summaryrefslogtreecommitdiff
path: root/mibs/NETWORK-SERVICES-MIB.txt
diff options
context:
space:
mode:
Diffstat (limited to 'mibs/NETWORK-SERVICES-MIB.txt')
-rw-r--r--mibs/NETWORK-SERVICES-MIB.txt626
1 files changed, 626 insertions, 0 deletions
diff --git a/mibs/NETWORK-SERVICES-MIB.txt b/mibs/NETWORK-SERVICES-MIB.txt
new file mode 100644
index 000000000..0f2cabecb
--- /dev/null
+++ b/mibs/NETWORK-SERVICES-MIB.txt
@@ -0,0 +1,626 @@
+NETWORK-SERVICES-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ OBJECT-TYPE, Counter32, Gauge32, MODULE-IDENTITY, mib-2
+ FROM SNMPv2-SMI
+ TimeStamp, TEXTUAL-CONVENTION
+ FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF
+ SnmpAdminString
+ FROM SNMP-FRAMEWORK-MIB;
+
+application MODULE-IDENTITY
+ LAST-UPDATED "200003030000Z"
+ ORGANIZATION "IETF Mail and Directory Management Working Group"
+
+ CONTACT-INFO
+ " Ned Freed
+
+ Postal: Innosoft International, Inc.
+ 1050 Lakes Drive
+ West Covina, CA 91790
+ US
+
+ Tel: +1 626 919 3600
+ Fax: +1 626 919 3614
+
+ E-Mail: ned.freed@innosoft.com"
+ DESCRIPTION
+ "The MIB module describing network service applications"
+ REVISION "200003030000Z"
+ DESCRIPTION
+ "This revision, published in RFC 2788, changes a number of
+ DisplayStrings to SnmpAdminStrings. Note that this change
+ is not strictly supported by SMIv2. However, the alternative
+ of deprecating the old objects and defining new objects
+ would have a more adverse impact on backward compatibility
+ and interoperability, given the particular semantics of
+ these objects. The defining reference for distinguished
+ names has also been updated from RFC 1779 to RFC 2253."
+ REVISION "199905120000Z"
+ DESCRIPTION
+ "This revision fixes a few small technical problems found
+ in previous versions, mostly in regards to the conformance
+ groups for different versions of this MIB. No changes have
+ been made to the objects this MIB defines since RFC 2248."
+ REVISION "199708170000Z"
+ DESCRIPTION
+ "This revision, published in RFC 2248, adds the
+ applDescription and applURL objects, adds the quiescing
+ state to the applOperStatus object and renames the MIB
+ from the APPLICATION-MIB to the NETWORK-SERVICE-MIB."
+ REVISION "199311280000Z"
+ DESCRIPTION
+ "The original version of this MIB was published in RFC 1565"
+ ::= {mib-2 27}
+
+-- Textual conventions
+
+-- DistinguishedName is used to refer to objects in the
+-- directory.
+
+DistinguishedName ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "A Distinguished Name represented in accordance with
+ RFC 2253, presented in the UTF-8 charset defined in
+ RFC 2279."
+ SYNTAX OCTET STRING (SIZE (0..255))
+
+-- Uniform Resource Locators are stored in URLStrings.
+
+URLString ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "255a"
+ STATUS current
+ DESCRIPTION
+ "A Uniform Resource Locator represented in accordance
+ with RFCs 1738 and 2368, presented in the NVT ASCII
+ charset defined in RFC 854."
+ SYNTAX OCTET STRING (SIZE (0..255))
+
+-- The basic applTable contains a list of the application
+-- entities.
+
+applTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ApplEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table holding objects which apply to all different
+ kinds of applications providing network services.
+ Each network service application capable of being
+ monitored should have a single entry in this table."
+ ::= {application 1}
+
+applEntry OBJECT-TYPE
+ SYNTAX ApplEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry associated with a single network service
+ application."
+ INDEX {applIndex}
+ ::= {applTable 1}
+
+ApplEntry ::= SEQUENCE {
+ applIndex
+ INTEGER,
+ applName
+ SnmpAdminString,
+ applDirectoryName
+
+ DistinguishedName,
+ applVersion
+ SnmpAdminString,
+ applUptime
+ TimeStamp,
+ applOperStatus
+ INTEGER,
+ applLastChange
+ TimeStamp,
+ applInboundAssociations
+ Gauge32,
+ applOutboundAssociations
+ Gauge32,
+ applAccumulatedInboundAssociations
+ Counter32,
+ applAccumulatedOutboundAssociations
+ Counter32,
+ applLastInboundActivity
+ TimeStamp,
+ applLastOutboundActivity
+ TimeStamp,
+ applRejectedInboundAssociations
+ Counter32,
+ applFailedOutboundAssociations
+ Counter32,
+ applDescription
+ SnmpAdminString,
+ applURL
+ URLString
+}
+
+applIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index to uniquely identify the network service
+ application. This attribute is the index used for
+ lexicographic ordering of the table."
+ ::= {applEntry 1}
+
+applName OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name the network service application chooses to be
+ known by."
+ ::= {applEntry 2}
+
+applDirectoryName OBJECT-TYPE
+ SYNTAX DistinguishedName
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The Distinguished Name of the directory entry where
+ static information about this application is stored.
+ An empty string indicates that no information about
+ the application is available in the directory."
+ ::= {applEntry 3}
+
+applVersion OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The version of network service application software.
+ This field is usually defined by the vendor of the
+ network service application software."
+ ::= {applEntry 4}
+applUptime OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the time the network service
+ application was last initialized. If the application was
+ last initialized prior to the last initialization of the
+ network management subsystem, then this object contains
+ a zero value."
+ ::= {applEntry 5}
+
+applOperStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ up(1),
+ down(2),
+ halted(3),
+ congested(4),
+ restarting(5),
+ quiescing(6)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Indicates the operational status of the network service
+ application. 'down' indicates that the network service is
+
+ not available. 'up' indicates that the network service
+ is operational and available. 'halted' indicates that the
+ service is operational but not available. 'congested'
+ indicates that the service is operational but no additional
+ inbound associations can be accommodated. 'restarting'
+ indicates that the service is currently unavailable but is
+ in the process of restarting and will be available soon.
+ 'quiescing' indicates that service is currently operational
+ but is in the process of shutting down. Additional inbound
+ associations may be rejected by applications in the
+ 'quiescing' state."
+ ::= {applEntry 6}
+
+applLastChange OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the time the network service
+ application entered its current operational state. If
+ the current state was entered prior to the last
+ initialization of the local network management subsystem,
+ then this object contains a zero value."
+ ::= {applEntry 7}
+
+applInboundAssociations OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of current associations to the network service
+ application, where it is the responder. An inbound
+ association occurs when another application successfully
+ connects to this one."
+ ::= {applEntry 8}
+
+applOutboundAssociations OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of current associations to the network service
+ application, where it is the initiator. An outbound
+ association occurs when this application successfully
+ connects to another one."
+ ::= {applEntry 9}
+
+applAccumulatedInboundAssociations OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of associations to the application entity
+ since application initialization, where it was the responder."
+ ::= {applEntry 10}
+
+applAccumulatedOutboundAssociations OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of associations to the application entity
+ since application initialization, where it was the initiator."
+ ::= {applEntry 11}
+
+applLastInboundActivity OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the time this application last
+ had an inbound association. If the last association
+ occurred prior to the last initialization of the network
+ subsystem, then this object contains a zero value."
+ ::= {applEntry 12}
+
+applLastOutboundActivity OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the time this application last
+ had an outbound association. If the last association
+ occurred prior to the last initialization of the network
+ subsystem, then this object contains a zero value."
+ ::= {applEntry 13}
+
+applRejectedInboundAssociations OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of inbound associations the application
+ entity has rejected, since application initialization.
+ Rejected associations are not counted in the accumulated
+ association totals. Note that this only counts
+
+ associations the application entity has rejected itself;
+ it does not count rejections that occur at lower layers
+ of the network. Thus, this counter may not reflect the
+ true number of failed inbound associations."
+ ::= {applEntry 14}
+
+applFailedOutboundAssociations OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number associations where the application entity
+ is initiator and association establishment has failed,
+ since application initialization. Failed associations are
+ not counted in the accumulated association totals."
+ ::= {applEntry 15}
+
+applDescription OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A text description of the application. This information
+ is intended to identify and briefly describe the
+ application in a status display."
+ ::= {applEntry 16}
+
+applURL OBJECT-TYPE
+ SYNTAX URLString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A URL pointing to a description of the application.
+ This information is intended to identify and describe
+ the application in a status display."
+ ::= {applEntry 17}
+
+-- The assocTable augments the information in the applTable
+-- with information about associations. Note that two levels
+-- of compliance are specified below, depending on whether
+-- association monitoring is mandated.
+
+assocTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AssocEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The table holding a set of all active application
+
+ associations."
+ ::= {application 2}
+
+assocEntry OBJECT-TYPE
+ SYNTAX AssocEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry associated with an association for a network
+ service application."
+ INDEX {applIndex, assocIndex}
+ ::= {assocTable 1}
+
+AssocEntry ::= SEQUENCE {
+ assocIndex
+ INTEGER,
+ assocRemoteApplication
+ SnmpAdminString,
+ assocApplicationProtocol
+ OBJECT IDENTIFIER,
+ assocApplicationType
+ INTEGER,
+ assocDuration
+ TimeStamp
+}
+
+assocIndex OBJECT-TYPE
+ SYNTAX INTEGER (1..2147483647)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An index to uniquely identify each association for a network
+ service application. This attribute is the index that is
+ used for lexicographic ordering of the table. Note that the
+ table is also indexed by the applIndex."
+ ::= {assocEntry 1}
+
+assocRemoteApplication OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The name of the system running remote network service
+ application. For an IP-based application this should be
+ either a domain name or IP address. For an OSI application
+ it should be the string encoded distinguished name of the
+ managed object. For X.400(1984) MTAs which do not have a
+ Distinguished Name, the RFC 2156 syntax 'mta in
+
+ globalid' used in X400-Received: fields can be used. Note,
+ however, that not all connections an MTA makes are
+ necessarily to another MTA."
+ ::= {assocEntry 2}
+
+assocApplicationProtocol OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An identification of the protocol being used for the
+ application. For an OSI Application, this will be the
+ Application Context. For Internet applications, OID
+ values of the form {applTCPProtoID port} or {applUDPProtoID
+ port} are used for TCP-based and UDP-based protocols,
+ respectively. In either case 'port' corresponds to the
+ primary port number being used by the protocol. The
+ usual IANA procedures may be used to register ports for
+ new protocols."
+ ::= {assocEntry 3}
+
+assocApplicationType OBJECT-TYPE
+ SYNTAX INTEGER {
+ uainitiator(1),
+ uaresponder(2),
+ peerinitiator(3),
+ peerresponder(4)}
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This indicates whether the remote application is some type of
+ client making use of this network service (e.g., a Mail User
+ Agent) or a server acting as a peer. Also indicated is whether
+ the remote end initiated an incoming connection to the network
+ service or responded to an outgoing connection made by the
+ local application. MTAs and messaging gateways are
+ considered to be peers for the purposes of this variable."
+ ::= {assocEntry 4}
+
+assocDuration OBJECT-TYPE
+ SYNTAX TimeStamp
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the time this association was
+ started. If this association started prior to the last
+ initialization of the network subsystem, then this
+ object contains a zero value."
+ ::= {assocEntry 5}
+
+-- Conformance information
+
+applConformance OBJECT IDENTIFIER ::= {application 3}
+
+applGroups OBJECT IDENTIFIER ::= {applConformance 1}
+applCompliances OBJECT IDENTIFIER ::= {applConformance 2}
+
+-- Compliance statements
+
+applCompliance MODULE-COMPLIANCE
+ STATUS obsolete
+ DESCRIPTION
+ "The compliance statement for RFC 1565 implementations
+ which support the Network Services Monitoring MIB
+ for basic monitoring of network service applications.
+ This is the basic compliance statement for RFC 1565."
+ MODULE
+ MANDATORY-GROUPS {applRFC1565Group}
+ ::= {applCompliances 1}
+
+assocCompliance MODULE-COMPLIANCE
+ STATUS obsolete
+ DESCRIPTION
+ "The compliance statement for RFC 1565 implementations
+ which support the Network Services Monitoring MIB
+ for basic monitoring of network service applications
+ and their associations."
+ MODULE
+ MANDATORY-GROUPS {applRFC1565Group, assocRFC1565Group}
+ ::= {applCompliances 2}
+
+applRFC2248Compliance MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for RFC 2248 implementations
+ which support the Network Services Monitoring MIB
+ for basic monitoring of network service applications."
+ MODULE
+ MANDATORY-GROUPS {applRFC2248Group}
+ ::= {applCompliances 3}
+
+assocRFC2248Compliance MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for RFC 2248 implementations
+
+ which support the Network Services Monitoring MIB for
+ basic monitoring of network service applications and
+ their associations."
+ MODULE
+ MANDATORY-GROUPS {applRFC2248Group, assocRFC2248Group}
+ ::= {applCompliances 4}
+
+applRFC2788Compliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for RFC 2788 implementations
+ which support the Network Services Monitoring MIB
+ for basic monitoring of network service applications."
+ MODULE
+ MANDATORY-GROUPS {applRFC2788Group}
+ ::= {applCompliances 5}
+
+assocRFC2788Compliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for RFC 2788 implementations
+ which support the Network Services Monitoring MIB for
+ basic monitoring of network service applications and
+ their associations."
+ MODULE
+ MANDATORY-GROUPS {applRFC2788Group, assocRFC2788Group}
+ ::= {applCompliances 6}
+
+-- Units of conformance
+
+applRFC1565Group OBJECT-GROUP
+ OBJECTS {
+ applName, applVersion, applUptime, applOperStatus,
+ applLastChange, applInboundAssociations,
+ applOutboundAssociations, applAccumulatedInboundAssociations,
+ applAccumulatedOutboundAssociations, applLastInboundActivity,
+ applLastOutboundActivity, applRejectedInboundAssociations,
+ applFailedOutboundAssociations}
+ STATUS obsolete
+ DESCRIPTION
+ "A collection of objects providing basic monitoring of
+ network service applications. This is the original set
+ of such objects defined in RFC 1565."
+ ::= {applGroups 7}
+
+assocRFC1565Group OBJECT-GROUP
+ OBJECTS {
+
+ assocRemoteApplication, assocApplicationProtocol,
+ assocApplicationType, assocDuration}
+ STATUS obsolete
+ DESCRIPTION
+ "A collection of objects providing basic monitoring of
+ network service applications' associations. This is the
+ original set of such objects defined in RFC 1565."
+ ::= {applGroups 2}
+
+applRFC2248Group OBJECT-GROUP
+ OBJECTS {
+ applName, applVersion, applUptime, applOperStatus,
+ applLastChange, applInboundAssociations,
+ applOutboundAssociations, applAccumulatedInboundAssociations,
+ applAccumulatedOutboundAssociations, applLastInboundActivity,
+ applLastOutboundActivity, applRejectedInboundAssociations,
+ applFailedOutboundAssociations, applDescription, applURL}
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing basic monitoring of
+ network service applications. This group was originally
+ defined in RFC 2248; note that applDirectoryName is
+ missing."
+ ::= {applGroups 3}
+
+assocRFC2248Group OBJECT-GROUP
+ OBJECTS {
+ assocRemoteApplication, assocApplicationProtocol,
+ assocApplicationType, assocDuration}
+ STATUS deprecated
+ DESCRIPTION
+ "A collection of objects providing basic monitoring of
+ network service applications' associations. This group
+ was originally defined by RFC 2248."
+ ::= {applGroups 4}
+
+applRFC2788Group OBJECT-GROUP
+ OBJECTS {
+ applName, applDirectoryName, applVersion, applUptime,
+ applOperStatus, applLastChange, applInboundAssociations,
+ applOutboundAssociations, applAccumulatedInboundAssociations,
+ applAccumulatedOutboundAssociations, applLastInboundActivity,
+ applLastOutboundActivity, applRejectedInboundAssociations,
+ applFailedOutboundAssociations, applDescription, applURL}
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing basic monitoring of
+ network service applications. This is the appropriate
+
+ group for RFC 2788 -- it adds the applDirectoryName object
+ missing in RFC 2248."
+ ::= {applGroups 5}
+
+assocRFC2788Group OBJECT-GROUP
+ OBJECTS {
+ assocRemoteApplication, assocApplicationProtocol,
+ assocApplicationType, assocDuration}
+ STATUS current
+ DESCRIPTION
+ "A collection of objects providing basic monitoring of
+ network service applications' associations. This is
+ the appropriate group for RFC 2788."
+ ::= {applGroups 6}
+
+-- OIDs of the form {applTCPProtoID port} are intended to be used
+-- for TCP-based protocols that don't have OIDs assigned by other
+-- means. {applUDPProtoID port} serves the same purpose for
+-- UDP-based protocols. In either case 'port' corresponds to
+-- the primary port number being used by the protocol. For example,
+-- assuming no other OID is assigned for SMTP, an OID of
+-- {applTCPProtoID 25} could be used, since SMTP is a TCP-based
+-- protocol that uses port 25 as its primary port.
+
+applTCPProtoID OBJECT IDENTIFIER ::= {application 4}
+applUDPProtoID OBJECT IDENTIFIER ::= {application 5}
+
+END