diff options
Diffstat (limited to 'src/conf_mode')
| -rwxr-xr-x | src/conf_mode/wireguard.py | 229 |
1 files changed, 131 insertions, 98 deletions
diff --git a/src/conf_mode/wireguard.py b/src/conf_mode/wireguard.py index a4f876397..9848914e3 100755 --- a/src/conf_mode/wireguard.py +++ b/src/conf_mode/wireguard.py @@ -26,101 +26,98 @@ from vyos.config import Config from vyos import ConfigError dir = r'/config/auth/wireguard' -pk = dir + '/private.key' +pk = dir + '/private.key' pub = dir + '/public.key' -### check_kmod may be removed in the future, -### just want to have everything smoothly running after reboot def check_kmod(): if not os.path.exists('/sys/module/wireguard'): - sl.syslog(sl.LOG_NOTICE, "loading wirguard kmod") + sl.syslog(sl.LOG_NOTICE, "loading wirguard kmod") if os.system('sudo modprobe wireguard') != 0: sl.syslog(sl.LOG_NOTICE, "modprobe wireguard failed") raise ConfigError("modprobe wireguard failed") def get_config(): - config_data = { - 'interfaces' : {} - } - c = Config() if not c.exists('interfaces wireguard'): return None - - c.set_level('interfaces') + + c.set_level('interfaces') intfcs = c.list_nodes('wireguard') intfcs_eff = c.list_effective_nodes('wireguard') - new_lst = list( set(intfcs) - set(intfcs_eff) ) - del_lst = list( set(intfcs_eff) - set(intfcs) ) + new_lst = list(set(intfcs) - set(intfcs_eff)) + del_lst = list(set(intfcs_eff) - set(intfcs)) - ### setting deafult and determine status of the config + config_data = { + 'interfaces' : {} + } + ### setting defaults and determine status of the config for intfc in intfcs: cnf = 'wireguard ' + intfc # default data struct - config_data['interfaces'].update ( - { - intfc : { - 'addr' : '', - 'descr' : intfc, ## snmp ifAlias - 'lport' : '', - 'status' : 'exists', - 'state' : 'enabled', - 'mtu' : 1420, - 'peer' : {} - } + config_data['interfaces'].update( + { + intfc : { + 'addr' : '', + 'descr' : intfc, ## snmp ifAlias + 'lport' : '', + 'status' : 'exists', + 'state' : 'enabled', + 'mtu' : '1420', + 'peer' : {} + } } - ) + ) + ### determine status either delete or create for i in new_lst: - config_data['interfaces'][i]['status'] = 'create' + config_data['interfaces'][i]['status'] = 'create' for i in del_lst: - config_data['interfaces'].update ( - { - i : { - 'status': 'delete' + config_data['interfaces'].update( + { + i : { + 'status': 'delete' + } } - } ) - ### based on the status, set real values + ### based on the status, setup conf values for intfc in intfcs: cnf = 'wireguard ' + intfc if config_data['interfaces'][intfc]['status'] != 'delete': - #### addresses + ### addresses if c.exists(cnf + ' address'): config_data['interfaces'][intfc]['addr'] = c.return_values(cnf + ' address') ### listen port - if c.exists(cnf + ' listen-port'): - config_data['interfaces'][intfc]['lport'] = c.return_value(cnf + ' listen-port') + if c.exists(cnf + ' port'): + config_data['interfaces'][intfc]['lport'] = c.return_value(cnf + ' port') ### description if c.exists(cnf + ' description'): config_data['interfaces'][intfc]['descr'] = c.return_value(cnf + ' description') ### mtu if c.exists(cnf + ' mtu'): config_data['interfaces'][intfc]['mtu'] = c.return_value(cnf + ' mtu') - ### peers if c.exists(cnf + ' peer'): for p in c.list_nodes(cnf + ' peer'): - config_data['interfaces'][intfc]['peer'].update ( - { - p : { - 'allowed-ips' : [], - 'endpoint' : '' + config_data['interfaces'][intfc]['peer'].update( + { + p : { + 'allowed-ips' : [], + 'endpoint' : '', + 'pubkey' : '' + } } - } ) + if c.exists(cnf + ' peer ' + p + ' pubkey'): + config_data['interfaces'][intfc]['peer'][p]['pubkey'] = c.return_value(cnf + ' peer ' + p + ' pubkey') if c.exists(cnf + ' peer ' + p + ' allowed-ips'): config_data['interfaces'][intfc]['peer'][p]['allowed-ips'] = c.return_values(cnf + ' peer ' + p + ' allowed-ips') if c.exists(cnf + ' peer ' + p + ' endpoint'): config_data['interfaces'][intfc]['peer'][p]['endpoint'] = c.return_value(cnf + ' peer ' + p + ' endpoint') - - ### persistent-keepalive - if c.exists(cnf + ' peer ' + p + ' persistent-keepalive'): - config_data['interfaces'][intfc]['peer'][p]['persistent-keepalive'] = c.return_value(cnf + ' peer ' + p + ' persistent-keepalive') + if c.exists(cnf + ' peer ' + p + ' persistent-keepalive'): + config_data['interfaces'][intfc]['peer'][p]['persistent-keepalive'] = c.return_value(cnf + ' peer ' + p + ' persistent-keepalive') - #print (config_data) return config_data def verify(c): @@ -130,34 +127,31 @@ def verify(c): for i in c['interfaces']: if c['interfaces'][i]['status'] != 'delete': if not c['interfaces'][i]['addr']: - raise ConfigError("address required for interface " + i) - if not c['interfaces'][i]['lport']: - raise ConfigError("listen-port required for interface " + i) + raise ConfigError("address required for interface " + i) if not c['interfaces'][i]['peer']: raise ConfigError("peer required on interface " + i) - else: - for p in c['interfaces'][i]['peer']: - if not c['interfaces'][i]['peer'][p]['allowed-ips']: - raise ConfigError("allowed-ips required on interface " + i + " for peer " + p) - ### eventually check allowed-ips (if it's an ip and valid CIDR or so) - ### endpoint needs to be IP:port + for p in c['interfaces'][i]['peer']: + if not c['interfaces'][i]['peer'][p]['allowed-ips']: + raise ConfigError("allowed-ips required on interface " + i + " for peer " + p) + if not c['interfaces'][i]['peer'][p]['pubkey']: + raise ConfigError("pubkey from your peer is mandatory on " + i + " for peer " + p) + def apply(c): ### no wg config left, delete all wireguard devices on the os if not c: net_devs = os.listdir('/sys/class/net/') for dev in net_devs: - buf = open('/sys/class/net/' + dev + '/uevent','r').read() + buf = open('/sys/class/net/' + dev + '/uevent', 'r').read() if re.search("DEVTYPE=wireguard", buf, re.I|re.M): - wg_intf = re.sub("INTERFACE=","", re.search("INTERFACE=.*", buf, re.I|re.M).group(0) ) + wg_intf = re.sub("INTERFACE=", "", re.search("INTERFACE=.*", buf, re.I|re.M).group(0)) sl.syslog(sl.LOG_NOTICE, "removing interface " + wg_intf) subprocess.call(['ip l d dev ' + wg_intf + ' >/dev/null'], shell=True) return None - + ### - ## to find the diffs between old config an new config - ## so we only configure/delete what was not previously configured + ## find the diffs between effective config an new config ### c_eff = Config() c_eff.set_level('interfaces wireguard') @@ -175,88 +169,129 @@ def apply(c): subprocess.call(['ip l a dev ' + intf + ' type wireguard 2>/dev/null'], shell=True) for addr in c['interfaces'][intf]['addr']: - add_addr(intf, addr) - configure_interface(c,intf) - subprocess.call(['ip l set up dev ' + intf + ' &>/dev/null'], shell=True) + add_addr(intf, addr) + + subprocess.call(['ip l set up dev ' + intf + ' mtu ' + c['interfaces'][intf]['mtu'] + ' &>/dev/null'], shell=True) + configure_interface(c, intf) ### config updates if c['interfaces'][intf]['status'] == 'exists': ### IP address change - addr_eff = re.sub("\'", "", c_eff.return_effective_values(intf + ' address')).split() - addr_rem = list( set(addr_eff) - set(c['interfaces'][intf]['addr']) ) - addr_add = list( set(c['interfaces'][intf]['addr']) - set(addr_eff) ) + addr_eff = re.sub("\'", "", c_eff.return_effective_values(intf + ' address')).split() + addr_rem = list(set(addr_eff) - set(c['interfaces'][intf]['addr'])) + addr_add = list(set(c['interfaces'][intf]['addr']) - set(addr_eff)) - if len(addr_rem) !=0: + if len(addr_rem) != 0: for addr in addr_rem: del_addr(intf, addr) - if len(addr_add) !=0: + if len(addr_add) != 0: for addr in addr_add: add_addr(intf, addr) - ### persistent-keepalive + ## mtu update + mtu = c['interfaces'][intf]['mtu'] + if mtu != 1420: + sl.syslog(sl.LOG_NOTICE, "setting mtu to " + mtu + " on " + intf) + subprocess.call(['ip l set mtu ' + mtu + ' dev ' + intf + ' &>/dev/null'], shell=True) + + ### persistent-keepalive for p in c_eff.list_nodes(intf + ' peer'): val_eff = "" - val = "" + val = "" if c_eff.exists_effective(intf + ' peer ' + p + ' persistent-keepalive'): val_eff = c_eff.return_effective_value(intf + ' peer ' + p + ' persistent-keepalive') if 'persistent-keepalive' in c['interfaces'][intf]['peer'][p]: val = c['interfaces'][intf]['peer'][p]['persistent-keepalive'] - + ### disable keepalive if val_eff and not val: - c['interfaces'][intf]['peer'][p]['persistent-keepalive'] = 0 - + c['interfaces'][intf]['peer'][p]['persistent-keepalive'] = 0 + ### set new keepalive value if not val_eff and val: c['interfaces'][intf]['peer'][p]['persistent-keepalive'] = val ## wg command call - configure_interface(c,intf) + configure_interface(c, intf) - ### ifalias for snmp from description + ### ifalias for snmp from description descr_eff = c_eff.return_effective_value(intf + ' description') cnf_descr = c['interfaces'][intf]['descr'] if descr_eff != cnf_descr: - open('/sys/class/net/' + str(intf) + '/ifalias','w').write(str(cnf_descr)) + with open('/sys/class/net/' + str(intf) + '/ifalias', 'w') as fh: + fh.write(str(cnf_descr)) def configure_interface(c, intf): + wg_config = { + 'interface' : intf, + 'port' : 0, + 'private-key' : '/config/auth/wireguard/private.key', + 'peer' : + { + 'pubkey' : '' + }, + 'allowed-ips' : [], + 'fwmark' : 0x00, + 'endpoint' : None, + 'keepalive' : 0 + + } + for p in c['interfaces'][intf]['peer']: - cmd = "wg set " + intf + \ - " listen-port " + c['interfaces'][intf]['lport'] + \ - " private-key " + pk + \ - " peer " + p + ## mandatory settings + wg_config['peer']['pubkey'] = c['interfaces'][intf]['peer'][p]['pubkey'] + wg_config['allowed-ips'] = c['interfaces'][intf]['peer'][p]['allowed-ips'] + + ## optional settings + # listen-port + if c['interfaces'][intf]['lport']: + wg_config['port'] = c['interfaces'][intf]['lport'] + + ## endpoint + if c['interfaces'][intf]['peer'][p]['endpoint']: + wg_config['endpoint'] = c['interfaces'][intf]['peer'][p]['endpoint'] + + ## persistent-keepalive + if 'persistent-keepalive' in c['interfaces'][intf]['peer'][p]: + wg_config['keepalive'] = c['interfaces'][intf]['peer'][p]['persistent-keepalive'] + + ### assemble wg command + cmd = "sudo wg set " + intf + cmd += " listen-port " + str(wg_config['port']) + cmd += " private-key " + wg_config['private-key'] + cmd += " peer " + wg_config['peer']['pubkey'] cmd += " allowed-ips " + for ap in wg_config['allowed-ips']: + if ap != wg_config['allowed-ips'][-1]: + cmd += ap + "," + else: + cmd += ap - for ap in c['interfaces'][intf]['peer'][p]['allowed-ips']: - if ap != c['interfaces'][intf]['peer'][p]['allowed-ips'][-1]: - cmd += ap + "," - else: - cmd += ap - - ## endpoint is only required if wg runs as client - if c['interfaces'][intf]['peer'][p]['endpoint']: - cmd += " endpoint " + c['interfaces'][intf]['peer'][p]['endpoint'] + if wg_config['endpoint']: + cmd += " endpoint " + wg_config['endpoint'] - if 'persistent-keepalive' in c['interfaces'][intf]['peer'][p]: - cmd += " persistent-keepalive " + str( c['interfaces'][intf]['peer'][p]['persistent-keepalive']) + if wg_config['keepalive'] != 0: + cmd += " persistent-keepalive " + wg_config['keepalive'] + else: + cmd += " persistent-keepalive 0" - sl.syslog(sl.LOG_NOTICE, "sudo " + cmd) - subprocess.call([ 'sudo ' + cmd], shell=True) + sl.syslog(sl.LOG_NOTICE, cmd) + subprocess.call([cmd], shell=True) def add_addr(intf, addr): ret = subprocess.call(['ip a a dev ' + intf + ' ' + addr + ' &>/dev/null'], shell=True) if ret != 0: - raise ConfigError('Can\'t set IP ' + addr + ' on ' + intf ) + raise ConfigError('Can\'t set IP ' + addr + ' on ' + intf) else: sl.syslog(sl.LOG_NOTICE, "ip a a dev " + intf + " " + addr) def del_addr(intf, addr): ret = subprocess.call(['ip a d dev ' + intf + ' ' + addr + ' &>/dev/null'], shell=True) if ret != 0: - raise ConfigError('Can\'t delete IP ' + addr + ' on ' + intf ) + raise ConfigError('Can\'t delete IP ' + addr + ' on ' + intf) else: sl.syslog(sl.LOG_NOTICE, "ip a d dev " + intf + " " + addr) @@ -265,9 +300,7 @@ if __name__ == '__main__': check_kmod() c = get_config() verify(c) - #generate(c) apply(c) except ConfigError as e: print(e) sys.exit(1) - |