diff options
Diffstat (limited to 'src')
| -rwxr-xr-x | src/conf_mode/firewall.py | 22 | ||||
| -rwxr-xr-x | src/conf_mode/nat.py | 73 | ||||
| -rwxr-xr-x | src/helpers/vyos-domain-resolver.py | 1 |
3 files changed, 78 insertions, 18 deletions
diff --git a/src/conf_mode/firewall.py b/src/conf_mode/firewall.py index 2bb765e65..783adec46 100755 --- a/src/conf_mode/firewall.py +++ b/src/conf_mode/firewall.py @@ -41,6 +41,7 @@ from vyos import ConfigError from vyos import airbag airbag.enable() +nat_conf_script = '/usr/libexec/vyos/conf_mode/nat.py' policy_route_conf_script = '/usr/libexec/vyos/conf_mode/policy-route.py' nftables_conf = '/run/nftables.conf' @@ -158,7 +159,7 @@ def get_config(config=None): for zone in firewall['zone']: firewall['zone'][zone] = dict_merge(default_values, firewall['zone'][zone]) - firewall['policy_resync'] = bool('group' in firewall or node_changed(conf, base + ['group'])) + firewall['group_resync'] = bool('group' in firewall or node_changed(conf, base + ['group'])) if 'config_trap' in firewall and firewall['config_trap'] == 'enable': diff = get_config_diff(conf) @@ -463,6 +464,12 @@ def post_apply_trap(firewall): cmd(base_cmd + ' '.join(objects)) +def resync_nat(): + # Update nat as firewall groups were updated + tmp, out = rc_cmd(nat_conf_script) + if tmp > 0: + Warning(f'Failed to re-apply nat configuration! {out}') + def resync_policy_route(): # Update policy route as firewall groups were updated tmp, out = rc_cmd(policy_route_conf_script) @@ -474,19 +481,20 @@ def apply(firewall): if install_result == 1: raise ConfigError(f'Failed to apply firewall: {output}') + apply_sysfs(firewall) + + if firewall['group_resync']: + resync_nat() + resync_policy_route() + # T970 Enable a resolver (systemd daemon) that checks - # domain-group addresses and update entries for domains by timeout + # domain-group/fqdn addresses and update entries for domains by timeout # If router loaded without internet connection or for synchronization domain_action = 'stop' if dict_search_args(firewall, 'group', 'domain_group') or firewall['ip_fqdn'] or firewall['ip6_fqdn']: domain_action = 'restart' call(f'systemctl {domain_action} vyos-domain-resolver.service') - apply_sysfs(firewall) - - if firewall['policy_resync']: - resync_policy_route() - if firewall['geoip_updated']: # Call helper script to Update set contents if 'name' in firewall['geoip_updated'] or 'ipv6_name' in firewall['geoip_updated']: diff --git a/src/conf_mode/nat.py b/src/conf_mode/nat.py index 978c043e9..9f8221514 100755 --- a/src/conf_mode/nat.py +++ b/src/conf_mode/nat.py @@ -32,6 +32,7 @@ from vyos.util import cmd from vyos.util import run from vyos.util import check_kmod from vyos.util import dict_search +from vyos.util import dict_search_args from vyos.validate import is_addr_assigned from vyos.xml import defaults from vyos import ConfigError @@ -47,6 +48,13 @@ else: nftables_nat_config = '/run/nftables_nat.conf' nftables_static_nat_conf = '/run/nftables_static-nat-rules.nft' +valid_groups = [ + 'address_group', + 'domain_group', + 'network_group', + 'port_group' +] + def get_handler(json, chain, target): """ Get nftable rule handler number of given chain/target combination. Handler is required when adding NAT/Conntrack helper targets """ @@ -60,7 +68,7 @@ def get_handler(json, chain, target): return None -def verify_rule(config, err_msg): +def verify_rule(config, err_msg, groups_dict): """ Common verify steps used for both source and destination NAT """ if (dict_search('translation.port', config) != None or @@ -78,6 +86,45 @@ def verify_rule(config, err_msg): 'statically maps a whole network of addresses onto another\n' \ 'network of addresses') + for side in ['destination', 'source']: + if side in config: + side_conf = config[side] + + if len({'address', 'fqdn'} & set(side_conf)) > 1: + raise ConfigError('Only one of address, fqdn or geoip can be specified') + + if 'group' in side_conf: + if len({'address_group', 'network_group', 'domain_group'} & set(side_conf['group'])) > 1: + raise ConfigError('Only one address-group, network-group or domain-group can be specified') + + for group in valid_groups: + if group in side_conf['group']: + group_name = side_conf['group'][group] + error_group = group.replace("_", "-") + + if group in ['address_group', 'network_group', 'domain_group']: + types = [t for t in ['address', 'fqdn'] if t in side_conf] + if types: + raise ConfigError(f'{error_group} and {types[0]} cannot both be defined') + + if group_name and group_name[0] == '!': + group_name = group_name[1:] + + group_obj = dict_search_args(groups_dict, group, group_name) + + if group_obj is None: + raise ConfigError(f'Invalid {error_group} "{group_name}" on firewall rule') + + if not group_obj: + Warning(f'{error_group} "{group_name}" has no members!') + + if dict_search_args(side_conf, 'group', 'port_group'): + if 'protocol' not in config: + raise ConfigError('Protocol must be defined if specifying a port-group') + + if config['protocol'] not in ['tcp', 'udp', 'tcp_udp']: + raise ConfigError('Protocol must be tcp, udp, or tcp_udp when specifying a port-group') + def get_config(config=None): if config: conf = config @@ -105,16 +152,20 @@ def get_config(config=None): condensed_json = jmespath.search(pattern, nftable_json) if not conf.exists(base): - nat['helper_functions'] = 'remove' - - # Retrieve current table handler positions - nat['pre_ct_ignore'] = get_handler(condensed_json, 'PREROUTING', 'VYOS_CT_HELPER') - nat['pre_ct_conntrack'] = get_handler(condensed_json, 'PREROUTING', 'NAT_CONNTRACK') - nat['out_ct_ignore'] = get_handler(condensed_json, 'OUTPUT', 'VYOS_CT_HELPER') - nat['out_ct_conntrack'] = get_handler(condensed_json, 'OUTPUT', 'NAT_CONNTRACK') + if get_handler(condensed_json, 'PREROUTING', 'VYOS_CT_HELPER'): + nat['helper_functions'] = 'remove' + + # Retrieve current table handler positions + nat['pre_ct_ignore'] = get_handler(condensed_json, 'PREROUTING', 'VYOS_CT_HELPER') + nat['pre_ct_conntrack'] = get_handler(condensed_json, 'PREROUTING', 'NAT_CONNTRACK') + nat['out_ct_ignore'] = get_handler(condensed_json, 'OUTPUT', 'VYOS_CT_HELPER') + nat['out_ct_conntrack'] = get_handler(condensed_json, 'OUTPUT', 'NAT_CONNTRACK') nat['deleted'] = '' return nat + nat['firewall_group'] = conf.get_config_dict(['firewall', 'group'], key_mangling=('-', '_'), get_first_key=True, + no_tag_node_value_mangle=True) + # check if NAT connection tracking helpers need to be set up - this has to # be done only once if not get_handler(condensed_json, 'PREROUTING', 'NAT_CONNTRACK'): @@ -157,7 +208,7 @@ def verify(nat): Warning(f'IP address {ip} does not exist on the system!') # common rule verification - verify_rule(config, err_msg) + verify_rule(config, err_msg, nat['firewall_group']) if dict_search('destination.rule', nat): @@ -175,7 +226,7 @@ def verify(nat): raise ConfigError(f'{err_msg} translation requires address and/or port') # common rule verification - verify_rule(config, err_msg) + verify_rule(config, err_msg, nat['firewall_group']) if dict_search('static.rule', nat): for rule, config in dict_search('static.rule', nat).items(): @@ -186,7 +237,7 @@ def verify(nat): 'inbound-interface not specified') # common rule verification - verify_rule(config, err_msg) + verify_rule(config, err_msg, nat['firewall_group']) return None diff --git a/src/helpers/vyos-domain-resolver.py b/src/helpers/vyos-domain-resolver.py index 2f71f15db..035c208b2 100755 --- a/src/helpers/vyos-domain-resolver.py +++ b/src/helpers/vyos-domain-resolver.py @@ -37,6 +37,7 @@ domain_state = {} ipv4_tables = { 'ip mangle', 'ip vyos_filter', + 'ip vyos_nat' } ipv6_tables = { |