endfor %} +{% endif %} -# Required for full HT and VHT functionality -wme_enabled=1 +{% if capabilities.ht.short_gi is defined %} +{% for short_gi in capabilities.ht.short_gi %} +{% set output = output + '[SHORT-GI-' + short_gi | upper + ']' %} +{% endfor %} +{% endif %} -{% if cap_ht_powersave -%} +ht_capab={{ output }} + +{% if capabilities.ht.auto_powersave is defined %} # WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD] # Enable this flag if U-APSD supported outside hostapd (eg., Firmware/driver) uapsd_advertisement_enabled=1 -{%- endif %} +{% endif %} + +{% endif %} + +# Required for full HT and VHT functionality +wme_enabled=1 -{% if cap_req_ht -%} + +{% if capabilities is defined and capabilities.require_ht is defined %} # Require stations to support HT PHY (reject association if they do not) require_ht=1 {% endif %} -{%- if cap_vht_chan_set_width -%} -vht_oper_chwidth={{ cap_vht_chan_set_width }} -{%- endif %} - +{% if capabilities is defined and capabilities.vht is defined %} # vht_capab: VHT capabilities (list of flags) # # vht_max_mpdu_len: [MAX-MPDU-7991] [MAX-MPDU-11454] @@ -316,133 +284,95 @@ vht_oper_chwidth={{ cap_vht_chan_set_width }} # Tx Antenna Pattern Consistency: [TX-ANTENNA-PATTERN] # Indicates the possibility of Tx antenna pattern change # 0 = Tx antenna pattern might change during the lifetime of an association -# 1 = Tx antenna pattern does not change during the lifetime of an association -{% if cap_vht %} -vht_capab= -{%- endif -%} - -{%- if cap_vht_max_mpdu -%} -[MAX-MPDU-{{ cap_vht_max_mpdu }}] -{%- endif -%} - -{%- if cap_vht_max_mpdu_exp -%} -[MAX-A-MPDU-LEN-EXP{{ cap_vht_max_mpdu_exp }}] -{%- endif -%} - -{%- if cap_vht_chan_set_width -%} -{%- if '2' in cap_vht_chan_set_width -%} -[VHT160] -{%- elif '3' in cap_vht_chan_set_width -%} -[VHT160-80PLUS80] -{%- endif -%} -{%- endif -%} - -{%- if cap_vht_stbc_tx -%} -[TX-STBC-2BY1] -{%- endif -%} - -{%- if cap_vht_stbc_rx -%} -[RX-STBC-{{ cap_vht_stbc_rx }}] -{%- endif -%} - -{%- if cap_vht_link_adaptation -%} -{%- if 'unsolicited' in cap_vht_link_adaptation -%} -[VHT-LINK-ADAPT2] -{%- elif 'both' in cap_vht_link_adaptation -%} -[VHT-LINK-ADAPT3] -{%- endif -%} -{%- endif -%} - -{%- if cap_vht_short_gi -%} -{%- for gi in cap_vht_short_gi -%} -[SHORT-GI-{{ gi }}] -{%- endfor -%} -{%- endif -%} - -{%- if cap_vht_ldpc -%} -[RXLDPC] -{%- endif -%} - -{%- if cap_vht_tx_powersave -%} -[VHT-TXOP-PS] -{%- endif -%} - -{%- if cap_vht_vht_cf -%} -[HTC-VHT] -{%- endif -%} - -{%- if cap_vht_beamform -%} -{%- for beamform in cap_vht_beamform -%} -{%- if 'single-user-beamformer' in beamform -%} -[SU-BEAMFORMER] -{%- elif 'single-user-beamformee' in beamform -%} -[SU-BEAMFORMEE] -{%- elif 'multi-user-beamformer' in beamform -%} -[MU-BEAMFORMER] -{%- elif 'multi-user-beamformee' in beamform -%} -[MU-BEAMFORMEE] -{%- endif -%} -{%- endfor -%} -{%- endif -%} - -{%- if cap_vht_antenna_fixed -%} -[RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN] -{%- endif -%} - -{%- if cap_vht_antenna_cnt -%} -{%- if cap_vht_antenna_cnt|int > 1 -%} -{%- if cap_vht_beamform -%} -{%- for beamform in cap_vht_beamform -%} -{%- if 'single-user-beamformer' in beamform -%} -{%- if cap_vht_antenna_cnt|int < 6 -%} -[BF-ANTENNA-{{ cap_vht_antenna_cnt|int -1 }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt|int -1}}] -{%- endif -%} -{%- else -%} -{%- if cap_vht_antenna_cnt|int < 5 -%} -[BF-ANTENNA-{{ cap_vht_antenna_cnt }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt }}] -{%- endif -%} -{%- endif -%} -{%- endfor -%} -{%- else -%} -{%- if cap_vht_antenna_cnt|int < 5 -%} -[BF-ANTENNA-{{ cap_vht_antenna_cnt }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt }}] -{%- endif -%} -{%- endif -%} -{%- endif -%} -{%- endif %} +# 1 = Tx antenna pattern does not change during the lifetime of an + +{% if capabilities.vht.center_channel_freq.freq_1 is defined %} +# center freq = 5 GHz + (5 * index) +# So index 42 gives center freq 5.210 GHz +# which is channel 42 in 5G band +vht_oper_centr_freq_seg0_idx={{ capabilities.vht.center_channel_freq.freq_1 }} +{% endif %} + +{% if capabilities.vht.center_channel_freq.freq_2 is defined %} +# center freq = 5 GHz + (5 * index) +# So index 159 gives center freq 5.795 GHz +# which is channel 159 in 5G band +vht_oper_centr_freq_seg1_idx={{ capabilities.vht.center_channel_freq.freq_2 }} +{% endif %} + +{% if capabilities.vht.channel_set_width is defined %} +vht_oper_chwidth={{ capabilities.vht.channel_set_width }} +{% endif %} + +{% set output = '' %} +{% set output = output + '[TX-STBC-2BY1]' if capabilities.vht.stbc.tx is defined else '' %} +{% set output = output + '[RXLDPC]' if capabilities.vht.ldpc is defined else '' %} +{% set output = output + '[VHT-TXOP-PS]' if capabilities.vht.tx_powersave is defined else '' %} +{% set output = output + '[HTC-VHT]' if capabilities.vht.vht_cf is defined else '' %} +{% set output = output + '[RX-ANTENNA-PATTERN]' if capabilities.vht.antenna_pattern_fixed is defined else '' %} +{% set output = output + '[TX-ANTENNA-PATTERN]' if capabilities.vht.antenna_pattern_fixed is defined else '' %} + +{% set output = output + '[RX-STBC-' + capabilities.vht.stbc.rx + ']' if capabilities.vht.stbc.rx is defined else '' %} +{% set output = output + '[MAX-MPDU-' + capabilities.vht.max_mpdu + ']' if capabilities.vht.max_mpdu is defined else '' %} +{% set output = output + '[MAX-A-MPDU-LEN-EXP-' + capabilities.vht.max_mpdu_exp + ']' if capabilities.vht.max_mpdu_exp is defined else '' %} +{% set output = output + '[MAX-A-MPDU-LEN-EXP-' + capabilities.vht.max_mpdu_exp + ']' if capabilities.vht.max_mpdu_exp is defined else '' %} + +{% set output = output + '[VHT160]' if capabilities.vht.max_mpdu_exp is defined and capabilities.vht.max_mpdu_exp == '2' else '' %} +{% set output = output + '[VHT160-80PLUS80]' if capabilities.vht.max_mpdu_exp is defined and capabilities.vht.max_mpdu_exp == '3' else '' %} +{% set output = output + '[VHT-LINK-ADAPT2]' if capabilities.vht.link_adaptation is defined and capabilities.vht.link_adaptation == 'unsolicited' else '' %} +{% set output = output + '[VHT-LINK-ADAPT3]' if capabilities.vht.link_adaptation is defined and capabilities.vht.link_adaptation == 'both' else '' %} + +{% if capabilities.vht.short_gi is defined %} +{% for short_gi in capabilities.vht.short_gi %} +{% set output = output + '[SHORT-GI-' + short_gi | upper + ']' %} +{% endfor %} +{% endif %} + +{% if capabilities.vht.beamform %} +{% for beamform in capabilities.vht.beamform %} +{% set output = output + '[SU-BEAMFORMER]' if beamform == 'single-user-beamformer' else '' %} +{% set output = output + '[SU-BEAMFORMEE]' if beamform == 'single-user-beamformee' else '' %} +{% set output = output + '[MU-BEAMFORMER]' if beamform == 'multi-user-beamformer' else '' %} +{% set output = output + '[MU-BEAMFORMEE]' if beamform == 'multi-user-beamformee' else '' %} +{% endfor %} +{% endif %} + +{% if capabilities.vht.antenna_count is defined and capabilities.vht.antenna_count|int > 1 %} +{% if capabilities.vht.beamform %} +{% if beamform == 'single-user-beamformer' %} +{% if capabilities.vht.antenna_count is defined and capabilities.vht.antenna_count|int > 1 and capabilities.vht.antenna_count|int < 6 %} +{% set output = output + '[BF-ANTENNA-' + capabilities.vht.antenna_count|int -1 + ']' %} +{% set output = output + '[SOUNDING-DIMENSION-' + capabilities.vht.antenna_count|int -1 + ']' %} +{% endif %} +{% endif %} +{% if capabilities.vht.antenna_count is defined and capabilities.vht.antenna_count|int > 1 and capabilities.vht.antenna_count|int < 5 %} +{% set output = output + '[BF-ANTENNA-' + capabilities.vht.antenna_count + ']' %} +{% set output = output + '[SOUNDING-DIMENSION-' + capabilities.vht.antenna_count+ ']' %} +{% endif %} +{% endif %} +{% endif %} + +vht_capab={{ output }} +{% endif %} # ieee80211n: Whether IEEE 802.11n (HT) is enabled # 0 = disabled (default) # 1 = enabled # Note: You will also need to enable WMM for full HT functionality. # Note: hw_mode=g (2.4 GHz) and hw_mode=a (5 GHz) is used to specify the band. -{% if cap_req_vht -%} +{% if capabilities is defined and capabilities.require_vht is defined %} ieee80211n=0 # Require stations to support VHT PHY (reject association if they do not) require_vht=1 -{% else -%} -{% if 'n' in mode or 'ac' in mode -%} +{% else %} +{% if 'n' in mode or 'ac' in mode %} ieee80211n=1 -{% else -%} +{% else %} ieee80211n=0 -{%- endif %} +{% endif %} {% endif %} -{% if cap_vht_center_freq_1 -%} -# center freq = 5 GHz + (5 * index) -# So index 42 gives center freq 5.210 GHz -# which is channel 42 in 5G band -vht_oper_centr_freq_seg0_idx={{ cap_vht_center_freq_1 }} -{% endif %} - -{% if cap_vht_center_freq_2 -%} -# center freq = 5 GHz + (5 * index) -# So index 159 gives center freq 5.795 GHz -# which is channel 159 in 5G band -vht_oper_centr_freq_seg1_idx={{ cap_vht_center_freq_2 }} -{% endif %} - -{% if disable_broadcast_ssid -%} +{% if disable_broadcast_ssid is defined %} # Send empty SSID in beacons and ignore probe request frames that do not # specify full SSID, i.e., require stations to know SSID. # default: disabled (0) @@ -463,7 +393,7 @@ ignore_broadcast_ssid=1 # 2 = use external RADIUS server (accept/deny lists are searched first) macaddr_acl=0 -{% if max_stations -%} +{% if max_stations is defined %} # Maximum number of stations allowed in station table. New stations will be # rejected after the station table is full. IEEE 802.11 has a limit of 2007 # different association IDs, so this number should not be larger than that. @@ -471,13 +401,13 @@ macaddr_acl=0 max_num_sta={{ max_stations }} {% endif %} -{% if isolate_stations -%} +{% if isolate_stations is defined %} # Client isolation can be used to prevent low-level bridging of frames between # associated stations in the BSS. By default, this bridging is allowed. ap_isolate=1 {% endif %} -{% if reduce_transmit_power -%} +{% if reduce_transmit_power is defined %} # Add Power Constraint element to Beacon and Probe Response frames # This config option adds Power Constraint element when applicable and Country # element is added. Power Constraint element is required by Transmit Power @@ -486,14 +416,15 @@ ap_isolate=1 local_pwr_constraint={{ reduce_transmit_power }} {% endif %} -{% if expunge_failing_stations -%} +{% if expunge_failing_stations is defined %} # Disassociate stations based on excessive transmission failures or other # indications of connection loss. This depends on the driver capabilities and # may not be available with all drivers. disassoc_low_ack=1 {% endif %} -{% if sec_wep -%} + +{% if security is defined and security.wep is defined %} # IEEE 802.11 specifies two authentication algorithms. hostapd can be # configured to allow both of these or only one. Open system authentication # should be used with IEEE 802.1X. @@ -522,13 +453,14 @@ wep_default_key=0 # digits, depending on whether 40-bit (64-bit), 104-bit (128-bit), or # 128-bit (152-bit) WEP is used. # Only the default key must be supplied; the others are optional. -{% if sec_wep_key -%} -{% for key in sec_wep_key -%} -wep_key{{ loop.index -1 }}={{ key}} -{% endfor %} -{%- endif %} +{% if security.wep.key is defined %} +{% for key in sec_wep_key %} +wep_key{{ loop.index -1 }}={{ security.wep.key }} +{% endfor %} +{% endif %} -{% elif sec_wpa -%} + +{% elif security is defined and security.wpa is defined %} ##### WPA/IEEE 802.11i configuration ########################################## # Enable WPA. Setting this variable configures the AP to require WPA (either @@ -542,15 +474,17 @@ wep_key{{ loop.index -1 }}={{ key}} # and/or WPA2 (full IEEE 802.11i/RSN): # bit0 = WPA # bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled) -{% if 'both' in sec_wpa_mode -%} +{% if security.wpa.mode is defined %} +{% if security.wpa.mode == 'both' %} wpa=3 -{%- elif 'wpa2' in sec_wpa_mode -%} +{% elif security.wpa.mode == 'wpa2' %} wpa=2 -{%- elif 'wpa' in sec_wpa_mode -%} +{% elif security.wpa.mode == 'wpa' %} wpa=1 -{%- endif %} +{% endif %} +{% endif %} -{% if sec_wpa_cipher -%} +{% if security.wpa.cipher is defined %} # Set of accepted cipher suites (encryption algorithms) for pairwise keys # (unicast packets). This is a space separated list of algorithms: # CCMP = AES in Counter mode with CBC-MAC (CCMP-128) @@ -563,26 +497,39 @@ wpa=1 # allowed as the pairwise cipher, group cipher will also be CCMP. Otherwise, # TKIP will be used as the group cipher. The optional group_cipher parameter can # be used to override this automatic selection. -{% if 'wpa2' in sec_wpa_mode -%} + +{% if security.wpa.mode is defined and security.wpa.mode == 'wpa2' %} # Pairwise cipher for RSN/WPA2 (default: use wpa_pairwise value) -rsn_pairwise={{ sec_wpa_cipher | join(" ") }} -{% else -%} +{% if security.wpa.cipher is string %} +rsn_pairwise={{ security.wpa.cipher }} +{% else %} +rsn_pairwise={{ security.wpa.cipher | join(" ") }} +{% endif %} +{% else %} # Pairwise cipher for WPA (v1) (default: TKIP) -wpa_pairwise={{ sec_wpa_cipher | join(" ") }} -{%- endif -%} -{% endif %} - -{% if sec_wpa_group_cipher -%} +{% if security.wpa.cipher is string %} +wpa_pairwise={{ security.wpa.cipher }} +{% else %} +wpa_pairwise={{ security.wpa.cipher | join(" ") }} +{% endif %} +{% endif %} +{% endif %} + +{% if security.wpa.group_cipher is defined %} # Optional override for automatic group cipher selection # This can be used to select a specific group cipher regardless of which # pairwise ciphers were enabled for WPA and RSN. It should be noted that # overriding the group cipher with an unexpected value can result in # interoperability issues and in general, this parameter is mainly used for # testing purposes. -group_cipher={{ sec_wpa_group_cipher | join(" ") }} -{% endif %} - -{% if sec_wpa_passphrase -%} +{% if security.wpa.group_cipher is string %} +group_cipher={{ security.wpa.group_cipher }} +{% else %} +group_cipher={{ security.wpa.group_cipher | join(" ") }} +{% endif %} +{% endif %} + +{% if security.wpa.passphrase is defined %} # IEEE 802.11 specifies two authentication algorithms. hostapd can be # configured to allow both of these or only one. Open system authentication # should be used with IEEE 802.1X. @@ -595,7 +542,7 @@ auth_algs=1 # secret in hex format (64 hex digits), wpa_psk, or as an ASCII passphrase # (8..63 characters) that will be converted to PSK. This conversion uses SSID # so the PSK changes when ASCII passphrase is used and the SSID is changed. -wpa_passphrase={{ sec_wpa_passphrase }} +wpa_passphrase={{ security.wpa.passphrase }} # Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The # entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be @@ -604,7 +551,7 @@ wpa_passphrase={{ sec_wpa_passphrase }} # WPA-PSK-SHA256 = WPA2-Personal using SHA256 wpa_key_mgmt=WPA-PSK -{% elif sec_wpa_radius -%} +{% elif security.wpa.radius is defined %} ##### IEEE 802.1X-2004 related configuration ################################## # Require IEEE 802.1X authorization ieee8021x=1 @@ -616,40 +563,37 @@ ieee8021x=1 # WPA-EAP-SHA256 = WPA2-Enterprise using SHA256 wpa_key_mgmt=WPA-EAP -{% if sec_wpa_radius_source -%} +{% if security.wpa.radius.server is defined %} # RADIUS client forced local IP address for the access point # Normally the local IP address is determined automatically based on configured # IP addresses, but this field can be used to force a specific address to be # used, e.g., when the device has multiple IP addresses. -radius_client_addr={{ sec_wpa_radius_source }} - -# The own IP address of the access point (used as NAS-IP-Address) -own_ip_addr={{ sec_wpa_radius_source }} -{% else %} # The own IP address of the access point (used as NAS-IP-Address) +{% if security.wpa.radius.source_address is defined %} +radius_client_addr={{ security.wpa.radius.source_address }} +own_ip_addr={{ security.wpa.radius.source_address }} +{% else %} own_ip_addr=127.0.0.1 -{% endif %} +{% endif %} -{% for radius in sec_wpa_radius -%} -{%- if not radius.disabled -%} +{% for radius in security.wpa.radius.server if not radius.disabled %} # RADIUS authentication server auth_server_addr={{ radius.server }} auth_server_port={{ radius.port }} auth_server_shared_secret={{ radius.key }} -{% if radius.acc_port -%} + +{% if radius.acc_port %} # RADIUS accounting server acct_server_addr={{ radius.server }} acct_server_port={{ radius.acc_port }} acct_server_shared_secret={{ radius.key }} -{% endif %} -{% endif %} -{% endfor %} - -{% endif %} - -{% else %} +{% endif %} +{% endfor %} +{% else %} # Open system auth_algs=1 +{% endif %} +{% endif %} {% endif %} # TX queue parameters (EDCF / bursting) diff --git a/data/templates/wifi/wpa_supplicant.conf.tmpl b/data/templates/wifi/wpa_supplicant.conf.tmpl index 2784883f1..9ddad35fd 100644 --- a/data/templates/wifi/wpa_supplicant.conf.tmpl +++ b/data/templates/wifi/wpa_supplicant.conf.tmpl @@ -1,8 +1,8 @@ # WPA supplicant config network={ ssid="{{ ssid }}" -{%- if sec_wpa_passphrase %} - psk="{{ sec_wpa_passphrase }}" +{% if security is defined and security.wpa is defined and security.wpa.passphrase is defined %} + psk="{{ security.wpa.passphrase }}" {% else %} key_mgmt=NONE {% endif %} |