summaryrefslogtreecommitdiff
path: root/src/conf_mode/accel_l2tp.py
diff options
context:
space:
mode:
Diffstat (limited to 'src/conf_mode/accel_l2tp.py')
-rwxr-xr-xsrc/conf_mode/accel_l2tp.py638
1 files changed, 338 insertions, 300 deletions
diff --git a/src/conf_mode/accel_l2tp.py b/src/conf_mode/accel_l2tp.py
index 7c879f596..9c20cb2f3 100755
--- a/src/conf_mode/accel_l2tp.py
+++ b/src/conf_mode/accel_l2tp.py
@@ -33,9 +33,9 @@ chap_secrets = l2tp_cnf_dir + '/chap-secrets'
l2tp_conf = l2tp_cnf_dir + '/l2tp.config'
# accel-pppd -d -c /etc/accel-ppp/l2tp/l2tp.config -p /var/run/accel_l2tp.pid
-### config path creation
+# config path creation
if not os.path.exists(l2tp_cnf_dir):
- os.makedirs(l2tp_cnf_dir)
+ os.makedirs(l2tp_cnf_dir)
###
# inline helper functions
@@ -44,322 +44,360 @@ if not os.path.exists(l2tp_cnf_dir):
# if it takes longer than 100 * 0.5 secs, exception is being raised
# not sure if that's the best way to check it, but it worked so far quite well
###
+
+
def chk_con():
- cnt = 0
- s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
- while True:
- try:
- s.connect(("127.0.0.1", 2004))
- break
- except ConnectionRefusedError:
- time.sleep(0.5)
- cnt +=1
- if cnt == 100:
- raise("failed to start l2tp server")
- break
+ cnt = 0
+ s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+ while True:
+ try:
+ s.connect(("127.0.0.1", 2004))
+ break
+ except ConnectionRefusedError:
+ time.sleep(0.5)
+ cnt += 1
+ if cnt == 100:
+ raise("failed to start l2tp server")
+ break
+
def accel_cmd(cmd=''):
- if not cmd:
- return None
- try:
- ret = subprocess.check_output(['/usr/bin/accel-cmd','-p','2004',cmd]).decode().strip()
- return ret
- except:
- return 1
+ if not cmd:
+ return None
+ try:
+ ret = subprocess.check_output(
+ ['/usr/bin/accel-cmd', '-p', '2004', cmd]).decode().strip()
+ return ret
+ except:
+ return 1
###
# inline helper functions end
###
+
def get_config():
- c = Config()
- if not c.exists('vpn l2tp remote-access '):
- return None
-
- c.set_level('vpn l2tp remote-access')
- config_data = {
- 'authentication' : {
- 'mode' : 'local',
- 'local-users' : {
+ c = Config()
+ if not c.exists('vpn l2tp remote-access '):
+ return None
+
+ c.set_level('vpn l2tp remote-access')
+ config_data = {
+ 'authentication': {
+ 'mode': 'local',
+ 'local-users': {
+ },
+ 'radiussrv': {},
+ 'radiusopt': {},
+ 'auth_proto': [],
+ 'mppe': 'prefer'
},
- 'radiussrv' : {},
- 'radiusopt' : {},
- 'auth_proto' : [],
- 'mppe' : 'prefer'
- },
- 'outside_addr' : '',
- 'gateway_address' : '10.255.255.0',
- 'dns' : [],
- 'dnsv6' : [],
- 'wins' : [],
- 'client_ip_pool' : None,
- 'client_ip_subnets' : [],
- 'client_ipv6_pool' : {},
- 'mtu' : '1436',
- 'ip6_column' : '',
- 'ip6_dp_column' : '',
- 'ppp_options' : {},
- }
-
- ### general options ###
-
- if c.exists('dns-servers server-1'):
- config_data['dns'].append( c.return_value('dns-servers server-1'))
- if c.exists('dns-servers server-2'):
- config_data['dns'].append( c.return_value('dns-servers server-2'))
- if c.exists('dnsv6-servers'):
- for dns6_server in c.return_values('dnsv6-servers'):
- config_data['dnsv6'].append(dns6_server)
- if c.exists('wins-servers server-1'):
- config_data['wins'].append( c.return_value('wins-servers server-1'))
- if c.exists('wins-servers server-2'):
- config_data['wins'].append( c.return_value('wins-servers server-2'))
- if c.exists('outside-address'):
- config_data['outside_addr'] = c.return_value('outside-address')
-
- ### auth local
- if c.exists('authentication mode local'):
- if c.exists('authentication local-users username'):
- for usr in c.list_nodes('authentication local-users username'):
- config_data['authentication']['local-users'].update(
- {
- usr : {
- 'passwd' : '',
- 'state' : 'enabled',
- 'ip' : '*',
- 'upload' : None,
- 'download' : None
- }
- }
- )
-
- if c.exists('authentication local-users username ' + usr + ' password'):
- config_data['authentication']['local-users'][usr]['passwd'] = c.return_value('authentication local-users username ' + usr + ' password')
- if c.exists('authentication local-users username ' + usr + ' disable'):
- config_data['authentication']['local-users'][usr]['state'] = 'disable'
- if c.exists('authentication local-users username ' + usr + ' static-ip'):
- config_data['authentication']['local-users'][usr]['ip'] = c.return_value('authentication local-users username ' + usr + ' static-ip')
- if c.exists('authentication local-users username ' + usr + ' rate-limit download'):
- config_data['authentication']['local-users'][usr]['download'] = c.return_value('authentication local-users username ' + usr + ' rate-limit download')
- if c.exists('authentication local-users username ' + usr + ' rate-limit upload'):
- config_data['authentication']['local-users'][usr]['upload'] = c.return_value('authentication local-users username ' + usr + ' rate-limit upload')
-
- ### authentication mode radius servers and settings
-
- if c.exists('authentication mode radius'):
- config_data['authentication']['mode'] = 'radius'
- rsrvs = c.list_nodes('authentication radius server')
- for rsrv in rsrvs:
- if c.return_value('authentication radius server ' + rsrv + ' fail-time') == None:
- ftime = '0'
- else:
- ftime = str(c.return_value('authentication radius server ' + rsrv + ' fail-time'))
- if c.return_value('authentication radius-server ' + rsrv + ' req-limit') == None:
- reql = '0'
- else:
- reql = str(c.return_value('authentication radius server ' + rsrv + ' req-limit'))
-
- config_data['authentication']['radiussrv'].update(
- {
- rsrv : {
- 'secret' : c.return_value('authentication radius server ' + rsrv + ' key'),
- 'fail-time' : ftime,
- 'req-limit' : reql
- }
- }
- )
- ### Source ip address feature
- if c.exists('authentication radius source-address'):
- config_data['authentication']['radius_source_address'] = c.return_value('authentication radius source-address')
-
- #### advanced radius-setting
- if c.exists('authentication radius acct-timeout'):
- config_data['authentication']['radiusopt']['acct-timeout'] = c.return_value('authentication radius acct-timeout')
- if c.exists('authentication radius max-try'):
- config_data['authentication']['radiusopt']['max-try'] = c.return_value('authentication radius max-try')
- if c.exists('authentication radius timeout'):
- config_data['authentication']['radiusopt']['timeout'] = c.return_value('authentication radius timeout')
- if c.exists('authentication radius nas-identifier'):
- config_data['authentication']['radiusopt']['nas-id'] = c.return_value('authentication radius nas-identifier')
- if c.exists('authentication radius dae-server'):
- # Set default dae-server port if not defined
- if c.exists('authentication radius dae-server port'):
- dae_server_port = c.return_value('authentication radius dae-server port')
- else:
- dae_server_port = "3799"
- config_data['authentication']['radiusopt'].update(
- {
- 'dae-srv' : {
- 'ip-addr' : c.return_value('authentication radius dae-server ip-address'),
- 'port' : dae_server_port,
- 'secret' : str(c.return_value('authentication radius dae-server secret'))
- }
- }
- )
- #### filter-id is the internal accel default if attribute is empty
- #### set here as default for visibility which may change in the future
- if c.exists('authentication radius rate-limit enable'):
- if not c.exists('authentication radius rate-limit attribute'):
- config_data['authentication']['radiusopt']['shaper'] = {
- 'attr' : 'Filter-Id'
- }
- else:
- config_data['authentication']['radiusopt']['shaper'] = {
- 'attr' : c.return_value('authentication radius rate-limit attribute')
- }
- if c.exists('authentication radius rate-limit vendor'):
- config_data['authentication']['radiusopt']['shaper']['vendor'] = c.return_value('authentication radius rate-limit vendor')
-
- if c.exists('client-ip-pool'):
- if c.exists('client-ip-pool start') and c.exists('client-ip-pool stop'):
- config_data['client_ip_pool'] = c.return_value('client-ip-pool start') + '-' + re.search('[0-9]+$', c.return_value('client-ip-pool stop')).group(0)
-
- if c.exists('client-ip-pool subnet'):
- config_data['client_ip_subnets'] = c.return_values('client-ip-pool subnet')
-
- if c.exists('client-ipv6-pool prefix'):
- config_data['client_ipv6_pool']['prefix'] = c.return_values('client-ipv6-pool prefix')
- config_data['ip6_column'] = 'ip6,'
- if c.exists('client-ipv6-pool delegate-prefix'):
- config_data['client_ipv6_pool']['delegate_prefix'] = c.return_values('client-ipv6-pool delegate-prefix')
- config_data['ip6_dp_column'] = 'ip6-dp,'
-
- if c.exists('mtu'):
- config_data['mtu'] = c.return_value('mtu')
-
- ### gateway address
- if c.exists('gateway-address'):
- config_data['gateway_address'] = c.return_value('gateway-address')
- else:
- ### calculate gw-ip-address
- if c.exists('client-ip-pool start'):
- ### use start ip as gw-ip-address
- config_data['gateway_address'] = c.return_value('client-ip-pool start')
- elif c.exists('client-ip-pool subnet'):
- ### use first ip address from first defined pool
- lst_ip = re.findall("\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}", c.return_values('client-ip-pool subnet')[0])
- config_data['gateway_address'] = lst_ip[0]
-
- if c.exists('authentication require'):
- auth_mods = {'pap' : 'pap','chap' : 'auth_chap_md5', 'mschap' : 'auth_mschap_v1', 'mschap-v2' : 'auth_mschap_v2'}
- for proto in c.return_values('authentication require'):
- config_data['authentication']['auth_proto'].append(auth_mods[proto])
- else:
- config_data['authentication']['auth_proto'] = ['auth_mschap_v2']
-
- if c.exists('authentication mppe'):
- config_data['authentication']['mppe'] = c.return_value('authentication mppe')
-
- if c.exists('idle'):
- config_data['idle_timeout'] = c.return_value('idle')
-
- ### LNS secret
- if c.exists('lns shared-secret'):
- config_data['lns_shared_secret'] = c.return_value('lns shared-secret')
-
- if c.exists('ccp-disable'):
- config_data['ccp_disable'] = True
-
- ### ppp_options
- ppp_options = {}
- if c.exists('ppp-options'):
- if c.exists('ppp-options lcp-echo-failure'):
- ppp_options['lcp-echo-failure'] = c.return_value('ppp-options lcp-echo-failure')
- if c.exists('ppp-options lcp-echo-interval'):
- ppp_options['lcp-echo-interval'] = c.return_value('ppp-options lcp-echo-interval')
-
- if len(ppp_options) !=0:
- config_data['ppp_options'] = ppp_options
-
- return config_data
+ 'outside_addr': '',
+ 'gateway_address': '10.255.255.0',
+ 'dns': [],
+ 'dnsv6': [],
+ 'wins': [],
+ 'client_ip_pool': None,
+ 'client_ip_subnets': [],
+ 'client_ipv6_pool': {},
+ 'mtu': '1436',
+ 'ip6_column': '',
+ 'ip6_dp_column': '',
+ 'ppp_options': {},
+ }
+
+ ### general options ###
+
+ if c.exists('dns-servers server-1'):
+ config_data['dns'].append(c.return_value('dns-servers server-1'))
+ if c.exists('dns-servers server-2'):
+ config_data['dns'].append(c.return_value('dns-servers server-2'))
+ if c.exists('dnsv6-servers'):
+ for dns6_server in c.return_values('dnsv6-servers'):
+ config_data['dnsv6'].append(dns6_server)
+ if c.exists('wins-servers server-1'):
+ config_data['wins'].append(c.return_value('wins-servers server-1'))
+ if c.exists('wins-servers server-2'):
+ config_data['wins'].append(c.return_value('wins-servers server-2'))
+ if c.exists('outside-address'):
+ config_data['outside_addr'] = c.return_value('outside-address')
+
+ # auth local
+ if c.exists('authentication mode local'):
+ if c.exists('authentication local-users username'):
+ for usr in c.list_nodes('authentication local-users username'):
+ config_data['authentication']['local-users'].update(
+ {
+ usr: {
+ 'passwd': '',
+ 'state': 'enabled',
+ 'ip': '*',
+ 'upload': None,
+ 'download': None
+ }
+ }
+ )
+
+ if c.exists('authentication local-users username ' + usr + ' password'):
+ config_data['authentication']['local-users'][usr]['passwd'] = c.return_value(
+ 'authentication local-users username ' + usr + ' password')
+ if c.exists('authentication local-users username ' + usr + ' disable'):
+ config_data['authentication']['local-users'][usr]['state'] = 'disable'
+ if c.exists('authentication local-users username ' + usr + ' static-ip'):
+ config_data['authentication']['local-users'][usr]['ip'] = c.return_value(
+ 'authentication local-users username ' + usr + ' static-ip')
+ if c.exists('authentication local-users username ' + usr + ' rate-limit download'):
+ config_data['authentication']['local-users'][usr]['download'] = c.return_value(
+ 'authentication local-users username ' + usr + ' rate-limit download')
+ if c.exists('authentication local-users username ' + usr + ' rate-limit upload'):
+ config_data['authentication']['local-users'][usr]['upload'] = c.return_value(
+ 'authentication local-users username ' + usr + ' rate-limit upload')
+
+ # authentication mode radius servers and settings
+
+ if c.exists('authentication mode radius'):
+ config_data['authentication']['mode'] = 'radius'
+ rsrvs = c.list_nodes('authentication radius server')
+ for rsrv in rsrvs:
+ if c.return_value('authentication radius server ' + rsrv + ' fail-time') == None:
+ ftime = '0'
+ else:
+ ftime = str(c.return_value(
+ 'authentication radius server ' + rsrv + ' fail-time'))
+ if c.return_value('authentication radius-server ' + rsrv + ' req-limit') == None:
+ reql = '0'
+ else:
+ reql = str(c.return_value(
+ 'authentication radius server ' + rsrv + ' req-limit'))
+
+ config_data['authentication']['radiussrv'].update(
+ {
+ rsrv: {
+ 'secret': c.return_value('authentication radius server ' + rsrv + ' key'),
+ 'fail-time': ftime,
+ 'req-limit': reql
+ }
+ }
+ )
+ # Source ip address feature
+ if c.exists('authentication radius source-address'):
+ config_data['authentication']['radius_source_address'] = c.return_value(
+ 'authentication radius source-address')
+
+ # advanced radius-setting
+ if c.exists('authentication radius acct-timeout'):
+ config_data['authentication']['radiusopt']['acct-timeout'] = c.return_value(
+ 'authentication radius acct-timeout')
+ if c.exists('authentication radius max-try'):
+ config_data['authentication']['radiusopt']['max-try'] = c.return_value(
+ 'authentication radius max-try')
+ if c.exists('authentication radius timeout'):
+ config_data['authentication']['radiusopt']['timeout'] = c.return_value(
+ 'authentication radius timeout')
+ if c.exists('authentication radius nas-identifier'):
+ config_data['authentication']['radiusopt']['nas-id'] = c.return_value(
+ 'authentication radius nas-identifier')
+ if c.exists('authentication radius dae-server'):
+ # Set default dae-server port if not defined
+ if c.exists('authentication radius dae-server port'):
+ dae_server_port = c.return_value(
+ 'authentication radius dae-server port')
+ else:
+ dae_server_port = "3799"
+ config_data['authentication']['radiusopt'].update(
+ {
+ 'dae-srv': {
+ 'ip-addr': c.return_value('authentication radius dae-server ip-address'),
+ 'port': dae_server_port,
+ 'secret': str(c.return_value('authentication radius dae-server secret'))
+ }
+ }
+ )
+ # filter-id is the internal accel default if attribute is empty
+ # set here as default for visibility which may change in the future
+ if c.exists('authentication radius rate-limit enable'):
+ if not c.exists('authentication radius rate-limit attribute'):
+ config_data['authentication']['radiusopt']['shaper'] = {
+ 'attr': 'Filter-Id'
+ }
+ else:
+ config_data['authentication']['radiusopt']['shaper'] = {
+ 'attr': c.return_value('authentication radius rate-limit attribute')
+ }
+ if c.exists('authentication radius rate-limit vendor'):
+ config_data['authentication']['radiusopt']['shaper']['vendor'] = c.return_value(
+ 'authentication radius rate-limit vendor')
+
+ if c.exists('client-ip-pool'):
+ if c.exists('client-ip-pool start') and c.exists('client-ip-pool stop'):
+ config_data['client_ip_pool'] = c.return_value(
+ 'client-ip-pool start') + '-' + re.search('[0-9]+$', c.return_value('client-ip-pool stop')).group(0)
+
+ if c.exists('client-ip-pool subnet'):
+ config_data['client_ip_subnets'] = c.return_values(
+ 'client-ip-pool subnet')
+
+ if c.exists('client-ipv6-pool prefix'):
+ config_data['client_ipv6_pool']['prefix'] = c.return_values(
+ 'client-ipv6-pool prefix')
+ config_data['ip6_column'] = 'ip6,'
+ if c.exists('client-ipv6-pool delegate-prefix'):
+ config_data['client_ipv6_pool']['delegate_prefix'] = c.return_values(
+ 'client-ipv6-pool delegate-prefix')
+ config_data['ip6_dp_column'] = 'ip6-dp,'
+
+ if c.exists('mtu'):
+ config_data['mtu'] = c.return_value('mtu')
+
+ # gateway address
+ if c.exists('gateway-address'):
+ config_data['gateway_address'] = c.return_value('gateway-address')
+ else:
+ # calculate gw-ip-address
+ if c.exists('client-ip-pool start'):
+ # use start ip as gw-ip-address
+ config_data['gateway_address'] = c.return_value(
+ 'client-ip-pool start')
+ elif c.exists('client-ip-pool subnet'):
+ # use first ip address from first defined pool
+ lst_ip = re.findall("\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}", c.return_values(
+ 'client-ip-pool subnet')[0])
+ config_data['gateway_address'] = lst_ip[0]
+
+ if c.exists('authentication require'):
+ auth_mods = {'pap': 'pap', 'chap': 'auth_chap_md5',
+ 'mschap': 'auth_mschap_v1', 'mschap-v2': 'auth_mschap_v2'}
+ for proto in c.return_values('authentication require'):
+ config_data['authentication']['auth_proto'].append(
+ auth_mods[proto])
+ else:
+ config_data['authentication']['auth_proto'] = ['auth_mschap_v2']
+
+ if c.exists('authentication mppe'):
+ config_data['authentication']['mppe'] = c.return_value(
+ 'authentication mppe')
+
+ if c.exists('idle'):
+ config_data['idle_timeout'] = c.return_value('idle')
+
+ # LNS secret
+ if c.exists('lns shared-secret'):
+ config_data['lns_shared_secret'] = c.return_value('lns shared-secret')
+
+ if c.exists('ccp-disable'):
+ config_data['ccp_disable'] = True
+
+ # ppp_options
+ ppp_options = {}
+ if c.exists('ppp-options'):
+ if c.exists('ppp-options lcp-echo-failure'):
+ ppp_options['lcp-echo-failure'] = c.return_value(
+ 'ppp-options lcp-echo-failure')
+ if c.exists('ppp-options lcp-echo-interval'):
+ ppp_options['lcp-echo-interval'] = c.return_value(
+ 'ppp-options lcp-echo-interval')
+
+ if len(ppp_options) != 0:
+ config_data['ppp_options'] = ppp_options
+
+ return config_data
+
def verify(c):
- if c == None:
- return None
-
- if c['authentication']['mode'] == 'local':
- if not c['authentication']['local-users']:
- raise ConfigError('l2tp-server authentication local-users required')
- for usr in c['authentication']['local-users']:
- if not c['authentication']['local-users'][usr]['passwd']:
- raise ConfigError('user ' + usr + ' requires a password')
-
- if c['authentication']['mode'] == 'radius':
- if len(c['authentication']['radiussrv']) == 0:
- raise ConfigError('radius server required')
- for rsrv in c['authentication']['radiussrv']:
- if c['authentication']['radiussrv'][rsrv]['secret'] == None:
- raise ConfigError('radius server ' + rsrv + ' needs a secret configured')
-
- ### check for the existence of a client ip pool
- if not c['client_ip_pool'] and not c['client_ip_subnets']:
- raise ConfigError("set vpn l2tp remote-access client-ip-pool requires subnet or start/stop IP pool")
-
- ## check ipv6
- if 'delegate_prefix' in c['client_ipv6_pool'] and not 'prefix' in c['client_ipv6_pool']:
- raise ConfigError("\"set vpn l2tp remote-access client-ipv6-pool prefix\" required for delegate-prefix ")
-
- if len(c['dnsv6']) > 3:
- raise ConfigError("Maximum allowed dnsv6-servers addresses is 3")
+ if c == None:
+ return None
+
+ if c['authentication']['mode'] == 'local':
+ if not c['authentication']['local-users']:
+ raise ConfigError(
+ 'l2tp-server authentication local-users required')
+ for usr in c['authentication']['local-users']:
+ if not c['authentication']['local-users'][usr]['passwd']:
+ raise ConfigError('user ' + usr + ' requires a password')
+
+ if c['authentication']['mode'] == 'radius':
+ if len(c['authentication']['radiussrv']) == 0:
+ raise ConfigError('radius server required')
+ for rsrv in c['authentication']['radiussrv']:
+ if c['authentication']['radiussrv'][rsrv]['secret'] == None:
+ raise ConfigError('radius server ' + rsrv +
+ ' needs a secret configured')
+
+ # check for the existence of a client ip pool
+ if not c['client_ip_pool'] and not c['client_ip_subnets']:
+ raise ConfigError(
+ "set vpn l2tp remote-access client-ip-pool requires subnet or start/stop IP pool")
+
+ # check ipv6
+ if 'delegate_prefix' in c['client_ipv6_pool'] and not 'prefix' in c['client_ipv6_pool']:
+ raise ConfigError(
+ "\"set vpn l2tp remote-access client-ipv6-pool prefix\" required for delegate-prefix ")
+
+ if len(c['dnsv6']) > 3:
+ raise ConfigError("Maximum allowed dnsv6-servers addresses is 3")
+
def generate(c):
- if c == None:
- return None
-
- # Prepare Jinja2 template loader from files
- tmpl_path = os.path.join(vyos_data_dir['data'], 'templates', 'l2tp')
- fs_loader = FileSystemLoader(tmpl_path)
- env = Environment(loader=fs_loader)
-
- ### accel-cmd reload doesn't work so any change results in a restart of the daemon
- try:
- if os.cpu_count() == 1:
- c['thread_cnt'] = 1
- else:
- c['thread_cnt'] = int(os.cpu_count()/2)
- except KeyError:
- if os.cpu_count() == 1:
- c['thread_cnt'] = 1
- else:
- c['thread_cnt'] = int(os.cpu_count()/2)
+ if c == None:
+ return None
- tmpl = env.get_template('l2tp.config.tmpl')
- config_text = tmpl.render(c)
- open(l2tp_conf,'w').write(config_text)
+ # Prepare Jinja2 template loader from files
+ tmpl_path = os.path.join(vyos_data_dir['data'], 'templates', 'l2tp')
+ fs_loader = FileSystemLoader(tmpl_path)
+ env = Environment(loader=fs_loader)
- if c['authentication']['local-users']:
- tmpl = env.get_template('chap-secrets.tmpl')
- chap_secrets_txt = tmpl.render(c)
- old_umask = os.umask(0o077)
- open(chap_secrets,'w').write(chap_secrets_txt)
- os.umask(old_umask)
+ # accel-cmd reload doesn't work so any change results in a restart of the daemon
+ try:
+ if os.cpu_count() == 1:
+ c['thread_cnt'] = 1
+ else:
+ c['thread_cnt'] = int(os.cpu_count()/2)
+ except KeyError:
+ if os.cpu_count() == 1:
+ c['thread_cnt'] = 1
+ else:
+ c['thread_cnt'] = int(os.cpu_count()/2)
+
+ tmpl = env.get_template('l2tp.config.tmpl')
+ config_text = tmpl.render(c)
+ open(l2tp_conf, 'w').write(config_text)
+
+ if c['authentication']['local-users']:
+ tmpl = env.get_template('chap-secrets.tmpl')
+ chap_secrets_txt = tmpl.render(c)
+ old_umask = os.umask(0o077)
+ open(chap_secrets, 'w').write(chap_secrets_txt)
+ os.umask(old_umask)
+
+ return c
- return c
def apply(c):
- if c == None:
- if os.path.exists(pidfile):
- accel_cmd('shutdown hard')
- if os.path.exists(pidfile):
- os.remove(pidfile)
- return None
-
- if not os.path.exists(pidfile):
- ret = subprocess.call(['/usr/sbin/accel-pppd','-c',l2tp_conf,'-p',pidfile,'-d'])
- chk_con()
- if ret !=0 and os.path.exists(pidfile):
- os.remove(pidfile)
- raise ConfigError('accel-pppd failed to start')
- else:
- ### if gw ip changes, only restart doesn't work
- accel_cmd('restart')
+ if c == None:
+ if os.path.exists(pidfile):
+ accel_cmd('shutdown hard')
+ if os.path.exists(pidfile):
+ os.remove(pidfile)
+ return None
+
+ if not os.path.exists(pidfile):
+ ret = subprocess.call(
+ ['/usr/sbin/accel-pppd', '-c', l2tp_conf, '-p', pidfile, '-d'])
+ chk_con()
+ if ret != 0 and os.path.exists(pidfile):
+ os.remove(pidfile)
+ raise ConfigError('accel-pppd failed to start')
+ else:
+ # if gw ip changes, only restart doesn't work
+ accel_cmd('restart')
+
if __name__ == '__main__':
- try:
- c = get_config()
- verify(c)
- generate(c)
- apply(c)
- except ConfigError as e:
- print(e)
- sys.exit(1)
+ try:
+ c = get_config()
+ verify(c)
+ generate(c)
+ apply(c)
+ except ConfigError as e:
+ print(e)
+ sys.exit(1)