diff options
Diffstat (limited to 'src/conf_mode')
| -rwxr-xr-x | src/conf_mode/accel_pptp.py | 110 |
1 files changed, 51 insertions, 59 deletions
diff --git a/src/conf_mode/accel_pptp.py b/src/conf_mode/accel_pptp.py index 5741631b3..050ab045c 100755 --- a/src/conf_mode/accel_pptp.py +++ b/src/conf_mode/accel_pptp.py @@ -32,7 +32,6 @@ pidfile = r'/var/run/accel_pptp.pid' pptp_cnf_dir = r'/etc/accel-ppp/pptp' chap_secrets = pptp_cnf_dir + '/chap-secrets' pptp_conf = pptp_cnf_dir + '/pptp.config' -# accel-pppd -d -c /etc/accel-ppp/pppoe/pppoe.config -p /var/run/accel_pppoe.pid ### config path creation if not os.path.exists(pptp_cnf_dir): @@ -137,14 +136,8 @@ chap_secrets_conf = ''' {% endif %} {% endfor %} ''' -### -# inline helper functions -### -# depending on hw and threads, daemon needs a little to start -# if it takes longer than 100 * 0.5 secs, exception is being raised -# not sure if that's the best way to check it, but it worked so far quite well -### -def chk_con(): + +def _chk_con(): cnt = 0 s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) while True: @@ -159,7 +152,7 @@ def chk_con(): break ### chap_secrets file if auth mode local -def write_chap_secrets(c): +def _write_chap_secrets(c): tmpl = jinja2.Template(chap_secrets_conf, trim_blocks=True) chap_secrets_txt = tmpl.render(c) old_umask = os.umask(0o077) @@ -167,7 +160,7 @@ def write_chap_secrets(c): os.umask(old_umask) sl.syslog(sl.LOG_NOTICE, chap_secrets + ' written') -def accel_cmd(cmd=''): +def _accel_cmd(cmd=''): if not cmd: return None try: @@ -182,10 +175,10 @@ def accel_cmd(cmd=''): def get_config(): c = Config() - if not c.exists('vpn pptp remote-access '): + if not c.exists(['vpn', 'pptp', 'remote-access']): return None - c.set_level('vpn pptp remote-access') + c.set_level(['vpn', 'pptp', 'remote-access']) config_data = { 'authentication' : { 'mode' : 'local', @@ -204,21 +197,21 @@ def get_config(): ### general options ### - if c.exists('dns-servers server-1'): - config_data['dns'].append( c.return_value('dns-servers server-1')) - if c.exists('dns-servers server-2'): - config_data['dns'].append( c.return_value('dns-servers server-2')) - if c.exists('wins-servers server-1'): - config_data['wins'].append( c.return_value('wins-servers server-1')) - if c.exists('wins-servers server-2'): - config_data['wins'].append( c.return_value('wins-servers server-2')) - if c.exists('outside-address'): - config_data['outside_addr'] = c.return_value('outside-address') + if c.exists(['dns-servers', 'server-1']): + config_data['dns'].append( c.return_value(['dns-servers', 'server-1'])) + if c.exists(['dns-servers', 'server-2']): + config_data['dns'].append( c.return_value(['dns-servers', 'server-2'])) + if c.exists(['wins-servers', 'server-1']): + config_data['wins'].append( c.return_value(['wins-servers', 'server-1'])) + if c.exists(['wins-servers', 'server-2']): + config_data['wins'].append( c.return_value(['wins-servers', 'server-2'])) + if c.exists(['outside-address']): + config_data['outside_addr'] = c.return_value(['outside-address']) ### auth local - if c.exists('authentication mode local'): - if c.exists('authentication local-users username'): - for usr in c.list_nodes('authentication local-users username'): + if c.exists(['authentication', 'mode', 'local']): + if c.exists(['authentication', 'local-users', 'username']): + for usr in c.list_nodes(['authentication', 'local-users', 'username']): config_data['authentication']['local-users'].update( { usr : { @@ -229,65 +222,64 @@ def get_config(): } ) - if c.exists('authentication local-users username ' + usr + ' password'): - config_data['authentication']['local-users'][usr]['passwd'] = c.return_value('authentication local-users username ' + usr + ' password') - if c.exists('authentication local-users username ' + usr + ' disable'): + if c.exists(['authentication', 'local-users', 'username', usr, 'password']): + config_data['authentication']['local-users'][usr]['passwd'] = c.return_value(['authentication', 'local-users', 'username', usr, 'password']) + if c.exists(['authentication', 'local-users', 'username', usr, 'disable']): config_data['authentication']['local-users'][usr]['state'] = 'disable' - if c.exists('authentication local-users username ' + usr + ' static-ip'): - config_data['authentication']['local-users'][usr]['ip'] = c.return_value('authentication local-users username ' + usr + ' static-ip') + if c.exists(['authentication', 'local-users', 'username', usr, 'static-ip']): + config_data['authentication']['local-users'][usr]['ip'] = c.return_value(['authentication', 'local-users', 'username', usr, 'static-ip']) ### authentication mode radius servers and settings - if c.exists('authentication mode radius'): + if c.exists(['authentication', 'mode', 'radius']): config_data['authentication']['mode'] = 'radius' - rsrvs = c.list_nodes('authentication radius server') + rsrvs = c.list_nodes(['authentication', 'radius', 'server']) for rsrv in rsrvs: - if c.return_value('authentication radius server ' + rsrv + ' fail-time') == None: + if not c.return_value(['authentication', 'radius', 'server', rsrv, 'fail-time']): ftime = '0' else: - ftime = str(c.return_value('authentication radius server ' + rsrv + ' fail-time')) - if c.return_value('authentication radius-server ' + rsrv + ' req-limit') == None: + ftime = c.return_value(['authentication', 'radius', 'server', rsrv, 'fail-time']) + if not c.return_value(['authentication', 'radius-server', rsrv, 'req-limit']): reql = '0' else: - reql = str(c.return_value('authentication radius server ' + rsrv + ' req-limit')) + reql = c.return_value(['authentication', 'radius', 'server', rsrv, 'req-limit']) config_data['authentication']['radiussrv'].update( { rsrv : { - 'secret' : c.return_value('authentication radius server ' + rsrv + ' key'), + 'secret' : c.return_value(['authentication', 'radius', 'server', rsrv, 'key']), 'fail-time' : ftime, 'req-limit' : reql } } ) - if c.exists('client-ip-pool'): - if c.exists('client-ip-pool start'): - config_data['client_ip_pool'] = c.return_value('client-ip-pool start') - if c.exists('client-ip-pool stop'): - config_data['client_ip_pool'] += '-' + re.search('[0-9]+$', c.return_value('client-ip-pool stop')).group(0) - if c.exists('mtu'): - config_data['mtu'] = c.return_value('mtu') - + if c.exists(['client-ip-pool']): + if c.exists(['client-ip-pool', 'start']): + config_data['client_ip_pool'] = c.return_value(['client-ip-pool', 'start']) + if c.exists(['client-ip-pool', 'stop']): + config_data['client_ip_pool'] += '-' + re.search('[0-9]+$', c.return_value(['client-ip-pool', 'stop'])).group(0) + if c.exists(['mtu']): + config_data['mtu'] = c.return_value(['mtu']) ### gateway address - if c.exists('gateway-address'): - config_data['gw_ip'] = c.return_value('gateway-address') + if c.exists(['gateway-address']): + config_data['gw_ip'] = c.return_value(['gateway-address']) else: config_data['gw_ip'] = re.sub('[0-9]+$','1',config_data['client_ip_pool']) - if c.exists('authentication require'): - if c.return_value('authentication require') == 'pap': + if c.exists(['authentication', 'require']): + if c.return_value(['authentication', 'require']) == 'pap': config_data['authentication']['auth_proto'] = 'auth_pap' - if c.return_value('authentication require') == 'chap': + if c.return_value(['authentication', 'require']) == 'chap': config_data['authentication']['auth_proto'] = 'auth_chap_md5' - if c.return_value('authentication require') == 'mschap': + if c.return_value(['authentication', 'require']) == 'mschap': config_data['authentication']['auth_proto'] = 'auth_mschap_v1' - if c.return_value('authentication require') == 'mschap-v2': + if c.return_value(['authentication', 'require']) == 'mschap-v2': config_data['authentication']['auth_proto'] = 'auth_mschap_v2' - if c.exists('authentication mppe'): - config_data['authentication']['mppe'] = c.return_value('authentication mppe') + if c.exists(['authentication', 'mppe']): + config_data['authentication']['mppe'] = c.return_value(['authentication', 'mppe']) return config_data @@ -330,27 +322,27 @@ def generate(c): open(pptp_conf,'w').write(config_text) if c['authentication']['local-users']: - write_chap_secrets(c) + _write_chap_secrets(c) return c def apply(c): if c == None: if os.path.exists(pidfile): - accel_cmd('shutdown hard') + _accel_cmd('shutdown hard') if os.path.exists(pidfile): os.remove(pidfile) return None if not os.path.exists(pidfile): ret = subprocess.call(['/usr/sbin/accel-pppd','-c',pptp_conf,'-p',pidfile,'-d']) - chk_con() + _chk_con() if ret !=0 and os.path.exists(pidfile): os.remove(pidfile) raise ConfigError('accel-pppd failed to start') else: ### if gw ip changes, only restart doesn't work - accel_cmd('restart') + _accel_cmd('restart') sl.syslog(sl.LOG_NOTICE, "reloading config via daemon restart") if __name__ == '__main__': |