diff options
Diffstat (limited to 'mibs/OSPF-TRAP-MIB.txt')
| -rw-r--r-- | mibs/OSPF-TRAP-MIB.txt | 443 |
1 files changed, 443 insertions, 0 deletions
diff --git a/mibs/OSPF-TRAP-MIB.txt b/mibs/OSPF-TRAP-MIB.txt new file mode 100644 index 000000000..8a3ab990c --- /dev/null +++ b/mibs/OSPF-TRAP-MIB.txt @@ -0,0 +1,443 @@ +OSPF-TRAP-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress + FROM SNMPv2-SMI + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState, + ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState, + ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId, + ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState, + ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbAreaId, + ospfExtLsdbLimit, ospf + FROM OSPF-MIB; + + ospfTrap MODULE-IDENTITY + LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995 + ORGANIZATION "IETF OSPF Working Group" + CONTACT-INFO + " Fred Baker + Postal: Cisco Systems + 519 Lado Drive + Santa Barbara, California 93111 + Tel: +1 805 681 0115 + E-Mail: fred@cisco.com + + Rob Coltun + Postal: RainbowBridge Communications + Tel: (301) 340-9416 + E-Mail: rcoltun@rainbow-bridge.com" + DESCRIPTION + "The MIB module to describe traps for the OSPF + Version 2 Protocol." + ::= { ospf 16 } + +-- Trap Support Objects + +-- The following are support objects for the OSPF traps. + +ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 } +ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 } + + ospfSetTrap OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(4)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A four-octet string serving as a bit map for + the trap events defined by the OSPF traps. This + object is used to enable and disable specific + OSPF traps where a 1 in the bit field + represents enabled. The right-most bit (least + significant) represents trap 0." + ::= { ospfTrapControl 1 } + + + ospfConfigErrorType OBJECT-TYPE + SYNTAX INTEGER { + badVersion (1), + areaMismatch (2), + unknownNbmaNbr (3), -- Router is Dr eligible + unknownVirtualNbr (4), + authTypeMismatch(5), + authFailure (6), + netMaskMismatch (7), + helloIntervalMismatch (8), + deadIntervalMismatch (9), + optionMismatch (10) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Potential types of configuration conflicts. + Used by the ospfConfigError and ospfConfigVir- + tError traps." + ::= { ospfTrapControl 2 } + + + ospfPacketType OBJECT-TYPE + SYNTAX INTEGER { + hello (1), + dbDescript (2), + lsReq (3), + lsUpdate (4), + lsAck (5) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "OSPF packet types." + ::= { ospfTrapControl 3 } + + + ospfPacketSrc OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address of an inbound packet that can- + not be identified by a neighbor instance." + ::= { ospfTrapControl 4 } + + +-- Traps + + + ospfIfStateChange NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfIfIpAddress, + ospfAddressLessIf, + ospfIfState -- The new state + } + STATUS current + DESCRIPTION + "An ospfIfStateChange trap signifies that there + has been a change in the state of a non-virtual + OSPF interface. This trap should be generated + when the interface state regresses (e.g., goes + from Dr to Down) or progresses to a terminal + state (i.e., Point-to-Point, DR Other, Dr, or + Backup)." + ::= { ospfTraps 16 } + + + ospfVirtIfStateChange NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfVirtIfAreaId, + ospfVirtIfNeighbor, + ospfVirtIfState -- The new state + } + STATUS current + DESCRIPTION + "An ospfIfStateChange trap signifies that there + has been a change in the state of an OSPF vir- + tual interface. + This trap should be generated when the inter- + face state regresses (e.g., goes from Point- + to-Point to Down) or progresses to a terminal + state (i.e., Point-to-Point)." + ::= { ospfTraps 1 } + + + ospfNbrStateChange NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfNbrIpAddr, + ospfNbrAddressLessIndex, + ospfNbrRtrId, + ospfNbrState -- The new state + } + STATUS current + DESCRIPTION + "An ospfNbrStateChange trap signifies that + there has been a change in the state of a non- + virtual OSPF neighbor. This trap should be + generated when the neighbor state regresses + (e.g., goes from Attempt or Full to 1-Way or + Down) or progresses to a terminal state (e.g., + 2-Way or Full). When an neighbor transitions + from or to Full on non-broadcast multi-access + and broadcast networks, the trap should be gen- + erated by the designated router. A designated + router transitioning to Down will be noted by + ospfIfStateChange." + ::= { ospfTraps 2 } + + + ospfVirtNbrStateChange NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfVirtNbrArea, + ospfVirtNbrRtrId, + ospfVirtNbrState -- The new state + } + STATUS current + DESCRIPTION + "An ospfIfStateChange trap signifies that there + has been a change in the state of an OSPF vir- + tual neighbor. This trap should be generated + when the neighbor state regresses (e.g., goes + from Attempt or Full to 1-Way or Down) or + progresses to a terminal state (e.g., Full)." + ::= { ospfTraps 3 } + ospfIfConfigError NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfIfIpAddress, + ospfAddressLessIf, + ospfPacketSrc, -- The source IP address + ospfConfigErrorType, -- Type of error + ospfPacketType + } + STATUS current + DESCRIPTION + "An ospfIfConfigError trap signifies that a + packet has been received on a non-virtual in- + terface from a router whose configuration + parameters conflict with this router's confi- + guration parameters. Note that the event op- + tionMismatch should cause a trap only if it + prevents an adjacency from forming." + ::= { ospfTraps 4 } + + + ospfVirtIfConfigError NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfVirtIfAreaId, + ospfVirtIfNeighbor, + ospfConfigErrorType, -- Type of error + ospfPacketType + } + STATUS current + DESCRIPTION + "An ospfConfigError trap signifies that a pack- + et has been received on a virtual interface + from a router whose configuration parameters + conflict with this router's configuration + parameters. Note that the event optionMismatch + should cause a trap only if it prevents an ad- + jacency from forming." + ::= { ospfTraps 5 } + + + ospfIfAuthFailure NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfIfIpAddress, + ospfAddressLessIf, + ospfPacketSrc, -- The source IP address + ospfConfigErrorType, -- authTypeMismatch or + -- authFailure + ospfPacketType + } + STATUS current + DESCRIPTION + "An ospfIfAuthFailure trap signifies that a + packet has been received on a non-virtual in- + terface from a router whose authentication key + or authentication type conflicts with this + router's authentication key or authentication + type." + ::= { ospfTraps 6 } + + + ospfVirtIfAuthFailure NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfVirtIfAreaId, + ospfVirtIfNeighbor, + ospfConfigErrorType, -- authTypeMismatch or + -- authFailure + ospfPacketType + } + STATUS current + DESCRIPTION + "An ospfVirtIfAuthFailure trap signifies that a + packet has been received on a virtual interface + from a router whose authentication key or au- + thentication type conflicts with this router's + authentication key or authentication type." + ::= { ospfTraps 7 } + + + ospfIfRxBadPacket NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfIfIpAddress, + ospfAddressLessIf, + ospfPacketSrc, -- The source IP address + ospfPacketType + } + STATUS current + DESCRIPTION + "An ospfIfRxBadPacket trap signifies that an + OSPF packet has been received on a non-virtual + interface that cannot be parsed." + ::= { ospfTraps 8 } + + ospfVirtIfRxBadPacket NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfVirtIfAreaId, + ospfVirtIfNeighbor, + ospfPacketType + } + STATUS current + DESCRIPTION + "An ospfRxBadPacket trap signifies that an OSPF + packet has been received on a virtual interface + that cannot be parsed." + ::= { ospfTraps 9 } + + + ospfTxRetransmit NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfIfIpAddress, + ospfAddressLessIf, + ospfNbrRtrId, -- Destination + ospfPacketType, + ospfLsdbType, + ospfLsdbLsid, + ospfLsdbRouterId + } + STATUS current + DESCRIPTION + "An ospfTxRetransmit trap signifies than an + OSPF packet has been retransmitted on a non- + virtual interface. All packets that may be re- + transmitted are associated with an LSDB entry. + The LS type, LS ID, and Router ID are used to + identify the LSDB entry." + ::= { ospfTraps 10 } + + + ospfVirtIfTxRetransmit NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfVirtIfAreaId, + ospfVirtIfNeighbor, + ospfPacketType, + ospfLsdbType, + ospfLsdbLsid, + ospfLsdbRouterId + } + STATUS current + DESCRIPTION + "An ospfTxRetransmit trap signifies than an + OSPF packet has been retransmitted on a virtual + interface. All packets that may be retransmit- + ted are associated with an LSDB entry. The LS + type, LS ID, and Router ID are used to identify + the LSDB entry." + ::= { ospfTraps 11 } + + + ospfOriginateLsa NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfLsdbAreaId, -- 0.0.0.0 for AS Externals + ospfLsdbType, + ospfLsdbLsid, + ospfLsdbRouterId + } + STATUS current + DESCRIPTION + "An ospfOriginateLsa trap signifies that a new + LSA has been originated by this router. This + trap should not be invoked for simple refreshes + of LSAs (which happesn every 30 minutes), but + instead will only be invoked when an LSA is + (re)originated due to a topology change. Addi- + tionally, this trap does not include LSAs that + are being flushed because they have reached + MaxAge." + ::= { ospfTraps 12 } + + + ospfMaxAgeLsa NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfLsdbAreaId, -- 0.0.0.0 for AS Externals + ospfLsdbType, + ospfLsdbLsid, + ospfLsdbRouterId + } + STATUS current + DESCRIPTION + "An ospfMaxAgeLsa trap signifies that one of + the LSA in the router's link-state database has + aged to MaxAge." + ::= { ospfTraps 13 } + + + ospfLsdbOverflow NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfExtLsdbLimit + } + STATUS current + DESCRIPTION + "An ospfLsdbOverflow trap signifies that the + number of LSAs in the router's link-state data- + base has exceeded ospfExtLsdbLimit." + ::= { ospfTraps 14 } + + + ospfLsdbApproachingOverflow NOTIFICATION-TYPE + OBJECTS { + ospfRouterId, -- The originator of the trap + ospfExtLsdbLimit + } + STATUS current + DESCRIPTION + "An ospfLsdbApproachingOverflow trap signifies + that the number of LSAs in the router's link- + state database has exceeded ninety percent of + ospfExtLsdbLimit." + ::= { ospfTraps 15 } + + +-- conformance information + +ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 } + +ospfTrapGroups OBJECT IDENTIFIER ::= { ospfTrapConformance 1 } +ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 } + +-- compliance statements + + ospfTrapCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement " + MODULE -- this module + MANDATORY-GROUPS { ospfTrapControlGroup } + + + GROUP ospfTrapControlGroup + DESCRIPTION + "This group is optional but recommended for all + OSPF systems" + ::= { ospfTrapCompliances 1 } + + +-- units of conformance + + ospfTrapControlGroup OBJECT-GROUP + OBJECTS { + ospfSetTrap, + ospfConfigErrorType, + ospfPacketType, + ospfPacketSrc + } + STATUS current + DESCRIPTION + "These objects are required to control traps + from OSPF systems." + ::= { ospfTrapGroups 1 } + + +END |