diff options
Diffstat (limited to 'mibs/RMON-MIB.txt')
| -rw-r--r-- | mibs/RMON-MIB.txt | 3980 |
1 files changed, 3980 insertions, 0 deletions
diff --git a/mibs/RMON-MIB.txt b/mibs/RMON-MIB.txt new file mode 100644 index 000000000..983c22ef5 --- /dev/null +++ b/mibs/RMON-MIB.txt @@ -0,0 +1,3980 @@ +RMON-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, + NOTIFICATION-TYPE, mib-2, Counter32, + Integer32, TimeTicks FROM SNMPv2-SMI + + TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC + + MODULE-COMPLIANCE, OBJECT-GROUP, + NOTIFICATION-GROUP FROM SNMPv2-CONF; + +-- Remote Network Monitoring MIB + +rmonMibModule MODULE-IDENTITY + LAST-UPDATED "200005110000Z" -- 11 May, 2000 + ORGANIZATION "IETF RMON MIB Working Group" + CONTACT-INFO + "Steve Waldbusser + Phone: +1-650-948-6500 + Fax: +1-650-745-0671 + Email: waldbusser@nextbeacon.com" + DESCRIPTION + "Remote network monitoring devices, often called + monitors or probes, are instruments that exist for + the purpose of managing a network. This MIB defines + objects for managing remote network monitoring devices." + + REVISION "200005110000Z" -- 11 May, 2000 + DESCRIPTION + "Reformatted into SMIv2 format. + + This version published as RFC 2819." + + REVISION "199502010000Z" -- 1 Feb, 1995 + DESCRIPTION + "Bug fixes, clarifications and minor changes based on + implementation experience, published as RFC1757 [18]. + + Two changes were made to object definitions: + + 1) A new status bit has been defined for the + captureBufferPacketStatus object, indicating that the + packet order within the capture buffer may not be identical to + the packet order as received off the wire. This bit may only + + be used for packets transmitted by the probe. Older NMS + applications can safely ignore this status bit, which might be + used by newer agents. + + 2) The packetMatch trap has been removed. This trap was never + actually 'approved' and was not added to this document along + with the risingAlarm and fallingAlarm traps. The packetMatch + trap could not be throttled, which could cause disruption of + normal network traffic under some circumstances. An NMS should + configure a risingAlarm threshold on the appropriate + channelMatches instance if a trap is desired for a packetMatch + event. Note that logging of packetMatch events is still + supported--only trap generation for such events has been + removed. + + In addition, several clarifications to individual object + definitions have been added to assist agent and NMS + implementors: + + - global definition of 'good packets' and 'bad packets' + + - more detailed text governing conceptual row creation and + modification + + - instructions for probes relating to interface changes and + disruptions + + - clarification of some ethernet counter definitions + + - recommended formula for calculating network utilization + + - clarification of channel and captureBuffer behavior for some + unusual conditions + + - examples of proper instance naming for each table" + + REVISION "199111010000Z" -- 1 Nov, 1991 + DESCRIPTION + "The original version of this MIB, published as RFC1271." + ::= { rmonConformance 8 } + + rmon OBJECT IDENTIFIER ::= { mib-2 16 } + + -- textual conventions + +OwnerString ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This data type is used to model an administratively + assigned name of the owner of a resource. Implementations + must accept values composed of well-formed NVT ASCII + sequences. In addition, implementations should accept + values composed of well-formed UTF-8 sequences. + + It is suggested that this name contain one or more of + the following: IP address, management station name, + network manager's name, location, or phone number. + In some cases the agent itself will be the owner of + an entry. In these cases, this string shall be set + to a string starting with 'monitor'. + + SNMP access control is articulated entirely in terms + of the contents of MIB views; access to a particular + SNMP object instance depends only upon its presence + or absence in a particular MIB view and never upon + its value or the value of related object instances. + Thus, objects of this type afford resolution of + resource contention only among cooperating + managers; they realize no access control function + with respect to uncooperative parties." + SYNTAX OCTET STRING (SIZE (0..127)) + +EntryStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The status of a table entry. + + Setting this object to the value invalid(4) has the + effect of invalidating the corresponding entry. + That is, it effectively disassociates the mapping + identified with said entry. + It is an implementation-specific matter as to whether + the agent removes an invalidated entry from the table. + Accordingly, management stations must be prepared to + receive tabular information from agents that corresponds + to entries currently not in use. Proper + interpretation of such entries requires examination + of the relevant EntryStatus object. + + An existing instance of this object cannot be set to + createRequest(2). This object may only be set to + createRequest(2) when this instance is created. When + this object is created, the agent may wish to create + supplemental object instances with default values + to complete a conceptual row in this table. Because the + + creation of these default objects is entirely at the option + of the agent, the manager must not assume that any will be + created, but may make use of any that are created. + Immediately after completing the create operation, the agent + must set this object to underCreation(3). + + When in the underCreation(3) state, an entry is allowed to + exist in a possibly incomplete, possibly inconsistent state, + usually to allow it to be modified in multiple PDUs. When in + this state, an entry is not fully active. + Entries shall exist in the underCreation(3) state until + the management station is finished configuring the entry + and sets this object to valid(1) or aborts, setting this + object to invalid(4). If the agent determines that an + entry has been in the underCreation(3) state for an + abnormally long time, it may decide that the management + station has crashed. If the agent makes this decision, + it may set this object to invalid(4) to reclaim the + entry. A prudent agent will understand that the + management station may need to wait for human input + and will allow for that possibility in its + determination of this abnormally long period. + + An entry in the valid(1) state is fully configured and + consistent and fully represents the configuration or + operation such a row is intended to represent. For + example, it could be a statistical function that is + configured and active, or a filter that is available + in the list of filters processed by the packet capture + process. + + A manager is restricted to changing the state of an entry in + the following ways: + + To: valid createRequest underCreation invalid + From: + valid OK NO OK OK + createRequest N/A N/A N/A N/A + underCreation OK NO OK OK + invalid NO NO NO OK + nonExistent NO OK NO OK + + In the table above, it is not applicable to move the state + from the createRequest state to any other state because the + manager will never find the variable in that state. The + nonExistent state is not a value of the enumeration, rather + it means that the entryStatus variable does not exist at all. + + An agent may allow an entryStatus variable to change state in + additional ways, so long as the semantics of the states are + followed. This allowance is made to ease the implementation of + the agent and is made despite the fact that managers should + never exercise these additional state transitions." + SYNTAX INTEGER { + valid(1), + createRequest(2), + underCreation(3), + invalid(4) + } + + statistics OBJECT IDENTIFIER ::= { rmon 1 } + history OBJECT IDENTIFIER ::= { rmon 2 } + alarm OBJECT IDENTIFIER ::= { rmon 3 } + hosts OBJECT IDENTIFIER ::= { rmon 4 } + hostTopN OBJECT IDENTIFIER ::= { rmon 5 } + matrix OBJECT IDENTIFIER ::= { rmon 6 } + filter OBJECT IDENTIFIER ::= { rmon 7 } + capture OBJECT IDENTIFIER ::= { rmon 8 } + event OBJECT IDENTIFIER ::= { rmon 9 } + rmonConformance OBJECT IDENTIFIER ::= { rmon 20 } + +-- The Ethernet Statistics Group +-- +-- Implementation of the Ethernet Statistics group is optional. +-- Consult the MODULE-COMPLIANCE macro for the authoritative +-- conformance information for this MIB. +-- +-- The ethernet statistics group contains statistics measured by the +-- probe for each monitored interface on this device. These +-- statistics take the form of free running counters that start from +-- zero when a valid entry is created. +-- +-- This group currently has statistics defined only for +-- Ethernet interfaces. Each etherStatsEntry contains statistics +-- for one Ethernet interface. The probe must create one +-- etherStats entry for each monitored Ethernet interface +-- on the device. + +etherStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF EtherStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of Ethernet statistics entries." + ::= { statistics 1 } + +etherStatsEntry OBJECT-TYPE + SYNTAX EtherStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A collection of statistics kept for a particular + Ethernet interface. As an example, an instance of the + etherStatsPkts object might be named etherStatsPkts.1" + INDEX { etherStatsIndex } + ::= { etherStatsTable 1 } + +EtherStatsEntry ::= SEQUENCE { + etherStatsIndex Integer32, + etherStatsDataSource OBJECT IDENTIFIER, + etherStatsDropEvents Counter32, + etherStatsOctets Counter32, + etherStatsPkts Counter32, + etherStatsBroadcastPkts Counter32, + etherStatsMulticastPkts Counter32, + etherStatsCRCAlignErrors Counter32, + etherStatsUndersizePkts Counter32, + etherStatsOversizePkts Counter32, + etherStatsFragments Counter32, + etherStatsJabbers Counter32, + etherStatsCollisions Counter32, + etherStatsPkts64Octets Counter32, + etherStatsPkts65to127Octets Counter32, + etherStatsPkts128to255Octets Counter32, + etherStatsPkts256to511Octets Counter32, + etherStatsPkts512to1023Octets Counter32, + etherStatsPkts1024to1518Octets Counter32, + etherStatsOwner OwnerString, + etherStatsStatus EntryStatus +} + +etherStatsIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object uniquely identifies this + etherStats entry." + ::= { etherStatsEntry 1 } + +etherStatsDataSource OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object identifies the source of the data that + this etherStats entry is configured to analyze. This + source can be any ethernet interface on this device. + In order to identify a particular interface, this object + shall identify the instance of the ifIndex object, + defined in RFC 2233 [17], for the desired interface. + For example, if an entry were to receive data from + interface #1, this object would be set to ifIndex.1. + + The statistics in this group reflect all packets + on the local network segment attached to the identified + interface. + + An agent may or may not be able to tell if fundamental + changes to the media of the interface have occurred and + necessitate an invalidation of this entry. For example, a + hot-pluggable ethernet card could be pulled out and replaced + by a token-ring card. In such a case, if the agent has such + knowledge of the change, it is recommended that it + invalidate this entry. + + This object may not be modified if the associated + etherStatsStatus object is equal to valid(1)." + ::= { etherStatsEntry 2 } + +etherStatsDropEvents OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of events in which packets + were dropped by the probe due to lack of resources. + Note that this number is not necessarily the number of + packets dropped; it is just the number of times this + condition has been detected." + ::= { etherStatsEntry 3 } + +etherStatsOctets OBJECT-TYPE + SYNTAX Counter32 + UNITS "Octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets of data (including + those in bad packets) received on the + network (excluding framing bits but including + FCS octets). + + This object can be used as a reasonable estimate of + 10-Megabit ethernet utilization. If greater precision is + desired, the etherStatsPkts and etherStatsOctets objects + should be sampled before and after a common interval. The + differences in the sampled values are Pkts and Octets, + respectively, and the number of seconds in the interval is + Interval. These values are used to calculate the Utilization + as follows: + + Pkts * (9.6 + 6.4) + (Octets * .8) + Utilization = ------------------------------------- + Interval * 10,000 + + The result of this equation is the value Utilization which + is the percent utilization of the ethernet segment on a + scale of 0 to 100 percent." + ::= { etherStatsEntry 4 } + +etherStatsPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad packets, + broadcast packets, and multicast packets) received." + ::= { etherStatsEntry 5 } + +etherStatsBroadcastPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of good packets received that were + directed to the broadcast address. Note that this + does not include multicast packets." + ::= { etherStatsEntry 6 } + +etherStatsMulticastPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of good packets received that were + directed to a multicast address. Note that this number + does not include packets directed to the broadcast + + address." + ::= { etherStatsEntry 7 } + +etherStatsCRCAlignErrors OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that + had a length (excluding framing bits, but + including FCS octets) of between 64 and 1518 + octets, inclusive, but had either a bad + Frame Check Sequence (FCS) with an integral + number of octets (FCS Error) or a bad FCS with + a non-integral number of octets (Alignment Error)." + ::= { etherStatsEntry 8 } + +etherStatsUndersizePkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were + less than 64 octets long (excluding framing bits, + but including FCS octets) and were otherwise well + formed." + ::= { etherStatsEntry 9 } + +etherStatsOversizePkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were + longer than 1518 octets (excluding framing bits, + but including FCS octets) and were otherwise + well formed." + ::= { etherStatsEntry 10 } + +etherStatsFragments OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were less than + 64 octets in length (excluding framing bits but including + FCS octets) and had either a bad Frame Check Sequence + (FCS) with an integral number of octets (FCS Error) or a + bad FCS with a non-integral number of octets (Alignment + Error). + + Note that it is entirely normal for etherStatsFragments to + increment. This is because it counts both runts (which are + normal occurrences due to collisions) and noise hits." + ::= { etherStatsEntry 11 } + +etherStatsJabbers OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received that were + longer than 1518 octets (excluding framing bits, + but including FCS octets), and had either a bad + Frame Check Sequence (FCS) with an integral number + of octets (FCS Error) or a bad FCS with a non-integral + number of octets (Alignment Error). + + Note that this definition of jabber is different + than the definition in IEEE-802.3 section 8.2.1.5 + (10BASE5) and section 10.3.1.4 (10BASE2). These + documents define jabber as the condition where any + packet exceeds 20 ms. The allowed range to detect + jabber is between 20 ms and 150 ms." + ::= { etherStatsEntry 12 } + +etherStatsCollisions OBJECT-TYPE + SYNTAX Counter32 + UNITS "Collisions" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The best estimate of the total number of collisions + on this Ethernet segment. + + The value returned will depend on the location of the + RMON probe. Section 8.2.1.3 (10BASE-5) and section + 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a + station must detect a collision, in the receive mode, if + three or more stations are transmitting simultaneously. A + repeater port must detect a collision when two or more + + stations are transmitting simultaneously. Thus a probe + placed on a repeater port could record more collisions + than a probe connected to a station on the same segment + would. + + Probe location plays a much smaller role when considering + 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 + defines a collision as the simultaneous presence of signals + on the DO and RD circuits (transmitting and receiving + at the same time). A 10BASE-T station can only detect + collisions when it is transmitting. Thus probes placed on + a station and a repeater, should report the same number of + collisions. + + Note also that an RMON probe inside a repeater should + ideally report collisions between the repeater and one or + more other hosts (transmit collisions as defined by IEEE + 802.3k) plus receiver collisions observed on any coax + segments to which the repeater is connected." + ::= { etherStatsEntry 13 } + +etherStatsPkts64Octets OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were 64 octets in length + (excluding framing bits but including FCS octets)." + ::= { etherStatsEntry 14 } + +etherStatsPkts65to127Octets OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 65 and 127 octets in length inclusive + (excluding framing bits but including FCS octets)." + ::= { etherStatsEntry 15 } + +etherStatsPkts128to255Octets OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 128 and 255 octets in length inclusive + (excluding framing bits but including FCS octets)." + ::= { etherStatsEntry 16 } + +etherStatsPkts256to511Octets OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 256 and 511 octets in length inclusive + (excluding framing bits but including FCS octets)." + ::= { etherStatsEntry 17 } + +etherStatsPkts512to1023Octets OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 512 and 1023 octets in length inclusive + (excluding framing bits but including FCS octets)." + ::= { etherStatsEntry 18 } + +etherStatsPkts1024to1518Octets OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets (including bad + packets) received that were between + 1024 and 1518 octets in length inclusive + (excluding framing bits but including FCS octets)." + ::= { etherStatsEntry 19 } + +etherStatsOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The entity that configured this entry and is therefore + using the resources assigned to it." + ::= { etherStatsEntry 20 } + +etherStatsStatus OBJECT-TYPE + SYNTAX EntryStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this etherStats entry." + ::= { etherStatsEntry 21 } + +-- The History Control Group + +-- Implementation of the History Control group is optional. +-- Consult the MODULE-COMPLIANCE macro for the authoritative +-- conformance information for this MIB. +-- +-- The history control group controls the periodic statistical +-- sampling of data from various types of networks. The +-- historyControlTable stores configuration entries that each +-- define an interface, polling period, and other parameters. +-- Once samples are taken, their data is stored in an entry +-- in a media-specific table. Each such entry defines one +-- sample, and is associated with the historyControlEntry that +-- caused the sample to be taken. Each counter in the +-- etherHistoryEntry counts the same event as its similarly-named +-- counterpart in the etherStatsEntry, except that each value here +-- is a cumulative sum during a sampling period. +-- +-- If the probe keeps track of the time of day, it should start +-- the first sample of the history at a time such that +-- when the next hour of the day begins, a sample is +-- started at that instant. This tends to make more +-- user-friendly reports, and enables comparison of reports +-- from different probes that have relatively accurate time +-- of day. +-- +-- The probe is encouraged to add two history control entries +-- per monitored interface upon initialization that describe a short +-- term and a long term polling period. Suggested parameters are 30 +-- seconds for the short term polling period and 30 minutes for +-- the long term period. + +historyControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF HistoryControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of history control entries." + ::= { history 1 } + +historyControlEntry OBJECT-TYPE + SYNTAX HistoryControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of parameters that set up a periodic sampling of + statistics. As an example, an instance of the + historyControlInterval object might be named + historyControlInterval.2" + INDEX { historyControlIndex } + ::= { historyControlTable 1 } + +HistoryControlEntry ::= SEQUENCE { + historyControlIndex Integer32, + historyControlDataSource OBJECT IDENTIFIER, + historyControlBucketsRequested Integer32, + historyControlBucketsGranted Integer32, + historyControlInterval Integer32, + historyControlOwner OwnerString, + historyControlStatus EntryStatus +} + +historyControlIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry in the + historyControl table. Each such entry defines a + set of samples at a particular interval for an + interface on the device." + ::= { historyControlEntry 1 } + +historyControlDataSource OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object identifies the source of the data for + which historical data was collected and + placed in a media-specific table on behalf of this + historyControlEntry. This source can be any + interface on this device. In order to identify + + a particular interface, this object shall identify + the instance of the ifIndex object, defined + in RFC 2233 [17], for the desired interface. + For example, if an entry were to receive data from + interface #1, this object would be set to ifIndex.1. + + The statistics in this group reflect all packets + on the local network segment attached to the identified + interface. + + An agent may or may not be able to tell if fundamental + changes to the media of the interface have occurred and + necessitate an invalidation of this entry. For example, a + hot-pluggable ethernet card could be pulled out and replaced + by a token-ring card. In such a case, if the agent has such + knowledge of the change, it is recommended that it + invalidate this entry. + + This object may not be modified if the associated + historyControlStatus object is equal to valid(1)." + ::= { historyControlEntry 2 } + +historyControlBucketsRequested OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The requested number of discrete time intervals + over which data is to be saved in the part of the + media-specific table associated with this + historyControlEntry. + + When this object is created or modified, the probe + should set historyControlBucketsGranted as closely to + this object as is possible for the particular probe + implementation and available resources." + DEFVAL { 50 } + ::= { historyControlEntry 3 } + +historyControlBucketsGranted OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of discrete sampling intervals + over which data shall be saved in the part of + the media-specific table associated with this + historyControlEntry. + + When the associated historyControlBucketsRequested + object is created or modified, the probe + should set this object as closely to the requested + value as is possible for the particular + probe implementation and available resources. The + probe must not lower this value except as a result + of a modification to the associated + historyControlBucketsRequested object. + + There will be times when the actual number of + buckets associated with this entry is less than + the value of this object. In this case, at the + end of each sampling interval, a new bucket will + be added to the media-specific table. + + When the number of buckets reaches the value of + this object and a new bucket is to be added to the + media-specific table, the oldest bucket associated + with this historyControlEntry shall be deleted by + the agent so that the new bucket can be added. + + When the value of this object changes to a value less + than the current value, entries are deleted + from the media-specific table associated with this + historyControlEntry. Enough of the oldest of these + entries shall be deleted by the agent so that their + number remains less than or equal to the new value of + this object. + + When the value of this object changes to a value greater + than the current value, the number of associated media- + specific entries may be allowed to grow." + ::= { historyControlEntry 4 } + +historyControlInterval OBJECT-TYPE + SYNTAX Integer32 (1..3600) + UNITS "Seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The interval in seconds over which the data is + sampled for each bucket in the part of the + media-specific table associated with this + historyControlEntry. This interval can + be set to any number of seconds between 1 and + 3600 (1 hour). + + Because the counters in a bucket may overflow at their + + maximum value with no indication, a prudent manager will + take into account the possibility of overflow in any of + the associated counters. It is important to consider the + minimum time in which any counter could overflow on a + particular media type and set the historyControlInterval + object to a value less than this interval. This is + typically most important for the 'octets' counter in any + media-specific table. For example, on an Ethernet + network, the etherHistoryOctets counter could overflow + in about one hour at the Ethernet's maximum + utilization. + + This object may not be modified if the associated + historyControlStatus object is equal to valid(1)." + DEFVAL { 1800 } + ::= { historyControlEntry 5 } + +historyControlOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The entity that configured this entry and is therefore + using the resources assigned to it." + ::= { historyControlEntry 6 } + +historyControlStatus OBJECT-TYPE + SYNTAX EntryStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this historyControl entry. + + Each instance of the media-specific table associated + with this historyControlEntry will be deleted by the agent + if this historyControlEntry is not equal to valid(1)." + ::= { historyControlEntry 7 } + +-- The Ethernet History Group + +-- Implementation of the Ethernet History group is optional. +-- Consult the MODULE-COMPLIANCE macro for the authoritative +-- conformance information for this MIB. +-- +-- The Ethernet History group records periodic statistical samples +-- from a network and stores them for later retrieval. +-- Once samples are taken, their data is stored in an entry +-- in a media-specific table. Each such entry defines one + +-- sample, and is associated with the historyControlEntry that +-- caused the sample to be taken. This group defines the +-- etherHistoryTable, for Ethernet networks. +-- + +etherHistoryTable OBJECT-TYPE + SYNTAX SEQUENCE OF EtherHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of Ethernet history entries." + ::= { history 2 } + +etherHistoryEntry OBJECT-TYPE + SYNTAX EtherHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An historical sample of Ethernet statistics on a particular + Ethernet interface. This sample is associated with the + historyControlEntry which set up the parameters for + a regular collection of these samples. As an example, an + instance of the etherHistoryPkts object might be named + etherHistoryPkts.2.89" + INDEX { etherHistoryIndex , etherHistorySampleIndex } + ::= { etherHistoryTable 1 } + +EtherHistoryEntry ::= SEQUENCE { + etherHistoryIndex Integer32, + etherHistorySampleIndex Integer32, + etherHistoryIntervalStart TimeTicks, + etherHistoryDropEvents Counter32, + etherHistoryOctets Counter32, + etherHistoryPkts Counter32, + etherHistoryBroadcastPkts Counter32, + etherHistoryMulticastPkts Counter32, + etherHistoryCRCAlignErrors Counter32, + etherHistoryUndersizePkts Counter32, + etherHistoryOversizePkts Counter32, + etherHistoryFragments Counter32, + etherHistoryJabbers Counter32, + etherHistoryCollisions Counter32, + etherHistoryUtilization Integer32 +} + +etherHistoryIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The history of which this entry is a part. The + history identified by a particular value of this + index is the same history as identified + by the same value of historyControlIndex." + ::= { etherHistoryEntry 1 } + +etherHistorySampleIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies the particular + sample this entry represents among all samples + associated with the same historyControlEntry. + This index starts at 1 and increases by one + as each new sample is taken." + ::= { etherHistoryEntry 2 } + +etherHistoryIntervalStart OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the start of the interval + over which this sample was measured. If the probe + keeps track of the time of day, it should start + the first sample of the history at a time such that + when the next hour of the day begins, a sample is + started at that instant. Note that following this + rule may require the probe to delay collecting the + first sample of the history, as each sample must be + of the same interval. Also note that the sample which + is currently being collected is not accessible in this + table until the end of its interval." + ::= { etherHistoryEntry 3 } + +etherHistoryDropEvents OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of events in which packets + were dropped by the probe due to lack of resources + during this sampling interval. Note that this number + is not necessarily the number of packets dropped, it + is just the number of times this condition has been + + detected." + ::= { etherHistoryEntry 4 } + +etherHistoryOctets OBJECT-TYPE + SYNTAX Counter32 + UNITS "Octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets of data (including + those in bad packets) received on the + network (excluding framing bits but including + FCS octets)." + ::= { etherHistoryEntry 5 } + +etherHistoryPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets (including bad packets) + received during this sampling interval." + ::= { etherHistoryEntry 6 } + +etherHistoryBroadcastPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of good packets received during this + sampling interval that were directed to the + broadcast address." + ::= { etherHistoryEntry 7 } + +etherHistoryMulticastPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of good packets received during this + sampling interval that were directed to a + multicast address. Note that this number does not + include packets addressed to the broadcast address." + ::= { etherHistoryEntry 8 } + +etherHistoryCRCAlignErrors OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets received during this + sampling interval that had a length (excluding + framing bits but including FCS octets) between + 64 and 1518 octets, inclusive, but had either a bad Frame + Check Sequence (FCS) with an integral number of octets + (FCS Error) or a bad FCS with a non-integral number + of octets (Alignment Error)." + ::= { etherHistoryEntry 9 } + +etherHistoryUndersizePkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets received during this + sampling interval that were less than 64 octets + long (excluding framing bits but including FCS + octets) and were otherwise well formed." + ::= { etherHistoryEntry 10 } + +etherHistoryOversizePkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets received during this + sampling interval that were longer than 1518 + octets (excluding framing bits but including + FCS octets) but were otherwise well formed." + ::= { etherHistoryEntry 11 } + +etherHistoryFragments OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received during this + sampling interval that were less than 64 octets in + length (excluding framing bits but including FCS + + octets) had either a bad Frame Check Sequence (FCS) + with an integral number of octets (FCS Error) or a bad + FCS with a non-integral number of octets (Alignment + Error). + + Note that it is entirely normal for etherHistoryFragments to + increment. This is because it counts both runts (which are + normal occurrences due to collisions) and noise hits." + ::= { etherHistoryEntry 12 } + +etherHistoryJabbers OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets received during this + sampling interval that were longer than 1518 octets + (excluding framing bits but including FCS octets), + and had either a bad Frame Check Sequence (FCS) + with an integral number of octets (FCS Error) or + a bad FCS with a non-integral number of octets + (Alignment Error). + + Note that this definition of jabber is different + than the definition in IEEE-802.3 section 8.2.1.5 + (10BASE5) and section 10.3.1.4 (10BASE2). These + documents define jabber as the condition where any + packet exceeds 20 ms. The allowed range to detect + jabber is between 20 ms and 150 ms." + ::= { etherHistoryEntry 13 } + +etherHistoryCollisions OBJECT-TYPE + SYNTAX Counter32 + UNITS "Collisions" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The best estimate of the total number of collisions + on this Ethernet segment during this sampling + interval. + + The value returned will depend on the location of the + RMON probe. Section 8.2.1.3 (10BASE-5) and section + 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a + station must detect a collision, in the receive mode, if + three or more stations are transmitting simultaneously. A + repeater port must detect a collision when two or more + + stations are transmitting simultaneously. Thus a probe + placed on a repeater port could record more collisions + than a probe connected to a station on the same segment + would. + + Probe location plays a much smaller role when considering + 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 + defines a collision as the simultaneous presence of signals + on the DO and RD circuits (transmitting and receiving + at the same time). A 10BASE-T station can only detect + collisions when it is transmitting. Thus probes placed on + a station and a repeater, should report the same number of + collisions. + + Note also that an RMON probe inside a repeater should + ideally report collisions between the repeater and one or + more other hosts (transmit collisions as defined by IEEE + 802.3k) plus receiver collisions observed on any coax + segments to which the repeater is connected." + ::= { etherHistoryEntry 14 } + +etherHistoryUtilization OBJECT-TYPE + SYNTAX Integer32 (0..10000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The best estimate of the mean physical layer + network utilization on this interface during this + sampling interval, in hundredths of a percent." + ::= { etherHistoryEntry 15 } + +-- The Alarm Group + +-- Implementation of the Alarm group is optional. The Alarm Group +-- requires the implementation of the Event group. +-- Consult the MODULE-COMPLIANCE macro for the authoritative +-- conformance information for this MIB. +-- +-- The Alarm group periodically takes statistical samples from +-- variables in the probe and compares them to thresholds that have +-- been configured. The alarm table stores configuration +-- entries that each define a variable, polling period, and +-- threshold parameters. If a sample is found to cross the +-- threshold values, an event is generated. Only variables that +-- resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, +-- Counter32, Counter64, Gauge32, or TimeTicks) may be monitored in +-- this way. +-- + +-- This function has a hysteresis mechanism to limit the generation +-- of events. This mechanism generates one event as a threshold +-- is crossed in the appropriate direction. No more events are +-- generated for that threshold until the opposite threshold is +-- crossed. +-- +-- In the case of a sampling a deltaValue, a probe may implement +-- this mechanism with more precision if it takes a delta sample +-- twice per period, each time comparing the sum of the latest two +-- samples to the threshold. This allows the detection of threshold +-- crossings that span the sampling boundary. Note that this does +-- not require any special configuration of the threshold value. +-- It is suggested that probes implement this more precise algorithm. + +alarmTable OBJECT-TYPE + SYNTAX SEQUENCE OF AlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of alarm entries." + ::= { alarm 1 } + +alarmEntry OBJECT-TYPE + SYNTAX AlarmEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of parameters that set up a periodic checking + for alarm conditions. For example, an instance of the + alarmValue object might be named alarmValue.8" + INDEX { alarmIndex } + ::= { alarmTable 1 } + +AlarmEntry ::= SEQUENCE { + alarmIndex Integer32, + alarmInterval Integer32, + alarmVariable OBJECT IDENTIFIER, + alarmSampleType INTEGER, + alarmValue Integer32, + alarmStartupAlarm INTEGER, + alarmRisingThreshold Integer32, + alarmFallingThreshold Integer32, + alarmRisingEventIndex Integer32, + alarmFallingEventIndex Integer32, + alarmOwner OwnerString, + alarmStatus EntryStatus +} + +alarmIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry in the + alarm table. Each such entry defines a + diagnostic sample at a particular interval + for an object on the device." + ::= { alarmEntry 1 } + +alarmInterval OBJECT-TYPE + SYNTAX Integer32 + UNITS "Seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The interval in seconds over which the data is + sampled and compared with the rising and falling + thresholds. When setting this variable, care + should be taken in the case of deltaValue + sampling - the interval should be set short enough + that the sampled variable is very unlikely to + increase or decrease by more than 2^31 - 1 during + a single sampling interval. + + This object may not be modified if the associated + alarmStatus object is equal to valid(1)." + ::= { alarmEntry 2 } + +alarmVariable OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The object identifier of the particular variable to be + sampled. Only variables that resolve to an ASN.1 primitive + type of INTEGER (INTEGER, Integer32, Counter32, Counter64, + Gauge, or TimeTicks) may be sampled. + + Because SNMP access control is articulated entirely + in terms of the contents of MIB views, no access + control mechanism exists that can restrict the value of + this object to identify only those objects that exist + in a particular MIB view. Because there is thus no + acceptable means of restricting the read access that + could be obtained through the alarm mechanism, the + probe must only grant write access to this object in + + those views that have read access to all objects on + the probe. + + During a set operation, if the supplied variable name is + not available in the selected MIB view, a badValue error + must be returned. If at any time the variable name of + an established alarmEntry is no longer available in the + selected MIB view, the probe must change the status of + this alarmEntry to invalid(4). + + This object may not be modified if the associated + alarmStatus object is equal to valid(1)." + ::= { alarmEntry 3 } + +alarmSampleType OBJECT-TYPE + SYNTAX INTEGER { + absoluteValue(1), + deltaValue(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The method of sampling the selected variable and + calculating the value to be compared against the + thresholds. If the value of this object is + absoluteValue(1), the value of the selected variable + will be compared directly with the thresholds at the + end of the sampling interval. If the value of this + object is deltaValue(2), the value of the selected + variable at the last sample will be subtracted from + the current value, and the difference compared with + the thresholds. + + This object may not be modified if the associated + alarmStatus object is equal to valid(1)." + ::= { alarmEntry 4 } + +alarmValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of the statistic during the last sampling + period. For example, if the sample type is deltaValue, + this value will be the difference between the samples + at the beginning and end of the period. If the sample + type is absoluteValue, this value will be the sampled + value at the end of the period. + + This is the value that is compared with the rising and + falling thresholds. + + The value during the current sampling period is not + made available until the period is completed and will + remain available until the next period completes." + ::= { alarmEntry 5 } + +alarmStartupAlarm OBJECT-TYPE + SYNTAX INTEGER { + risingAlarm(1), + fallingAlarm(2), + risingOrFallingAlarm(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The alarm that may be sent when this entry is first + set to valid. If the first sample after this entry + becomes valid is greater than or equal to the + risingThreshold and alarmStartupAlarm is equal to + risingAlarm(1) or risingOrFallingAlarm(3), then a single + rising alarm will be generated. If the first sample + after this entry becomes valid is less than or equal + to the fallingThreshold and alarmStartupAlarm is equal + to fallingAlarm(2) or risingOrFallingAlarm(3), then a + single falling alarm will be generated. + + This object may not be modified if the associated + alarmStatus object is equal to valid(1)." + ::= { alarmEntry 6 } + +alarmRisingThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A threshold for the sampled statistic. When the current + sampled value is greater than or equal to this threshold, + and the value at the last sampling interval was less than + this threshold, a single event will be generated. + A single event will also be generated if the first + sample after this entry becomes valid is greater than or + equal to this threshold and the associated + alarmStartupAlarm is equal to risingAlarm(1) or + risingOrFallingAlarm(3). + + After a rising event is generated, another such event + + will not be generated until the sampled value + falls below this threshold and reaches the + alarmFallingThreshold. + + This object may not be modified if the associated + alarmStatus object is equal to valid(1)." + ::= { alarmEntry 7 } + +alarmFallingThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A threshold for the sampled statistic. When the current + sampled value is less than or equal to this threshold, + and the value at the last sampling interval was greater than + this threshold, a single event will be generated. + A single event will also be generated if the first + sample after this entry becomes valid is less than or + equal to this threshold and the associated + alarmStartupAlarm is equal to fallingAlarm(2) or + risingOrFallingAlarm(3). + + After a falling event is generated, another such event + will not be generated until the sampled value + rises above this threshold and reaches the + alarmRisingThreshold. + + This object may not be modified if the associated + alarmStatus object is equal to valid(1)." + ::= { alarmEntry 8 } + +alarmRisingEventIndex OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The index of the eventEntry that is + used when a rising threshold is crossed. The + eventEntry identified by a particular value of + this index is the same as identified by the same value + of the eventIndex object. If there is no + corresponding entry in the eventTable, then + no association exists. In particular, if this value + is zero, no associated event will be generated, as + zero is not a valid event index. + + This object may not be modified if the associated + + alarmStatus object is equal to valid(1)." + ::= { alarmEntry 9 } + +alarmFallingEventIndex OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The index of the eventEntry that is + used when a falling threshold is crossed. The + eventEntry identified by a particular value of + this index is the same as identified by the same value + of the eventIndex object. If there is no + corresponding entry in the eventTable, then + no association exists. In particular, if this value + is zero, no associated event will be generated, as + zero is not a valid event index. + + This object may not be modified if the associated + alarmStatus object is equal to valid(1)." + ::= { alarmEntry 10 } + +alarmOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The entity that configured this entry and is therefore + using the resources assigned to it." + ::= { alarmEntry 11 } + +alarmStatus OBJECT-TYPE + SYNTAX EntryStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this alarm entry." + ::= { alarmEntry 12 } + +-- The Host Group + +-- Implementation of the Host group is optional. +-- Consult the MODULE-COMPLIANCE macro for the authoritative +-- conformance information for this MIB. +-- +-- The host group discovers new hosts on the network by +-- keeping a list of source and destination MAC Addresses seen +-- in good packets. For each of these addresses, the host group + +-- keeps a set of statistics. The hostControlTable controls +-- which interfaces this function is performed on, and contains +-- some information about the process. On behalf of each +-- hostControlEntry, data is collected on an interface and placed +-- in both the hostTable and the hostTimeTable. If the +-- monitoring device finds itself short of resources, it may +-- delete entries as needed. It is suggested that the device +-- delete the least recently used entries first. + +-- The hostTable contains entries for each address discovered on +-- a particular interface. Each entry contains statistical +-- data about that host. This table is indexed by the +-- MAC address of the host, through which a random access +-- may be achieved. + +-- The hostTimeTable contains data in the same format as the +-- hostTable, and must contain the same set of hosts, but is +-- indexed using hostTimeCreationOrder rather than hostAddress. +-- The hostTimeCreationOrder is an integer which reflects +-- the relative order in which a particular entry was discovered +-- and thus inserted into the table. As this order, and thus +-- the index, is among those entries currently in the table, +-- the index for a particular entry may change if an +-- (earlier) entry is deleted. Thus the association between +-- hostTimeCreationOrder and hostTimeEntry may be broken at +-- any time. + +-- The hostTimeTable has two important uses. The first is the +-- fast download of this potentially large table. Because the +-- index of this table runs from 1 to the size of the table, +-- inclusive, its values are predictable. This allows very +-- efficient packing of variables into SNMP PDU's and allows +-- a table transfer to have multiple packets outstanding. +-- These benefits increase transfer rates tremendously. + +-- The second use of the hostTimeTable is the efficient discovery +-- by the management station of new entries added to the table. +-- After the management station has downloaded the entire table, +-- it knows that new entries will be added immediately after the +-- end of the current table. It can thus detect new entries there +-- and retrieve them easily. + +-- Because the association between hostTimeCreationOrder and +-- hostTimeEntry may be broken at any time, the management +-- station must monitor the related hostControlLastDeleteTime +-- object. When the management station thus detects a deletion, +-- it must assume that any such associations have been broken, +-- and invalidate any it has stored locally. This includes + +-- restarting any download of the hostTimeTable that may have been +-- in progress, as well as rediscovering the end of the +-- hostTimeTable so that it may detect new entries. If the +-- management station does not detect the broken association, +-- it may continue to refer to a particular host by its +-- creationOrder while unwittingly retrieving the data associated +-- with another host entirely. If this happens while downloading +-- the host table, the management station may fail to download +-- all of the entries in the table. + +hostControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF HostControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of host table control entries." + ::= { hosts 1 } + +hostControlEntry OBJECT-TYPE + SYNTAX HostControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of parameters that set up the discovery of hosts + on a particular interface and the collection of statistics + about these hosts. For example, an instance of the + hostControlTableSize object might be named + hostControlTableSize.1" + INDEX { hostControlIndex } + ::= { hostControlTable 1 } + +HostControlEntry ::= SEQUENCE { + + hostControlIndex Integer32, + hostControlDataSource OBJECT IDENTIFIER, + hostControlTableSize Integer32, + hostControlLastDeleteTime TimeTicks, + hostControlOwner OwnerString, + hostControlStatus EntryStatus +} + +hostControlIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry in the + + hostControl table. Each such entry defines + a function that discovers hosts on a particular interface + and places statistics about them in the hostTable and + the hostTimeTable on behalf of this hostControlEntry." + ::= { hostControlEntry 1 } + +hostControlDataSource OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object identifies the source of the data for + this instance of the host function. This source + can be any interface on this device. In order + to identify a particular interface, this object shall + identify the instance of the ifIndex object, defined + in RFC 2233 [17], for the desired interface. + For example, if an entry were to receive data from + interface #1, this object would be set to ifIndex.1. + + The statistics in this group reflect all packets + on the local network segment attached to the identified + interface. + + An agent may or may not be able to tell if fundamental + changes to the media of the interface have occurred and + necessitate an invalidation of this entry. For example, a + hot-pluggable ethernet card could be pulled out and replaced + by a token-ring card. In such a case, if the agent has such + knowledge of the change, it is recommended that it + invalidate this entry. + + This object may not be modified if the associated + hostControlStatus object is equal to valid(1)." + ::= { hostControlEntry 2 } + +hostControlTableSize OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of hostEntries in the hostTable and the + hostTimeTable associated with this hostControlEntry." + ::= { hostControlEntry 3 } + +hostControlLastDeleteTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the last entry + was deleted from the portion of the hostTable + associated with this hostControlEntry. If no + deletions have occurred, this value shall be zero." + ::= { hostControlEntry 4 } + +hostControlOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The entity that configured this entry and is therefore + using the resources assigned to it." + ::= { hostControlEntry 5 } + +hostControlStatus OBJECT-TYPE + SYNTAX EntryStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this hostControl entry. + + If this object is not equal to valid(1), all associated + entries in the hostTable, hostTimeTable, and the + hostTopNTable shall be deleted by the agent." + ::= { hostControlEntry 6 } + +hostTable OBJECT-TYPE + SYNTAX SEQUENCE OF HostEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of host entries." + ::= { hosts 2 } + +hostEntry OBJECT-TYPE + SYNTAX HostEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A collection of statistics for a particular host that has + been discovered on an interface of this device. For example, + an instance of the hostOutBroadcastPkts object might be + named hostOutBroadcastPkts.1.6.8.0.32.27.3.176" + INDEX { hostIndex, hostAddress } + ::= { hostTable 1 } + +HostEntry ::= SEQUENCE { + hostAddress OCTET STRING, + hostCreationOrder Integer32, + hostIndex Integer32, + hostInPkts Counter32, + hostOutPkts Counter32, + hostInOctets Counter32, + hostOutOctets Counter32, + hostOutErrors Counter32, + hostOutBroadcastPkts Counter32, + hostOutMulticastPkts Counter32 +} + +hostAddress OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The physical address of this host." + ::= { hostEntry 1 } + +hostCreationOrder OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that defines the relative ordering of + the creation time of hosts captured for a + particular hostControlEntry. This index shall + be between 1 and N, where N is the value of + the associated hostControlTableSize. The ordering + of the indexes is based on the order of each entry's + insertion into the table, in which entries added earlier + have a lower index value than entries added later. + + It is important to note that the order for a + particular entry may change as an (earlier) entry + is deleted from the table. Because this order may + change, management stations should make use of the + hostControlLastDeleteTime variable in the + hostControlEntry associated with the relevant + portion of the hostTable. By observing + this variable, the management station may detect + the circumstances where a previous association + between a value of hostCreationOrder + and a hostEntry may no longer hold." + ::= { hostEntry 2 } + +hostIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The set of collected host statistics of which + this entry is a part. The set of hosts + identified by a particular value of this + index is associated with the hostControlEntry + as identified by the same value of hostControlIndex." + ::= { hostEntry 3 } + +hostInPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of good packets transmitted to this + address since it was added to the hostTable." + ::= { hostEntry 4 } + +hostOutPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets, including bad packets, transmitted + by this address since it was added to the hostTable." + ::= { hostEntry 5 } + +hostInOctets OBJECT-TYPE + SYNTAX Counter32 + UNITS "Octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of octets transmitted to this address since + it was added to the hostTable (excluding framing + bits but including FCS octets), except for those + octets in bad packets." + ::= { hostEntry 6 } + +hostOutOctets OBJECT-TYPE + SYNTAX Counter32 + UNITS "Octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of octets transmitted by this address since + it was added to the hostTable (excluding framing + bits but including FCS octets), including those + octets in bad packets." + ::= { hostEntry 7 } + +hostOutErrors OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of bad packets transmitted by this address + since this host was added to the hostTable." + ::= { hostEntry 8 } + +hostOutBroadcastPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of good packets transmitted by this + address that were directed to the broadcast address + since this host was added to the hostTable." + ::= { hostEntry 9 } + +hostOutMulticastPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of good packets transmitted by this + address that were directed to a multicast address + since this host was added to the hostTable. + Note that this number does not include packets + directed to the broadcast address." + ::= { hostEntry 10 } + +-- host Time Table + +hostTimeTable OBJECT-TYPE + SYNTAX SEQUENCE OF HostTimeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of time-ordered host table entries." + ::= { hosts 3 } + +hostTimeEntry OBJECT-TYPE + SYNTAX HostTimeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A collection of statistics for a particular host that has + been discovered on an interface of this device. This + collection includes the relative ordering of the creation + time of this object. For example, an instance of the + hostTimeOutBroadcastPkts object might be named + hostTimeOutBroadcastPkts.1.687" + INDEX { hostTimeIndex, hostTimeCreationOrder } + ::= { hostTimeTable 1 } + +HostTimeEntry ::= SEQUENCE { + hostTimeAddress OCTET STRING, + hostTimeCreationOrder Integer32, + hostTimeIndex Integer32, + hostTimeInPkts Counter32, + hostTimeOutPkts Counter32, + hostTimeInOctets Counter32, + hostTimeOutOctets Counter32, + hostTimeOutErrors Counter32, + hostTimeOutBroadcastPkts Counter32, + hostTimeOutMulticastPkts Counter32 +} + +hostTimeAddress OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The physical address of this host." + ::= { hostTimeEntry 1 } + +hostTimeCreationOrder OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry in + the hostTime table among those entries associated + with the same hostControlEntry. This index shall + be between 1 and N, where N is the value of + + the associated hostControlTableSize. The ordering + of the indexes is based on the order of each entry's + insertion into the table, in which entries added earlier + have a lower index value than entries added later. + Thus the management station has the ability to + learn of new entries added to this table without + downloading the entire table. + + It is important to note that the index for a + particular entry may change as an (earlier) entry + is deleted from the table. Because this order may + change, management stations should make use of the + hostControlLastDeleteTime variable in the + hostControlEntry associated with the relevant + portion of the hostTimeTable. By observing + this variable, the management station may detect + the circumstances where a download of the table + may have missed entries, and where a previous + association between a value of hostTimeCreationOrder + and a hostTimeEntry may no longer hold." + ::= { hostTimeEntry 2 } + +hostTimeIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The set of collected host statistics of which + this entry is a part. The set of hosts + identified by a particular value of this + index is associated with the hostControlEntry + as identified by the same value of hostControlIndex." + ::= { hostTimeEntry 3 } + +hostTimeInPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of good packets transmitted to this + address since it was added to the hostTimeTable." + ::= { hostTimeEntry 4 } + +hostTimeOutPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets, including bad packets, transmitted + by this address since it was added to the hostTimeTable." + ::= { hostTimeEntry 5 } + +hostTimeInOctets OBJECT-TYPE + SYNTAX Counter32 + UNITS "Octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of octets transmitted to this address since + it was added to the hostTimeTable (excluding framing + bits but including FCS octets), except for those + octets in bad packets." + ::= { hostTimeEntry 6 } + +hostTimeOutOctets OBJECT-TYPE + SYNTAX Counter32 + UNITS "Octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of octets transmitted by this address since + it was added to the hostTimeTable (excluding framing + bits but including FCS octets), including those + octets in bad packets." + ::= { hostTimeEntry 7 } + +hostTimeOutErrors OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of bad packets transmitted by this address + since this host was added to the hostTimeTable." + ::= { hostTimeEntry 8 } + +hostTimeOutBroadcastPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of good packets transmitted by this + address that were directed to the broadcast address + + since this host was added to the hostTimeTable." + ::= { hostTimeEntry 9 } + +hostTimeOutMulticastPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of good packets transmitted by this + address that were directed to a multicast address + since this host was added to the hostTimeTable. + Note that this number does not include packets directed + to the broadcast address." + ::= { hostTimeEntry 10 } + +-- The Host Top "N" Group + +-- Implementation of the Host Top N group is optional. The Host Top N +-- group requires the implementation of the host group. +-- Consult the MODULE-COMPLIANCE macro for the authoritative +-- conformance information for this MIB. +-- +-- The Host Top N group is used to prepare reports that describe +-- the hosts that top a list ordered by one of their statistics. +-- The available statistics are samples of one of their +-- base statistics, over an interval specified by the management +-- station. Thus, these statistics are rate based. The management +-- station also selects how many such hosts are reported. + +-- The hostTopNControlTable is used to initiate the generation of +-- such a report. The management station may select the parameters +-- of such a report, such as which interface, which statistic, +-- how many hosts, and the start and stop times of the sampling. +-- When the report is prepared, entries are created in the +-- hostTopNTable associated with the relevant hostTopNControlEntry. +-- These entries are static for each report after it has been +-- prepared. + +hostTopNControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF HostTopNControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of top N host control entries." + ::= { hostTopN 1 } + +hostTopNControlEntry OBJECT-TYPE + SYNTAX HostTopNControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A set of parameters that control the creation of a report + of the top N hosts according to several metrics. For + example, an instance of the hostTopNDuration object might + be named hostTopNDuration.3" + INDEX { hostTopNControlIndex } + ::= { hostTopNControlTable 1 } + +HostTopNControlEntry ::= SEQUENCE { + hostTopNControlIndex Integer32, + hostTopNHostIndex Integer32, + hostTopNRateBase INTEGER, + hostTopNTimeRemaining Integer32, + hostTopNDuration Integer32, + hostTopNRequestedSize Integer32, + hostTopNGrantedSize Integer32, + hostTopNStartTime TimeTicks, + hostTopNOwner OwnerString, + hostTopNStatus EntryStatus +} + +hostTopNControlIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry + in the hostTopNControl table. Each such + entry defines one top N report prepared for + one interface." + ::= { hostTopNControlEntry 1 } + +hostTopNHostIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The host table for which a top N report will be prepared + on behalf of this entry. The host table identified by a + particular value of this index is associated with the same + host table as identified by the same value of + hostIndex. + + This object may not be modified if the associated + hostTopNStatus object is equal to valid(1)." + ::= { hostTopNControlEntry 2 } + +hostTopNRateBase OBJECT-TYPE + SYNTAX INTEGER { + hostTopNInPkts(1), + hostTopNOutPkts(2), + hostTopNInOctets(3), + hostTopNOutOctets(4), + hostTopNOutErrors(5), + hostTopNOutBroadcastPkts(6), + hostTopNOutMulticastPkts(7) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The variable for each host that the hostTopNRate + variable is based upon. + + This object may not be modified if the associated + hostTopNStatus object is equal to valid(1)." + ::= { hostTopNControlEntry 3 } + +hostTopNTimeRemaining OBJECT-TYPE + SYNTAX Integer32 + UNITS "Seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The number of seconds left in the report currently being + collected. When this object is modified by the management + station, a new collection is started, possibly aborting + a currently running report. The new value is used + as the requested duration of this report, which is + loaded into the associated hostTopNDuration object. + + When this object is set to a non-zero value, any + associated hostTopNEntries shall be made + inaccessible by the monitor. While the value of this + object is non-zero, it decrements by one per second until + it reaches zero. During this time, all associated + hostTopNEntries shall remain inaccessible. At the time + that this object decrements to zero, the report is made + accessible in the hostTopNTable. Thus, the hostTopN + table needs to be created only at the end of the collection + interval." + DEFVAL { 0 } + ::= { hostTopNControlEntry 4 } + +hostTopNDuration OBJECT-TYPE + SYNTAX Integer32 + UNITS "Seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of seconds that this report has collected + during the last sampling interval, or if this + report is currently being collected, the number + of seconds that this report is being collected + during this sampling interval. + + When the associated hostTopNTimeRemaining object is set, + this object shall be set by the probe to the same value + and shall not be modified until the next time + the hostTopNTimeRemaining is set. + + This value shall be zero if no reports have been + requested for this hostTopNControlEntry." + DEFVAL { 0 } + ::= { hostTopNControlEntry 5 } + +hostTopNRequestedSize OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum number of hosts requested for the top N + table. + + When this object is created or modified, the probe + should set hostTopNGrantedSize as closely to this + object as is possible for the particular probe + implementation and available resources." + DEFVAL { 10 } + ::= { hostTopNControlEntry 6 } + +hostTopNGrantedSize OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of hosts in the top N table. + + When the associated hostTopNRequestedSize object is + created or modified, the probe should set this + object as closely to the requested value as is possible + for the particular implementation and available + + resources. The probe must not lower this value except + as a result of a set to the associated + hostTopNRequestedSize object. + + Hosts with the highest value of hostTopNRate shall be + placed in this table in decreasing order of this rate + until there is no more room or until there are no more + hosts." + ::= { hostTopNControlEntry 7 } + +hostTopNStartTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this top N report was + last started. In other words, this is the time that + the associated hostTopNTimeRemaining object was + modified to start the requested report." + ::= { hostTopNControlEntry 8 } + +hostTopNOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The entity that configured this entry and is therefore + using the resources assigned to it." + ::= { hostTopNControlEntry 9 } + +hostTopNStatus OBJECT-TYPE + SYNTAX EntryStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this hostTopNControl entry. + + If this object is not equal to valid(1), all associated + hostTopNEntries shall be deleted by the agent." + ::= { hostTopNControlEntry 10 } + +hostTopNTable OBJECT-TYPE + SYNTAX SEQUENCE OF HostTopNEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of top N host entries." + ::= { hostTopN 2 } + +hostTopNEntry OBJECT-TYPE + SYNTAX HostTopNEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A set of statistics for a host that is part of a top N + report. For example, an instance of the hostTopNRate + object might be named hostTopNRate.3.10" + INDEX { hostTopNReport, hostTopNIndex } + ::= { hostTopNTable 1 } + +HostTopNEntry ::= SEQUENCE { + hostTopNReport Integer32, + hostTopNIndex Integer32, + hostTopNAddress OCTET STRING, + hostTopNRate Integer32 +} + +hostTopNReport OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object identifies the top N report of which + this entry is a part. The set of hosts + identified by a particular value of this + object is part of the same report as identified + by the same value of the hostTopNControlIndex object." + ::= { hostTopNEntry 1 } + +hostTopNIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry in + the hostTopN table among those in the same report. + This index is between 1 and N, where N is the + number of entries in this table. Increasing values + of hostTopNIndex shall be assigned to entries with + decreasing values of hostTopNRate until index N + is assigned to the entry with the lowest value of + hostTopNRate or there are no more hostTopNEntries." + ::= { hostTopNEntry 2 } + +hostTopNAddress OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The physical address of this host." + ::= { hostTopNEntry 3 } + +hostTopNRate OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of change in the selected variable + during this sampling interval. The selected + variable is this host's instance of the object + selected by hostTopNRateBase." + ::= { hostTopNEntry 4 } + +-- The Matrix Group + +-- Implementation of the Matrix group is optional. +-- Consult the MODULE-COMPLIANCE macro for the authoritative +-- conformance information for this MIB. +-- +-- The Matrix group consists of the matrixControlTable, matrixSDTable +-- and the matrixDSTable. These tables store statistics for a +-- particular conversation between two addresses. As the device +-- detects a new conversation, including those to a non-unicast +-- address, it creates a new entry in both of the matrix tables. +-- It must only create new entries based on information +-- received in good packets. If the monitoring device finds +-- itself short of resources, it may delete entries as needed. +-- It is suggested that the device delete the least recently used +-- entries first. + +matrixControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF MatrixControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of information entries for the + traffic matrix on each interface." + ::= { matrix 1 } + +matrixControlEntry OBJECT-TYPE + SYNTAX MatrixControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a traffic matrix on a particular + + interface. For example, an instance of the + matrixControlLastDeleteTime object might be named + matrixControlLastDeleteTime.1" + INDEX { matrixControlIndex } + ::= { matrixControlTable 1 } + +MatrixControlEntry ::= SEQUENCE { + matrixControlIndex Integer32, + matrixControlDataSource OBJECT IDENTIFIER, + matrixControlTableSize Integer32, + matrixControlLastDeleteTime TimeTicks, + matrixControlOwner OwnerString, + matrixControlStatus EntryStatus +} + +matrixControlIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry in the + matrixControl table. Each such entry defines + a function that discovers conversations on a particular + interface and places statistics about them in the + matrixSDTable and the matrixDSTable on behalf of this + matrixControlEntry." + ::= { matrixControlEntry 1 } + +matrixControlDataSource OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object identifies the source of + the data from which this entry creates a traffic matrix. + This source can be any interface on this device. In + order to identify a particular interface, this object + shall identify the instance of the ifIndex object, + defined in RFC 2233 [17], for the desired + interface. For example, if an entry were to receive data + from interface #1, this object would be set to ifIndex.1. + + The statistics in this group reflect all packets + on the local network segment attached to the identified + interface. + + An agent may or may not be able to tell if fundamental + changes to the media of the interface have occurred and + + necessitate an invalidation of this entry. For example, a + hot-pluggable ethernet card could be pulled out and replaced + by a token-ring card. In such a case, if the agent has such + knowledge of the change, it is recommended that it + invalidate this entry. + + This object may not be modified if the associated + matrixControlStatus object is equal to valid(1)." + ::= { matrixControlEntry 2 } + +matrixControlTableSize OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of matrixSDEntries in the matrixSDTable + for this interface. This must also be the value of + the number of entries in the matrixDSTable for this + interface." + ::= { matrixControlEntry 3 } + +matrixControlLastDeleteTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the last entry + was deleted from the portion of the matrixSDTable + or matrixDSTable associated with this matrixControlEntry. + If no deletions have occurred, this value shall be + zero." + ::= { matrixControlEntry 4 } + +matrixControlOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The entity that configured this entry and is therefore + using the resources assigned to it." + ::= { matrixControlEntry 5 } + +matrixControlStatus OBJECT-TYPE + SYNTAX EntryStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this matrixControl entry. + + If this object is not equal to valid(1), all associated + entries in the matrixSDTable and the matrixDSTable + shall be deleted by the agent." + ::= { matrixControlEntry 6 } + +matrixSDTable OBJECT-TYPE + SYNTAX SEQUENCE OF MatrixSDEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of traffic matrix entries indexed by + source and destination MAC address." + ::= { matrix 2 } + +matrixSDEntry OBJECT-TYPE + SYNTAX MatrixSDEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A collection of statistics for communications between + two addresses on a particular interface. For example, + an instance of the matrixSDPkts object might be named + matrixSDPkts.1.6.8.0.32.27.3.176.6.8.0.32.10.8.113" + INDEX { matrixSDIndex, + matrixSDSourceAddress, matrixSDDestAddress } + ::= { matrixSDTable 1 } + +MatrixSDEntry ::= SEQUENCE { + matrixSDSourceAddress OCTET STRING, + matrixSDDestAddress OCTET STRING, + matrixSDIndex Integer32, + matrixSDPkts Counter32, + matrixSDOctets Counter32, + matrixSDErrors Counter32 +} + +matrixSDSourceAddress OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The source physical address." + ::= { matrixSDEntry 1 } + +matrixSDDestAddress OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The destination physical address." + ::= { matrixSDEntry 2 } + +matrixSDIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The set of collected matrix statistics of which + this entry is a part. The set of matrix statistics + identified by a particular value of this index + is associated with the same matrixControlEntry + as identified by the same value of matrixControlIndex." + ::= { matrixSDEntry 3 } + +matrixSDPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets transmitted from the source + address to the destination address (this number includes + bad packets)." + ::= { matrixSDEntry 4 } + +matrixSDOctets OBJECT-TYPE + SYNTAX Counter32 + UNITS "Octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of octets (excluding framing bits but + including FCS octets) contained in all packets + transmitted from the source address to the + destination address." + ::= { matrixSDEntry 5 } + +matrixSDErrors OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of bad packets transmitted from + the source address to the destination address." + ::= { matrixSDEntry 6 } + +-- Traffic matrix tables from destination to source + +matrixDSTable OBJECT-TYPE + SYNTAX SEQUENCE OF MatrixDSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of traffic matrix entries indexed by + destination and source MAC address." + ::= { matrix 3 } + +matrixDSEntry OBJECT-TYPE + SYNTAX MatrixDSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A collection of statistics for communications between + two addresses on a particular interface. For example, + an instance of the matrixSDPkts object might be named + matrixSDPkts.1.6.8.0.32.10.8.113.6.8.0.32.27.3.176" + INDEX { matrixDSIndex, + matrixDSDestAddress, matrixDSSourceAddress } + ::= { matrixDSTable 1 } + +MatrixDSEntry ::= SEQUENCE { + matrixDSSourceAddress OCTET STRING, + matrixDSDestAddress OCTET STRING, + matrixDSIndex Integer32, + matrixDSPkts Counter32, + matrixDSOctets Counter32, + matrixDSErrors Counter32 +} + +matrixDSSourceAddress OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The source physical address." + ::= { matrixDSEntry 1 } + +matrixDSDestAddress OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The destination physical address." + ::= { matrixDSEntry 2 } + +matrixDSIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The set of collected matrix statistics of which + this entry is a part. The set of matrix statistics + identified by a particular value of this index + is associated with the same matrixControlEntry + as identified by the same value of matrixControlIndex." + ::= { matrixDSEntry 3 } + +matrixDSPkts OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets transmitted from the source + address to the destination address (this number includes + bad packets)." + ::= { matrixDSEntry 4 } + +matrixDSOctets OBJECT-TYPE + SYNTAX Counter32 + UNITS "Octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of octets (excluding framing bits + but including FCS octets) contained in all packets + transmitted from the source address to the + destination address." + ::= { matrixDSEntry 5 } + +matrixDSErrors OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of bad packets transmitted from + the source address to the destination address." + ::= { matrixDSEntry 6 } + +-- The Filter Group + +-- Implementation of the Filter group is optional. + +-- Consult the MODULE-COMPLIANCE macro for the authoritative +-- conformance information for this MIB. +-- +-- The Filter group allows packets to be captured with an +-- arbitrary filter expression. A logical data and +-- event stream or "channel" is formed by the packets +-- that match the filter expression. +-- +-- This filter mechanism allows the creation of an arbitrary +-- logical expression with which to filter packets. Each +-- filter associated with a channel is OR'ed with the others. +-- Within a filter, any bits checked in the data and status are +-- AND'ed with respect to other bits in the same filter. The +-- NotMask also allows for checking for inequality. Finally, +-- the channelAcceptType object allows for inversion of the +-- whole equation. +-- +-- If a management station wishes to receive a trap to alert it +-- that new packets have been captured and are available for +-- download, it is recommended that it set up an alarm entry that +-- monitors the value of the relevant channelMatches instance. +-- +-- The channel can be turned on or off, and can also +-- generate events when packets pass through it. + +filterTable OBJECT-TYPE + SYNTAX SEQUENCE OF FilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of packet filter entries." + ::= { filter 1 } + +filterEntry OBJECT-TYPE + SYNTAX FilterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A set of parameters for a packet filter applied on a + particular interface. As an example, an instance of the + filterPktData object might be named filterPktData.12" + INDEX { filterIndex } + ::= { filterTable 1 } + +FilterEntry ::= SEQUENCE { + filterIndex Integer32, + filterChannelIndex Integer32, + filterPktDataOffset Integer32, + filterPktData OCTET STRING, + filterPktDataMask OCTET STRING, + filterPktDataNotMask OCTET STRING, + filterPktStatus Integer32, + filterPktStatusMask Integer32, + filterPktStatusNotMask Integer32, + filterOwner OwnerString, + filterStatus EntryStatus +} + +filterIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry + in the filter table. Each such entry defines + one filter that is to be applied to every packet + received on an interface." + ::= { filterEntry 1 } + +filterChannelIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object identifies the channel of which this filter + is a part. The filters identified by a particular value + of this object are associated with the same channel as + identified by the same value of the channelIndex object." + ::= { filterEntry 2 } + +filterPktDataOffset OBJECT-TYPE + SYNTAX Integer32 + UNITS "Octets" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The offset from the beginning of each packet where + a match of packet data will be attempted. This offset + is measured from the point in the physical layer + packet after the framing bits, if any. For example, + in an Ethernet frame, this point is at the beginning of + the destination MAC address. + + This object may not be modified if the associated + filterStatus object is equal to valid(1)." + DEFVAL { 0 } + ::= { filterEntry 3 } + +filterPktData OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The data that is to be matched with the input packet. + For each packet received, this filter and the accompanying + filterPktDataMask and filterPktDataNotMask will be + adjusted for the offset. The only bits relevant to this + match algorithm are those that have the corresponding + filterPktDataMask bit equal to one. The following three + rules are then applied to every packet: + + (1) If the packet is too short and does not have data + corresponding to part of the filterPktData, the packet + will fail this data match. + + (2) For each relevant bit from the packet with the + corresponding filterPktDataNotMask bit set to zero, if + the bit from the packet is not equal to the corresponding + bit from the filterPktData, then the packet will fail + this data match. + + (3) If for every relevant bit from the packet with the + corresponding filterPktDataNotMask bit set to one, the + bit from the packet is equal to the corresponding bit + from the filterPktData, then the packet will fail this + data match. + + Any packets that have not failed any of the three matches + above have passed this data match. In particular, a zero + length filter will match any packet. + + This object may not be modified if the associated + filterStatus object is equal to valid(1)." + ::= { filterEntry 4 } + +filterPktDataMask OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The mask that is applied to the match process. + After adjusting this mask for the offset, only those + bits in the received packet that correspond to bits set + in this mask are relevant for further processing by the + + match algorithm. The offset is applied to filterPktDataMask + in the same way it is applied to the filter. For the + purposes of the matching algorithm, if the associated + filterPktData object is longer than this mask, this mask is + conceptually extended with '1' bits until it reaches the + length of the filterPktData object. + + This object may not be modified if the associated + filterStatus object is equal to valid(1)." + ::= { filterEntry 5 } + +filterPktDataNotMask OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The inversion mask that is applied to the match + process. After adjusting this mask for the offset, + those relevant bits in the received packet that correspond + to bits cleared in this mask must all be equal to their + corresponding bits in the filterPktData object for the packet + to be accepted. In addition, at least one of those relevant + bits in the received packet that correspond to bits set in + this mask must be different to its corresponding bit in the + filterPktData object. + + For the purposes of the matching algorithm, if the associated + filterPktData object is longer than this mask, this mask is + conceptually extended with '0' bits until it reaches the + length of the filterPktData object. + + This object may not be modified if the associated + filterStatus object is equal to valid(1)." + ::= { filterEntry 6 } + +filterPktStatus OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status that is to be matched with the input packet. + The only bits relevant to this match algorithm are those that + have the corresponding filterPktStatusMask bit equal to one. + The following two rules are then applied to every packet: + + (1) For each relevant bit from the packet status with the + corresponding filterPktStatusNotMask bit set to zero, if + the bit from the packet status is not equal to the + + corresponding bit from the filterPktStatus, then the + packet will fail this status match. + + (2) If for every relevant bit from the packet status with the + corresponding filterPktStatusNotMask bit set to one, the + bit from the packet status is equal to the corresponding + bit from the filterPktStatus, then the packet will fail + this status match. + + Any packets that have not failed either of the two matches + above have passed this status match. In particular, a zero + length status filter will match any packet's status. + + The value of the packet status is a sum. This sum + initially takes the value zero. Then, for each + error, E, that has been discovered in this packet, + 2 raised to a value representing E is added to the sum. + The errors and the bits that represent them are dependent + on the media type of the interface that this channel + is receiving packets from. + + The errors defined for a packet captured off of an + Ethernet interface are as follows: + + bit # Error + 0 Packet is longer than 1518 octets + 1 Packet is shorter than 64 octets + 2 Packet experienced a CRC or Alignment error + + For example, an Ethernet fragment would have a + value of 6 (2^1 + 2^2). + + As this MIB is expanded to new media types, this object + will have other media-specific errors defined. + + For the purposes of this status matching algorithm, if the + packet status is longer than this filterPktStatus object, + this object is conceptually extended with '0' bits until it + reaches the size of the packet status. + + This object may not be modified if the associated + filterStatus object is equal to valid(1)." + ::= { filterEntry 7 } + +filterPktStatusMask OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The mask that is applied to the status match process. + Only those bits in the received packet that correspond to + bits set in this mask are relevant for further processing + by the status match algorithm. For the purposes + of the matching algorithm, if the associated filterPktStatus + object is longer than this mask, this mask is conceptually + extended with '1' bits until it reaches the size of the + filterPktStatus. In addition, if a packet status is longer + than this mask, this mask is conceptually extended with '0' + bits until it reaches the size of the packet status. + + This object may not be modified if the associated + filterStatus object is equal to valid(1)." + ::= { filterEntry 8 } + +filterPktStatusNotMask OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The inversion mask that is applied to the status match + process. Those relevant bits in the received packet status + that correspond to bits cleared in this mask must all be + equal to their corresponding bits in the filterPktStatus + object for the packet to be accepted. In addition, at least + one of those relevant bits in the received packet status + that correspond to bits set in this mask must be different + to its corresponding bit in the filterPktStatus object for + the packet to be accepted. + + For the purposes of the matching algorithm, if the associated + filterPktStatus object or a packet status is longer than this + mask, this mask is conceptually extended with '0' bits until + it reaches the longer of the lengths of the filterPktStatus + object and the packet status. + + This object may not be modified if the associated + filterStatus object is equal to valid(1)." + ::= { filterEntry 9 } + +filterOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The entity that configured this entry and is therefore + using the resources assigned to it." + ::= { filterEntry 10 } + +filterStatus OBJECT-TYPE + SYNTAX EntryStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this filter entry." + ::= { filterEntry 11 } + +channelTable OBJECT-TYPE + SYNTAX SEQUENCE OF ChannelEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of packet channel entries." + ::= { filter 2 } + +channelEntry OBJECT-TYPE + SYNTAX ChannelEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A set of parameters for a packet channel applied on a + particular interface. As an example, an instance of the + channelMatches object might be named channelMatches.3" + INDEX { channelIndex } + ::= { channelTable 1 } + +ChannelEntry ::= SEQUENCE { + channelIndex Integer32, + channelIfIndex Integer32, + channelAcceptType INTEGER, + channelDataControl INTEGER, + channelTurnOnEventIndex Integer32, + channelTurnOffEventIndex Integer32, + channelEventIndex Integer32, + channelEventStatus INTEGER, + channelMatches Counter32, + channelDescription DisplayString, + channelOwner OwnerString, + channelStatus EntryStatus +} + +channelIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry in the channel + table. Each such entry defines one channel, a logical + data and event stream. + + It is suggested that before creating a channel, an + application should scan all instances of the + filterChannelIndex object to make sure that there are no + pre-existing filters that would be inadvertently be linked + to the channel." + ::= { channelEntry 1 } + +channelIfIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object uniquely identifies the + interface on this remote network monitoring device to which + the associated filters are applied to allow data into this + channel. The interface identified by a particular value + of this object is the same interface as identified by the + same value of the ifIndex object, defined in RFC 2233 [17]. + + The filters in this group are applied to all packets on + the local network segment attached to the identified + interface. + + An agent may or may not be able to tell if fundamental + changes to the media of the interface have occurred and + necessitate an invalidation of this entry. For example, a + hot-pluggable ethernet card could be pulled out and replaced + by a token-ring card. In such a case, if the agent has such + knowledge of the change, it is recommended that it + invalidate this entry. + + This object may not be modified if the associated + channelStatus object is equal to valid(1)." + ::= { channelEntry 2 } + +channelAcceptType OBJECT-TYPE + SYNTAX INTEGER { + acceptMatched(1), + acceptFailed(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object controls the action of the filters + associated with this channel. If this object is equal + to acceptMatched(1), packets will be accepted to this + channel if they are accepted by both the packet data and + packet status matches of an associated filter. If + this object is equal to acceptFailed(2), packets will + be accepted to this channel only if they fail either + the packet data match or the packet status match of + each of the associated filters. + + In particular, a channel with no associated filters will + match no packets if set to acceptMatched(1) case and will + match all packets in the acceptFailed(2) case. + + This object may not be modified if the associated + channelStatus object is equal to valid(1)." + ::= { channelEntry 3 } + +channelDataControl OBJECT-TYPE + SYNTAX INTEGER { + on(1), + off(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object controls the flow of data through this channel. + If this object is on(1), data, status and events flow + through this channel. If this object is off(2), data, + status and events will not flow through this channel." + DEFVAL { off } + ::= { channelEntry 4 } + +channelTurnOnEventIndex OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object identifies the event + that is configured to turn the associated + channelDataControl from off to on when the event is + generated. The event identified by a particular value + of this object is the same event as identified by the + same value of the eventIndex object. If there is no + corresponding entry in the eventTable, then no + association exists. In fact, if no event is intended + for this channel, channelTurnOnEventIndex must be + set to zero, a non-existent event index. + + This object may not be modified if the associated + channelStatus object is equal to valid(1)." + ::= { channelEntry 5 } + +channelTurnOffEventIndex OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object identifies the event + that is configured to turn the associated + channelDataControl from on to off when the event is + generated. The event identified by a particular value + of this object is the same event as identified by the + same value of the eventIndex object. If there is no + corresponding entry in the eventTable, then no + association exists. In fact, if no event is intended + for this channel, channelTurnOffEventIndex must be + set to zero, a non-existent event index. + + This object may not be modified if the associated + channelStatus object is equal to valid(1)." + ::= { channelEntry 6 } + +channelEventIndex OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object identifies the event + that is configured to be generated when the + associated channelDataControl is on and a packet + is matched. The event identified by a particular value + of this object is the same event as identified by the + same value of the eventIndex object. If there is no + corresponding entry in the eventTable, then no + association exists. In fact, if no event is intended + for this channel, channelEventIndex must be + set to zero, a non-existent event index. + + This object may not be modified if the associated + channelStatus object is equal to valid(1)." + ::= { channelEntry 7 } + +channelEventStatus OBJECT-TYPE + SYNTAX INTEGER { + eventReady(1), + eventFired(2), + eventAlwaysReady(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The event status of this channel. + + If this channel is configured to generate events + when packets are matched, a means of controlling + the flow of those events is often needed. When + this object is equal to eventReady(1), a single + event may be generated, after which this object + will be set by the probe to eventFired(2). While + in the eventFired(2) state, no events will be + generated until the object is modified to + eventReady(1) (or eventAlwaysReady(3)). The + management station can thus easily respond to a + notification of an event by re-enabling this object. + + If the management station wishes to disable this + flow control and allow events to be generated + at will, this object may be set to + eventAlwaysReady(3). Disabling the flow control + is discouraged as it can result in high network + traffic or other performance problems." + DEFVAL { eventReady } + ::= { channelEntry 8 } + +channelMatches OBJECT-TYPE + SYNTAX Counter32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this channel has matched a packet. + Note that this object is updated even when + channelDataControl is set to off." + ::= { channelEntry 9 } + +channelDescription OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..127)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A comment describing this channel." + ::= { channelEntry 10 } + +channelOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The entity that configured this entry and is therefore + using the resources assigned to it." + ::= { channelEntry 11 } + +channelStatus OBJECT-TYPE + SYNTAX EntryStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this channel entry." + ::= { channelEntry 12 } + +-- The Packet Capture Group + +-- Implementation of the Packet Capture group is optional. The Packet +-- Capture Group requires implementation of the Filter Group. +-- Consult the MODULE-COMPLIANCE macro for the authoritative +-- conformance information for this MIB. +-- +-- The Packet Capture group allows packets to be captured +-- upon a filter match. The bufferControlTable controls +-- the captured packets output from a channel that is +-- associated with it. The captured packets are placed +-- in entries in the captureBufferTable. These entries are +-- associated with the bufferControlEntry on whose behalf they +-- were stored. + +bufferControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF BufferControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of buffers control entries." + ::= { capture 1 } + +bufferControlEntry OBJECT-TYPE + SYNTAX BufferControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A set of parameters that control the collection of a stream + of packets that have matched filters. As an example, an + instance of the bufferControlCaptureSliceSize object might + be named bufferControlCaptureSliceSize.3" + INDEX { bufferControlIndex } + ::= { bufferControlTable 1 } + +BufferControlEntry ::= SEQUENCE { + bufferControlIndex Integer32, + bufferControlChannelIndex Integer32, + bufferControlFullStatus INTEGER, + bufferControlFullAction INTEGER, + bufferControlCaptureSliceSize Integer32, + bufferControlDownloadSliceSize Integer32, + bufferControlDownloadOffset Integer32, + bufferControlMaxOctetsRequested Integer32, + bufferControlMaxOctetsGranted Integer32, + bufferControlCapturedPackets Integer32, + bufferControlTurnOnTime TimeTicks, + bufferControlOwner OwnerString, + bufferControlStatus EntryStatus +} + +bufferControlIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry + in the bufferControl table. The value of this + index shall never be zero. Each such + entry defines one set of packets that is + captured and controlled by one or more filters." + ::= { bufferControlEntry 1 } + +bufferControlChannelIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An index that identifies the channel that is the + source of packets for this bufferControl table. + The channel identified by a particular value of this + index is the same as identified by the same value of + the channelIndex object. + + This object may not be modified if the associated + bufferControlStatus object is equal to valid(1)." + ::= { bufferControlEntry 2 } + +bufferControlFullStatus OBJECT-TYPE + SYNTAX INTEGER { + + spaceAvailable(1), + full(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object shows whether the buffer has room to + accept new packets or if it is full. + + If the status is spaceAvailable(1), the buffer is + accepting new packets normally. If the status is + full(2) and the associated bufferControlFullAction + object is wrapWhenFull, the buffer is accepting new + packets by deleting enough of the oldest packets + to make room for new ones as they arrive. Otherwise, + if the status is full(2) and the + bufferControlFullAction object is lockWhenFull, + then the buffer has stopped collecting packets. + + When this object is set to full(2) the probe must + not later set it to spaceAvailable(1) except in the + case of a significant gain in resources such as + an increase of bufferControlOctetsGranted. In + particular, the wrap-mode action of deleting old + packets to make room for newly arrived packets + must not affect the value of this object." + ::= { bufferControlEntry 3 } + +bufferControlFullAction OBJECT-TYPE + SYNTAX INTEGER { + lockWhenFull(1), + wrapWhenFull(2) -- FIFO + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls the action of the buffer when it + reaches the full status. When in the lockWhenFull(1) + state and a packet is added to the buffer that + fills the buffer, the bufferControlFullStatus will + be set to full(2) and this buffer will stop capturing + packets." + ::= { bufferControlEntry 4 } + +bufferControlCaptureSliceSize OBJECT-TYPE + SYNTAX Integer32 + UNITS "Octets" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum number of octets of each packet + that will be saved in this capture buffer. + For example, if a 1500 octet packet is received by + the probe and this object is set to 500, then only + 500 octets of the packet will be stored in the + associated capture buffer. If this variable is set + to 0, the capture buffer will save as many octets + as is possible. + + This object may not be modified if the associated + bufferControlStatus object is equal to valid(1)." + DEFVAL { 100 } + ::= { bufferControlEntry 5 } + +bufferControlDownloadSliceSize OBJECT-TYPE + SYNTAX Integer32 + UNITS "Octets" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum number of octets of each packet + in this capture buffer that will be returned in + an SNMP retrieval of that packet. For example, + if 500 octets of a packet have been stored in the + associated capture buffer, the associated + bufferControlDownloadOffset is 0, and this + object is set to 100, then the captureBufferPacket + object that contains the packet will contain only + the first 100 octets of the packet. + + A prudent manager will take into account possible + interoperability or fragmentation problems that may + occur if the download slice size is set too large. + In particular, conformant SNMP implementations are not + required to accept messages whose length exceeds 484 + octets, although they are encouraged to support larger + datagrams whenever feasible." + DEFVAL { 100 } + ::= { bufferControlEntry 6 } + +bufferControlDownloadOffset OBJECT-TYPE + SYNTAX Integer32 + UNITS "Octets" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The offset of the first octet of each packet + in this capture buffer that will be returned in + an SNMP retrieval of that packet. For example, + if 500 octets of a packet have been stored in the + associated capture buffer and this object is set to + 100, then the captureBufferPacket object that + contains the packet will contain bytes starting + 100 octets into the packet." + DEFVAL { 0 } + ::= { bufferControlEntry 7 } + +bufferControlMaxOctetsRequested OBJECT-TYPE + SYNTAX Integer32 + UNITS "Octets" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The requested maximum number of octets to be + saved in this captureBuffer, including any + implementation-specific overhead. If this variable + is set to -1, the capture buffer will save as many + octets as is possible. + + When this object is created or modified, the probe + should set bufferControlMaxOctetsGranted as closely + to this object as is possible for the particular probe + implementation and available resources. However, if + the object has the special value of -1, the probe + must set bufferControlMaxOctetsGranted to -1." + DEFVAL { -1 } + ::= { bufferControlEntry 8 } + +bufferControlMaxOctetsGranted OBJECT-TYPE + SYNTAX Integer32 + UNITS "Octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of octets that can be + saved in this captureBuffer, including overhead. + If this variable is -1, the capture buffer will save + as many octets as possible. + + When the bufferControlMaxOctetsRequested object is + created or modified, the probe should set this object + as closely to the requested value as is possible for the + particular probe implementation and available resources. + However, if the request object has the special value + + of -1, the probe must set this object to -1. + + The probe must not lower this value except as a result of + a modification to the associated + bufferControlMaxOctetsRequested object. + + When this maximum number of octets is reached + and a new packet is to be added to this + capture buffer and the corresponding + bufferControlFullAction is set to wrapWhenFull(2), + enough of the oldest packets associated with this + capture buffer shall be deleted by the agent so + that the new packet can be added. If the corresponding + bufferControlFullAction is set to lockWhenFull(1), + the new packet shall be discarded. In either case, + the probe must set bufferControlFullStatus to + full(2). + + When the value of this object changes to a value less + than the current value, entries are deleted from + the captureBufferTable associated with this + bufferControlEntry. Enough of the + oldest of these captureBufferEntries shall be + deleted by the agent so that the number of octets + used remains less than or equal to the new value of + this object. + + When the value of this object changes to a value greater + than the current value, the number of associated + captureBufferEntries may be allowed to grow." + ::= { bufferControlEntry 9 } + +bufferControlCapturedPackets OBJECT-TYPE + SYNTAX Integer32 + UNITS "Packets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of packets currently in this captureBuffer." + ::= { bufferControlEntry 10 } + +bufferControlTurnOnTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this capture buffer was + first turned on." + ::= { bufferControlEntry 11 } + +bufferControlOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The entity that configured this entry and is therefore + using the resources assigned to it." + ::= { bufferControlEntry 12 } + +bufferControlStatus OBJECT-TYPE + SYNTAX EntryStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this buffer Control Entry." + ::= { bufferControlEntry 13 } + +captureBufferTable OBJECT-TYPE + SYNTAX SEQUENCE OF CaptureBufferEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of packets captured off of a channel." + ::= { capture 2 } + +captureBufferEntry OBJECT-TYPE + SYNTAX CaptureBufferEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A packet captured off of an attached network. As an + example, an instance of the captureBufferPacketData + object might be named captureBufferPacketData.3.1783" + INDEX { captureBufferControlIndex, captureBufferIndex } + ::= { captureBufferTable 1 } + +CaptureBufferEntry ::= SEQUENCE { + captureBufferControlIndex Integer32, + captureBufferIndex Integer32, + captureBufferPacketID Integer32, + captureBufferPacketData OCTET STRING, + captureBufferPacketLength Integer32, + captureBufferPacketTime Integer32, + captureBufferPacketStatus Integer32 +} + +captureBufferControlIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of the bufferControlEntry with which + this packet is associated." + ::= { captureBufferEntry 1 } + +captureBufferIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry + in the captureBuffer table associated with a + particular bufferControlEntry. This index will + start at 1 and increase by one for each new packet + added with the same captureBufferControlIndex. + + Should this value reach 2147483647, the next packet + added with the same captureBufferControlIndex shall + cause this value to wrap around to 1." + ::= { captureBufferEntry 2 } + +captureBufferPacketID OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that describes the order of packets + that are received on a particular interface. + The packetID of a packet captured on an + interface is defined to be greater than the + packetID's of all packets captured previously on + the same interface. As the captureBufferPacketID + object has a maximum positive value of 2^31 - 1, + any captureBufferPacketID object shall have the + value of the associated packet's packetID mod 2^31." + ::= { captureBufferEntry 3 } + +captureBufferPacketData OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The data inside the packet, starting at the beginning + of the packet plus any offset specified in the + + associated bufferControlDownloadOffset, including any + link level headers. The length of the data in this object + is the minimum of the length of the captured packet minus + the offset, the length of the associated + bufferControlCaptureSliceSize minus the offset, and the + associated bufferControlDownloadSliceSize. If this minimum + is less than zero, this object shall have a length of zero." + ::= { captureBufferEntry 4 } + +captureBufferPacketLength OBJECT-TYPE + SYNTAX Integer32 + UNITS "Octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The actual length (off the wire) of the packet stored + in this entry, including FCS octets." + ::= { captureBufferEntry 5 } + +captureBufferPacketTime OBJECT-TYPE + SYNTAX Integer32 + UNITS "Milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of milliseconds that had passed since + this capture buffer was first turned on when this + packet was captured." + ::= { captureBufferEntry 6 } + +captureBufferPacketStatus OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A value which indicates the error status of this packet. + + The value of this object is defined in the same way as + filterPktStatus. The value is a sum. This sum + initially takes the value zero. Then, for each + error, E, that has been discovered in this packet, + 2 raised to a value representing E is added to the sum. + + The errors defined for a packet captured off of an + Ethernet interface are as follows: + + bit # Error + 0 Packet is longer than 1518 octets + + 1 Packet is shorter than 64 octets + 2 Packet experienced a CRC or Alignment error + 3 First packet in this capture buffer after + it was detected that some packets were + not processed correctly. + 4 Packet's order in buffer is only approximate + (May only be set for packets sent from + the probe) + + For example, an Ethernet fragment would have a + value of 6 (2^1 + 2^2). + + As this MIB is expanded to new media types, this object + will have other media-specific errors defined." + ::= { captureBufferEntry 7 } + +-- The Event Group + +-- Implementation of the Event group is optional. +-- Consult the MODULE-COMPLIANCE macro for the authoritative +-- conformance information for this MIB. +-- +-- The Event group controls the generation and notification +-- of events from this device. Each entry in the eventTable +-- describes the parameters of the event that can be triggered. +-- Each event entry is fired by an associated condition located +-- elsewhere in the MIB. An event entry may also be associated +-- with a function elsewhere in the MIB that will be executed +-- when the event is generated. For example, a channel may +-- be turned on or off by the firing of an event. +-- +-- Each eventEntry may optionally specify that a log entry +-- be created on its behalf whenever the event occurs. +-- Each entry may also specify that notification should +-- occur by way of SNMP trap messages. In this case, the +-- community for the trap message is given in the associated +-- eventCommunity object. The enterprise and specific trap +-- fields of the trap are determined by the condition that +-- triggered the event. Two traps are defined: risingAlarm and +-- fallingAlarm. If the eventTable is triggered by a condition +-- specified elsewhere, the enterprise and specific trap fields +-- must be specified for traps generated for that condition. + +eventTable OBJECT-TYPE + SYNTAX SEQUENCE OF EventEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of events to be generated." + ::= { event 1 } + +eventEntry OBJECT-TYPE + SYNTAX EventEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A set of parameters that describe an event to be generated + when certain conditions are met. As an example, an instance + of the eventLastTimeSent object might be named + eventLastTimeSent.6" + INDEX { eventIndex } + ::= { eventTable 1 } + +EventEntry ::= SEQUENCE { + eventIndex Integer32, + eventDescription DisplayString, + eventType INTEGER, + eventCommunity OCTET STRING, + eventLastTimeSent TimeTicks, + eventOwner OwnerString, + eventStatus EntryStatus +} + +eventIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry in the + event table. Each such entry defines one event that + is to be generated when the appropriate conditions + occur." + ::= { eventEntry 1 } + +eventDescription OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..127)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A comment describing this event entry." + ::= { eventEntry 2 } + +eventType OBJECT-TYPE + SYNTAX INTEGER { + none(1), + log(2), + snmptrap(3), -- send an SNMP trap + logandtrap(4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of notification that the probe will make + about this event. In the case of log, an entry is + made in the log table for each event. In the case of + snmp-trap, an SNMP trap is sent to one or more + management stations." + ::= { eventEntry 3 } + +eventCommunity OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..127)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If an SNMP trap is to be sent, it will be sent to + the SNMP community specified by this octet string." + ::= { eventEntry 4 } + +eventLastTimeSent OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time this event + entry last generated an event. If this entry has + not generated any events, this value will be + zero." + ::= { eventEntry 5 } + +eventOwner OBJECT-TYPE + SYNTAX OwnerString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The entity that configured this entry and is therefore + using the resources assigned to it. + + If this object contains a string starting with 'monitor' + and has associated entries in the log table, all connected + management stations should retrieve those log entries, + as they may have significance to all management stations + connected to this device" + ::= { eventEntry 6 } + +eventStatus OBJECT-TYPE + SYNTAX EntryStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this event entry. + + If this object is not equal to valid(1), all associated + log entries shall be deleted by the agent." + ::= { eventEntry 7 } + +-- +logTable OBJECT-TYPE + SYNTAX SEQUENCE OF LogEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of events that have been logged." + ::= { event 2 } + +logEntry OBJECT-TYPE + SYNTAX LogEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A set of data describing an event that has been + logged. For example, an instance of the logDescription + object might be named logDescription.6.47" + INDEX { logEventIndex, logIndex } + ::= { logTable 1 } + +LogEntry ::= SEQUENCE { + logEventIndex Integer32, + logIndex Integer32, + logTime TimeTicks, + logDescription DisplayString +} + +logEventIndex OBJECT-TYPE + SYNTAX Integer32 (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The event entry that generated this log + entry. The log identified by a particular + value of this index is associated with the same + eventEntry as identified by the same value + of eventIndex." + ::= { logEntry 1 } + +logIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry + in the log table amongst those generated by the + same eventEntries. These indexes are + assigned beginning with 1 and increase by one + with each new log entry. The association + between values of logIndex and logEntries + is fixed for the lifetime of each logEntry. + The agent may choose to delete the oldest + instances of logEntry as required because of + lack of memory. It is an implementation-specific + matter as to when this deletion may occur." + ::= { logEntry 2 } + +logTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this log entry was created." + ::= { logEntry 3 } + +logDescription OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An implementation dependent description of the + event that activated this log entry." + ::= { logEntry 4 } + +-- Remote Network Monitoring Traps + +rmonEventsV2 OBJECT-IDENTITY + STATUS current + DESCRIPTION "Definition point for RMON notifications." + ::= { rmon 0 } + +risingAlarm NOTIFICATION-TYPE + OBJECTS { alarmIndex, alarmVariable, alarmSampleType, + alarmValue, alarmRisingThreshold } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when an alarm + entry crosses its rising threshold and generates + an event that is configured for sending SNMP + traps." + ::= { rmonEventsV2 1 } + +fallingAlarm NOTIFICATION-TYPE + OBJECTS { alarmIndex, alarmVariable, alarmSampleType, + alarmValue, alarmFallingThreshold } + STATUS current + DESCRIPTION + "The SNMP trap that is generated when an alarm + entry crosses its falling threshold and generates + an event that is configured for sending SNMP + traps." + ::= { rmonEventsV2 2 } + +-- Conformance information + +rmonCompliances OBJECT IDENTIFIER ::= { rmonConformance 9 } +rmonGroups OBJECT IDENTIFIER ::= { rmonConformance 10 } + +-- Compliance Statements +rmonCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The requirements for conformance to the RMON MIB. At least + one of the groups in this module must be implemented to + conform to the RMON MIB. Implementations of this MIB + must also implement the system group of MIB-II [16] and the + IF-MIB [17]." + MODULE -- this module + + GROUP rmonEtherStatsGroup + DESCRIPTION + "The RMON Ethernet Statistics Group is optional." + + GROUP rmonHistoryControlGroup + DESCRIPTION + "The RMON History Control Group is optional." + + GROUP rmonEthernetHistoryGroup + DESCRIPTION + "The RMON Ethernet History Group is optional." + + GROUP rmonAlarmGroup + DESCRIPTION + "The RMON Alarm Group is optional." + + GROUP rmonHostGroup + DESCRIPTION + "The RMON Host Group is mandatory when the + rmonHostTopNGroup is implemented." + + GROUP rmonHostTopNGroup + DESCRIPTION + "The RMON Host Top N Group is optional." + + GROUP rmonMatrixGroup + DESCRIPTION + "The RMON Matrix Group is optional." + + GROUP rmonFilterGroup + DESCRIPTION + "The RMON Filter Group is mandatory when the + rmonPacketCaptureGroup is implemented." + + GROUP rmonPacketCaptureGroup + DESCRIPTION + "The RMON Packet Capture Group is optional." + + GROUP rmonEventGroup + DESCRIPTION + "The RMON Event Group is mandatory when the + rmonAlarmGroup is implemented." + ::= { rmonCompliances 1 } + + rmonEtherStatsGroup OBJECT-GROUP + OBJECTS { + etherStatsIndex, etherStatsDataSource, + etherStatsDropEvents, etherStatsOctets, etherStatsPkts, + etherStatsBroadcastPkts, etherStatsMulticastPkts, + etherStatsCRCAlignErrors, etherStatsUndersizePkts, + etherStatsOversizePkts, etherStatsFragments, + etherStatsJabbers, etherStatsCollisions, + etherStatsPkts64Octets, etherStatsPkts65to127Octets, + etherStatsPkts128to255Octets, + etherStatsPkts256to511Octets, + etherStatsPkts512to1023Octets, + etherStatsPkts1024to1518Octets, + etherStatsOwner, etherStatsStatus + } + STATUS current + DESCRIPTION + "The RMON Ethernet Statistics Group." + ::= { rmonGroups 1 } + + rmonHistoryControlGroup OBJECT-GROUP + OBJECTS { + historyControlIndex, historyControlDataSource, + historyControlBucketsRequested, + historyControlBucketsGranted, historyControlInterval, + historyControlOwner, historyControlStatus + } + STATUS current + DESCRIPTION + "The RMON History Control Group." + ::= { rmonGroups 2 } + + rmonEthernetHistoryGroup OBJECT-GROUP + OBJECTS { + etherHistoryIndex, etherHistorySampleIndex, + etherHistoryIntervalStart, etherHistoryDropEvents, + etherHistoryOctets, etherHistoryPkts, + etherHistoryBroadcastPkts, etherHistoryMulticastPkts, + etherHistoryCRCAlignErrors, etherHistoryUndersizePkts, + etherHistoryOversizePkts, etherHistoryFragments, + etherHistoryJabbers, etherHistoryCollisions, + etherHistoryUtilization + } + STATUS current + DESCRIPTION + "The RMON Ethernet History Group." + ::= { rmonGroups 3 } + + rmonAlarmGroup OBJECT-GROUP + OBJECTS { + alarmIndex, alarmInterval, alarmVariable, + alarmSampleType, alarmValue, alarmStartupAlarm, + alarmRisingThreshold, alarmFallingThreshold, + alarmRisingEventIndex, alarmFallingEventIndex, + alarmOwner, alarmStatus + } + STATUS current + DESCRIPTION + "The RMON Alarm Group." + ::= { rmonGroups 4 } + + rmonHostGroup OBJECT-GROUP + OBJECTS { + hostControlIndex, hostControlDataSource, + hostControlTableSize, hostControlLastDeleteTime, + hostControlOwner, hostControlStatus, + hostAddress, hostCreationOrder, hostIndex, + hostInPkts, hostOutPkts, hostInOctets, + hostOutOctets, hostOutErrors, hostOutBroadcastPkts, + hostOutMulticastPkts, hostTimeAddress, + hostTimeCreationOrder, hostTimeIndex, + hostTimeInPkts, hostTimeOutPkts, hostTimeInOctets, + hostTimeOutOctets, hostTimeOutErrors, + hostTimeOutBroadcastPkts, hostTimeOutMulticastPkts + } + STATUS current + DESCRIPTION + "The RMON Host Group." + ::= { rmonGroups 5 } + + rmonHostTopNGroup OBJECT-GROUP + OBJECTS { + hostTopNControlIndex, hostTopNHostIndex, + hostTopNRateBase, hostTopNTimeRemaining, + hostTopNDuration, hostTopNRequestedSize, + hostTopNGrantedSize, hostTopNStartTime, + hostTopNOwner, hostTopNStatus, + hostTopNReport, hostTopNIndex, + hostTopNAddress, hostTopNRate + } + STATUS current + DESCRIPTION + "The RMON Host Top 'N' Group." + ::= { rmonGroups 6 } + + rmonMatrixGroup OBJECT-GROUP + OBJECTS { + matrixControlIndex, matrixControlDataSource, + matrixControlTableSize, matrixControlLastDeleteTime, + matrixControlOwner, matrixControlStatus, + matrixSDSourceAddress, matrixSDDestAddress, + matrixSDIndex, matrixSDPkts, + matrixSDOctets, matrixSDErrors, + matrixDSSourceAddress, matrixDSDestAddress, + matrixDSIndex, matrixDSPkts, + matrixDSOctets, matrixDSErrors + } + STATUS current + DESCRIPTION + "The RMON Matrix Group." + ::= { rmonGroups 7 } + + rmonFilterGroup OBJECT-GROUP + OBJECTS { + + filterIndex, filterChannelIndex, filterPktDataOffset, + filterPktData, filterPktDataMask, + filterPktDataNotMask, filterPktStatus, + filterPktStatusMask, filterPktStatusNotMask, + filterOwner, filterStatus, + channelIndex, channelIfIndex, channelAcceptType, + channelDataControl, channelTurnOnEventIndex, + channelTurnOffEventIndex, channelEventIndex, + channelEventStatus, channelMatches, + channelDescription, channelOwner, channelStatus + } + STATUS current + DESCRIPTION + "The RMON Filter Group." + ::= { rmonGroups 8 } + + rmonPacketCaptureGroup OBJECT-GROUP + OBJECTS { + bufferControlIndex, bufferControlChannelIndex, + bufferControlFullStatus, bufferControlFullAction, + bufferControlCaptureSliceSize, + bufferControlDownloadSliceSize, + bufferControlDownloadOffset, + bufferControlMaxOctetsRequested, + bufferControlMaxOctetsGranted, + bufferControlCapturedPackets, + bufferControlTurnOnTime, + bufferControlOwner, bufferControlStatus, + captureBufferControlIndex, captureBufferIndex, + captureBufferPacketID, captureBufferPacketData, + captureBufferPacketLength, captureBufferPacketTime, + captureBufferPacketStatus + } + STATUS current + DESCRIPTION + "The RMON Packet Capture Group." + ::= { rmonGroups 9 } + + rmonEventGroup OBJECT-GROUP + OBJECTS { + eventIndex, eventDescription, eventType, + eventCommunity, eventLastTimeSent, + eventOwner, eventStatus, + logEventIndex, logIndex, logTime, + logDescription + } + STATUS current + DESCRIPTION + "The RMON Event Group." + ::= { rmonGroups 10 } + + rmonNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { risingAlarm, fallingAlarm } + STATUS current + DESCRIPTION + "The RMON Notification Group." + ::= { rmonGroups 11 } +END |