summaryrefslogtreecommitdiff
path: root/src/migration-scripts
diff options
context:
space:
mode:
Diffstat (limited to 'src/migration-scripts')
-rwxr-xr-xsrc/migration-scripts/interfaces/18-to-19174
-rwxr-xr-xsrc/migration-scripts/interfaces/19-to-20130
-rwxr-xr-xsrc/migration-scripts/interfaces/20-to-2159
-rwxr-xr-xsrc/migration-scripts/interfaces/21-to-2297
4 files changed, 230 insertions, 230 deletions
diff --git a/src/migration-scripts/interfaces/18-to-19 b/src/migration-scripts/interfaces/18-to-19
index 06e07572f..a12c4a6cd 100755
--- a/src/migration-scripts/interfaces/18-to-19
+++ b/src/migration-scripts/interfaces/18-to-19
@@ -14,65 +14,31 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
+import os
+
from sys import argv
from sys import exit
-from vyos.configtree import ConfigTree
-
-def migrate_ospf(config, path, interface):
- path = path + ['ospf']
- if config.exists(path):
- new_base = ['protocols', 'ospf', 'interface']
- config.set(new_base)
- config.set_tag(new_base)
- config.copy(path, new_base + [interface])
- config.delete(path)
-
- # if "ip ospf" was the only setting, we can clean out the empty
- # ip node afterwards
- if len(config.list_nodes(path[:-1])) == 0:
- config.delete(path[:-1])
-
-def migrate_ospfv3(config, path, interface):
- path = path + ['ospfv3']
- if config.exists(path):
- new_base = ['protocols', 'ospfv3', 'interface']
- config.set(new_base)
- config.set_tag(new_base)
- config.copy(path, new_base + [interface])
- config.delete(path)
- # if "ipv6 ospfv3" was the only setting, we can clean out the empty
- # ip node afterwards
- if len(config.list_nodes(path[:-1])) == 0:
- config.delete(path[:-1])
-
-def migrate_rip(config, path, interface):
- path = path + ['rip']
- if config.exists(path):
- new_base = ['protocols', 'rip', 'interface']
- config.set(new_base)
- config.set_tag(new_base)
- config.copy(path, new_base + [interface])
- config.delete(path)
-
- # if "ip rip" was the only setting, we can clean out the empty
- # ip node afterwards
- if len(config.list_nodes(path[:-1])) == 0:
- config.delete(path[:-1])
+from vyos.configtree import ConfigTree
-def migrate_ripng(config, path, interface):
- path = path + ['ripng']
- if config.exists(path):
- new_base = ['protocols', 'ripng', 'interface']
- config.set(new_base)
- config.set_tag(new_base)
- config.copy(path, new_base + [interface])
- config.delete(path)
+def replace_nat_interfaces(config, old, new):
+ if not config.exists(['nat']):
+ return
+ for direction in ['destination', 'source']:
+ conf_direction = ['nat', direction, 'rule']
+ if not config.exists(conf_direction):
+ return
+ for rule in config.list_nodes(conf_direction):
+ conf_rule = conf_direction + [rule]
+ if config.exists(conf_rule + ['inbound-interface']):
+ tmp = config.return_value(conf_rule + ['inbound-interface'])
+ if tmp == old:
+ config.set(conf_rule + ['inbound-interface'], value=new)
+ if config.exists(conf_rule + ['outbound-interface']):
+ tmp = config.return_value(conf_rule + ['outbound-interface'])
+ if tmp == old:
+ config.set(conf_rule + ['outbound-interface'], value=new)
- # if "ipv6 ripng" was the only setting, we can clean out the empty
- # ip node afterwards
- if len(config.list_nodes(path[:-1])) == 0:
- config.delete(path[:-1])
if __name__ == '__main__':
if (len(argv) < 1):
@@ -80,62 +46,58 @@ if __name__ == '__main__':
exit(1)
file_name = argv[1]
+
with open(file_name, 'r') as f:
config_file = f.read()
config = ConfigTree(config_file)
-
- #
- # Migrate "interface ethernet eth0 ip ospf" to "protocols ospf interface eth0"
- #
- for type in config.list_nodes(['interfaces']):
- for interface in config.list_nodes(['interfaces', type]):
- ip_base = ['interfaces', type, interface, 'ip']
- ipv6_base = ['interfaces', type, interface, 'ipv6']
- migrate_rip(config, ip_base, interface)
- migrate_ripng(config, ipv6_base, interface)
- migrate_ospf(config, ip_base, interface)
- migrate_ospfv3(config, ipv6_base, interface)
-
- vif_path = ['interfaces', type, interface, 'vif']
- if config.exists(vif_path):
- for vif in config.list_nodes(vif_path):
- vif_ip_base = vif_path + [vif, 'ip']
- vif_ipv6_base = vif_path + [vif, 'ipv6']
- ifname = f'{interface}.{vif}'
-
- migrate_rip(config, vif_ip_base, ifname)
- migrate_ripng(config, vif_ipv6_base, ifname)
- migrate_ospf(config, vif_ip_base, ifname)
- migrate_ospfv3(config, vif_ipv6_base, ifname)
-
-
- vif_s_path = ['interfaces', type, interface, 'vif-s']
- if config.exists(vif_s_path):
- for vif_s in config.list_nodes(vif_s_path):
- vif_s_ip_base = vif_s_path + [vif_s, 'ip']
- vif_s_ipv6_base = vif_s_path + [vif_s, 'ipv6']
-
- # vif-c interfaces MUST be migrated before their parent vif-s
- # interface as the migrate_*() functions delete the path!
- vif_c_path = ['interfaces', type, interface, 'vif-s', vif_s, 'vif-c']
- if config.exists(vif_c_path):
- for vif_c in config.list_nodes(vif_c_path):
- vif_c_ip_base = vif_c_path + [vif_c, 'ip']
- vif_c_ipv6_base = vif_c_path + [vif_c, 'ipv6']
- ifname = f'{interface}.{vif_s}.{vif_c}'
-
- migrate_rip(config, vif_c_ip_base, ifname)
- migrate_ripng(config, vif_c_ipv6_base, ifname)
- migrate_ospf(config, vif_c_ip_base, ifname)
- migrate_ospfv3(config, vif_c_ipv6_base, ifname)
-
-
- ifname = f'{interface}.{vif_s}'
- migrate_rip(config, vif_s_ip_base, ifname)
- migrate_ripng(config, vif_s_ipv6_base, ifname)
- migrate_ospf(config, vif_s_ip_base, ifname)
- migrate_ospfv3(config, vif_s_ipv6_base, ifname)
+ base = ['interfaces', 'wirelessmodem']
+ if not config.exists(base):
+ # Nothing to do
+ exit(0)
+
+ new_base = ['interfaces', 'wwan']
+ config.set(new_base)
+ config.set_tag(new_base)
+ for old_interface in config.list_nodes(base):
+ # convert usb0b1.3p1.2 device identifier and extract 1.3 usb bus id
+ usb = config.return_value(base + [old_interface, 'device'])
+ device = usb.split('b')[-1]
+ busid = device.split('p')[0]
+ for new_interface in os.listdir('/sys/class/net'):
+ # we are only interested in interfaces starting with wwan
+ if not new_interface.startswith('wwan'):
+ continue
+ device = os.readlink(f'/sys/class/net/{new_interface}/device')
+ device = device.split(':')[0]
+ if busid in device:
+ config.copy(base + [old_interface], new_base + [new_interface])
+ replace_nat_interfaces(config, old_interface, new_interface)
+
+ config.delete(base)
+
+ # Now that we have copied the old wirelessmodem interfaces to wwan
+ # we can start to migrate also individual config items.
+ for interface in config.list_nodes(new_base):
+ # we do no longer need the USB device name
+ config.delete(new_base + [interface, 'device'])
+ # set/unset DNS configuration
+ dns = new_base + [interface, 'no-peer-dns']
+ if config.exists(dns):
+ config.delete(dns)
+ else:
+ config.set(['system', 'name-servers-dhcp'], value=interface, replace=False)
+
+ # Backup distance is now handled by DHCP option "default-route-distance"
+ distance = dns = new_base + [interface, 'backup', 'distance']
+ old_default_distance = '10'
+ if config.exists(distance):
+ old_default_distance = config.return_value(distance)
+ config.delete(distance)
+ config.set(new_base + [interface, 'dhcp-options', 'default-route-distance'], value=old_default_distance)
+
+ # the new wwan interface use regular IP addressing
+ config.set(new_base + [interface, 'address'], value='dhcp')
try:
with open(file_name, 'w') as f:
diff --git a/src/migration-scripts/interfaces/19-to-20 b/src/migration-scripts/interfaces/19-to-20
index e96663e54..06e07572f 100755
--- a/src/migration-scripts/interfaces/19-to-20
+++ b/src/migration-scripts/interfaces/19-to-20
@@ -18,6 +18,62 @@ from sys import argv
from sys import exit
from vyos.configtree import ConfigTree
+def migrate_ospf(config, path, interface):
+ path = path + ['ospf']
+ if config.exists(path):
+ new_base = ['protocols', 'ospf', 'interface']
+ config.set(new_base)
+ config.set_tag(new_base)
+ config.copy(path, new_base + [interface])
+ config.delete(path)
+
+ # if "ip ospf" was the only setting, we can clean out the empty
+ # ip node afterwards
+ if len(config.list_nodes(path[:-1])) == 0:
+ config.delete(path[:-1])
+
+def migrate_ospfv3(config, path, interface):
+ path = path + ['ospfv3']
+ if config.exists(path):
+ new_base = ['protocols', 'ospfv3', 'interface']
+ config.set(new_base)
+ config.set_tag(new_base)
+ config.copy(path, new_base + [interface])
+ config.delete(path)
+
+ # if "ipv6 ospfv3" was the only setting, we can clean out the empty
+ # ip node afterwards
+ if len(config.list_nodes(path[:-1])) == 0:
+ config.delete(path[:-1])
+
+def migrate_rip(config, path, interface):
+ path = path + ['rip']
+ if config.exists(path):
+ new_base = ['protocols', 'rip', 'interface']
+ config.set(new_base)
+ config.set_tag(new_base)
+ config.copy(path, new_base + [interface])
+ config.delete(path)
+
+ # if "ip rip" was the only setting, we can clean out the empty
+ # ip node afterwards
+ if len(config.list_nodes(path[:-1])) == 0:
+ config.delete(path[:-1])
+
+def migrate_ripng(config, path, interface):
+ path = path + ['ripng']
+ if config.exists(path):
+ new_base = ['protocols', 'ripng', 'interface']
+ config.set(new_base)
+ config.set_tag(new_base)
+ config.copy(path, new_base + [interface])
+ config.delete(path)
+
+ # if "ipv6 ripng" was the only setting, we can clean out the empty
+ # ip node afterwards
+ if len(config.list_nodes(path[:-1])) == 0:
+ config.delete(path[:-1])
+
if __name__ == '__main__':
if (len(argv) < 1):
print("Must specify file name!")
@@ -29,29 +85,57 @@ if __name__ == '__main__':
config = ConfigTree(config_file)
- for type in ['tunnel', 'l2tpv3']:
- base = ['interfaces', type]
- if not config.exists(base):
- # Nothing to do
- continue
-
- for interface in config.list_nodes(base):
- # Migrate "interface tunnel <tunX> encapsulation gre-bridge" to gretap
- encap_path = base + [interface, 'encapsulation']
- if type == 'tunnel' and config.exists(encap_path):
- tmp = config.return_value(encap_path)
- if tmp == 'gre-bridge':
- config.set(encap_path, value='gretap')
-
- # Migrate "interface tunnel|l2tpv3 <interface> local-ip" to source-address
- # Migrate "interface tunnel|l2tpv3 <interface> remote-ip" to remote
- local_ip_path = base + [interface, 'local-ip']
- if config.exists(local_ip_path):
- config.rename(local_ip_path, 'source-address')
-
- remote_ip_path = base + [interface, 'remote-ip']
- if config.exists(remote_ip_path):
- config.rename(remote_ip_path, 'remote')
+ #
+ # Migrate "interface ethernet eth0 ip ospf" to "protocols ospf interface eth0"
+ #
+ for type in config.list_nodes(['interfaces']):
+ for interface in config.list_nodes(['interfaces', type]):
+ ip_base = ['interfaces', type, interface, 'ip']
+ ipv6_base = ['interfaces', type, interface, 'ipv6']
+ migrate_rip(config, ip_base, interface)
+ migrate_ripng(config, ipv6_base, interface)
+ migrate_ospf(config, ip_base, interface)
+ migrate_ospfv3(config, ipv6_base, interface)
+
+ vif_path = ['interfaces', type, interface, 'vif']
+ if config.exists(vif_path):
+ for vif in config.list_nodes(vif_path):
+ vif_ip_base = vif_path + [vif, 'ip']
+ vif_ipv6_base = vif_path + [vif, 'ipv6']
+ ifname = f'{interface}.{vif}'
+
+ migrate_rip(config, vif_ip_base, ifname)
+ migrate_ripng(config, vif_ipv6_base, ifname)
+ migrate_ospf(config, vif_ip_base, ifname)
+ migrate_ospfv3(config, vif_ipv6_base, ifname)
+
+
+ vif_s_path = ['interfaces', type, interface, 'vif-s']
+ if config.exists(vif_s_path):
+ for vif_s in config.list_nodes(vif_s_path):
+ vif_s_ip_base = vif_s_path + [vif_s, 'ip']
+ vif_s_ipv6_base = vif_s_path + [vif_s, 'ipv6']
+
+ # vif-c interfaces MUST be migrated before their parent vif-s
+ # interface as the migrate_*() functions delete the path!
+ vif_c_path = ['interfaces', type, interface, 'vif-s', vif_s, 'vif-c']
+ if config.exists(vif_c_path):
+ for vif_c in config.list_nodes(vif_c_path):
+ vif_c_ip_base = vif_c_path + [vif_c, 'ip']
+ vif_c_ipv6_base = vif_c_path + [vif_c, 'ipv6']
+ ifname = f'{interface}.{vif_s}.{vif_c}'
+
+ migrate_rip(config, vif_c_ip_base, ifname)
+ migrate_ripng(config, vif_c_ipv6_base, ifname)
+ migrate_ospf(config, vif_c_ip_base, ifname)
+ migrate_ospfv3(config, vif_c_ipv6_base, ifname)
+
+
+ ifname = f'{interface}.{vif_s}'
+ migrate_rip(config, vif_s_ip_base, ifname)
+ migrate_ripng(config, vif_s_ipv6_base, ifname)
+ migrate_ospf(config, vif_s_ip_base, ifname)
+ migrate_ospfv3(config, vif_s_ipv6_base, ifname)
try:
with open(file_name, 'w') as f:
diff --git a/src/migration-scripts/interfaces/20-to-21 b/src/migration-scripts/interfaces/20-to-21
index d1ec2ad3e..e96663e54 100755
--- a/src/migration-scripts/interfaces/20-to-21
+++ b/src/migration-scripts/interfaces/20-to-21
@@ -14,47 +14,48 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# A VTI interface also requires an IPSec configuration - VyOS 1.2 supported
-# having a VTI interface in the CLI but no IPSec configuration - drop VTI
-# configuration if this is the case for VyOS 1.4
-
-import sys
+from sys import argv
+from sys import exit
from vyos.configtree import ConfigTree
if __name__ == '__main__':
- if (len(sys.argv) < 1):
+ if (len(argv) < 1):
print("Must specify file name!")
- sys.exit(1)
-
- file_name = sys.argv[1]
+ exit(1)
+ file_name = argv[1]
with open(file_name, 'r') as f:
config_file = f.read()
config = ConfigTree(config_file)
- base = ['interfaces', 'vti']
- if not config.exists(base):
- # Nothing to do
- sys.exit(0)
-
- ipsec_base = ['vpn', 'ipsec', 'site-to-site', 'peer']
- for interface in config.list_nodes(base):
- found = False
- if config.exists(ipsec_base):
- for peer in config.list_nodes(ipsec_base):
- if config.exists(ipsec_base + [peer, 'vti', 'bind']):
- tmp = config.return_value(ipsec_base + [peer, 'vti', 'bind'])
- if tmp == interface:
- # Interface was found and we no longer need to search
- # for it in our IPSec peers
- found = True
- break
- if not found:
- config.delete(base + [interface])
+
+ for type in ['tunnel', 'l2tpv3']:
+ base = ['interfaces', type]
+ if not config.exists(base):
+ # Nothing to do
+ continue
+
+ for interface in config.list_nodes(base):
+ # Migrate "interface tunnel <tunX> encapsulation gre-bridge" to gretap
+ encap_path = base + [interface, 'encapsulation']
+ if type == 'tunnel' and config.exists(encap_path):
+ tmp = config.return_value(encap_path)
+ if tmp == 'gre-bridge':
+ config.set(encap_path, value='gretap')
+
+ # Migrate "interface tunnel|l2tpv3 <interface> local-ip" to source-address
+ # Migrate "interface tunnel|l2tpv3 <interface> remote-ip" to remote
+ local_ip_path = base + [interface, 'local-ip']
+ if config.exists(local_ip_path):
+ config.rename(local_ip_path, 'source-address')
+
+ remote_ip_path = base + [interface, 'remote-ip']
+ if config.exists(remote_ip_path):
+ config.rename(remote_ip_path, 'remote')
try:
with open(file_name, 'w') as f:
f.write(config.to_string())
except OSError as e:
print("Failed to save the modified config: {}".format(e))
- sys.exit(1)
+ exit(1)
diff --git a/src/migration-scripts/interfaces/21-to-22 b/src/migration-scripts/interfaces/21-to-22
index a12c4a6cd..d1ec2ad3e 100755
--- a/src/migration-scripts/interfaces/21-to-22
+++ b/src/migration-scripts/interfaces/21-to-22
@@ -14,94 +14,47 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-import os
-
-from sys import argv
-from sys import exit
+# A VTI interface also requires an IPSec configuration - VyOS 1.2 supported
+# having a VTI interface in the CLI but no IPSec configuration - drop VTI
+# configuration if this is the case for VyOS 1.4
+import sys
from vyos.configtree import ConfigTree
-def replace_nat_interfaces(config, old, new):
- if not config.exists(['nat']):
- return
- for direction in ['destination', 'source']:
- conf_direction = ['nat', direction, 'rule']
- if not config.exists(conf_direction):
- return
- for rule in config.list_nodes(conf_direction):
- conf_rule = conf_direction + [rule]
- if config.exists(conf_rule + ['inbound-interface']):
- tmp = config.return_value(conf_rule + ['inbound-interface'])
- if tmp == old:
- config.set(conf_rule + ['inbound-interface'], value=new)
- if config.exists(conf_rule + ['outbound-interface']):
- tmp = config.return_value(conf_rule + ['outbound-interface'])
- if tmp == old:
- config.set(conf_rule + ['outbound-interface'], value=new)
-
-
if __name__ == '__main__':
- if (len(argv) < 1):
+ if (len(sys.argv) < 1):
print("Must specify file name!")
- exit(1)
+ sys.exit(1)
- file_name = argv[1]
+ file_name = sys.argv[1]
with open(file_name, 'r') as f:
config_file = f.read()
config = ConfigTree(config_file)
- base = ['interfaces', 'wirelessmodem']
+ base = ['interfaces', 'vti']
if not config.exists(base):
# Nothing to do
- exit(0)
-
- new_base = ['interfaces', 'wwan']
- config.set(new_base)
- config.set_tag(new_base)
- for old_interface in config.list_nodes(base):
- # convert usb0b1.3p1.2 device identifier and extract 1.3 usb bus id
- usb = config.return_value(base + [old_interface, 'device'])
- device = usb.split('b')[-1]
- busid = device.split('p')[0]
- for new_interface in os.listdir('/sys/class/net'):
- # we are only interested in interfaces starting with wwan
- if not new_interface.startswith('wwan'):
- continue
- device = os.readlink(f'/sys/class/net/{new_interface}/device')
- device = device.split(':')[0]
- if busid in device:
- config.copy(base + [old_interface], new_base + [new_interface])
- replace_nat_interfaces(config, old_interface, new_interface)
-
- config.delete(base)
-
- # Now that we have copied the old wirelessmodem interfaces to wwan
- # we can start to migrate also individual config items.
- for interface in config.list_nodes(new_base):
- # we do no longer need the USB device name
- config.delete(new_base + [interface, 'device'])
- # set/unset DNS configuration
- dns = new_base + [interface, 'no-peer-dns']
- if config.exists(dns):
- config.delete(dns)
- else:
- config.set(['system', 'name-servers-dhcp'], value=interface, replace=False)
-
- # Backup distance is now handled by DHCP option "default-route-distance"
- distance = dns = new_base + [interface, 'backup', 'distance']
- old_default_distance = '10'
- if config.exists(distance):
- old_default_distance = config.return_value(distance)
- config.delete(distance)
- config.set(new_base + [interface, 'dhcp-options', 'default-route-distance'], value=old_default_distance)
-
- # the new wwan interface use regular IP addressing
- config.set(new_base + [interface, 'address'], value='dhcp')
+ sys.exit(0)
+
+ ipsec_base = ['vpn', 'ipsec', 'site-to-site', 'peer']
+ for interface in config.list_nodes(base):
+ found = False
+ if config.exists(ipsec_base):
+ for peer in config.list_nodes(ipsec_base):
+ if config.exists(ipsec_base + [peer, 'vti', 'bind']):
+ tmp = config.return_value(ipsec_base + [peer, 'vti', 'bind'])
+ if tmp == interface:
+ # Interface was found and we no longer need to search
+ # for it in our IPSec peers
+ found = True
+ break
+ if not found:
+ config.delete(base + [interface])
try:
with open(file_name, 'w') as f:
f.write(config.to_string())
except OSError as e:
print("Failed to save the modified config: {}".format(e))
- exit(1)
+ sys.exit(1)