diff options
Diffstat (limited to 'src')
| -rwxr-xr-x | src/conf_mode/interfaces-openvpn.py | 230 | ||||
| -rwxr-xr-x | src/validators/ipv6 | 3 |
2 files changed, 193 insertions, 40 deletions
diff --git a/src/conf_mode/interfaces-openvpn.py b/src/conf_mode/interfaces-openvpn.py index 435e8a8f0..836deb64b 100755 --- a/src/conf_mode/interfaces-openvpn.py +++ b/src/conf_mode/interfaces-openvpn.py @@ -19,7 +19,7 @@ import re from copy import deepcopy from sys import exit,stderr -from ipaddress import IPv4Address,IPv4Network,summarize_address_range +from ipaddress import ip_address,ip_network,IPv4Address,IPv4Network,IPv6Address,IPv6Network,summarize_address_range from netifaces import interfaces from time import sleep from shutil import rmtree @@ -53,9 +53,11 @@ default_config_data = { 'ipv6_eui64_prefix': '', 'ipv6_forwarding': 1, 'ipv6_dup_addr_detect': 1, + 'ipv6_local_address': [], + 'ipv6_remote_address': [], 'ping_restart': '60', 'ping_interval': '10', - 'local_address': '', + 'local_address': [], 'local_address_subnet': '', 'local_host': '', 'local_port': '', @@ -65,7 +67,7 @@ default_config_data = { 'persistent_tunnel': False, 'protocol': 'udp', 'redirect_gateway': '', - 'remote_address': '', + 'remote_address': [], 'remote_host': [], 'remote_port': '', 'client': [], @@ -78,8 +80,17 @@ default_config_data = { 'server_pool_netmask': '', 'server_push_route': [], 'server_reject_unconfigured': False, - 'server_subnet': '', + 'server_subnet': [], 'server_topology': '', + 'server_ipv6_dns_nameserver': [], + 'server_ipv6_local': '', + 'server_ipv6_prefixlen': '', + 'server_ipv6_remote': '', + 'server_ipv6_pool': True, + 'server_ipv6_pool_base': '', + 'server_ipv6_pool_prefixlen': '', + 'server_ipv6_push_route': [], + 'server_ipv6_subnet': [], 'shared_secret_file': '', 'tls': False, 'tls_auth': '', @@ -119,8 +130,7 @@ def checkCertHeader(header, filename): def getDefaultServer(network, topology, devtype): """ - Gets the default server parameters for a "server" directive. - Currently only IPv4 routed but may be extended to support bridged and/or IPv6 in the future. + Gets the default server parameters for a IPv4 "server" directive. Logic from openvpn's src/openvpn/helper.c. Returns a dict with addresses or False if the input parameters were incorrect. """ @@ -198,6 +208,7 @@ def get_config(): # bridged server should not have a pool by default (but can be specified manually) if openvpn['bridge_member']: openvpn['server_pool'] = False + openvpn['server_ipv6_pool'] = False # set configuration level conf.set_level('interfaces openvpn ' + openvpn['intf']) @@ -276,9 +287,15 @@ def get_config(): # Local IP address of tunnel - even as it is a tag node - we can only work # on the first address if conf.exists('local-address'): - openvpn['local_address'] = conf.list_nodes('local-address')[0] - if conf.exists('local-address {} subnet-mask'.format(openvpn['local_address'])): - openvpn['local_address_subnet'] = conf.return_value('local-address {} subnet-mask'.format(openvpn['local_address'])) + for tmp in conf.list_nodes('local-address'): + tmp_ip = ip_address(tmp) + if tmp_ip.version == 4: + openvpn['local_address'].append(tmp) + if conf.exists('local-address {} subnet-mask'.format(tmp)): + openvpn['local_address_subnet'] = conf.return_value('local-address {} subnet-mask'.format(tmp)) + elif tmp_ip.version == 6: + # input IPv6 address could be expanded so get the compressed version + openvpn['ipv6_local_address'].append(str(tmp_ip)) # Local IP address to accept connections if conf.exists('local-host'): @@ -322,7 +339,12 @@ def get_config(): # IP address of remote end of tunnel if conf.exists('remote-address'): - openvpn['remote_address'] = conf.return_value('remote-address') + for tmp in conf.return_values('remote-address'): + tmp_ip = ip_address(tmp) + if tmp_ip.version == 4: + openvpn['remote_address'].append(tmp) + elif tmp_ip.version == 6: + openvpn['ipv6_remote_address'].append(str(tmp_ip)) # Remote host to connect to (dynamic if not set) if conf.exists('remote-host'): @@ -346,12 +368,18 @@ def get_config(): openvpn['server_topology'] = conf.return_value('server topology') # Server-mode subnet (from which client IPs are allocated) - server_network = None + server_network_v4 = None + server_network_v6 = None if conf.exists('server subnet'): - # server_network is used later in this function - server_network = IPv4Network(conf.return_value('server subnet')) - # convert the network in format: "192.0.2.0 255.255.255.0" for later use in template - openvpn['server_subnet'] = server_network.with_netmask.replace(r'/', ' ') + for tmp in conf.return_values('server subnet'): + tmp_ip = ip_network(tmp) + if tmp_ip.version == 4: + server_network_v4 = tmp_ip + # convert the network to format: "192.0.2.0 255.255.255.0" for later use in template + openvpn['server_subnet'].append(tmp_ip.with_netmask.replace(r'/', ' ')) + elif tmp_ip.version == 6: + server_network_v6 = tmp_ip + openvpn['server_ipv6_subnet'].append(str(tmp_ip)) # Client-specific settings for client in conf.list_nodes('server client'): @@ -360,7 +388,11 @@ def get_config(): data = { 'name': client, 'disable': False, - 'ip': '', + 'ip': [], + 'ipv6_ip': [], + 'ipv6_remote': '', + 'ipv6_push_route': [], + 'ipv6_subnet': [], 'push_route': [], 'subnet': [], 'remote_netmask': '' @@ -371,16 +403,28 @@ def get_config(): data['disable'] = True # IP address of the client - if conf.exists('ip'): - data['ip'] = conf.return_value('ip') + for tmp in conf.return_values('ip'): + tmp_ip = ip_address(tmp) + if tmp_ip.version == 4: + data['ip'].append(tmp) + elif tmp_ip.version == 6: + data['ipv6_ip'].append(str(tmp_ip)) # Route to be pushed to the client - for network in conf.return_values('push-route'): - data['push_route'].append(IPv4Network(network).with_netmask.replace(r'/', ' ')) + for tmp in conf.return_values('push-route'): + tmp_ip = ip_network(tmp) + if tmp_ip.version == 4: + data['push_route'].append(tmp_ip.with_netmask.replace(r'/', ' ')) + elif tmp_ip.version == 6: + data['ipv6_push_route'].append(str(tmp_ip)) # Subnet belonging to the client - for network in conf.return_values('subnet'): - data['subnet'].append(IPv4Network(network).with_netmask.replace(r'/', ' ')) + for tmp in conf.return_values('subnet'): + tmp_ip = ip_network(tmp) + if tmp_ip.version == 4: + data['subnet'].append(tmp_ip.with_netmask.replace(r'/', ' ')) + elif tmp_ip.version == 6: + data['ipv6_subnet'].append(str(tmp_ip)) # Append to global client list openvpn['client'].append(data) @@ -407,6 +451,18 @@ def get_config(): conf.set_level('interfaces openvpn ' + openvpn['intf']) + # Server client IPv6 pool + if conf.exists('server client-ipv6-pool'): + conf.set_level('interfaces openvpn ' + openvpn['intf'] + ' server client-ipv6-pool') + openvpn['server_ipv6_pool'] = not conf.exists('disable') + if conf.exists('base'): + tmp = conf.return_value('base').split('/') + openvpn['server_ipv6_pool_base'] = str(IPv6Address(tmp[0])) + if 1 < len(tmp): + openvpn['server_ipv6_pool_prefixlen'] = tmp[1] + + conf.set_level('interfaces openvpn ' + openvpn['intf']) + # DNS suffix to be pushed to all clients if conf.exists('server domain-name'): openvpn['server_domain'] = conf.return_value('server domain-name') @@ -417,12 +473,21 @@ def get_config(): # Domain Name Server (DNS) if conf.exists('server name-server'): - openvpn['server_dns_nameserver'] = conf.return_values('server name-server') + for tmp in conf.return_values('server name-server'): + tmp_ip = ip_address(tmp) + if tmp_ip.version == 4: + openvpn['server_dns_nameserver'].append(tmp) + elif tmp_ip.version == 6: + openvpn['server_ipv6_dns_nameserver'].append(str(tmp_ip)) # Route to be pushed to all clients if conf.exists('server push-route'): - for network in conf.return_values('server push-route'): - openvpn['server_push_route'].append(IPv4Network(network).with_netmask.replace(r'/', ' ')) + for tmp in conf.return_values('server push-route'): + tmp_ip = ip_network(tmp) + if tmp_ip.version == 4: + openvpn['server_push_route'].append(tmp_ip.with_netmask.replace(r'/', ' ')) + elif tmp_ip.version == 6: + openvpn['server_ipv6_push_route'].append(str(tmp_ip)) # Reject connections from clients that are not explicitly configured if conf.exists('server reject-unconfigured-clients'): @@ -491,9 +556,9 @@ def get_config(): # Set defaults where necessary. # If any of the input parameters are wrong, # this will return False and no defaults will be set. - if server_network and openvpn['server_topology'] and openvpn['type']: + if server_network_v4 and openvpn['server_topology'] and openvpn['type']: default_server = None - default_server = getDefaultServer(server_network, openvpn['server_topology'], openvpn['type']) + default_server = getDefaultServer(server_network_v4, openvpn['server_topology'], openvpn['type']) if default_server: # server-bridge doesn't require a pool so don't set defaults for it if openvpn['server_pool'] and not openvpn['bridge_member']: @@ -509,6 +574,26 @@ def get_config(): for client in openvpn['client']: client['remote_netmask'] = default_server['client_remote_netmask'] + if server_network_v6: + if not openvpn['server_ipv6_local']: + openvpn['server_ipv6_local'] = server_network_v6[1] + if not openvpn['server_ipv6_prefixlen']: + openvpn['server_ipv6_prefixlen'] = server_network_v6.prefixlen + if not openvpn['server_ipv6_remote']: + openvpn['server_ipv6_remote'] = server_network_v6[2] + + if openvpn['server_ipv6_pool'] and server_network_v6.prefixlen < 112: + if not openvpn['server_ipv6_pool_base']: + openvpn['server_ipv6_pool_base'] = server_network_v6[0x1000] + if not openvpn['server_ipv6_pool_prefixlen']: + openvpn['server_ipv6_pool_prefixlen'] = openvpn['server_ipv6_prefixlen'] + + for client in openvpn['client']: + client['ipv6_remote'] = openvpn['server_ipv6_local'] + + if openvpn['redirect_gateway']: + openvpn['redirect_gateway'] += ' ipv6' + return openvpn def verify(openvpn): @@ -562,26 +647,45 @@ def verify(openvpn): raise ConfigError('encryption ncp-ciphers cannot be specified in site-to-site mode, only server or client') if openvpn['mode'] == 'site-to-site' and not openvpn['bridge_member']: - if not openvpn['local_address']: + if not (openvpn['local_address'] or openvpn['ipv6_local_address']): raise ConfigError('Must specify "local-address" or "bridge member interface"') + if len(openvpn['local_address']) > 1 or len(openvpn['ipv6_local_address']) > 1: + raise ConfigError('Cannot specify more than 1 IPv4 and 1 IPv6 "local-address"') + + if len(openvpn['remote_address']) > 1 or len(openvpn['ipv6_remote_address']) > 1: + raise ConfigError('Cannot specify more than 1 IPv4 and 1 IPv6 "remote-address"') + for host in openvpn['remote_host']: - if host == openvpn['remote_address']: + if host in openvpn['remote_address'] or host in openvpn['ipv6_remote_address']: raise ConfigError('"remote-address" cannot be the same as "remote-host"') + if openvpn['local_address'] and not (openvpn['remote_address'] or openvpn['local_address_subnet']): + raise ConfigError('IPv4 "local-address" requires IPv4 "remote-address" or IPv4 "local-address subnet"') + + if openvpn['remote_address'] and not openvpn['local_address']: + raise ConfigError('IPv4 "remote-address" requires IPv4 "local-address"') + + if openvpn['ipv6_local_address'] and not openvpn['ipv6_remote_address']: + raise ConfigError('IPv6 "local-address" requires IPv6 "remote-address"') + + if openvpn['ipv6_remote_address'] and not openvpn['ipv6_local_address']: + raise ConfigError('IPv6 "remote-address" requires IPv6 "local-address"') + if openvpn['type'] == 'tun': - if not openvpn['remote_address']: + if not (openvpn['remote_address'] or openvpn['ipv6_remote_address']): raise ConfigError('Must specify "remote-address"') - if openvpn['local_address'] == openvpn['remote_address']: + if ( (openvpn['local_address'] and openvpn['local_address'] == openvpn['remote_address']) or + (openvpn['ipv6_local_address'] and openvpn['ipv6_local_address'] == openvpn['ipv6_remote_address']) ): raise ConfigError('"local-address" and "remote-address" cannot be the same') - if openvpn['local_address'] == openvpn['local_host']: + if openvpn['local_host'] in openvpn['local_address'] or openvpn['local_host'] in openvpn['ipv6_local_address']: raise ConfigError('"local-address" cannot be the same as "local-host"') else: # checks for client-server or site-to-site bridged - if openvpn['local_address'] or openvpn['remote_address']: + if openvpn['local_address'] or openvpn['ipv6_local_address'] or openvpn['remote_address'] or openvpn['ipv6_remote_address']: raise ConfigError('Cannot specify "local-address" or "remote-address" in client-server or bridge mode') # @@ -603,8 +707,15 @@ def verify(openvpn): if not openvpn['tls_dh'] and not checkCertHeader('-----BEGIN EC PRIVATE KEY-----', openvpn['tls_key']): raise ConfigError('Must specify "tls dh-file" when not using EC keys in server mode') + if len(openvpn['server_subnet']) > 1 or len(openvpn['server_ipv6_subnet']) > 1: + raise ConfigError('Cannot specify more than 1 IPv4 and 1 IPv6 server subnet') + + for client in openvpn['client']: + if len(client['ip']) > 1 or len(client['ipv6_ip']) > 1: + raise ConfigError(f'Server client "{client["name"]}": cannot specify more than 1 IPv4 and 1 IPv6 IP') + if openvpn['server_subnet']: - subnet = IPv4Network(openvpn['server_subnet'].replace(' ', '/')) + subnet = IPv4Network(openvpn['server_subnet'][0].replace(' ', '/')) if openvpn['type'] == 'tun' and subnet.prefixlen > 29: raise ConfigError('Server subnets smaller than /29 with device type "tun" are not supported') @@ -612,8 +723,8 @@ def verify(openvpn): raise ConfigError('Server subnets smaller than /30 with device type "tap" are not supported') for client in openvpn['client']: - if client['ip'] and not IPv4Address(client['ip']) in subnet: - raise ConfigError(f'Client IP "{client["ip"]}" not in server subnet "{subnet}"') + if client['ip'] and not IPv4Address(client['ip'][0]) in subnet: + raise ConfigError(f'Client "{client["name"]}" IP {client["ip"][0]} not in server subnet {subnet}') else: if not openvpn['bridge_member']: @@ -627,17 +738,56 @@ def verify(openvpn): v4PoolStop = IPv4Address(openvpn['server_pool_stop']) if v4PoolStart > v4PoolStop: raise ConfigError(f'Server client-ip-pool start address {v4PoolStart} is larger than stop address {v4PoolStop}') - if (int(v4PoolStop) - int(v4PoolStart) >= 65536): - raise ConfigError(f'Server client-ip-pool is too large [{v4PoolStart} -> {v4PoolStop}], maximum is 65536 addresses.') + + v4PoolSize = int(v4PoolStop) - int(v4PoolStart) + if v4PoolSize >= 65536: + raise ConfigError(f'Server client-ip-pool is too large [{v4PoolStart} -> {v4PoolStop} = {v4PoolSize}], maximum is 65536 addresses.') v4PoolNets = list(summarize_address_range(v4PoolStart, v4PoolStop)) for client in openvpn['client']: if client['ip']: for v4PoolNet in v4PoolNets: - if IPv4Address(client['ip']) in v4PoolNet: - print(f'Warning: Client "{client["name"]}" IP {client["ip"]} is in server IP pool, it is not reserved for this client.', + if IPv4Address(client['ip'][0]) in v4PoolNet: + print(f'Warning: Client "{client["name"]}" IP {client["ip"][0]} is in server IP pool, it is not reserved for this client.', + file=stderr) + + if openvpn['server_ipv6_subnet']: + if not openvpn['server_subnet']: + raise ConfigError('IPv6 server requires an IPv4 server subnet') + + if openvpn['server_ipv6_pool']: + if not openvpn['server_pool']: + raise ConfigError('IPv6 server pool requires an IPv4 server pool') + + if int(openvpn['server_ipv6_pool_prefixlen']) >= 112: + raise ConfigError('IPv6 server pool must be larger than /112') + + v6PoolStart = IPv6Address(openvpn['server_ipv6_pool_base']) + v6PoolStop = IPv6Network((v6PoolStart, openvpn['server_ipv6_pool_prefixlen']), strict=False)[-1] # don't remove the parentheses, it's a 2-tuple + v6PoolSize = int(v6PoolStop) - int(v6PoolStart) if int(openvpn['server_ipv6_pool_prefixlen']) > 96 else 65536 + if v6PoolSize < v4PoolSize: + raise ConfigError(f'IPv6 server pool must be at least as large as the IPv4 pool (current sizes: IPv6={v6PoolSize} IPv4={v4PoolSize})') + + v6PoolNets = list(summarize_address_range(v6PoolStart, v6PoolStop)) + for client in openvpn['client']: + if client['ipv6_ip']: + for v6PoolNet in v6PoolNets: + if IPv6Address(client['ipv6_ip'][0]) in v6PoolNet: + print(f'Warning: Client "{client["name"]}" IP {client["ipv6_ip"][0]} is in server IP pool, it is not reserved for this client.', file=stderr) + else: + if openvpn['server_ipv6_push_route']: + raise ConfigError('IPv6 push-route requires an IPv6 server subnet') + + for client in openvpn ['client']: + if client['ipv6_ip']: + raise ConfigError(f'Server client "{client["name"]}" IPv6 IP requires an IPv6 server subnet') + if client['ipv6_push_route']: + raise ConfigError(f'Server client "{client["name"]} IPv6 push-route requires an IPv6 server subnet"') + if client['ipv6_subnet']: + raise ConfigError(f'Server client "{client["name"]} IPv6 subnet requires an IPv6 server subnet"') + else: # checks for both client and site-to-site go here if openvpn['server_reject_unconfigured']: diff --git a/src/validators/ipv6 b/src/validators/ipv6 new file mode 100755 index 000000000..f18d4a63e --- /dev/null +++ b/src/validators/ipv6 @@ -0,0 +1,3 @@ +#!/bin/sh + +ipaddrcheck --is-ipv6 $1 |