summaryrefslogtreecommitdiff
path: root/mibs/RIPv2-MIB.txt
diff options
context:
space:
mode:
Diffstat (limited to 'mibs/RIPv2-MIB.txt')
-rw-r--r--mibs/RIPv2-MIB.txt530
1 files changed, 530 insertions, 0 deletions
diff --git a/mibs/RIPv2-MIB.txt b/mibs/RIPv2-MIB.txt
new file mode 100644
index 000000000..6c92fb5f0
--- /dev/null
+++ b/mibs/RIPv2-MIB.txt
@@ -0,0 +1,530 @@
+ RIPv2-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, Counter32,
+ TimeTicks, IpAddress FROM SNMPv2-SMI
+ TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC
+ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
+ mib-2 FROM RFC1213-MIB;
+
+ -- This MIB module uses the extended OBJECT-TYPE macro as
+ -- defined in [9].
+
+ rip2 MODULE-IDENTITY
+ LAST-UPDATED "9407272253Z" -- Wed Jul 27 22:53:04 PDT 1994
+ ORGANIZATION "IETF RIP-II Working Group"
+ CONTACT-INFO
+ " Fred Baker
+ Postal: Cisco Systems
+ 519 Lado Drive
+ Santa Barbara, California 93111
+ Tel: +1 805 681 0115
+ E-Mail: fbaker@cisco.com
+
+ Postal: Gary Malkin
+ Xylogics, Inc.
+ 53 Third Avenue
+ Burlington, MA 01803
+
+ Phone: (617) 272-8140
+ EMail: gmalkin@Xylogics.COM"
+ DESCRIPTION
+ "The MIB module to describe the RIP2 Version 2 Protocol"
+ ::= { mib-2 23 }
+
+ -- RIP-2 Management Information Base
+
+ -- the RouteTag type represents the contents of the
+ -- Route Domain field in the packet header or route entry.
+ -- The use of the Route Domain is deprecated.
+
+ RouteTag ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "the RouteTag type represents the contents of the Route Domain
+ field in the packet header or route entry"
+ SYNTAX OCTET STRING (SIZE (2))
+
+--4.1 Global Counters
+
+-- The RIP-2 Globals Group.
+-- Implementation of this group is mandatory for systems
+-- which implement RIP-2.
+
+-- These counters are intended to facilitate debugging quickly
+-- changing routes or failing neighbors
+
+rip2Globals OBJECT IDENTIFIER ::= { rip2 1 }
+
+ rip2GlobalRouteChanges OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of route changes made to the IP Route
+ Database by RIP. This does not include the refresh
+ of a route's age."
+ ::= { rip2Globals 1 }
+
+ rip2GlobalQueries OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of responses sent to RIP queries
+ from other systems."
+ ::= { rip2Globals 2 }
+
+--4.2 RIP Interface Tables
+
+-- RIP Interfaces Groups
+-- Implementation of these Groups is mandatory for systems
+-- which implement RIP-2.
+
+-- The RIP Interface Status Table.
+
+ rip2IfStatTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rip2IfStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of subnets which require separate
+ status monitoring in RIP."
+ ::= { rip2 2 }
+
+ rip2IfStatEntry OBJECT-TYPE
+ SYNTAX Rip2IfStatEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A Single Routing Domain in a single Subnet."
+ INDEX { rip2IfStatAddress }
+ ::= { rip2IfStatTable 1 }
+
+ Rip2IfStatEntry ::=
+ SEQUENCE {
+ rip2IfStatAddress
+ IpAddress,
+ rip2IfStatRcvBadPackets
+ Counter32,
+ rip2IfStatRcvBadRoutes
+ Counter32,
+ rip2IfStatSentUpdates
+ Counter32,
+ rip2IfStatStatus
+ RowStatus
+ }
+
+ rip2IfStatAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP Address of this system on the indicated
+ subnet. For unnumbered interfaces, the value 0.0.0.N,
+ where the least significant 24 bits (N) is the ifIndex
+ for the IP Interface in network byte order."
+ ::= { rip2IfStatEntry 1 }
+
+ rip2IfStatRcvBadPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of RIP response packets received by
+ the RIP process which were subsequently discarded
+ for any reason (e.g. a version 0 packet, or an
+ unknown command type)."
+ ::= { rip2IfStatEntry 2 }
+
+ rip2IfStatRcvBadRoutes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of routes, in valid RIP packets,
+ which were ignored for any reason (e.g. unknown
+ address family, or invalid metric)."
+ ::= { rip2IfStatEntry 3 }
+
+ rip2IfStatSentUpdates OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of triggered RIP updates actually
+ sent on this interface. This explicitly does
+ NOT include full updates sent containing new
+ information."
+ ::= { rip2IfStatEntry 4 }
+
+ rip2IfStatStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Writing invalid has the effect of deleting
+ this interface."
+ ::= { rip2IfStatEntry 5 }
+
+-- The RIP Interface Configuration Table.
+
+ rip2IfConfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rip2IfConfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of subnets which require separate
+ configuration in RIP."
+ ::= { rip2 3 }
+
+ rip2IfConfEntry OBJECT-TYPE
+ SYNTAX Rip2IfConfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A Single Routing Domain in a single Subnet."
+ INDEX { rip2IfConfAddress }
+ ::= { rip2IfConfTable 1 }
+
+ Rip2IfConfEntry ::=
+ SEQUENCE {
+ rip2IfConfAddress
+ IpAddress,
+ rip2IfConfDomain
+ RouteTag,
+ rip2IfConfAuthType
+ INTEGER,
+ rip2IfConfAuthKey
+ OCTET STRING (SIZE(0..16)),
+ rip2IfConfSend
+ INTEGER,
+ rip2IfConfReceive
+ INTEGER,
+ rip2IfConfDefaultMetric
+ INTEGER,
+ rip2IfConfStatus
+ RowStatus,
+ rip2IfConfSrcAddress
+ IpAddress
+ }
+
+ rip2IfConfAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP Address of this system on the indicated
+ subnet. For unnumbered interfaces, the value 0.0.0.N,
+ where the least significant 24 bits (N) is the ifIndex
+ for the IP Interface in network byte order."
+ ::= { rip2IfConfEntry 1 }
+
+ rip2IfConfDomain OBJECT-TYPE
+ SYNTAX RouteTag
+ MAX-ACCESS read-create
+ STATUS obsolete
+ DESCRIPTION
+ "Value inserted into the Routing Domain field
+ of all RIP packets sent on this interface."
+ DEFVAL { '0000'h }
+ ::= { rip2IfConfEntry 2 }
+
+ rip2IfConfAuthType OBJECT-TYPE
+ SYNTAX INTEGER {
+ noAuthentication (1),
+ simplePassword (2),
+ md5 (3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of Authentication used on this
+ interface."
+ DEFVAL { noAuthentication }
+ ::= { rip2IfConfEntry 3 }
+
+ rip2IfConfAuthKey OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(0..16))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value to be used as the Authentication Key
+ whenever the corresponding instance of
+ rip2IfConfAuthType has a value other than
+ noAuthentication. A modification of the corresponding
+ instance of rip2IfConfAuthType does not modify
+ the rip2IfConfAuthKey value. If a string shorter
+ than 16 octets is supplied, it will be left-
+ justified and padded to 16 octets, on the right,
+ with nulls (0x00).
+
+ Reading this object always results in an OCTET
+ STRING of length zero; authentication may not
+ be bypassed by reading the MIB object."
+ DEFVAL { ''h }
+ ::= { rip2IfConfEntry 4 }
+
+ rip2IfConfSend OBJECT-TYPE
+ SYNTAX INTEGER {
+ doNotSend (1),
+ ripVersion1 (2),
+ rip1Compatible (3),
+ ripVersion2 (4),
+ ripV1Demand (5),
+ ripV2Demand (6)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "What the router sends on this interface.
+ ripVersion1 implies sending RIP updates compliant
+ with RFC 1058. rip1Compatible implies
+ broadcasting RIP-2 updates using RFC 1058 route
+ subsumption rules. ripVersion2 implies
+ multicasting RIP-2 updates. ripV1Demand indicates
+ the use of Demand RIP on a WAN interface under RIP
+ Version 1 rules. ripV2Demand indicates the use of
+ Demand RIP on a WAN interface under Version 2 rules."
+ DEFVAL { rip1Compatible }
+ ::= { rip2IfConfEntry 5 }
+
+ rip2IfConfReceive OBJECT-TYPE
+ SYNTAX INTEGER {
+ rip1 (1),
+ rip2 (2),
+ rip1OrRip2 (3),
+ doNotRecieve (4)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This indicates which version of RIP updates
+ are to be accepted. Note that rip2 and
+ rip1OrRip2 implies reception of multicast
+ packets."
+ DEFVAL { rip1OrRip2 }
+ ::= { rip2IfConfEntry 6 }
+
+ rip2IfConfDefaultMetric OBJECT-TYPE
+ SYNTAX INTEGER ( 0..15 )
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This variable indicates the metric that is to
+ be used for the default route entry in RIP updates
+ originated on this interface. A value of zero
+ indicates that no default route should be
+ originated; in this case, a default route via
+ another router may be propagated."
+ ::= { rip2IfConfEntry 7 }
+
+ rip2IfConfStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Writing invalid has the effect of deleting
+ this interface."
+ ::= { rip2IfConfEntry 8 }
+
+ rip2IfConfSrcAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The IP Address this system will use as a source
+ address on this interface. If it is a numbered
+ interface, this MUST be the same value as
+ rip2IfConfAddress. On unnumbered interfaces,
+ it must be the value of rip2IfConfAddress for
+ some interface on the system."
+ ::= { rip2IfConfEntry 9 }
+
+--4.3 Peer Table
+
+-- Peer Table
+
+-- The RIP Peer Group
+-- Implementation of this Group is Optional
+
+-- This group provides information about active peer
+-- relationships intended to assist in debugging. An
+-- active peer is a router from which a valid RIP
+-- updated has been heard in the last 180 seconds.
+
+ rip2PeerTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rip2PeerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of RIP Peers."
+ ::= { rip2 4 }
+
+ rip2PeerEntry OBJECT-TYPE
+ SYNTAX Rip2PeerEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information regarding a single routing peer."
+ INDEX { rip2PeerAddress, rip2PeerDomain }
+ ::= { rip2PeerTable 1 }
+
+ Rip2PeerEntry ::=
+ SEQUENCE {
+ rip2PeerAddress
+ IpAddress,
+ rip2PeerDomain
+ RouteTag,
+ rip2PeerLastUpdate
+ TimeTicks,
+ rip2PeerVersion
+ INTEGER,
+ rip2PeerRcvBadPackets
+ Counter32,
+ rip2PeerRcvBadRoutes
+ Counter32
+ }
+
+ rip2PeerAddress OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The IP Address that the peer is using as its source
+ address. Note that on an unnumbered link, this may
+ not be a member of any subnet on the system."
+ ::= { rip2PeerEntry 1 }
+
+ rip2PeerDomain OBJECT-TYPE
+ SYNTAX RouteTag
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value in the Routing Domain field in RIP
+ packets received from the peer. As domain suuport
+ is deprecated, this must be zero."
+ ::= { rip2PeerEntry 2 }
+
+ rip2PeerLastUpdate OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when the most recent
+ RIP update was received from this system."
+ ::= { rip2PeerEntry 3 }
+
+ rip2PeerVersion OBJECT-TYPE
+ SYNTAX INTEGER ( 0..255 )
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The RIP version number in the header of the
+ last RIP packet received."
+ ::= { rip2PeerEntry 4 }
+
+ rip2PeerRcvBadPackets OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of RIP response packets from this
+ peer discarded as invalid."
+ ::= { rip2PeerEntry 5 }
+
+
+ rip2PeerRcvBadRoutes OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of routes from this peer that were
+ ignored because the entry format was invalid."
+ ::= { rip2PeerEntry 6 }
+
+-- conformance information
+
+rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 }
+
+rip2Groups OBJECT IDENTIFIER ::= { rip2Conformance 1 }
+rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 }
+
+-- compliance statements
+rip2Compliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement "
+ MODULE -- this module
+ MANDATORY-GROUPS {
+ rip2GlobalGroup,
+ rip2IfStatGroup,
+ rip2IfConfGroup,
+ rip2PeerGroup
+ }
+ GROUP rip2GlobalGroup
+ DESCRIPTION
+ "This group defines global controls for RIP-II systems."
+ GROUP rip2IfStatGroup
+ DESCRIPTION
+ "This group defines interface statistics for RIP-II systems."
+ GROUP rip2IfConfGroup
+ DESCRIPTION
+ "This group defines interface configuration for RIP-II systems."
+ GROUP rip2PeerGroup
+ DESCRIPTION
+ "This group defines peer information for RIP-II systems."
+ ::= { rip2Compliances 1 }
+
+-- units of conformance
+
+rip2GlobalGroup OBJECT-GROUP
+ OBJECTS {
+ rip2GlobalRouteChanges,
+ rip2GlobalQueries
+ }
+ STATUS current
+ DESCRIPTION
+ "This group defines global controls for RIP-II systems."
+ ::= { rip2Groups 1 }
+rip2IfStatGroup OBJECT-GROUP
+ OBJECTS {
+ rip2IfStatAddress,
+ rip2IfStatRcvBadPackets,
+ rip2IfStatRcvBadRoutes,
+ rip2IfStatSentUpdates,
+ rip2IfStatStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "This group defines interface statistics for RIP-II systems."
+ ::= { rip2Groups 2 }
+rip2IfConfGroup OBJECT-GROUP
+ OBJECTS {
+ rip2IfConfAddress,
+ rip2IfConfAuthType,
+ rip2IfConfAuthKey,
+ rip2IfConfSend,
+ rip2IfConfReceive,
+ rip2IfConfDefaultMetric,
+ rip2IfConfStatus,
+ rip2IfConfSrcAddress
+ }
+ STATUS current
+ DESCRIPTION
+ "This group defines interface configuration for RIP-II systems."
+ ::= { rip2Groups 3 }
+rip2PeerGroup OBJECT-GROUP
+ OBJECTS {
+ rip2PeerAddress,
+ rip2PeerDomain,
+ rip2PeerLastUpdate,
+ rip2PeerVersion,
+ rip2PeerRcvBadPackets,
+ rip2PeerRcvBadRoutes
+ }
+ STATUS current
+ DESCRIPTION
+ "This group defines peer information for RIP-II systems."
+ ::= { rip2Groups 4 }
+END
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 16:49:53 +0000