summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rwxr-xr-xsrc/completion/list_ddclient_protocols.sh2
-rwxr-xr-xsrc/conf_mode/dns_dynamic.py38
-rwxr-xr-xsrc/conf_mode/interfaces-bridge.py18
-rwxr-xr-xsrc/conf_mode/service_pppoe-server.py7
-rw-r--r--src/etc/udev/rules.d/99-vyos-systemd.rules79
-rwxr-xr-xsrc/helpers/strip-private.py4
-rwxr-xr-xsrc/migration-scripts/dns-dynamic/1-to-270
-rwxr-xr-xsrc/validators/ddclient-protocol2
8 files changed, 197 insertions, 23 deletions
diff --git a/src/completion/list_ddclient_protocols.sh b/src/completion/list_ddclient_protocols.sh
index 3b4eff4d6..c8855b5d1 100755
--- a/src/completion/list_ddclient_protocols.sh
+++ b/src/completion/list_ddclient_protocols.sh
@@ -14,4 +14,4 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-echo -n $(ddclient -list-protocols | grep -vE 'nsupdate|cloudns')
+echo -n $(ddclient -list-protocols | grep -vE 'nsupdate|cloudns|porkbun')
diff --git a/src/conf_mode/dns_dynamic.py b/src/conf_mode/dns_dynamic.py
index 874c4b689..d6ef620fe 100755
--- a/src/conf_mode/dns_dynamic.py
+++ b/src/conf_mode/dns_dynamic.py
@@ -30,16 +30,21 @@ config_file = r'/run/ddclient/ddclient.conf'
systemd_override = r'/run/systemd/system/ddclient.service.d/override.conf'
# Protocols that require zone
-zone_necessary = ['cloudflare', 'godaddy', 'hetzner', 'gandi', 'nfsn']
+zone_necessary = ['cloudflare', 'digitalocean', 'godaddy', 'hetzner', 'gandi', 'nfsn']
+zone_supported = zone_necessary + ['dnsexit2', 'zoneedit1']
# Protocols that do not require username
-username_unnecessary = ['1984', 'cloudflare', 'cloudns', 'duckdns', 'freemyip', 'hetzner', 'keysystems', 'njalla']
+username_unnecessary = ['1984', 'cloudflare', 'cloudns', 'digitalocean', 'dnsexit2',
+ 'duckdns', 'freemyip', 'hetzner', 'keysystems', 'njalla',
+ 'regfishde']
# Protocols that support TTL
-ttl_supported = ['cloudflare', 'gandi', 'hetzner', 'dnsexit', 'godaddy', 'nfsn']
+ttl_supported = ['cloudflare', 'dnsexit2', 'gandi', 'hetzner', 'godaddy', 'nfsn']
# Protocols that support both IPv4 and IPv6
-dualstack_supported = ['cloudflare', 'dyndns2', 'freedns', 'njalla']
+dualstack_supported = ['cloudflare', 'digitalocean', 'dnsexit2', 'duckdns',
+ 'dyndns2', 'easydns', 'freedns', 'hetzner', 'infomaniak',
+ 'njalla']
# dyndns2 protocol in ddclient honors dual stack for selective servers
# because of the way it is implemented in ddclient
@@ -82,34 +87,37 @@ def verify(dyndns):
f'based Dynamic DNS service on "{address}"')
# Dynamic DNS service provider - configuration validation
+ if 'web_options' in dyndns['address'][address] and address != 'web':
+ raise ConfigError(f'"web-options" is applicable only when using HTTP(S) web request to obtain the IP address')
+
+ # Dynamic DNS service provider - configuration validation
if 'service' in dyndns['address'][address]:
for service, config in dyndns['address'][address]['service'].items():
- error_msg = f'is required for Dynamic DNS service "{service}" on "{address}"'
+ error_msg_req = f'is required for Dynamic DNS service "{service}" on "{address}" with protocol "{config["protocol"]}"'
+ error_msg_uns = f'is not supported for Dynamic DNS service "{service}" on "{address}" with protocol "{config["protocol"]}"'
for field in ['host_name', 'password', 'protocol']:
if field not in config:
- raise ConfigError(f'"{field.replace("_", "-")}" {error_msg}')
+ raise ConfigError(f'"{field.replace("_", "-")}" {error_msg_req}')
if config['protocol'] in zone_necessary and 'zone' not in config:
- raise ConfigError(f'"zone" {error_msg}')
+ raise ConfigError(f'"zone" {error_msg_req}')
- if config['protocol'] not in zone_necessary and 'zone' in config:
- raise ConfigError(f'"{config["protocol"]}" does not support "zone"')
+ if config['protocol'] not in zone_supported and 'zone' in config:
+ raise ConfigError(f'"zone" {error_msg_uns}')
if config['protocol'] not in username_unnecessary and 'username' not in config:
- raise ConfigError(f'"username" {error_msg}')
+ raise ConfigError(f'"username" {error_msg_req}')
if config['protocol'] not in ttl_supported and 'ttl' in config:
- raise ConfigError(f'"{config["protocol"]}" does not support "ttl"')
+ raise ConfigError(f'"ttl" {error_msg_uns}')
if config['ip_version'] == 'both':
if config['protocol'] not in dualstack_supported:
- raise ConfigError(f'"{config["protocol"]}" does not support '
- f'both IPv4 and IPv6 at the same time')
+ raise ConfigError(f'Both IPv4 and IPv6 at the same time {error_msg_uns}')
# dyndns2 protocol in ddclient honors dual stack only for dyn.com (dyndns.org)
if config['protocol'] == 'dyndns2' and 'server' in config and config['server'] not in dyndns_dualstack_servers:
- raise ConfigError(f'"{config["protocol"]}" does not support '
- f'both IPv4 and IPv6 at the same time for "{config["server"]}"')
+ raise ConfigError(f'Both IPv4 and IPv6 at the same time {error_msg_uns} for "{config["server"]}"')
if {'wait_time', 'expiry_time'} <= config.keys() and int(config['expiry_time']) < int(config['wait_time']):
raise ConfigError(f'"expiry-time" must be greater than "wait-time"')
diff --git a/src/conf_mode/interfaces-bridge.py b/src/conf_mode/interfaces-bridge.py
index c82f01e53..31508a3c5 100755
--- a/src/conf_mode/interfaces-bridge.py
+++ b/src/conf_mode/interfaces-bridge.py
@@ -1,6 +1,6 @@
#!/usr/bin/env python3
#
-# Copyright (C) 2019-2020 VyOS maintainers and contributors
+# Copyright (C) 2019-2023 VyOS maintainers and contributors
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 or later as
@@ -28,7 +28,8 @@ from vyos.configverify import verify_vrf
from vyos.ifconfig import BridgeIf
from vyos.configdict import has_address_configured
from vyos.configdict import has_vrf_configured
-
+from vyos.configdep import set_dependents
+from vyos.configdep import call_dependents
from vyos.utils.dict import dict_search
from vyos import ConfigError
@@ -83,6 +84,12 @@ def get_config(config=None):
if 'enable_vlan' in bridge and tmp:
bridge['member']['interface'][interface].update({'has_vlan' : ''})
+ # When using VXLAN member interfaces that are configured for Single
+ # VXLAN Device (SVD) we need to call the VXLAN conf-mode script to re-create
+ # VLAN to VNI mappings if required
+ if interface.startswith('vxlan'):
+ set_dependents('vxlan', conf, interface)
+
# delete empty dictionary keys - no need to run code paths if nothing is there to do
if 'member' in bridge:
if 'interface' in bridge['member'] and len(bridge['member']['interface']) == 0:
@@ -159,6 +166,13 @@ def apply(bridge):
else:
br.update(bridge)
+ for interface in dict_search('member.interface', bridge) or []:
+ if interface.startswith('vxlan'):
+ try:
+ call_dependents()
+ except ConfigError:
+ raise ConfigError('Error in updating VXLAN interface after changing bridge!')
+
return None
if __name__ == '__main__':
diff --git a/src/conf_mode/service_pppoe-server.py b/src/conf_mode/service_pppoe-server.py
index aace267a7..87660c127 100755
--- a/src/conf_mode/service_pppoe-server.py
+++ b/src/conf_mode/service_pppoe-server.py
@@ -48,9 +48,12 @@ def get_config(config=None):
# reload-or-restart does not implemented in accel-ppp
# use this workaround until it will be implemented
# https://phabricator.accel-ppp.org/T3
- if is_node_changed(conf, base + ['client-ip-pool']) or is_node_changed(
- conf, base + ['client-ipv6-pool']):
+ conditions = [is_node_changed(conf, base + ['client-ip-pool']),
+ is_node_changed(conf, base + ['client-ipv6-pool']),
+ is_node_changed(conf, base + ['interface'])]
+ if any(conditions):
pppoe.update({'restart_required': {}})
+
return pppoe
def verify(pppoe):
diff --git a/src/etc/udev/rules.d/99-vyos-systemd.rules b/src/etc/udev/rules.d/99-vyos-systemd.rules
new file mode 100644
index 000000000..54aea668c
--- /dev/null
+++ b/src/etc/udev/rules.d/99-vyos-systemd.rules
@@ -0,0 +1,79 @@
+# The main reason that we store this file is systemd-udevd interfaces excludes
+# /lib/systemd/systemd-sysctl for dynamic interfaces (ppp|ipoe|l2tp etc)
+
+ACTION=="remove", GOTO="systemd_end"
+
+SUBSYSTEM=="tty", KERNEL=="tty[a-zA-Z]*|hvc*|xvc*|hvsi*|ttysclp*|sclp_line*|3270/tty[0-9]*", TAG+="systemd"
+KERNEL=="vport*", TAG+="systemd"
+
+SUBSYSTEM=="ptp", TAG+="systemd"
+
+SUBSYSTEM=="ubi", TAG+="systemd"
+
+SUBSYSTEM=="block", TAG+="systemd"
+
+# We can't make any conclusions about suspended DM devices so let's just import previous SYSTEMD_READY state and skip other rules
+SUBSYSTEM=="block", ENV{DM_SUSPENDED}=="1", IMPORT{db}="SYSTEMD_READY", GOTO="systemd_end"
+SUBSYSTEM=="block", ACTION=="add", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", ENV{SYSTEMD_READY}="0"
+
+# Ignore encrypted devices with no identified superblock on it, since
+# we are probably still calling mke2fs or mkswap on it.
+SUBSYSTEM=="block", ENV{DM_UUID}=="CRYPT-*", ENV{ID_PART_TABLE_TYPE}=="", ENV{ID_FS_USAGE}=="", ENV{SYSTEMD_READY}="0"
+
+# Explicitly set SYSTEMD_READY=1 for DM devices that don't have it set yet, so that we always have something to import above
+SUBSYSTEM=="block", ENV{DM_UUID}=="?*", ENV{SYSTEMD_READY}=="", ENV{SYSTEMD_READY}="1"
+
+# add symlink to GPT root disk
+SUBSYSTEM=="block", ENV{ID_PART_GPT_AUTO_ROOT}=="1", ENV{ID_FS_TYPE}!="crypto_LUKS", SYMLINK+="gpt-auto-root"
+SUBSYSTEM=="block", ENV{ID_PART_GPT_AUTO_ROOT}=="1", ENV{ID_FS_TYPE}=="crypto_LUKS", SYMLINK+="gpt-auto-root-luks"
+SUBSYSTEM=="block", ENV{DM_UUID}=="CRYPT-*", ENV{DM_NAME}=="root", SYMLINK+="gpt-auto-root"
+
+# Ignore raid devices that are not yet assembled and started
+SUBSYSTEM=="block", ENV{DEVTYPE}=="disk", KERNEL=="md*", TEST!="md/array_state", ENV{SYSTEMD_READY}="0"
+SUBSYSTEM=="block", ENV{DEVTYPE}=="disk", KERNEL=="md*", ATTR{md/array_state}=="|clear|inactive", ENV{SYSTEMD_READY}="0"
+
+# Ignore loop devices that don't have any file attached
+SUBSYSTEM=="block", KERNEL=="loop[0-9]*", ENV{DEVTYPE}=="disk", TEST!="loop/backing_file", ENV{SYSTEMD_READY}="0"
+
+# Ignore nbd devices until the PID file exists (which signals a connected device)
+SUBSYSTEM=="block", KERNEL=="nbd*", ENV{DEVTYPE}=="disk", TEST!="pid", ENV{SYSTEMD_READY}="0"
+
+# We need a hardware independent way to identify network devices. We
+# use the /sys/subsystem/ path for this. Kernel "bus" and "class" names
+# should be treated as one namespace, like udev handles it. This is mostly
+# just an identification string for systemd, so whether the path actually is
+# accessible or not does not matter as long as it is unique and in the
+# filesystem namespace.
+
+SUBSYSTEM=="net", KERNEL!="lo", TAG+="systemd", ENV{SYSTEMD_ALIAS}+="/sys/subsystem/net/devices/$name"
+SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_ALIAS}+="/sys/subsystem/bluetooth/devices/%k", \
+ ENV{SYSTEMD_WANTS}+="bluetooth.target", ENV{SYSTEMD_USER_WANTS}+="bluetooth.target"
+
+ENV{ID_SMARTCARD_READER}=="?*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="smartcard.target", ENV{SYSTEMD_USER_WANTS}+="smartcard.target"
+SUBSYSTEM=="sound", KERNEL=="controlC*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sound.target", ENV{SYSTEMD_USER_WANTS}+="sound.target"
+
+SUBSYSTEM=="printer", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target", ENV{SYSTEMD_USER_WANTS}+="printer.target"
+SUBSYSTEM=="usb", KERNEL=="lp*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target", ENV{SYSTEMD_USER_WANTS}+="printer.target"
+SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target", ENV{SYSTEMD_USER_WANTS}+="printer.target"
+
+SUBSYSTEM=="udc", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}+="usb-gadget.target"
+
+# Apply sysctl variables to network devices (and only to those) as they appear.
+# T5706. Exclude: lo, dummy*, ppp*, ipoe*, l2tp*, pptp*, sslvpn* and sstp*.
+ACTION=="add", SUBSYSTEM=="net", KERNEL!="lo|dummy*|ppp*|ipoe*|l2tp*|pptp*|sslvpn*|sstp*", RUN+="/lib/systemd/systemd-sysctl --prefix=/net/ipv4/conf/$name --prefix=/net/ipv4/neigh/$name --prefix=/net/ipv6/conf/$name --prefix=/net/ipv6/neigh/$name"
+
+# Pull in backlight save/restore for all backlight devices and
+# keyboard backlights
+SUBSYSTEM=="backlight", TAG+="systemd", IMPORT{builtin}="path_id", ENV{SYSTEMD_WANTS}+="systemd-backlight@backlight:$name.service"
+SUBSYSTEM=="leds", KERNEL=="*kbd_backlight", TAG+="systemd", IMPORT{builtin}="path_id", ENV{SYSTEMD_WANTS}+="systemd-backlight@leds:$name.service"
+
+# Pull in rfkill save/restore for all rfkill devices
+SUBSYSTEM=="rfkill", ENV{SYSTEMD_RFKILL}="1"
+SUBSYSTEM=="rfkill", IMPORT{builtin}="path_id"
+SUBSYSTEM=="misc", KERNEL=="rfkill", TAG+="systemd", ENV{SYSTEMD_WANTS}+="systemd-rfkill.socket"
+
+# Asynchronously mount file systems implemented by these modules as soon as they are loaded.
+SUBSYSTEM=="module", KERNEL=="fuse", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sys-fs-fuse-connections.mount"
+SUBSYSTEM=="module", KERNEL=="configfs", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sys-kernel-config.mount"
+
+LABEL="systemd_end"
diff --git a/src/helpers/strip-private.py b/src/helpers/strip-private.py
index eb584edaf..cb29069cf 100755
--- a/src/helpers/strip-private.py
+++ b/src/helpers/strip-private.py
@@ -1,6 +1,6 @@
#!/usr/bin/python3
-# Copyright 2021-2022 VyOS maintainers and contributors <maintainers@vyos.io>
+# Copyright 2021-2023 VyOS maintainers and contributors <maintainers@vyos.io>
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
@@ -21,7 +21,6 @@ import sys
from netaddr import IPNetwork, AddrFormatError
-
parser = argparse.ArgumentParser(description='strip off private information from VyOS config')
strictness = parser.add_mutually_exclusive_group()
@@ -119,6 +118,7 @@ if __name__ == "__main__":
(True, re.compile(r'(shared-secret-key-file|ca-cert-file|cert-file|dh-file|key-file|client) (\S+)'), r'\1 xxxxxx'),
# Strip IPSEC secrets
(True, re.compile(r'pre-shared-secret \S+'), 'pre-shared-secret xxxxxx'),
+ (True, re.compile(r'secret \S+'), 'secret xxxxxx'),
# Strip OSPF md5-key
(True, re.compile(r'md5-key \S+'), 'md5-key xxxxxx'),
# Strip WireGuard private-key
diff --git a/src/migration-scripts/dns-dynamic/1-to-2 b/src/migration-scripts/dns-dynamic/1-to-2
new file mode 100755
index 000000000..8b599b57a
--- /dev/null
+++ b/src/migration-scripts/dns-dynamic/1-to-2
@@ -0,0 +1,70 @@
+#!/usr/bin/env python3
+
+# Copyright (C) 2023 VyOS maintainers and contributors
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 or later as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# T5708:
+# - migrate "service dns dynamic timeout ..."
+# to "service dns dynamic interval ..."
+# - remove "service dns dynamic address <interface> web-options ..." when <interface> != "web"
+# - migrate "service dns dynamic address <interface> service <service> protocol dnsexit"
+# to "service dns dynamic address <interface> service <service> protocol dnsexit2"
+
+import sys
+from vyos.configtree import ConfigTree
+
+if len(sys.argv) < 2:
+ print("Must specify file name!")
+ sys.exit(1)
+
+file_name = sys.argv[1]
+
+with open(file_name, 'r') as f:
+ config_file = f.read()
+
+config = ConfigTree(config_file)
+
+base_path = ['service', 'dns', 'dynamic']
+timeout_path = base_path + ['timeout']
+address_path = base_path + ['address']
+
+if not config.exists(base_path):
+ # Nothing to do
+ sys.exit(0)
+
+# Migrate "service dns dynamic timeout ..."
+# to "service dns dynamic interval ..."
+if config.exists(timeout_path):
+ config.rename(timeout_path, 'interval')
+
+# Remove "service dns dynamic address <interface> web-options ..." when <interface> != "web"
+for address in config.list_nodes(address_path):
+ if config.exists(address_path + [address, 'web-options']) and address != 'web':
+ config.delete(address_path + [address, 'web-options'])
+
+# Migrate "service dns dynamic address <interface> service <service> protocol dnsexit"
+# to "service dns dynamic address <interface> service <service> protocol dnsexit2"
+for address in config.list_nodes(address_path):
+ for svc_cfg in config.list_nodes(address_path + [address, 'service']):
+ if config.exists(address_path + [address, 'service', svc_cfg, 'protocol']):
+ protocol = config.return_value(address_path + [address, 'service', svc_cfg, 'protocol'])
+ if protocol == 'dnsexit':
+ config.set(address_path + [address, 'service', svc_cfg, 'protocol'], 'dnsexit2')
+
+try:
+ with open(file_name, 'w') as f:
+ f.write(config.to_string())
+except OSError as e:
+ print("Failed to save the modified config: {}".format(e))
+ sys.exit(1)
diff --git a/src/validators/ddclient-protocol b/src/validators/ddclient-protocol
index bc6826120..8f455e12e 100755
--- a/src/validators/ddclient-protocol
+++ b/src/validators/ddclient-protocol
@@ -14,7 +14,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-ddclient -list-protocols | grep -vE 'nsupdate|cloudns' | grep -qw $1
+ddclient -list-protocols | grep -vE 'nsupdate|cloudns|porkbun' | grep -qw $1
if [ $? -gt 0 ]; then
echo "Error: $1 is not a valid protocol, please choose from the supported list of protocols"
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 14:03:11 +0000