diff options
Diffstat (limited to 'smoketest/scripts/cli/test_interfaces_wireless.py')
| -rwxr-xr-x | smoketest/scripts/cli/test_interfaces_wireless.py | 259 |
1 files changed, 255 insertions, 4 deletions
diff --git a/smoketest/scripts/cli/test_interfaces_wireless.py b/smoketest/scripts/cli/test_interfaces_wireless.py index b45754cae..f7e0b2ede 100755 --- a/smoketest/scripts/cli/test_interfaces_wireless.py +++ b/smoketest/scripts/cli/test_interfaces_wireless.py @@ -54,6 +54,11 @@ class WirelessInterfaceTest(BasicInterfaceTest.TestCase): cls._test_ipv6 = False cls._test_vlan = False +<<<<<<< HEAD +======= + cls.cli_set(cls, wifi_cc_path + ['se']) + +>>>>>>> d5e988ba2 (wireless: T6320: add 802.11ax at 6GHz) def test_wireless_add_single_ip_address(self): # derived method to check if member interfaces are enslaved properly super().test_add_single_ip_address() @@ -70,7 +75,7 @@ class WirelessInterfaceTest(BasicInterfaceTest.TestCase): def test_wireless_hostapd_config(self): # Only set the hostapd (access-point) options - interface = 'wlan0' + interface = 'wlan1' ssid = 'ssid' self.cli_set(self._base_path + [interface, 'ssid', ssid]) @@ -146,9 +151,237 @@ class WirelessInterfaceTest(BasicInterfaceTest.TestCase): # Check for running process self.assertTrue(process_named_running('hostapd')) +<<<<<<< HEAD +======= + def test_wireless_hostapd_vht_mu_beamformer_config(self): + # Multi-User-Beamformer + interface = 'wlan1' + ssid = 'vht_mu-beamformer' + antennas = '3' + + self.cli_set(self._base_path + [interface, 'ssid', ssid]) + self.cli_set(self._base_path + [interface, 'type', 'access-point']) + self.cli_set(self._base_path + [interface, 'channel', '36']) + + ht_opt = { + # VyOS CLI option hostapd - ht_capab setting + 'channel-set-width ht20' : '[HT20]', + 'channel-set-width ht40-' : '[HT40-]', + 'channel-set-width ht40+' : '[HT40+]', + 'dsss-cck-40' : '[DSSS_CCK-40]', + 'short-gi 20' : '[SHORT-GI-20]', + 'short-gi 40' : '[SHORT-GI-40]', + 'max-amsdu 7935' : '[MAX-AMSDU-7935]', + } + for key in ht_opt: + self.cli_set(self._base_path + [interface, 'capabilities', 'ht'] + key.split()) + + vht_opt = { + # VyOS CLI option hostapd - ht_capab setting + 'max-mpdu 11454' : '[MAX-MPDU-11454]', + 'max-mpdu-exp 2' : '[MAX-A-MPDU-LEN-EXP-2]', + 'stbc tx' : '[TX-STBC-2BY1]', + 'stbc rx 12' : '[RX-STBC-12]', + 'ldpc' : '[RXLDPC]', + 'tx-powersave' : '[VHT-TXOP-PS]', + 'vht-cf' : '[HTC-VHT]', + 'antenna-pattern-fixed' : '[RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN]', + 'link-adaptation both' : '[VHT-LINK-ADAPT3]', + 'short-gi 80' : '[SHORT-GI-80]', + 'short-gi 160' : '[SHORT-GI-160]', + 'beamform multi-user-beamformer' : '[MU-BEAMFORMER][BF-ANTENNA-3][SOUNDING-DIMENSION-3]', + } + + self.cli_set(self._base_path + [interface, 'capabilities', 'vht', 'channel-set-width', '1']) + self.cli_set(self._base_path + [interface, 'capabilities', 'vht', 'center-channel-freq', 'freq-1', '42']) + self.cli_set(self._base_path + [interface, 'capabilities', 'vht', 'antenna-count', antennas]) + for key in vht_opt: + self.cli_set(self._base_path + [interface, 'capabilities', 'vht'] + key.split()) + + self.cli_commit() + + # + # Validate Config + # + tmp = get_config_value(interface, 'interface') + self.assertEqual(interface, tmp) + + # ssid + tmp = get_config_value(interface, 'ssid') + self.assertEqual(ssid, tmp) + + # channel + tmp = get_config_value(interface, 'channel') + self.assertEqual('36', tmp) + + tmp = get_config_value(interface, 'ht_capab') + for key, value in ht_opt.items(): + self.assertIn(value, tmp) + + tmp = get_config_value(interface, 'vht_capab') + for key, value in vht_opt.items(): + self.assertIn(value, tmp) + + def test_wireless_hostapd_vht_su_beamformer_config(self): + # Single-User-Beamformer + interface = 'wlan1' + ssid = 'vht_su-beamformer' + antennas = '3' + + self.cli_set(self._base_path + [interface, 'ssid', ssid]) + self.cli_set(self._base_path + [interface, 'type', 'access-point']) + self.cli_set(self._base_path + [interface, 'channel', '36']) + + ht_opt = { + # VyOS CLI option hostapd - ht_capab setting + 'channel-set-width ht20' : '[HT20]', + 'channel-set-width ht40-' : '[HT40-]', + 'channel-set-width ht40+' : '[HT40+]', + 'dsss-cck-40' : '[DSSS_CCK-40]', + 'short-gi 20' : '[SHORT-GI-20]', + 'short-gi 40' : '[SHORT-GI-40]', + 'max-amsdu 7935' : '[MAX-AMSDU-7935]', + } + for key in ht_opt: + self.cli_set(self._base_path + [interface, 'capabilities', 'ht'] + key.split()) + + vht_opt = { + # VyOS CLI option hostapd - ht_capab setting + 'max-mpdu 11454' : '[MAX-MPDU-11454]', + 'max-mpdu-exp 2' : '[MAX-A-MPDU-LEN-EXP-2]', + 'stbc tx' : '[TX-STBC-2BY1]', + 'stbc rx 12' : '[RX-STBC-12]', + 'ldpc' : '[RXLDPC]', + 'tx-powersave' : '[VHT-TXOP-PS]', + 'vht-cf' : '[HTC-VHT]', + 'antenna-pattern-fixed' : '[RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN]', + 'link-adaptation both' : '[VHT-LINK-ADAPT3]', + 'short-gi 80' : '[SHORT-GI-80]', + 'short-gi 160' : '[SHORT-GI-160]', + 'beamform single-user-beamformer' : '[SU-BEAMFORMER][BF-ANTENNA-2][SOUNDING-DIMENSION-2]', + } + + self.cli_set(self._base_path + [interface, 'capabilities', 'vht', 'channel-set-width', '1']) + self.cli_set(self._base_path + [interface, 'capabilities', 'vht', 'center-channel-freq', 'freq-1', '42']) + self.cli_set(self._base_path + [interface, 'capabilities', 'vht', 'antenna-count', antennas]) + for key in vht_opt: + self.cli_set(self._base_path + [interface, 'capabilities', 'vht'] + key.split()) + + self.cli_commit() + + # + # Validate Config + # + tmp = get_config_value(interface, 'interface') + self.assertEqual(interface, tmp) + + # ssid + tmp = get_config_value(interface, 'ssid') + self.assertEqual(ssid, tmp) + + # channel + tmp = get_config_value(interface, 'channel') + self.assertEqual('36', tmp) + + tmp = get_config_value(interface, 'ht_capab') + for key, value in ht_opt.items(): + self.assertIn(value, tmp) + + tmp = get_config_value(interface, 'vht_capab') + for key, value in vht_opt.items(): + self.assertIn(value, tmp) + + def test_wireless_hostapd_he_config(self): + # Only set the hostapd (access-point) options - HE mode for 802.11ax at 6GHz + interface = 'wlan1' + ssid = 'ssid' + channel = '1' + sae_pw = 'VyOSVyOSVyOS' + country = 'de' + bss_color = '37' + channel_set_width = '134' + center_channel_freq_1 = '15' + + self.cli_set(wifi_cc_path + [country]) + self.cli_set(self._base_path + [interface, 'ssid', ssid]) + self.cli_set(self._base_path + [interface, 'type', 'access-point']) + self.cli_set(self._base_path + [interface, 'channel', channel]) + self.cli_set(self._base_path + [interface, 'mode', 'ax']) + self.cli_set(self._base_path + [interface, 'security', 'wpa', 'mode', 'wpa3']) + self.cli_set(self._base_path + [interface, 'security', 'wpa', 'passphrase', sae_pw]) + self.cli_set(self._base_path + [interface, 'security', 'wpa', 'cipher', 'CCMP']) + self.cli_set(self._base_path + [interface, 'security', 'wpa', 'cipher', 'GCMP']) + self.cli_set(self._base_path + [interface, 'enable-bf-protection']) + self.cli_set(self._base_path + [interface, 'mgmt-frame-protection', 'required']) + self.cli_set(self._base_path + [interface, 'capabilities', 'he', 'bss-color', bss_color]) + self.cli_set(self._base_path + [interface, 'capabilities', 'he', 'channel-set-width', channel_set_width]) + self.cli_set(self._base_path + [interface, 'capabilities', 'he', 'center-channel-freq', 'freq-1', center_channel_freq_1]) + self.cli_set(self._base_path + [interface, 'capabilities', 'he', 'beamform', 'multi-user-beamformer']) + self.cli_set(self._base_path + [interface, 'capabilities', 'he', 'beamform', 'single-user-beamformer']) + + self.cli_commit() + + # + # Validate Config + # + tmp = get_config_value(interface, 'interface') + self.assertEqual(interface, tmp) + + # ssid + tmp = get_config_value(interface, 'ssid') + self.assertEqual(ssid, tmp) + + # mode of operation resulting from [interface, 'mode', 'ax'] + tmp = get_config_value(interface, 'hw_mode') + self.assertEqual('a', tmp) + tmp = get_config_value(interface, 'ieee80211h') + self.assertEqual('1', tmp) + tmp = get_config_value(interface, 'ieee80211ax') + self.assertEqual('1', tmp) + + # channel and channel width + tmp = get_config_value(interface, 'channel') + self.assertEqual(channel, tmp) + tmp = get_config_value(interface, 'op_class') + self.assertEqual(channel_set_width, tmp) + tmp = get_config_value(interface, 'he_oper_centr_freq_seg0_idx') + self.assertEqual(center_channel_freq_1, tmp) + + # Country code + tmp = get_config_value(interface, 'country_code') + self.assertEqual(country.upper(), tmp) + + # BSS coloring + tmp = get_config_value(interface, 'he_bss_color') + self.assertEqual(bss_color, tmp) + + # sae_password + tmp = get_config_value(interface, 'sae_password') + self.assertEqual(sae_pw, tmp) + + # WPA3 and dependencies + tmp = get_config_value(interface, 'wpa') + self.assertEqual('2', tmp) + tmp = get_config_value(interface, 'rsn_pairwise') + self.assertEqual('CCMP GCMP', tmp) + tmp = get_config_value(interface, 'wpa_key_mgmt') + self.assertEqual('SAE', tmp) + + # beamforming + tmp = get_config_value(interface, 'he_mu_beamformer') + self.assertEqual('1', tmp) + tmp = get_config_value(interface, 'he_su_beamformee') + self.assertEqual('0', tmp) + tmp = get_config_value(interface, 'he_mu_beamformer') + self.assertEqual('1', tmp) + + # Check for running process + self.assertTrue(process_named_running('hostapd')) + +>>>>>>> d5e988ba2 (wireless: T6320: add 802.11ax at 6GHz) def test_wireless_hostapd_wpa_config(self): # Only set the hostapd (access-point) options - interface = 'wlan0' + interface = 'wlan1' phy = 'phy0' ssid = 'ssid' channel = '1' @@ -160,14 +393,31 @@ class WirelessInterfaceTest(BasicInterfaceTest.TestCase): self.cli_set(self._base_path + [interface, 'type', 'access-point']) self.cli_set(self._base_path + [interface, 'mode', mode]) +<<<<<<< HEAD +======= + # SSID and country-code are already configured in self.setUpClass() + # Therefore, we must delete those here to check if commit will fail without it. + self.cli_delete(wifi_cc_path) + self.cli_delete(self._base_path + [interface, 'ssid']) + + # Country-Code must be set + with self.assertRaises(ConfigSessionError): + self.cli_commit() + self.cli_set(wifi_cc_path + [country]) + +>>>>>>> d5e988ba2 (wireless: T6320: add 802.11ax at 6GHz) # SSID must be set with self.assertRaises(ConfigSessionError): self.cli_commit() self.cli_set(self._base_path + [interface, 'ssid', ssid]) +<<<<<<< HEAD # Channel must be set with self.assertRaises(ConfigSessionError): self.cli_commit() +======= + # Channel must be set (defaults to channel 0) +>>>>>>> d5e988ba2 (wireless: T6320: add 802.11ax at 6GHz) self.cli_set(self._base_path + [interface, 'channel', channel]) # Country-Code must be set @@ -213,7 +463,7 @@ class WirelessInterfaceTest(BasicInterfaceTest.TestCase): self.assertTrue(process_named_running('hostapd')) def test_wireless_access_point_bridge(self): - interface = 'wlan0' + interface = 'wlan1' ssid = 'VyOS-Test' bridge = 'br42477' @@ -224,6 +474,7 @@ class WirelessInterfaceTest(BasicInterfaceTest.TestCase): self.cli_set(self._base_path + [interface, 'ssid', ssid]) self.cli_set(self._base_path + [interface, 'country-code', 'se']) self.cli_set(self._base_path + [interface, 'type', 'access-point']) + self.cli_set(self._base_path + [interface, 'channel', '1']) self.cli_commit() @@ -250,7 +501,7 @@ class WirelessInterfaceTest(BasicInterfaceTest.TestCase): self.cli_delete(bridge_path) def test_wireless_security_station_address(self): - interface = 'wlan0' + interface = 'wlan1' ssid = 'VyOS-ACL' hostapd_accept_station_conf = f'/run/hostapd/{interface}_station_accept.conf' |