diff options
Diffstat (limited to 'src/conf_mode')
| -rwxr-xr-x | src/conf_mode/interfaces-wireless.py | 686 |
1 files changed, 140 insertions, 546 deletions
diff --git a/src/conf_mode/interfaces-wireless.py b/src/conf_mode/interfaces-wireless.py index 0162b642c..42b55ee6a 100755 --- a/src/conf_mode/interfaces-wireless.py +++ b/src/conf_mode/interfaces-wireless.py @@ -15,497 +15,169 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. import os + from sys import exit from re import findall - from copy import deepcopy - -from netifaces import interfaces from netaddr import EUI, mac_unix_expanded from vyos.config import Config -from vyos.configdict import list_diff, intf_to_dict, add_to_dict, interface_default_data -from vyos.ifconfig import WiFiIf, Section -from vyos.ifconfig_vlan import apply_all_vlans, verify_vlan_config +from vyos.configdict import get_interface_dict +from vyos.configdict import dict_merge +from vyos.configverify import verify_address +from vyos.configverify import verify_bridge_delete +from vyos.configverify import verify_dhcpv6 +from vyos.configverify import verify_source_interface +from vyos.configverify import verify_vlan_config +from vyos.configverify import verify_vrf +from vyos.ifconfig import WiFiIf from vyos.template import render -from vyos.util import chown, call -from vyos.validate import is_member +from vyos.util import call from vyos import ConfigError - from vyos import airbag airbag.enable() -default_config_data = { - **interface_default_data, - 'cap_ht' : False, - 'cap_ht_40mhz_incapable' : False, - 'cap_ht_powersave' : False, - 'cap_ht_chan_set_width' : '', - 'cap_ht_delayed_block_ack' : False, - 'cap_ht_dsss_cck_40' : False, - 'cap_ht_greenfield' : False, - 'cap_ht_ldpc' : False, - 'cap_ht_lsig_protection' : False, - 'cap_ht_max_amsdu' : '', - 'cap_ht_short_gi' : [], - 'cap_ht_smps' : '', - 'cap_ht_stbc_rx' : '', - 'cap_ht_stbc_tx' : False, - 'cap_req_ht' : False, - 'cap_req_vht' : False, - 'cap_vht' : False, - 'cap_vht_antenna_cnt' : '', - 'cap_vht_antenna_fixed' : False, - 'cap_vht_beamform' : '', - 'cap_vht_center_freq_1' : '', - 'cap_vht_center_freq_2' : '', - 'cap_vht_chan_set_width' : '', - 'cap_vht_ldpc' : False, - 'cap_vht_link_adaptation' : '', - 'cap_vht_max_mpdu_exp' : '', - 'cap_vht_max_mpdu' : '', - 'cap_vht_short_gi' : [], - 'cap_vht_stbc_rx' : '', - 'cap_vht_stbc_tx' : False, - 'cap_vht_tx_powersave' : False, - 'cap_vht_vht_cf' : False, - 'channel': '', - 'country_code': '', - 'deleted': False, - 'disable_broadcast_ssid' : False, - 'disable_link_detect' : 1, - 'expunge_failing_stations' : False, - 'hw_id' : '', - 'intf': '', - 'isolate_stations' : False, - 'max_stations' : '', - 'mgmt_frame_protection' : 'disabled', - 'mode' : 'g', - 'phy' : '', - 'reduce_transmit_power' : '', - 'sec_wep' : False, - 'sec_wep_key' : [], - 'sec_wpa' : False, - 'sec_wpa_cipher' : [], - 'sec_wpa_mode' : 'both', - 'sec_wpa_passphrase' : '', - 'sec_wpa_radius' : [], - 'ssid' : '', - 'op_mode' : 'monitor', - 'vif': {}, - 'vif_remove': [], - 'vif_s': {}, - 'vif_s_remove': [] -} - # XXX: wpa_supplicant works on the source interface -wpa_suppl_conf = '/run/wpa_supplicant/{intf}.conf' -hostapd_conf = '/run/hostapd/{intf}.conf' +wpa_suppl_conf = '/run/wpa_supplicant/{ifname}.conf' +hostapd_conf = '/run/hostapd/{ifname}.conf' + +def find_other_stations(conf, base, ifname): + """ + Only one wireless interface per phy can be in station mode - + find all interfaces attached to a phy which run in station mode + """ + old_level = conf.get_level() + conf.set_level(base) + dict = {} + for phy in os.listdir('/sys/class/ieee80211'): + list = [] + for interface in conf.list_nodes([]): + if interface == ifname: + continue + # the following node is mandatory + if conf.exists([interface, 'physical-device', phy]): + tmp = conf.return_value([interface, 'type']) + if tmp == 'station': + list.append(interface) + if list: + dict.update({phy: list}) + conf.set_level(old_level) + return dict def get_config(): + """ + Retrive CLI config as dictionary. Dictionary can never be empty, as at least the + interface name will be added or a deleted flag + """ + conf = Config() + base = ['interfaces', 'wireless'] + # determine tagNode instance if 'VYOS_TAGNODE_VALUE' not in os.environ: raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified') ifname = os.environ['VYOS_TAGNODE_VALUE'] - conf = Config() - - # check if wireless interface has been removed - cfg_base = ['interfaces', 'wireless ', ifname] - if not conf.exists(cfg_base): - wifi = deepcopy(default_config_data) - wifi['intf'] = ifname - wifi['deleted'] = True - # we need to know if we're a bridge member so we can refuse deletion - wifi['is_bridge_member'] = is_member(conf, wifi['intf'], 'bridge') - # we can not bail out early as wireless interface can not be removed - # Kernel will complain with: RTNETLINK answers: Operation not supported. - # Thus we need to remove individual settings - return wifi - - # set new configuration level - conf.set_level(cfg_base) - - # get common interface settings - wifi, disabled = intf_to_dict(conf, default_config_data) - - # 40MHz intolerance, use 20MHz only - if conf.exists('capabilities ht 40mhz-incapable'): - wifi['cap_ht'] = True - wifi['cap_ht_40mhz_incapable'] = True - - # WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD] - if conf.exists('capabilities ht auto-powersave'): - wifi['cap_ht'] = True - wifi['cap_ht_powersave'] = True - - # Supported channel set width - if conf.exists('capabilities ht channel-set-width'): - wifi['cap_ht'] = True - wifi['cap_ht_chan_set_width'] = conf.return_values('capabilities ht channel-set-width') - - # HT-delayed Block Ack - if conf.exists('capabilities ht delayed-block-ack'): - wifi['cap_ht'] = True - wifi['cap_ht_delayed_block_ack'] = True - - # DSSS/CCK Mode in 40 MHz - if conf.exists('capabilities ht dsss-cck-40'): - wifi['cap_ht'] = True - wifi['cap_ht_dsss_cck_40'] = True - - # HT-greenfield capability - if conf.exists('capabilities ht greenfield'): - wifi['cap_ht'] = True - wifi['cap_ht_greenfield'] = True - - # LDPC coding capability - if conf.exists('capabilities ht ldpc'): - wifi['cap_ht'] = True - wifi['cap_ht_ldpc'] = True - - # L-SIG TXOP protection capability - if conf.exists('capabilities ht lsig-protection'): - wifi['cap_ht'] = True - wifi['cap_ht_lsig_protection'] = True - - # Set Maximum A-MSDU length - if conf.exists('capabilities ht max-amsdu'): - wifi['cap_ht'] = True - wifi['cap_ht_max_amsdu'] = conf.return_value('capabilities ht max-amsdu') - - # Short GI capabilities - if conf.exists('capabilities ht short-gi'): - wifi['cap_ht'] = True - wifi['cap_ht_short_gi'] = conf.return_values('capabilities ht short-gi') - - # Spatial Multiplexing Power Save (SMPS) settings - if conf.exists('capabilities ht smps'): - wifi['cap_ht'] = True - wifi['cap_ht_smps'] = conf.return_value('capabilities ht smps') - - # Support for receiving PPDU using STBC (Space Time Block Coding) - if conf.exists('capabilities ht stbc rx'): - wifi['cap_ht'] = True - wifi['cap_ht_stbc_rx'] = conf.return_value('capabilities ht stbc rx') - - # Support for sending PPDU using STBC (Space Time Block Coding) - if conf.exists('capabilities ht stbc tx'): - wifi['cap_ht'] = True - wifi['cap_ht_stbc_tx'] = True - - # Require stations to support HT PHY (reject association if they do not) - if conf.exists('capabilities require-ht'): - wifi['cap_req_ht'] = True - - # Require stations to support VHT PHY (reject association if they do not) - if conf.exists('capabilities require-vht'): - wifi['cap_req_vht'] = True - - # Number of antennas on this card - if conf.exists('capabilities vht antenna-count'): - wifi['cap_vht'] = True - wifi['cap_vht_antenna_cnt'] = conf.return_value('capabilities vht antenna-count') - - # set if antenna pattern does not change during the lifetime of an association - if conf.exists('capabilities vht antenna-pattern-fixed'): - wifi['cap_vht'] = True - wifi['cap_vht_antenna_fixed'] = True - - # Beamforming capabilities - if conf.exists('capabilities vht beamform'): - wifi['cap_vht'] = True - wifi['cap_vht_beamform'] = conf.return_values('capabilities vht beamform') - - # VHT operating channel center frequency - center freq 1 (for use with 80, 80+80 and 160 modes) - if conf.exists('capabilities vht center-channel-freq freq-1'): - wifi['cap_vht'] = True - wifi['cap_vht_center_freq_1'] = conf.return_value('capabilities vht center-channel-freq freq-1') - - # VHT operating channel center frequency - center freq 2 (for use with the 80+80 mode) - if conf.exists('capabilities vht center-channel-freq freq-2'): - wifi['cap_vht'] = True - wifi['cap_vht_center_freq_2'] = conf.return_value('capabilities vht center-channel-freq freq-2') - - # VHT operating Channel width - if conf.exists('capabilities vht channel-set-width'): - wifi['cap_vht'] = True - wifi['cap_vht_chan_set_width'] = conf.return_value('capabilities vht channel-set-width') - - # LDPC coding capability - if conf.exists('capabilities vht ldpc'): - wifi['cap_vht'] = True - wifi['cap_vht_ldpc'] = True - - # VHT link adaptation capabilities - if conf.exists('capabilities vht link-adaptation'): - wifi['cap_vht'] = True - wifi['cap_vht_link_adaptation'] = conf.return_value('capabilities vht link-adaptation') - - # Set the maximum length of A-MPDU pre-EOF padding that the station can receive - if conf.exists('capabilities vht max-mpdu-exp'): - wifi['cap_vht'] = True - wifi['cap_vht_max_mpdu_exp'] = conf.return_value('capabilities vht max-mpdu-exp') - - # Increase Maximum MPDU length - if conf.exists('capabilities vht max-mpdu'): - wifi['cap_vht'] = True - wifi['cap_vht_max_mpdu'] = conf.return_value('capabilities vht max-mpdu') - - # Increase Maximum MPDU length - if conf.exists('capabilities vht short-gi'): - wifi['cap_vht'] = True - wifi['cap_vht_short_gi'] = conf.return_values('capabilities vht short-gi') - - # Support for receiving PPDU using STBC (Space Time Block Coding) - if conf.exists('capabilities vht stbc rx'): - wifi['cap_vht'] = True - wifi['cap_vht_stbc_rx'] = conf.return_value('capabilities vht stbc rx') - - # Support for the transmission of at least 2x1 STBC (Space Time Block Coding) - if conf.exists('capabilities vht stbc tx'): - wifi['cap_vht'] = True - wifi['cap_vht_stbc_tx'] = True - - # Support for VHT TXOP Power Save Mode - if conf.exists('capabilities vht tx-powersave'): - wifi['cap_vht'] = True - wifi['cap_vht_tx_powersave'] = True - - # STA supports receiving a VHT variant HT Control field - if conf.exists('capabilities vht vht-cf'): - wifi['cap_vht'] = True - wifi['cap_vht_vht_cf'] = True - - # Wireless radio channel - if conf.exists('channel'): - wifi['channel'] = conf.return_value('channel') - - # Disable broadcast of SSID from access-point - if conf.exists('disable-broadcast-ssid'): - wifi['disable_broadcast_ssid'] = True - - # Disassociate stations based on excessive transmission failures - if conf.exists('expunge-failing-stations'): - wifi['expunge_failing_stations'] = True - - # retrieve real hardware address - if conf.exists('hw-id'): - wifi['hw_id'] = conf.return_value('hw-id') - - # Isolate stations on the AP so they cannot see each other - if conf.exists('isolate-stations'): - wifi['isolate_stations'] = True - - # Wireless physical device - if conf.exists('physical-device'): - wifi['phy'] = conf.return_value('physical-device') - - # Maximum number of wireless radio stations - if conf.exists('max-stations'): - wifi['max_stations'] = conf.return_value('max-stations') - - # Management Frame Protection (MFP) according to IEEE 802.11w - if conf.exists('mgmt-frame-protection'): - wifi['mgmt_frame_protection'] = conf.return_value('mgmt-frame-protection') - - # Wireless radio mode - if conf.exists('mode'): - wifi['mode'] = conf.return_value('mode') - - # Transmission power reduction in dBm - if conf.exists('reduce-transmit-power'): - wifi['reduce_transmit_power'] = conf.return_value('reduce-transmit-power') - - # WEP enabled? - if conf.exists('security wep'): - wifi['sec_wep'] = True - - # WEP encryption key(s) - if conf.exists('security wep key'): - wifi['sec_wep_key'] = conf.return_values('security wep key') - - # WPA enabled? - if conf.exists('security wpa'): - wifi['sec_wpa'] = True - - # WPA Cipher suite - if conf.exists('security wpa cipher'): - wifi['sec_wpa_cipher'] = conf.return_values('security wpa cipher') - - # WPA mode - if conf.exists('security wpa mode'): - wifi['sec_wpa_mode'] = conf.return_value('security wpa mode') - - # WPA default ciphers depend on WPA mode - if not wifi['sec_wpa_cipher']: - if wifi['sec_wpa_mode'] == 'wpa': - wifi['sec_wpa_cipher'].append('TKIP') - wifi['sec_wpa_cipher'].append('CCMP') - - elif wifi['sec_wpa_mode'] == 'wpa2': - wifi['sec_wpa_cipher'].append('CCMP') - - elif wifi['sec_wpa_mode'] == 'both': - wifi['sec_wpa_cipher'].append('CCMP') - wifi['sec_wpa_cipher'].append('TKIP') - - # WPA Group Cipher suite - if conf.exists('security wpa group-cipher'): - wifi['sec_wpa_group_cipher'] = conf.return_values('security wpa group-cipher') - - # WPA personal shared pass phrase - if conf.exists('security wpa passphrase'): - wifi['sec_wpa_passphrase'] = conf.return_value('security wpa passphrase') - - # WPA RADIUS source address - if conf.exists('security wpa radius source-address'): - wifi['sec_wpa_radius_source'] = conf.return_value('security wpa radius source-address') - - # WPA RADIUS server - for server in conf.list_nodes('security wpa radius server'): - # set new configuration level - conf.set_level(cfg_base + ' security wpa radius server ' + server) - radius = { - 'server' : server, - 'acc_port' : '', - 'disabled': False, - 'port' : 1812, - 'key' : '' - } - - # RADIUS server port - if conf.exists('port'): - radius['port'] = int(conf.return_value('port')) - - # receive RADIUS accounting info - if conf.exists('accounting'): - radius['acc_port'] = radius['port'] + 1 - - # Check if RADIUS server was temporary disabled - if conf.exists(['disable']): - radius['disabled'] = True - - # RADIUS server shared-secret - if conf.exists('key'): - radius['key'] = conf.return_value('key') - - # append RADIUS server to list of servers - wifi['sec_wpa_radius'].append(radius) - - # re-set configuration level to parse new nodes - conf.set_level(cfg_base) - - # Wireless access-point service set identifier (SSID) - if conf.exists('ssid'): - wifi['ssid'] = conf.return_value('ssid') - - # Wireless device type for this interface - if conf.exists('type'): - tmp = conf.return_value('type') - if tmp == 'access-point': - tmp = 'ap' - - wifi['op_mode'] = tmp + wifi = get_interface_dict(conf, base, ifname) + + if 'security' in wifi and 'wpa' in wifi['security']: + wpa_cipher = wifi['security']['wpa'].get('cipher') + wpa_mode = wifi['security']['wpa'].get('mode') + if not wpa_cipher: + tmp = None + if wpa_mode == 'wpa': + tmp = {'security': {'wpa': {'cipher' : ['TKIP', 'CCMP']}}} + elif wpa_mode == 'wpa2': + tmp = {'security': {'wpa': {'cipher' : ['CCMP']}}} + elif wpa_mode == 'both': + tmp = {'security': {'wpa': {'cipher' : ['CCMP', 'TKIP']}}} + + if tmp: wifi = dict_merge(tmp, wifi) # retrieve configured regulatory domain - conf.set_level('system') - if conf.exists('wifi-regulatory-domain'): - wifi['country_code'] = conf.return_value('wifi-regulatory-domain') + conf.set_level(['system']) + if conf.exists(['wifi-regulatory-domain']): + wifi['country_code'] = conf.return_value(['wifi-regulatory-domain']) - return wifi + # Only one wireless interface per phy can be in station mode + tmp = find_other_stations(conf, base, wifi['ifname']) + if tmp: wifi['station_interfaces'] = tmp + return wifi def verify(wifi): - if wifi['deleted']: - if wifi['is_bridge_member']: - raise ConfigError(( - f'Cannot delete interface "{wifi["intf"]}" as it is a ' - f'member of bridge "{wifi["is_bridge_member"]}"!')) - + if 'deleted' in wifi: + verify_bridge_delete(wifi) return None - if wifi['op_mode'] != 'monitor' and not wifi['ssid']: - raise ConfigError('SSID must be set for {}'.format(wifi['intf'])) - - if not wifi['phy']: - raise ConfigError('You must specify physical-device') + if 'physical_device' not in wifi: + raise ConfigError('You must specify a physical-device "phy"') - if not wifi['mode']: + if 'type' not in wifi: raise ConfigError('You must specify a WiFi mode') - if wifi['op_mode'] == 'ap': - c = Config() - if not c.exists('system wifi-regulatory-domain'): - raise ConfigError('Wireless regulatory domain is mandatory,\n' \ - 'use "set system wifi-regulatory-domain".') - - if not wifi['channel']: - raise ConfigError('Channel must be set for {}'.format(wifi['intf'])) + if 'ssid' not in wifi and wifi['type'] != 'monitor': + raise ConfigError('SSID must be configured') - if len(wifi['sec_wep_key']) > 4: - raise ConfigError('No more then 4 WEP keys configurable') - - if wifi['cap_vht'] and not wifi['cap_ht']: - raise ConfigError('Specify HT flags if you want to use VHT!') - - if wifi['cap_vht_beamform'] and wifi['cap_vht_antenna_cnt'] == 1: - raise ConfigError('Cannot use beam forming with just one antenna!') - - if wifi['cap_vht_beamform'] == 'single-user-beamformer' and wifi['cap_vht_antenna_cnt'] < 3: - # Nasty Gotcha: see https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf lines 692-705 - raise ConfigError('Single-user beam former requires at least 3 antennas!') - - if wifi['sec_wep'] and (len(wifi['sec_wep_key']) == 0): - raise ConfigError('Missing WEP keys') - - if wifi['sec_wpa'] and not (wifi['sec_wpa_passphrase'] or wifi['sec_wpa_radius']): - raise ConfigError('Misssing WPA key or RADIUS server') - - for radius in wifi['sec_wpa_radius']: - if not radius['key']: - raise ConfigError('Misssing RADIUS shared secret key for server: {}'.format(radius['server'])) - - if ( wifi['is_bridge_member'] - and ( wifi['address'] - or wifi['ipv6_eui64_prefix'] - or wifi['ipv6_autoconf'] ) ): - raise ConfigError(( - f'Cannot assign address to interface "{wifi["intf"]}" ' - f'as it is a member of bridge "{wifi["is_bridge_member"]}"!')) - - if wifi['vrf']: - if wifi['vrf'] not in interfaces(): - raise ConfigError(f'VRF "{wifi["vrf"]}" does not exist') - - if wifi['is_bridge_member']: - raise ConfigError(( - f'Interface "{wifi["intf"]}" cannot be member of VRF ' - f'"{wifi["vrf"]}" and bridge {wifi["is_bridge_member"]} ' - f'at the same time!')) + if wifi['type'] == 'access-point': + if 'country_code' not in wifi: + raise ConfigError('Wireless regulatory domain is mandatory,\n' \ + 'use "set system wifi-regulatory-domain" for configuration.') + + if 'channel' not in wifi: + raise ConfigError('Wireless channel must be configured!') + + if 'security' in wifi: + if {'wep', 'wpa'} <= set(wifi.get('security', {})): + raise ConfigError('Must either use WEP or WPA security!') + + if 'wep' in wifi['security']: + if 'key' in wifi['security']['wep'] and len(wifi['security']['wep']) > 4: + raise ConfigError('No more then 4 WEP keys configurable') + elif 'key' not in wifi['security']['wep']: + raise ConfigError('Security WEP configured - missing WEP keys!') + + elif 'wpa' in wifi['security']: + wpa = wifi['security']['wpa'] + if not any(i in ['passphrase', 'radius'] for i in wpa): + raise ConfigError('Misssing WPA key or RADIUS server') + + if 'radius' in wpa: + if 'server' in wpa['radius']: + for server in wpa['radius']['server']: + if 'key' not in wpa['radius']['server'][server]: + raise ConfigError(f'Misssing RADIUS shared secret key for server: {server}') + + if 'capabilities' in wifi: + capabilities = wifi['capabilities'] + if 'vht' in capabilities: + if 'ht' not in capabilities: + raise ConfigError('Specify HT flags if you want to use VHT!') + + if {'beamform', 'antenna_count'} <= set(capabilities.get('vht', {})): + if capabilities['vht']['antenna_count'] == '1': + raise ConfigError('Cannot use beam forming with just one antenna!') + + if capabilities['vht']['beamform'] == 'single-user-beamformer': + if int(capabilities['vht']['antenna_count']) < 3: + # Nasty Gotcha: see https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf lines 692-705 + raise ConfigError('Single-user beam former requires at least 3 antennas!') + + if 'station_interfaces' in wifi and wifi['type'] == 'station': + phy = wifi['physical_device'] + if phy in wifi['station_interfaces']: + if len(wifi['station_interfaces'][phy]) > 0: + raise ConfigError('Only one station per wireless physical interface possible!') + + verify_address(wifi) + verify_vrf(wifi) # use common function to verify VLAN configuration verify_vlan_config(wifi) - conf = Config() - # Only one wireless interface per phy can be in station mode - base = ['interfaces', 'wireless'] - for phy in os.listdir('/sys/class/ieee80211'): - stations = [] - for wlan in conf.list_nodes(base): - # the following node is mandatory - if conf.exists(base + [wlan, 'physical-device', phy]): - tmp = conf.return_value(base + [wlan, 'type']) - if tmp == 'station': - stations.append(wlan) - - if len(stations) > 1: - raise ConfigError('Only one station per wireless physical interface possible!') - return None def generate(wifi): - interface = wifi['intf'] + interface = wifi['ifname'] # always stop hostapd service first before reconfiguring it call(f'systemctl stop hostapd@{interface}.service') @@ -513,7 +185,7 @@ def generate(wifi): call(f'systemctl stop wpa_supplicant@{interface}.service') # Delete config files if interface is removed - if wifi['deleted']: + if 'deleted' in wifi: if os.path.isfile(hostapd_conf.format(**wifi)): os.unlink(hostapd_conf.format(**wifi)) @@ -522,10 +194,10 @@ def generate(wifi): return None - if not wifi['mac']: + if 'mac' not in wifi: # http://wiki.stocksy.co.uk/wiki/Multiple_SSIDs_with_hostapd # generate locally administered MAC address from used phy interface - with open('/sys/class/ieee80211/{}/addresses'.format(wifi['phy']), 'r') as f: + with open('/sys/class/ieee80211/{physical_device}/addresses'.format(**wifi), 'r') as f: # some PHYs tend to have multiple interfaces and thus supply multiple MAC # addresses - we only need the first one for our calculation tmp = f.readline().rstrip() @@ -545,20 +217,18 @@ def generate(wifi): wifi['mac'] = str(mac) # render appropriate new config files depending on access-point or station mode - if wifi['op_mode'] == 'ap': - render(hostapd_conf.format(**wifi), 'wifi/hostapd.conf.tmpl', wifi) + if wifi['type'] == 'access-point': + render(hostapd_conf.format(**wifi), 'wifi/hostapd.conf.tmpl', wifi, trim_blocks=True) - elif wifi['op_mode'] == 'station': - render(wpa_suppl_conf.format(**wifi), 'wifi/wpa_supplicant.conf.tmpl', wifi) + elif wifi['type'] == 'station': + render(wpa_suppl_conf.format(**wifi), 'wifi/wpa_supplicant.conf.tmpl', wifi, trim_blocks=True) return None def apply(wifi): - interface = wifi['intf'] - if wifi['deleted']: - w = WiFiIf(interface) - # delete interface - w.remove() + interface = wifi['ifname'] + if 'deleted' in wifi: + WiFiIf(interface).remove() else: # WiFi interface needs to be created on-block (e.g. mode or physical # interface) instead of passing a ton of arguments, I just use a dict @@ -566,97 +236,21 @@ def apply(wifi): conf = deepcopy(WiFiIf.get_config()) # Assign WiFi instance configuration parameters to config dict - conf['phy'] = wifi['phy'] + conf['phy'] = wifi['physical_device'] # Finally create the new interface w = WiFiIf(interface, **conf) - - # assign/remove VRF (ONLY when not a member of a bridge, - # otherwise 'nomaster' removes it from it) - if not wifi['is_bridge_member']: - w.set_vrf(wifi['vrf']) - - # update interface description used e.g. within SNMP - w.set_alias(wifi['description']) - - if wifi['dhcp_client_id']: - w.dhcp.v4.options['client_id'] = wifi['dhcp_client_id'] - - if wifi['dhcp_hostname']: - w.dhcp.v4.options['hostname'] = wifi['dhcp_hostname'] - - if wifi['dhcp_vendor_class_id']: - w.dhcp.v4.options['vendor_class_id'] = wifi['dhcp_vendor_class_id'] - - if wifi['dhcpv6_prm_only']: - w.dhcp.v6.options['dhcpv6_prm_only'] = True - - if wifi['dhcpv6_temporary']: - w.dhcp.v6.options['dhcpv6_temporary'] = True - - if wifi['dhcpv6_pd_length']: - w.dhcp.v6.options['dhcpv6_pd_length'] = wifi['dhcpv6_pd_length'] - - if wifi['dhcpv6_pd_interfaces']: - w.dhcp.v6.options['dhcpv6_pd_interfaces'] = wifi['dhcpv6_pd_interfaces'] - - # ignore link state changes - w.set_link_detect(wifi['disable_link_detect']) - - # Delete old IPv6 EUI64 addresses before changing MAC - for addr in wifi['ipv6_eui64_prefix_remove']: - w.del_ipv6_eui64_address(addr) - - # Change interface MAC address - re-set to real hardware address (hw-id) - # if custom mac is removed - if wifi['mac']: - w.set_mac(wifi['mac']) - elif wifi['hw_id']: - w.set_mac(wifi['hw_id']) - - # Add IPv6 EUI-based addresses - for addr in wifi['ipv6_eui64_prefix']: - w.add_ipv6_eui64_address(addr) - - # configure ARP filter configuration - w.set_arp_filter(wifi['ip_disable_arp_filter']) - # configure ARP accept - w.set_arp_accept(wifi['ip_enable_arp_accept']) - # configure ARP announce - w.set_arp_announce(wifi['ip_enable_arp_announce']) - # configure ARP ignore - w.set_arp_ignore(wifi['ip_enable_arp_ignore']) - # IPv6 accept RA - w.set_ipv6_accept_ra(wifi['ipv6_accept_ra']) - # IPv6 address autoconfiguration - w.set_ipv6_autoconf(wifi['ipv6_autoconf']) - # IPv6 forwarding - w.set_ipv6_forwarding(wifi['ipv6_forwarding']) - # IPv6 Duplicate Address Detection (DAD) tries - w.set_ipv6_dad_messages(wifi['ipv6_dup_addr_detect']) - - # Configure interface address(es) - # - not longer required addresses get removed first - # - newly addresses will be added second - for addr in wifi['address_remove']: - w.del_addr(addr) - for addr in wifi['address']: - w.add_addr(addr) - - # apply all vlans to interface - apply_all_vlans(w, wifi) + w.update(wifi) # Enable/Disable interface - interface is always placed in # administrative down state in WiFiIf class - if not wifi['disable']: - w.set_admin_state('up') - + if 'disable' not in wifi: # Physical interface is now configured. Proceed by starting hostapd or # wpa_supplicant daemon. When type is monitor we can just skip this. - if wifi['op_mode'] == 'ap': + if wifi['type'] == 'access-point': call(f'systemctl start hostapd@{interface}.service') - elif wifi['op_mode'] == 'station': + elif wifi['type'] == 'station': call(f'systemctl start wpa_supplicant@{interface}.service') return None |