diff options
Diffstat (limited to 'smoketest/scripts/cli')
-rw-r--r-- | smoketest/scripts/cli/base_interfaces_test.py | 39 | ||||
-rwxr-xr-x | smoketest/scripts/cli/test_configd_init.py | 38 | ||||
-rwxr-xr-x | smoketest/scripts/cli/test_interfaces_vxlan.py | 35 | ||||
-rwxr-xr-x | smoketest/scripts/cli/test_protocols_bfd.py | 33 | ||||
-rwxr-xr-x | smoketest/scripts/cli/test_protocols_bgp.py | 135 | ||||
-rwxr-xr-x | smoketest/scripts/cli/test_protocols_isis.py | 6 | ||||
-rwxr-xr-x | smoketest/scripts/cli/test_protocols_ospf.py | 4 | ||||
-rwxr-xr-x | smoketest/scripts/cli/test_protocols_ospfv3.py | 4 |
8 files changed, 260 insertions, 34 deletions
diff --git a/smoketest/scripts/cli/base_interfaces_test.py b/smoketest/scripts/cli/base_interfaces_test.py index 340ec4edd..bc0a6c128 100644 --- a/smoketest/scripts/cli/base_interfaces_test.py +++ b/smoketest/scripts/cli/base_interfaces_test.py @@ -171,10 +171,10 @@ class BasicInterfaceTest: def test_add_multiple_ip_addresses(self): # Add address for intf in self._interfaces: + for option in self._options.get(intf, []): + self.cli_set(self._base_path + [intf] + option.split()) for addr in self._test_addr: self.cli_set(self._base_path + [intf, 'address', addr]) - for option in self._options.get(intf, []): - self.cli_set(self._base_path + [intf] + option.split()) self.cli_commit() @@ -297,6 +297,23 @@ class BasicInterfaceTest: self.assertEqual(Interface(vif).get_admin_state(), 'up') + # T4064: Delete interface addresses, keep VLAN interface + for interface in self._interfaces: + base = self._base_path + [interface] + for vlan in self._vlan_range: + base = self._base_path + [interface, 'vif', vlan] + self.cli_delete(base + ['address']) + + self.cli_commit() + + # Verify no IP address is assigned + for interface in self._interfaces: + for vlan in self._vlan_range: + vif = f'{intf}.{vlan}' + for address in self._test_addr: + self.assertFalse(is_intf_addr_assigned(vif, address)) + + def test_vif_8021q_mtu_limits(self): # XXX: This testcase is not allowed to run as first testcase, reason # is the Wireless test will first load the wifi kernel hwsim module @@ -493,6 +510,24 @@ class BasicInterfaceTest: tmp = get_interface_config(vif) self.assertEqual(tmp['mtu'], int(self._mtu)) + + # T4064: Delete interface addresses, keep VLAN interface + for interface in self._interfaces: + base = self._base_path + [interface] + for vif_s in self._qinq_range: + for vif_c in self._vlan_range: + self.cli_delete(self._base_path + [interface, 'vif-s', vif_s, 'vif-c', vif_c, 'address']) + + self.cli_commit() + # Verify no IP address is assigned + for interface in self._interfaces: + base = self._base_path + [interface] + for vif_s in self._qinq_range: + for vif_c in self._vlan_range: + vif = f'{interface}.{vif_s}.{vif_c}' + for address in self._test_addr: + self.assertFalse(is_intf_addr_assigned(vif, address)) + # T3972: remove vif-c interfaces from vif-s for interface in self._interfaces: base = self._base_path + [interface] diff --git a/smoketest/scripts/cli/test_configd_init.py b/smoketest/scripts/cli/test_configd_init.py new file mode 100755 index 000000000..5dec89963 --- /dev/null +++ b/smoketest/scripts/cli/test_configd_init.py @@ -0,0 +1,38 @@ +#!/usr/bin/env python3 +# +# Copyright (C) 2021 VyOS maintainers and contributors +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 or later as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +import unittest +from time import sleep + +from vyos.util import cmd, is_systemd_service_running + +class TestConfigdInit(unittest.TestCase): + def setUp(self): + self.running_state = is_systemd_service_running('vyos-configd.service') + + def test_configd_init(self): + if not self.running_state: + cmd('sudo systemctl start vyos-configd.service') + # allow time for init to succeed/fail + sleep(2) + self.assertTrue(is_systemd_service_running('vyos-configd.service')) + + def tearDown(self): + if not self.running_state: + cmd('sudo systemctl stop vyos-configd.service') + +if __name__ == '__main__': + unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_interfaces_vxlan.py b/smoketest/scripts/cli/test_interfaces_vxlan.py index f63c850d8..9278adadd 100755 --- a/smoketest/scripts/cli/test_interfaces_vxlan.py +++ b/smoketest/scripts/cli/test_interfaces_vxlan.py @@ -16,6 +16,7 @@ import unittest +from vyos.configsession import ConfigSessionError from vyos.ifconfig import Interface from vyos.util import get_interface_config @@ -78,6 +79,9 @@ class VXLANInterfaceTest(BasicInterfaceTest.TestCase): label = options['linkinfo']['info_data']['label'] self.assertIn(f'parameters ipv6 flowlabel {label}', self._options[interface]) + if any('external' in s for s in self._options[interface]): + self.assertTrue(options['linkinfo']['info_data']['external']) + self.assertEqual('vxlan', options['linkinfo']['info_kind']) self.assertEqual('set', options['linkinfo']['info_data']['df']) self.assertEqual(f'0x{tos}', options['linkinfo']['info_data']['tos']) @@ -85,5 +89,36 @@ class VXLANInterfaceTest(BasicInterfaceTest.TestCase): self.assertEqual(Interface(interface).get_admin_state(), 'up') ttl += 10 + def test_vxlan_external(self): + interface = 'vxlan0' + source_address = '192.0.2.1' + self.cli_set(self._base_path + [interface, 'external']) + self.cli_set(self._base_path + [interface, 'source-address', source_address]) + + # Both 'VNI' and 'external' can not be specified at the same time. + self.cli_set(self._base_path + [interface, 'vni', '111']) + with self.assertRaises(ConfigSessionError): + self.cli_commit() + self.cli_delete(self._base_path + [interface, 'vni']) + + # Now add some more interfaces - this must fail and a CLI error needs + # to be generated as Linux can only handle one VXLAN tunnel when using + # external mode. + for intf in self._interfaces: + for option in self._options.get(intf, []): + self.cli_set(self._base_path + [intf] + option.split()) + with self.assertRaises(ConfigSessionError): + self.cli_commit() + + # Remove those test interfaces again + for intf in self._interfaces: + self.cli_delete(self._base_path + [intf]) + + self.cli_commit() + + options = get_interface_config(interface) + self.assertTrue(options['linkinfo']['info_data']['external']) + self.assertEqual('vxlan', options['linkinfo']['info_kind']) + if __name__ == '__main__': unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_protocols_bfd.py b/smoketest/scripts/cli/test_protocols_bfd.py index d234750b4..fdc254a05 100755 --- a/smoketest/scripts/cli/test_protocols_bfd.py +++ b/smoketest/scripts/cli/test_protocols_bfd.py @@ -31,7 +31,8 @@ peers = { 'intv_tx' : '600', 'multihop' : '', 'source_addr': '192.0.2.254', - }, + 'profile' : 'foo-bar-baz', + }, '192.0.2.20' : { 'echo_mode' : '', 'intv_echo' : '100', @@ -42,15 +43,16 @@ peers = { 'shutdown' : '', 'profile' : 'foo', 'source_intf': dum_if, - }, - '2001:db8::a' : { + }, + '2001:db8::1000:1' : { 'source_addr': '2001:db8::1', 'vrf' : vrf_name, - }, - '2001:db8::b' : { + }, + '2001:db8::2000:1' : { 'source_addr': '2001:db8::1', 'multihop' : '', - }, + 'profile' : 'baz_foo', + }, } profiles = { @@ -62,7 +64,12 @@ profiles = { 'intv_tx' : '333', 'shutdown' : '', }, - 'bar' : { + 'foo-bar-baz' : { + 'intv_mult' : '4', + 'intv_rx' : '400', + 'intv_tx' : '400', + }, + 'baz_foo' : { 'intv_mult' : '102', 'intv_rx' : '444', 'passive' : '', @@ -107,7 +114,7 @@ class TestProtocolsBFD(VyOSUnitTestSHIM.TestCase): self.cli_commit() # Verify FRR bgpd configuration - frrconfig = self.getFRRconfig('bfd') + frrconfig = self.getFRRconfig('bfd', daemon=PROCESS_NAME) for peer, peer_config in peers.items(): tmp = f'peer {peer}' if 'multihop' in peer_config: @@ -120,7 +127,7 @@ class TestProtocolsBFD(VyOSUnitTestSHIM.TestCase): tmp += f' vrf {peer_config["vrf"]}' self.assertIn(tmp, frrconfig) - peerconfig = self.getFRRconfig(f' peer {peer}', end='') + peerconfig = self.getFRRconfig(f' peer {peer}', end='', daemon=PROCESS_NAME) if 'echo_mode' in peer_config: self.assertIn(f'echo-mode', peerconfig) @@ -143,8 +150,6 @@ class TestProtocolsBFD(VyOSUnitTestSHIM.TestCase): self.cli_delete(['vrf', 'name', vrf_name]) def test_bfd_profile(self): - peer = '192.0.2.10' - for profile, profile_config in profiles.items(): if 'echo_mode' in profile_config: self.cli_set(base_path + ['profile', profile, 'echo-mode']) @@ -164,6 +169,10 @@ class TestProtocolsBFD(VyOSUnitTestSHIM.TestCase): for peer, peer_config in peers.items(): if 'profile' in peer_config: self.cli_set(base_path + ['peer', peer, 'profile', peer_config["profile"] + 'wrong']) + if 'source_addr' in peer_config: + self.cli_set(base_path + ['peer', peer, 'source', 'address', peer_config["source_addr"]]) + if 'source_intf' in peer_config: + self.cli_set(base_path + ['peer', peer, 'source', 'interface', peer_config["source_intf"]]) # BFD profile does not exist! with self.assertRaises(ConfigSessionError): @@ -197,7 +206,7 @@ class TestProtocolsBFD(VyOSUnitTestSHIM.TestCase): self.assertNotIn(f'shutdown', config) for peer, peer_config in peers.items(): - peerconfig = self.getFRRconfig(f' peer {peer}', end='') + peerconfig = self.getFRRconfig(f' peer {peer}', end='', daemon=PROCESS_NAME) if 'profile' in peer_config: self.assertIn(f' profile {peer_config["profile"]}', peerconfig) diff --git a/smoketest/scripts/cli/test_protocols_bgp.py b/smoketest/scripts/cli/test_protocols_bgp.py index 16284ed01..d7230baf4 100755 --- a/smoketest/scripts/cli/test_protocols_bgp.py +++ b/smoketest/scripts/cli/test_protocols_bgp.py @@ -32,9 +32,11 @@ prefix_list_in = 'pfx-foo-in' prefix_list_out = 'pfx-foo-out' prefix_list_in6 = 'pfx-foo-in6' prefix_list_out6 = 'pfx-foo-out6' +bfd_profile = 'foo-bar-baz' neighbor_config = { '192.0.2.1' : { + 'bfd' : '', 'cap_dynamic' : '', 'cap_ext_next' : '', 'remote_as' : '100', @@ -51,23 +53,30 @@ neighbor_config = { 'addpath_all' : '', }, '192.0.2.2' : { + 'bfd_profile' : bfd_profile, 'remote_as' : '200', 'shutdown' : '', 'no_cap_nego' : '', 'port' : '667', 'cap_strict' : '', + 'advertise_map': route_map_in, + 'non_exist_map': route_map_out, 'pfx_list_in' : prefix_list_in, 'pfx_list_out' : prefix_list_out, 'no_send_comm_std' : '', }, '192.0.2.3' : { + 'advertise_map': route_map_in, 'description' : 'foo bar baz', 'remote_as' : '200', 'passive' : '', 'multi_hop' : '5', 'update_src' : 'lo', + 'peer_group' : 'foo', }, '2001:db8::1' : { + 'advertise_map': route_map_in, + 'exist_map' : route_map_out, 'cap_dynamic' : '', 'cap_ext_next' : '', 'remote_as' : '123', @@ -83,6 +92,7 @@ neighbor_config = { 'route_map_out': route_map_out, 'no_send_comm_std' : '', 'addpath_per_as' : '', + 'peer_group' : 'foo-bar', }, '2001:db8::2' : { 'remote_as' : '456', @@ -93,11 +103,15 @@ neighbor_config = { 'pfx_list_in' : prefix_list_in6, 'pfx_list_out' : prefix_list_out6, 'no_send_comm_ext' : '', + 'peer_group' : 'foo-bar_baz', }, } peer_group_config = { 'foo' : { + 'advertise_map': route_map_in, + 'exist_map' : route_map_out, + 'bfd' : '', 'remote_as' : '100', 'passive' : '', 'password' : 'VyOS-Secure123', @@ -105,7 +119,8 @@ peer_group_config = { 'cap_over' : '', 'ttl_security': '5', }, - 'bar' : { + 'foo-bar' : { + 'advertise_map': route_map_in, 'description' : 'foo peer bar group', 'remote_as' : '200', 'shutdown' : '', @@ -115,7 +130,10 @@ peer_group_config = { 'pfx_list_out' : prefix_list_out, 'no_send_comm_ext' : '', }, - 'baz' : { + 'foo-bar_baz' : { + 'advertise_map': route_map_in, + 'non_exist_map': route_map_out, + 'bfd_profile' : bfd_profile, 'cap_dynamic' : '', 'cap_ext_next' : '', 'remote_as' : '200', @@ -128,23 +146,34 @@ peer_group_config = { } class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): - def setUp(self): - self.cli_set(['policy', 'route-map', route_map_in, 'rule', '10', 'action', 'permit']) - self.cli_set(['policy', 'route-map', route_map_out, 'rule', '10', 'action', 'permit']) - self.cli_set(['policy', 'prefix-list', prefix_list_in, 'rule', '10', 'action', 'permit']) - self.cli_set(['policy', 'prefix-list', prefix_list_in, 'rule', '10', 'prefix', '192.0.2.0/25']) - self.cli_set(['policy', 'prefix-list', prefix_list_out, 'rule', '10', 'action', 'permit']) - self.cli_set(['policy', 'prefix-list', prefix_list_out, 'rule', '10', 'prefix', '192.0.2.128/25']) - - self.cli_set(['policy', 'prefix-list6', prefix_list_in6, 'rule', '10', 'action', 'permit']) - self.cli_set(['policy', 'prefix-list6', prefix_list_in6, 'rule', '10', 'prefix', '2001:db8:1000::/64']) - self.cli_set(['policy', 'prefix-list6', prefix_list_out6, 'rule', '10', 'action', 'deny']) - self.cli_set(['policy', 'prefix-list6', prefix_list_out6, 'rule', '10', 'prefix', '2001:db8:2000::/64']) + @classmethod + def setUpClass(cls): + super(cls, cls).setUpClass() + + # ensure we can also run this test on a live system - so lets clean + # out the current configuration :) + cls.cli_delete(cls, base_path) + + cls.cli_set(cls, ['policy', 'route-map', route_map_in, 'rule', '10', 'action', 'permit']) + cls.cli_set(cls, ['policy', 'route-map', route_map_out, 'rule', '10', 'action', 'permit']) + cls.cli_set(cls, ['policy', 'prefix-list', prefix_list_in, 'rule', '10', 'action', 'permit']) + cls.cli_set(cls, ['policy', 'prefix-list', prefix_list_in, 'rule', '10', 'prefix', '192.0.2.0/25']) + cls.cli_set(cls, ['policy', 'prefix-list', prefix_list_out, 'rule', '10', 'action', 'permit']) + cls.cli_set(cls, ['policy', 'prefix-list', prefix_list_out, 'rule', '10', 'prefix', '192.0.2.128/25']) + + cls.cli_set(cls, ['policy', 'prefix-list6', prefix_list_in6, 'rule', '10', 'action', 'permit']) + cls.cli_set(cls, ['policy', 'prefix-list6', prefix_list_in6, 'rule', '10', 'prefix', '2001:db8:1000::/64']) + cls.cli_set(cls, ['policy', 'prefix-list6', prefix_list_out6, 'rule', '10', 'action', 'deny']) + cls.cli_set(cls, ['policy', 'prefix-list6', prefix_list_out6, 'rule', '10', 'prefix', '2001:db8:2000::/64']) + + @classmethod + def tearDownClass(cls): + cls.cli_delete(cls, ['policy']) + def setUp(self): self.cli_set(base_path + ['local-as', ASN]) def tearDown(self): - self.cli_delete(['policy']) self.cli_delete(['vrf']) self.cli_delete(base_path) self.cli_commit() @@ -154,6 +183,11 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): def verify_frr_config(self, peer, peer_config, frrconfig): # recurring patterns to verify for both a simple neighbor and a peer-group + if 'bfd' in peer_config: + self.assertIn(f' neighbor {peer} bfd', frrconfig) + if 'bfd_profile' in peer_config: + self.assertIn(f' neighbor {peer} bfd profile {peer_config["bfd_profile"]}', frrconfig) + self.assertIn(f' neighbor {peer} bfd check-control-plane-failure', frrconfig) if 'cap_dynamic' in peer_config: self.assertIn(f' neighbor {peer} capability dynamic', frrconfig) if 'cap_ext_next' in peer_config: @@ -198,7 +232,13 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): self.assertIn(f' neighbor {peer} addpath-tx-all-paths', frrconfig) if 'addpath_per_as' in peer_config: self.assertIn(f' neighbor {peer} addpath-tx-bestpath-per-AS', frrconfig) - + if 'advertise_map' in peer_config: + base = f' neighbor {peer} advertise-map {peer_config["advertise_map"]}' + if 'exist_map' in peer_config: + base = f'{base} exist-map {peer_config["exist_map"]}' + if 'non_exist_map' in peer_config: + base = f'{base} non-exist-map {peer_config["non_exist_map"]}' + self.assertIn(base, frrconfig) def test_bgp_01_simple(self): router_id = '127.0.0.1' @@ -208,6 +248,8 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): max_path_v4ibgp = '4' max_path_v6 = '8' max_path_v6ibgp = '16' + cond_adv_timer = '30' + min_hold_time = '2' self.cli_set(base_path + ['parameters', 'router-id', router_id]) self.cli_set(base_path + ['parameters', 'log-neighbor-changes']) @@ -229,6 +271,13 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): self.cli_set(base_path + ['parameters', 'bestpath', 'bandwidth', 'default-weight-for-missing']) self.cli_set(base_path + ['parameters', 'bestpath', 'compare-routerid']) + self.cli_set(base_path + ['parameters', 'conditional-advertisement', 'timer', cond_adv_timer]) + self.cli_set(base_path + ['parameters', 'fast-convergence']) + self.cli_set(base_path + ['parameters', 'minimum-holdtime', min_hold_time]) + self.cli_set(base_path + ['parameters', 'reject-as-sets']) + self.cli_set(base_path + ['parameters', 'shutdown']) + self.cli_set(base_path + ['parameters', 'suppress-fib-pending']) + # AFI maximum path support self.cli_set(base_path + ['address-family', 'ipv4-unicast', 'maximum-paths', 'ebgp', max_path_v4]) self.cli_set(base_path + ['address-family', 'ipv4-unicast', 'maximum-paths', 'ibgp', max_path_v4ibgp]) @@ -244,11 +293,17 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): self.assertIn(f' bgp router-id {router_id}', frrconfig) self.assertIn(f' bgp log-neighbor-changes', frrconfig) self.assertIn(f' bgp default local-preference {local_pref}', frrconfig) + self.assertIn(f' bgp conditional-advertisement timer {cond_adv_timer}', frrconfig) + self.assertIn(f' bgp fast-convergence', frrconfig) self.assertIn(f' bgp graceful-restart stalepath-time {stalepath_time}', frrconfig) self.assertIn(f' bgp graceful-shutdown', frrconfig) self.assertIn(f' bgp bestpath as-path multipath-relax', frrconfig) self.assertIn(f' bgp bestpath bandwidth default-weight-for-missing', frrconfig) self.assertIn(f' bgp bestpath compare-routerid', frrconfig) + self.assertIn(f' bgp minimum-holdtime {min_hold_time}', frrconfig) + self.assertIn(f' bgp reject-as-sets', frrconfig) + self.assertIn(f' bgp shutdown', frrconfig) + self.assertIn(f' bgp suppress-fib-pending', frrconfig) self.assertNotIn(f'bgp ebgp-requires-policy', frrconfig) afiv4_config = self.getFRRconfig(' address-family ipv4 unicast') @@ -270,6 +325,11 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): if 'adv_interv' in peer_config: self.cli_set(base_path + ['neighbor', peer, 'advertisement-interval', peer_config["adv_interv"]]) + if 'bfd' in peer_config: + self.cli_set(base_path + ['neighbor', peer, 'bfd']) + if 'bfd_profile' in peer_config: + self.cli_set(base_path + ['neighbor', peer, 'bfd', 'profile', peer_config["bfd_profile"]]) + self.cli_set(base_path + ['neighbor', peer, 'bfd', 'check-control-plane-failure']) if 'cap_dynamic' in peer_config: self.cli_set(base_path + ['neighbor', peer, 'capability', 'dynamic']) if 'cap_ext_next' in peer_config: @@ -319,6 +379,20 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): if 'addpath_per_as' in peer_config: self.cli_set(base_path + ['neighbor', peer, 'address-family', afi, 'addpath-tx-per-as']) + # Conditional advertisement + if 'advertise_map' in peer_config: + self.cli_set(base_path + ['neighbor', peer, 'address-family', afi, 'conditionally-advertise', 'advertise-map', peer_config["advertise_map"]]) + # Either exist-map or non-exist-map needs to be specified + if 'exist_map' not in peer_config and 'non_exist_map' not in peer_config: + with self.assertRaises(ConfigSessionError): + self.cli_commit() + self.cli_set(base_path + ['neighbor', peer, 'address-family', afi, 'conditionally-advertise', 'exist-map', route_map_in]) + + if 'exist_map' in peer_config: + self.cli_set(base_path + ['neighbor', peer, 'address-family', afi, 'conditionally-advertise', 'exist-map', peer_config["exist_map"]]) + if 'non_exist_map' in peer_config: + self.cli_set(base_path + ['neighbor', peer, 'address-family', afi, 'conditionally-advertise', 'non-exist-map', peer_config["non_exist_map"]]) + # commit changes self.cli_commit() @@ -339,6 +413,11 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): def test_bgp_03_peer_groups(self): # Test out individual peer-group configuration items for peer_group, config in peer_group_config.items(): + if 'bfd' in config: + self.cli_set(base_path + ['peer-group', peer_group, 'bfd']) + if 'bfd_profile' in config: + self.cli_set(base_path + ['peer-group', peer_group, 'bfd', 'profile', config["bfd_profile"]]) + self.cli_set(base_path + ['peer-group', peer_group, 'bfd', 'check-control-plane-failure']) if 'cap_dynamic' in config: self.cli_set(base_path + ['peer-group', peer_group, 'capability', 'dynamic']) if 'cap_ext_next' in config: @@ -382,6 +461,24 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): if 'addpath_per_as' in config: self.cli_set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'addpath-tx-per-as']) + # Conditional advertisement + if 'advertise_map' in config: + self.cli_set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'conditionally-advertise', 'advertise-map', config["advertise_map"]]) + # Either exist-map or non-exist-map needs to be specified + if 'exist_map' not in config and 'non_exist_map' not in config: + with self.assertRaises(ConfigSessionError): + self.cli_commit() + self.cli_set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'conditionally-advertise', 'exist-map', route_map_in]) + + if 'exist_map' in config: + self.cli_set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'conditionally-advertise', 'exist-map', config["exist_map"]]) + if 'non_exist_map' in config: + self.cli_set(base_path + ['peer-group', peer_group, 'address-family', 'ipv4-unicast', 'conditionally-advertise', 'non-exist-map', config["non_exist_map"]]) + + for peer, peer_config in neighbor_config.items(): + if 'peer_group' in peer_config: + self.cli_set(base_path + ['neighbor', peer, 'peer-group', peer_config['peer_group']]) + # commit changes self.cli_commit() @@ -393,6 +490,10 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): self.assertIn(f' neighbor {peer_group} peer-group', frrconfig) self.verify_frr_config(peer, peer_config, frrconfig) + for peer, peer_config in neighbor_config.items(): + if 'peer_group' in peer_config: + self.assertIn(f' neighbor {peer} peer-group {peer_config["peer_group"]}', frrconfig) + def test_bgp_04_afi_ipv4(self): networks = { @@ -753,4 +854,4 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): self.assertIn(f' exit-address-family', afi_config) if __name__ == '__main__': - unittest.main(verbosity=2)
\ No newline at end of file + unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_protocols_isis.py b/smoketest/scripts/cli/test_protocols_isis.py index e42040025..7f51c7178 100755 --- a/smoketest/scripts/cli/test_protocols_isis.py +++ b/smoketest/scripts/cli/test_protocols_isis.py @@ -198,17 +198,19 @@ class TestProtocolsISIS(VyOSUnitTestSHIM.TestCase): self.assertIn(f' area-password clear {password}', tmp) - def test_isis_06_spf_delay(self): + def test_isis_06_spf_delay_bfd(self): network = 'point-to-point' holddown = '10' init_delay = '50' long_delay = '200' short_delay = '100' time_to_learn = '75' + bfd_profile = 'isis-bfd' self.cli_set(base_path + ['net', net]) for interface in self._interfaces: self.cli_set(base_path + ['interface', interface, 'network', network]) + self.cli_set(base_path + ['interface', interface, 'bfd', 'profile', bfd_profile]) self.cli_set(base_path + ['spf-delay-ietf', 'holddown', holddown]) # verify() - All types of spf-delay must be configured @@ -244,6 +246,8 @@ class TestProtocolsISIS(VyOSUnitTestSHIM.TestCase): self.assertIn(f' ip router isis {domain}', tmp) self.assertIn(f' ipv6 router isis {domain}', tmp) self.assertIn(f' isis network {network}', tmp) + self.assertIn(f' isis bfd', tmp) + self.assertIn(f' isis bfd profile {bfd_profile}', tmp) if __name__ == '__main__': unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_protocols_ospf.py b/smoketest/scripts/cli/test_protocols_ospf.py index 04853c5fe..5783c5efb 100755 --- a/smoketest/scripts/cli/test_protocols_ospf.py +++ b/smoketest/scripts/cli/test_protocols_ospf.py @@ -251,13 +251,14 @@ class TestProtocolsOSPF(VyOSUnitTestSHIM.TestCase): cost = '150' network = 'point-to-point' priority = '200' + bfd_profile = 'vyos-test' self.cli_set(base_path + ['passive-interface', 'default']) for interface in interfaces: base_interface = base_path + ['interface', interface] self.cli_set(base_interface + ['authentication', 'plaintext-password', password]) self.cli_set(base_interface + ['bandwidth', bandwidth]) - self.cli_set(base_interface + ['bfd']) + self.cli_set(base_interface + ['bfd', 'profile', bfd_profile]) self.cli_set(base_interface + ['cost', cost]) self.cli_set(base_interface + ['mtu-ignore']) self.cli_set(base_interface + ['network', network]) @@ -272,6 +273,7 @@ class TestProtocolsOSPF(VyOSUnitTestSHIM.TestCase): self.assertIn(f'interface {interface}', config) self.assertIn(f' ip ospf authentication-key {password}', config) self.assertIn(f' ip ospf bfd', config) + self.assertIn(f' ip ospf bfd profile {bfd_profile}', config) self.assertIn(f' ip ospf cost {cost}', config) self.assertIn(f' ip ospf mtu-ignore', config) self.assertIn(f' ip ospf network {network}', config) diff --git a/smoketest/scripts/cli/test_protocols_ospfv3.py b/smoketest/scripts/cli/test_protocols_ospfv3.py index f0557f640..40dd254a8 100755 --- a/smoketest/scripts/cli/test_protocols_ospfv3.py +++ b/smoketest/scripts/cli/test_protocols_ospfv3.py @@ -110,6 +110,7 @@ class TestProtocolsOSPFv3(VyOSUnitTestSHIM.TestCase): self.assertIn(f' redistribute {protocol} route-map {route_map}', frrconfig) def test_ospfv3_04_interfaces(self): + bfd_profile = 'vyos-ipv6' self.cli_set(base_path + ['parameters', 'router-id', router_id]) self.cli_set(base_path + ['area', default_area]) @@ -119,7 +120,7 @@ class TestProtocolsOSPFv3(VyOSUnitTestSHIM.TestCase): interfaces = Section.interfaces('ethernet') for interface in interfaces: if_base = base_path + ['interface', interface] - self.cli_set(if_base + ['bfd']) + self.cli_set(if_base + ['bfd', 'profile', bfd_profile]) self.cli_set(if_base + ['cost', cost]) self.cli_set(if_base + ['instance-id', '0']) self.cli_set(if_base + ['mtu-ignore']) @@ -142,6 +143,7 @@ class TestProtocolsOSPFv3(VyOSUnitTestSHIM.TestCase): if_config = self.getFRRconfig(f'interface {interface}') self.assertIn(f'interface {interface}', if_config) self.assertIn(f' ipv6 ospf6 bfd', if_config) + self.assertIn(f' ipv6 ospf6 bfd profile {bfd_profile}', if_config) self.assertIn(f' ipv6 ospf6 cost {cost}', if_config) self.assertIn(f' ipv6 ospf6 mtu-ignore', if_config) self.assertIn(f' ipv6 ospf6 network point-to-point', if_config) |