diff options
Diffstat (limited to 'src')
34 files changed, 49 insertions, 7320 deletions
diff --git a/src/conf_mode/interfaces-ethernet.py b/src/conf_mode/interfaces-ethernet.py index 31cfab368..9d2ea2eeb 100755 --- a/src/conf_mode/interfaces-ethernet.py +++ b/src/conf_mode/interfaces-ethernet.py @@ -145,12 +145,6 @@ def verify(ethernet): raise ConfigError('Xen netback drivers requires scatter-gatter offloading '\ 'for MTU size larger then 1500 bytes') - # XDP requires multiple TX queues - if 'xdp' in ethernet: - queues = glob(f'/sys/class/net/{ifname}/queues/tx-*') - if len(queues) < 2: - raise ConfigError('XDP requires additional TX queues, too few available!') - if {'is_bond_member', 'mac'} <= set(ethernet): Warning(f'changing mac address "{mac}" will be ignored as "{ifname}" ' \ f'is a member of bond "{is_bond_member}"'.format(**ethernet)) diff --git a/src/migration-scripts/interfaces/27-to-28 b/src/migration-scripts/interfaces/27-to-28 index 6225d6414..e36c95cc9 100755 --- a/src/migration-scripts/interfaces/27-to-28 +++ b/src/migration-scripts/interfaces/27-to-28 @@ -37,7 +37,6 @@ if not config.exists(base): exit(0) for ifname in config.list_nodes(base): - print(ifname) multicast_base = base + [ifname, 'multicast'] if config.exists(multicast_base): tmp = config.return_value(multicast_base) diff --git a/src/migration-scripts/interfaces/28-to-29 b/src/migration-scripts/interfaces/28-to-29 new file mode 100755 index 000000000..64c649b02 --- /dev/null +++ b/src/migration-scripts/interfaces/28-to-29 @@ -0,0 +1,49 @@ +#!/usr/bin/env python3 +# +# Copyright (C) 2023 VyOS maintainers and contributors +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 or later as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# T5286: remove XDP support in favour of VPP + +from sys import argv + +from vyos.ethtool import Ethtool +from vyos.configtree import ConfigTree + +if (len(argv) < 1): + print("Must specify file name!") + exit(1) + +file_name = argv[1] +with open(file_name, 'r') as f: + config_file = f.read() + +supports_xdp = ['bonding', 'ethernet'] +config = ConfigTree(config_file) + +for if_type in supports_xdp: + base = ['interfaces', if_type] + if not config.exists(base): + continue + for interface in config.list_nodes(base): + if_base = base + [interface] + if config.exists(if_base + ['xdp']): + config.delete(if_base + ['xdp']) + +try: + with open(file_name, 'w') as f: + f.write(config.to_string()) +except OSError as e: + print(f'Failed to save the modified config: {e}') + exit(1) diff --git a/src/op_mode/show_xdp_stats.sh b/src/op_mode/show_xdp_stats.sh deleted file mode 100755 index a4ef33107..000000000 --- a/src/op_mode/show_xdp_stats.sh +++ /dev/null @@ -1,7 +0,0 @@ -#!/bin/sh - -if cli-shell-api existsEffective interfaces $1 $2 xdp; then - /usr/sbin/xdp_stats --dev "$2" -else - echo "XDP not enabled on $2" -fi diff --git a/src/xdp/.gitignore b/src/xdp/.gitignore deleted file mode 100644 index 2c931cf47..000000000 --- a/src/xdp/.gitignore +++ /dev/null @@ -1,5 +0,0 @@ -*.o -*.ll -xdp_loader -xdp_prog_user -xdp_stats diff --git a/src/xdp/Makefile b/src/xdp/Makefile deleted file mode 100644 index 0b5a6eaa0..000000000 --- a/src/xdp/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - -XDP_TARGETS := xdp_prog_kern -USER_TARGETS := xdp_prog_user - -COMMON_DIR = common - -COPY_LOADER := xdp_loader -COPY_STATS := xdp_stats -EXTRA_DEPS := $(COMMON_DIR)/parsing_helpers.h - -include $(COMMON_DIR)/common.mk diff --git a/src/xdp/common/Makefile b/src/xdp/common/Makefile deleted file mode 100644 index 2502027e9..000000000 --- a/src/xdp/common/Makefile +++ /dev/null @@ -1,23 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0) -CC := gcc - -all: common_params.o common_user_bpf_xdp.o common_libbpf.o - -CFLAGS := -g -Wall - -CFLAGS += -I../include/ -# TODO: Do we need to make libbpf from this make file too? - -common_params.o: common_params.c common_params.h - $(CC) $(CFLAGS) -c -o $@ $< - -common_user_bpf_xdp.o: common_user_bpf_xdp.c common_user_bpf_xdp.h - $(CC) $(CFLAGS) -c -o $@ $< - -common_libbpf.o: common_libbpf.c common_libbpf.h - $(CC) $(CFLAGS) -c -o $@ $< - -.PHONY: clean - -clean: - rm -f *.o diff --git a/src/xdp/common/README.org b/src/xdp/common/README.org deleted file mode 100644 index 561fdbced..000000000 --- a/src/xdp/common/README.org +++ /dev/null @@ -1,8 +0,0 @@ -# -*- fill-column: 76; -*- -#+TITLE: Common files -#+OPTIONS: ^:nil - -This directory contains code that is common between the different -assignments. This reduce code duplication in each tutorial assignment, and -allow us to hideaway code that is irrelevant or have been seen/introduced in -earlier assignments. diff --git a/src/xdp/common/common.mk b/src/xdp/common/common.mk deleted file mode 100644 index ffb86a65c..000000000 --- a/src/xdp/common/common.mk +++ /dev/null @@ -1,103 +0,0 @@ -# Common Makefile parts for BPF-building with libbpf -# -------------------------------------------------- -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -# -# This file should be included from your Makefile like: -# COMMON_DIR = ../common/ -# include $(COMMON_DIR)/common.mk -# -# It is expected that you define the variables: -# XDP_TARGETS and USER_TARGETS -# as a space-separated list -# -LLC ?= llc -CLANG ?= clang -CC ?= gcc - -XDP_C = ${XDP_TARGETS:=.c} -XDP_OBJ = ${XDP_C:.c=.o} -USER_C := ${USER_TARGETS:=.c} -USER_OBJ := ${USER_C:.c=.o} - -# Expect this is defined by including Makefile, but define if not -COMMON_DIR ?= ../common/ - -COPY_LOADER ?= -LOADER_DIR ?= $(COMMON_DIR)/../utils - -# Extend if including Makefile already added some -COMMON_OBJS += $(COMMON_DIR)/common_params.o $(COMMON_DIR)/common_user_bpf_xdp.o - -# Create expansions for dependencies -COMMON_H := ${COMMON_OBJS:.o=.h} - -EXTRA_DEPS += - -# BPF-prog kern and userspace shares struct via header file: -KERN_USER_H ?= $(wildcard common_kern_user.h) - -CFLAGS ?= -g -I../include/ -BPF_CFLAGS ?= -I../include/ - -LIBS = -lbpf -lelf $(USER_LIBS) - -all: llvm-check $(USER_TARGETS) $(XDP_OBJ) $(COPY_LOADER) $(COPY_STATS) - -.PHONY: clean $(CLANG) $(LLC) - -clean: - $(MAKE) -C $(COMMON_DIR) clean - rm -f $(USER_TARGETS) $(XDP_OBJ) $(USER_OBJ) $(COPY_LOADER) $(COPY_STATS) - rm -f *.ll - rm -f *~ - -ifdef COPY_LOADER -$(COPY_LOADER): $(LOADER_DIR)/${COPY_LOADER:=.c} $(COMMON_H) - make -C $(LOADER_DIR) $(COPY_LOADER) - cp $(LOADER_DIR)/$(COPY_LOADER) $(COPY_LOADER) -endif - -ifdef COPY_STATS -$(COPY_STATS): $(LOADER_DIR)/${COPY_STATS:=.c} $(COMMON_H) - make -C $(LOADER_DIR) $(COPY_STATS) - cp $(LOADER_DIR)/$(COPY_STATS) $(COPY_STATS) -# Needing xdp_stats imply depending on header files: -EXTRA_DEPS += $(COMMON_DIR)/xdp_stats_kern.h $(COMMON_DIR)/xdp_stats_kern_user.h -endif - -# For build dependency on this file, if it gets updated -COMMON_MK = $(COMMON_DIR)/common.mk - -llvm-check: $(CLANG) $(LLC) - @for TOOL in $^ ; do \ - if [ ! $$(command -v $${TOOL} 2>/dev/null) ]; then \ - echo "*** ERROR: Cannot find tool $${TOOL}" ;\ - exit 1; \ - else true; fi; \ - done - -# Create dependency: detect if C-file change and touch H-file, to trigger -# target $(COMMON_OBJS) -$(COMMON_H): %.h: %.c - touch $@ - -# Detect if any of common obj changed and create dependency on .h-files -$(COMMON_OBJS): %.o: %.h - make -C $(COMMON_DIR) - -$(USER_TARGETS): %: %.c Makefile $(COMMON_MK) $(COMMON_OBJS) $(KERN_USER_H) $(EXTRA_DEPS) - $(CC) -Wall $(CFLAGS) $(LDFLAGS) -o $@ $(COMMON_OBJS) \ - $< $(LIBS) - -$(XDP_OBJ): %.o: %.c Makefile $(COMMON_MK) $(KERN_USER_H) $(EXTRA_DEPS) - $(CLANG) -S \ - -target bpf \ - -D __BPF_TRACING__ \ - $(BPF_CFLAGS) \ - -Wall \ - -Wno-unused-value \ - -Wno-pointer-sign \ - -Wno-compare-distinct-pointer-types \ - -Werror \ - -O2 -emit-llvm -c -g -o ${@:.o=.ll} $< - $(LLC) -march=bpf -filetype=obj -o $@ ${@:.o=.ll} diff --git a/src/xdp/common/common_defines.h b/src/xdp/common/common_defines.h deleted file mode 100644 index 2986d2d67..000000000 --- a/src/xdp/common/common_defines.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef __COMMON_DEFINES_H -#define __COMMON_DEFINES_H - -#include <net/if.h> -#include <linux/types.h> -#include <stdbool.h> - -struct config { - __u32 xdp_flags; - int ifindex; - char *ifname; - char ifname_buf[IF_NAMESIZE]; - int redirect_ifindex; - char *redirect_ifname; - char redirect_ifname_buf[IF_NAMESIZE]; - bool do_unload; - bool reuse_maps; - char pin_dir[512]; - char filename[512]; - char progsec[32]; - char src_mac[18]; - char dest_mac[18]; - __u16 xsk_bind_flags; - int xsk_if_queue; - bool xsk_poll_mode; -}; - -/* Defined in common_params.o */ -extern int verbose; - -/* Exit return codes */ -#define EXIT_OK 0 /* == EXIT_SUCCESS (stdlib.h) man exit(3) */ -#define EXIT_FAIL 1 /* == EXIT_FAILURE (stdlib.h) man exit(3) */ -#define EXIT_FAIL_OPTION 2 -#define EXIT_FAIL_XDP 30 -#define EXIT_FAIL_BPF 40 - -#endif /* __COMMON_DEFINES_H */ diff --git a/src/xdp/common/common_libbpf.c b/src/xdp/common/common_libbpf.c deleted file mode 100644 index 443ca4c66..000000000 --- a/src/xdp/common/common_libbpf.c +++ /dev/null @@ -1,161 +0,0 @@ -/* Common function that with time should be moved to libbpf */ - -#include <errno.h> -#include <string.h> - -#include <bpf/bpf.h> -#include <bpf/libbpf.h> - -#include "common_libbpf.h" - -/* From: include/linux/err.h */ -#define MAX_ERRNO 4095 -#define IS_ERR_VALUE(x) ((x) >= (unsigned long)-MAX_ERRNO) -static inline bool IS_ERR_OR_NULL(const void *ptr) -{ - return (!ptr) || IS_ERR_VALUE((unsigned long)ptr); -} - -#define pr_warning printf - -/* As close as possible to libbpf bpf_prog_load_xattr(), with the - * difference of handling pinned maps. - */ -int bpf_prog_load_xattr_maps(const struct bpf_prog_load_attr_maps *attr, - struct bpf_object **pobj, int *prog_fd) -{ - struct bpf_program *prog, *first_prog = NULL; - enum bpf_attach_type expected_attach_type; - enum bpf_prog_type prog_type; - struct bpf_object *obj; - struct bpf_map *map; - int err; - int i; - - if (!attr) - return -EINVAL; - if (!attr->file) - return -EINVAL; - - obj = bpf_object__open_file(attr->file, NULL); - - if (libbpf_get_error(obj)) - return -EINVAL; - - prog = bpf_object__next_program(obj, NULL); - bpf_program__set_type(prog, attr->prog_type); - - bpf_object__for_each_program(prog, obj) { - /* - * If type is not specified, try to guess it based on - * section name. - */ - prog_type = attr->prog_type; - // Was: prog->prog_ifindex = attr->ifindex; - bpf_program__set_ifindex(prog, attr->ifindex); - - expected_attach_type = attr->expected_attach_type; -#if 0 /* Use internal libbpf variables */ - if (prog_type == BPF_PROG_TYPE_UNSPEC) { - err = bpf_program__identify_section(prog, &prog_type, - &expected_attach_type); - if (err < 0) { - bpf_object__close(obj); - return -EINVAL; - } - } -#endif - - bpf_program__set_type(prog, prog_type); - bpf_program__set_expected_attach_type(prog, - expected_attach_type); - - if (!first_prog) - first_prog = prog; - } - - /* Reset attr->pinned_maps.map_fd to identify successful file load */ - for (i = 0; i < attr->nr_pinned_maps; i++) - attr->pinned_maps[i].map_fd = -1; - - bpf_map__for_each(map, obj) { - const char* mapname = bpf_map__name(map); - - if (bpf_map__type(map) != BPF_MAP_TYPE_PERF_EVENT_ARRAY) - bpf_map__set_ifindex(map, attr->ifindex); - /* Was: map->map_ifindex = attr->ifindex; */ - - for (i = 0; i < attr->nr_pinned_maps; i++) { - struct bpf_pinned_map *pin_map = &attr->pinned_maps[i]; - int fd; - - if (strcmp(mapname, pin_map->name) != 0) - continue; - - /* Matched, try opening pinned file */ - fd = bpf_obj_get(pin_map->filename); - if (fd > 0) { - /* Use FD from pinned map as replacement */ - bpf_map__reuse_fd(map, fd); - /* TODO: Might want to set internal map "name" - * if opened pinned map didn't, to allow - * bpf_object__find_map_fd_by_name() to work. - */ - pin_map->map_fd = fd; - continue; - } - /* Could not open pinned filename map, then this prog - * should then pin the map, BUT this can only happen - * after bpf_object__load(). - */ - } - } - - if (!first_prog) { - pr_warning("object file doesn't contain bpf program\n"); - bpf_object__close(obj); - return -ENOENT; - } - - err = bpf_object__load(obj); - if (err) { - bpf_object__close(obj); - return -EINVAL; - } - - /* Pin the maps that were not loaded via pinned filename */ - bpf_map__for_each(map, obj) { - const char* mapname = bpf_map__name(map); - - for (i = 0; i < attr->nr_pinned_maps; i++) { - struct bpf_pinned_map *pin_map = &attr->pinned_maps[i]; - int err; - - if (strcmp(mapname, pin_map->name) != 0) - continue; - - /* Matched, check if map is already loaded */ - if (pin_map->map_fd != -1) - continue; - - /* Needs to be pinned */ - err = bpf_map__pin(map, pin_map->filename); - if (err) - continue; - pin_map->map_fd = bpf_map__fd(map); - } - } - - /* Help user if requested map name that doesn't exist */ - for (i = 0; i < attr->nr_pinned_maps; i++) { - struct bpf_pinned_map *pin_map = &attr->pinned_maps[i]; - - if (pin_map->map_fd < 0) - pr_warning("%s() requested mapname:%s not seen\n", - __func__, pin_map->name); - } - - *pobj = obj; - *prog_fd = bpf_program__fd(first_prog); - return 0; -} diff --git a/src/xdp/common/common_libbpf.h b/src/xdp/common/common_libbpf.h deleted file mode 100644 index 4754bd8ca..000000000 --- a/src/xdp/common/common_libbpf.h +++ /dev/null @@ -1,24 +0,0 @@ -/* Common function that with time should be moved to libbpf */ -#ifndef __COMMON_LIBBPF_H -#define __COMMON_LIBBPF_H - -struct bpf_pinned_map { - const char *name; - const char *filename; - int map_fd; -}; - -/* bpf_prog_load_attr extended */ -struct bpf_prog_load_attr_maps { - const char *file; - enum bpf_prog_type prog_type; - enum bpf_attach_type expected_attach_type; - int ifindex; - int nr_pinned_maps; - struct bpf_pinned_map *pinned_maps; -}; - -int bpf_prog_load_xattr_maps(const struct bpf_prog_load_attr_maps *attr, - struct bpf_object **pobj, int *prog_fd); - -#endif /* __COMMON_LIBBPF_H */ diff --git a/src/xdp/common/common_params.c b/src/xdp/common/common_params.c deleted file mode 100644 index 642d56d92..000000000 --- a/src/xdp/common/common_params.c +++ /dev/null @@ -1,197 +0,0 @@ -#include <stddef.h> -#include <stdlib.h> -#include <stdio.h> -#include <string.h> -#include <stdbool.h> -#include <getopt.h> -#include <errno.h> - -#include <net/if.h> -#include <linux/if_link.h> /* XDP_FLAGS_* depend on kernel-headers installed */ -#include <linux/if_xdp.h> - -#include "common_params.h" - -int verbose = 1; - -#define BUFSIZE 30 - -void _print_options(const struct option_wrapper *long_options, bool required) -{ - int i, pos; - char buf[BUFSIZE]; - - for (i = 0; long_options[i].option.name != 0; i++) { - if (long_options[i].required != required) - continue; - - if (long_options[i].option.val > 64) /* ord('A') = 65 */ - printf(" -%c,", long_options[i].option.val); - else - printf(" "); - pos = snprintf(buf, BUFSIZE, " --%s", long_options[i].option.name); - if (long_options[i].metavar) - snprintf(&buf[pos], BUFSIZE-pos, " %s", long_options[i].metavar); - printf("%-22s", buf); - printf(" %s", long_options[i].help); - printf("\n"); - } -} - -void usage(const char *prog_name, const char *doc, - const struct option_wrapper *long_options, bool full) -{ - printf("Usage: %s [options]\n", prog_name); - - if (!full) { - printf("Use --help (or -h) to see full option list.\n"); - return; - } - - printf("\nDOCUMENTATION:\n %s\n", doc); - printf("Required options:\n"); - _print_options(long_options, true); - printf("\n"); - printf("Other options:\n"); - _print_options(long_options, false); - printf("\n"); -} - -int option_wrappers_to_options(const struct option_wrapper *wrapper, - struct option **options) -{ - int i, num; - struct option *new_options; - for (i = 0; wrapper[i].option.name != 0; i++) {} - num = i; - - new_options = malloc(sizeof(struct option) * num); - if (!new_options) - return -1; - for (i = 0; i < num; i++) { - memcpy(&new_options[i], &wrapper[i], sizeof(struct option)); - } - - *options = new_options; - return 0; -} - -void parse_cmdline_args(int argc, char **argv, - const struct option_wrapper *options_wrapper, - struct config *cfg, const char *doc) -{ - struct option *long_options; - bool full_help = false; - int longindex = 0; - char *dest; - int opt; - - if (option_wrappers_to_options(options_wrapper, &long_options)) { - fprintf(stderr, "Unable to malloc()\n"); - exit(EXIT_FAIL_OPTION); - } - - /* Parse commands line args */ - while ((opt = getopt_long(argc, argv, "hd:r:L:R:ASNFUMQ:czpq", - long_options, &longindex)) != -1) { - switch (opt) { - case 'd': - if (strlen(optarg) >= IF_NAMESIZE) { - fprintf(stderr, "ERR: --dev name too long\n"); - goto error; - } - cfg->ifname = (char *)&cfg->ifname_buf; - strncpy(cfg->ifname, optarg, IF_NAMESIZE); - cfg->ifindex = if_nametoindex(cfg->ifname); - if (cfg->ifindex == 0) { - fprintf(stderr, - "ERR: --dev name unknown err(%d):%s\n", - errno, strerror(errno)); - goto error; - } - break; - case 'r': - if (strlen(optarg) >= IF_NAMESIZE) { - fprintf(stderr, "ERR: --redirect-dev name too long\n"); - goto error; - } - cfg->redirect_ifname = (char *)&cfg->redirect_ifname_buf; - strncpy(cfg->redirect_ifname, optarg, IF_NAMESIZE); - cfg->redirect_ifindex = if_nametoindex(cfg->redirect_ifname); - if (cfg->redirect_ifindex == 0) { - fprintf(stderr, - "ERR: --redirect-dev name unknown err(%d):%s\n", - errno, strerror(errno)); - goto error; - } - break; - case 'A': - cfg->xdp_flags &= ~XDP_FLAGS_MODES; /* Clear flags */ - break; - case 'S': - cfg->xdp_flags &= ~XDP_FLAGS_MODES; /* Clear flags */ - cfg->xdp_flags |= XDP_FLAGS_SKB_MODE; /* Set flag */ - cfg->xsk_bind_flags &= XDP_ZEROCOPY; - cfg->xsk_bind_flags |= XDP_COPY; - break; - case 'N': - cfg->xdp_flags &= ~XDP_FLAGS_MODES; /* Clear flags */ - cfg->xdp_flags |= XDP_FLAGS_DRV_MODE; /* Set flag */ - break; - case 3: /* --offload-mode */ - cfg->xdp_flags &= ~XDP_FLAGS_MODES; /* Clear flags */ - cfg->xdp_flags |= XDP_FLAGS_HW_MODE; /* Set flag */ - break; - case 'F': - cfg->xdp_flags &= ~XDP_FLAGS_UPDATE_IF_NOEXIST; - break; - case 'M': - cfg->reuse_maps = true; - break; - case 'U': - cfg->do_unload = true; - break; - case 'p': - cfg->xsk_poll_mode = true; - break; - case 'q': - verbose = false; - break; - case 'Q': - cfg->xsk_if_queue = atoi(optarg); - break; - case 1: /* --filename */ - dest = (char *)&cfg->filename; - strncpy(dest, optarg, sizeof(cfg->filename)); - break; - case 2: /* --progsec */ - dest = (char *)&cfg->progsec; - strncpy(dest, optarg, sizeof(cfg->progsec)); - break; - case 'L': /* --src-mac */ - dest = (char *)&cfg->src_mac; - strncpy(dest, optarg, sizeof(cfg->src_mac)); - break; - case 'R': /* --dest-mac */ - dest = (char *)&cfg->dest_mac; - strncpy(dest, optarg, sizeof(cfg->dest_mac)); - case 'c': - cfg->xsk_bind_flags &= XDP_ZEROCOPY; - cfg->xsk_bind_flags |= XDP_COPY; - break; - case 'z': - cfg->xsk_bind_flags &= XDP_COPY; - cfg->xsk_bind_flags |= XDP_ZEROCOPY; - break; - case 'h': - full_help = true; - /* fall-through */ - error: - default: - usage(argv[0], doc, options_wrapper, full_help); - free(long_options); - exit(EXIT_FAIL_OPTION); - } - } - free(long_options); -} diff --git a/src/xdp/common/common_params.h b/src/xdp/common/common_params.h deleted file mode 100644 index 6f64c82e3..000000000 --- a/src/xdp/common/common_params.h +++ /dev/null @@ -1,22 +0,0 @@ -/* This common_user.h is used by userspace programs */ -#ifndef __COMMON_PARAMS_H -#define __COMMON_PARAMS_H - -#include <getopt.h> -#include "common_defines.h" - -struct option_wrapper { - struct option option; - char *help; - char *metavar; - bool required; -}; - -void usage(const char *prog_name, const char *doc, - const struct option_wrapper *long_options, bool full); - -void parse_cmdline_args(int argc, char **argv, - const struct option_wrapper *long_options, - struct config *cfg, const char *doc); - -#endif /* __COMMON_PARAMS_H */ diff --git a/src/xdp/common/common_user_bpf_xdp.c b/src/xdp/common/common_user_bpf_xdp.c deleted file mode 100644 index 524f08c9d..000000000 --- a/src/xdp/common/common_user_bpf_xdp.c +++ /dev/null @@ -1,389 +0,0 @@ -#include <bpf/libbpf.h> /* bpf_get_link_xdp_id + bpf_set_link_xdp_id */ -#include <string.h> /* strerror */ -#include <net/if.h> /* IF_NAMESIZE */ -#include <stdlib.h> /* exit(3) */ -#include <errno.h> - -#include <bpf/bpf.h> -#include <bpf/libbpf.h> - -#include <linux/if_link.h> /* Need XDP flags */ -#include <linux/err.h> - -#include "common_defines.h" - -#ifndef PATH_MAX -#define PATH_MAX 4096 -#endif - -int xdp_link_attach(int ifindex, __u32 xdp_flags, int prog_fd) -{ - int err; - - /* libbpf provide the XDP net_device link-level hook attach helper */ - err = bpf_xdp_attach(ifindex, prog_fd, xdp_flags, NULL); - if (err == -EEXIST && !(xdp_flags & XDP_FLAGS_UPDATE_IF_NOEXIST)) { - /* Force mode didn't work, probably because a program of the - * opposite type is loaded. Let's unload that and try loading - * again. - */ - - __u32 old_flags = xdp_flags; - - xdp_flags &= ~XDP_FLAGS_MODES; - xdp_flags |= (old_flags & XDP_FLAGS_SKB_MODE) ? XDP_FLAGS_DRV_MODE : XDP_FLAGS_SKB_MODE; - err = bpf_xdp_detach(ifindex, xdp_flags, NULL); - if (!err) - err = bpf_xdp_attach(ifindex, prog_fd, old_flags, NULL); - } - if (err < 0) { - fprintf(stderr, "ERR: " - "ifindex(%d) link set xdp fd failed (%d): %s\n", - ifindex, -err, strerror(-err)); - - switch (-err) { - case EBUSY: - case EEXIST: - fprintf(stderr, "Hint: XDP already loaded on device" - " use --force to swap/replace\n"); - break; - case EOPNOTSUPP: - fprintf(stderr, "Hint: Native-XDP not supported" - " use --skb-mode or --auto-mode\n"); - break; - default: - break; - } - return EXIT_FAIL_XDP; - } - - return EXIT_OK; -} - -int xdp_link_detach(int ifindex, __u32 xdp_flags, __u32 expected_prog_id) -{ - __u32 curr_prog_id; - int err; - - err = bpf_xdp_query_id(ifindex, xdp_flags, &curr_prog_id); - if (err) { - fprintf(stderr, "ERR: get link xdp id failed (err=%d): %s\n", - -err, strerror(-err)); - return EXIT_FAIL_XDP; - } - - if (!curr_prog_id) { - if (verbose) - printf("INFO: %s() no curr XDP prog on ifindex:%d\n", - __func__, ifindex); - return EXIT_OK; - } - - if (expected_prog_id && curr_prog_id != expected_prog_id) { - fprintf(stderr, "ERR: %s() " - "expected prog ID(%d) no match(%d), not removing\n", - __func__, expected_prog_id, curr_prog_id); - return EXIT_FAIL; - } - - if ((err = bpf_xdp_detach(ifindex, xdp_flags, NULL)) < 0) { - fprintf(stderr, "ERR: %s() link set xdp failed (err=%d): %s\n", - __func__, err, strerror(-err)); - return EXIT_FAIL_XDP; - } - - if (verbose) - printf("INFO: %s() removed XDP prog ID:%d on ifindex:%d\n", - __func__, curr_prog_id, ifindex); - - return EXIT_OK; -} - -struct bpf_object *load_bpf_object_file(const char *filename, int ifindex) -{ - int first_prog_fd = -1; - struct bpf_object *obj; - int err; - - /* This struct allow us to set ifindex, this features is used for - * hardware offloading XDP programs (note this sets libbpf - * bpf_program->prog_ifindex and foreach bpf_map->map_ifindex). - */ - struct bpf_program *prog; - obj = bpf_object__open_file(filename, NULL); - - if (libbpf_get_error(obj)) - return NULL; - - prog = bpf_object__next_program(obj, NULL); - bpf_program__set_type(prog, BPF_PROG_TYPE_XDP); - bpf_program__set_ifindex(prog, ifindex); - - /* Use libbpf for extracting BPF byte-code from BPF-ELF object, and - * loading this into the kernel via bpf-syscall - */ - err = bpf_object__load(obj); - if (err) { - fprintf(stderr, "ERR: loading BPF-OBJ file(%s) (%d): %s\n", - filename, err, strerror(-err)); - return NULL; - } - - first_prog_fd = bpf_program__fd(prog); - - /* Notice how a pointer to a libbpf bpf_object is returned */ - return obj; -} - -static struct bpf_object *open_bpf_object(const char *file, int ifindex) -{ - int err; - struct bpf_object *obj; - struct bpf_map *map; - struct bpf_program *prog, *first_prog = NULL; - - obj = bpf_object__open_file(file, NULL); - - if (libbpf_get_error(obj)) - return NULL; - - prog = bpf_object__next_program(obj, NULL); - bpf_program__set_type(prog, BPF_PROG_TYPE_XDP); - - err = bpf_object__load(obj); - if (IS_ERR_OR_NULL(obj)) { - err = -PTR_ERR(obj); - fprintf(stderr, "ERR: opening BPF-OBJ file(%s) (%d): %s\n", - file, err, strerror(-err)); - return NULL; - } - - bpf_object__for_each_program(prog, obj) { - bpf_program__set_type(prog, BPF_PROG_TYPE_XDP); - bpf_program__set_ifindex(prog, ifindex); - if (!first_prog) - first_prog = prog; - } - - bpf_object__for_each_map(map, obj) { - if (bpf_map__type(map) != BPF_MAP_TYPE_PERF_EVENT_ARRAY) - bpf_map__set_ifindex(map, ifindex); - } - - if (!first_prog) { - fprintf(stderr, "ERR: file %s contains no programs\n", file); - return NULL; - } - - return obj; -} - -static int reuse_maps(struct bpf_object *obj, const char *path) -{ - struct bpf_map *map; - - if (!obj) - return -ENOENT; - - if (!path) - return -EINVAL; - - bpf_object__for_each_map(map, obj) { - int len, err; - int pinned_map_fd; - char buf[PATH_MAX]; - - len = snprintf(buf, PATH_MAX, "%s/%s", path, bpf_map__name(map)); - if (len < 0) { - return -EINVAL; - } else if (len >= PATH_MAX) { - return -ENAMETOOLONG; - } - - pinned_map_fd = bpf_obj_get(buf); - if (pinned_map_fd < 0) - return pinned_map_fd; - - err = bpf_map__reuse_fd(map, pinned_map_fd); - if (err) - return err; - } - - return 0; -} - -struct bpf_object *load_bpf_object_file_reuse_maps(const char *file, - int ifindex, - const char *pin_dir) -{ - int err; - struct bpf_object *obj; - - obj = open_bpf_object(file, ifindex); - if (!obj) { - fprintf(stderr, "ERR: failed to open object %s\n", file); - return NULL; - } - - err = reuse_maps(obj, pin_dir); - if (err) { - fprintf(stderr, "ERR: failed to reuse maps for object %s, pin_dir=%s\n", - file, pin_dir); - return NULL; - } - - err = bpf_object__load(obj); - if (err) { - fprintf(stderr, "ERR: loading BPF-OBJ file(%s) (%d): %s\n", - file, err, strerror(-err)); - return NULL; - } - - return obj; -} - -struct bpf_object *load_bpf_and_xdp_attach(struct config *cfg) -{ - struct bpf_program *bpf_prog; - struct bpf_object *bpf_obj; - int offload_ifindex = 0; - int prog_fd = -1; - int err; - - /* If flags indicate hardware offload, supply ifindex */ - if (cfg->xdp_flags & XDP_FLAGS_HW_MODE) - offload_ifindex = cfg->ifindex; - - /* Load the BPF-ELF object file and get back libbpf bpf_object */ - if (cfg->reuse_maps) - bpf_obj = load_bpf_object_file_reuse_maps(cfg->filename, - offload_ifindex, - cfg->pin_dir); - else - bpf_obj = load_bpf_object_file(cfg->filename, offload_ifindex); - if (!bpf_obj) { - fprintf(stderr, "ERR: loading file: %s\n", cfg->filename); - exit(EXIT_FAIL_BPF); - } - /* At this point: All XDP/BPF programs from the cfg->filename have been - * loaded into the kernel, and evaluated by the verifier. Only one of - * these gets attached to XDP hook, the others will get freed once this - * process exit. - */ - - if (cfg->progsec[0]) - /* Find a matching BPF prog section name */ - bpf_prog = bpf_object__find_program_by_name(bpf_obj, cfg->progsec); - else - /* Find the first program */ - bpf_prog = bpf_object__next_program(bpf_obj, NULL); - - if (!bpf_prog) { - fprintf(stderr, "ERR: couldn't find a program in ELF section '%s'\n", cfg->progsec); - exit(EXIT_FAIL_BPF); - } - - strncpy(cfg->progsec, bpf_program__section_name(bpf_prog), sizeof(cfg->progsec)); - - prog_fd = bpf_program__fd(bpf_prog); - if (prog_fd <= 0) { - fprintf(stderr, "ERR: bpf_program__fd failed\n"); - exit(EXIT_FAIL_BPF); - } - - /* At this point: BPF-progs are (only) loaded by the kernel, and prog_fd - * is our select file-descriptor handle. Next step is attaching this FD - * to a kernel hook point, in this case XDP net_device link-level hook. - */ - err = xdp_link_attach(cfg->ifindex, cfg->xdp_flags, prog_fd); - if (err) - exit(err); - - return bpf_obj; -} - -#define XDP_UNKNOWN XDP_REDIRECT + 1 -#ifndef XDP_ACTION_MAX -#define XDP_ACTION_MAX (XDP_UNKNOWN + 1) -#endif - -static const char *xdp_action_names[XDP_ACTION_MAX] = { - [XDP_ABORTED] = "XDP_ABORTED", - [XDP_DROP] = "XDP_DROP", - [XDP_PASS] = "XDP_PASS", - [XDP_TX] = "XDP_TX", - [XDP_REDIRECT] = "XDP_REDIRECT", - [XDP_UNKNOWN] = "XDP_UNKNOWN", -}; - -const char *action2str(__u32 action) -{ - if (action < XDP_ACTION_MAX) - return xdp_action_names[action]; - return NULL; -} - -int check_map_fd_info(const struct bpf_map_info *info, - const struct bpf_map_info *exp) -{ - if (exp->key_size && exp->key_size != info->key_size) { - fprintf(stderr, "ERR: %s() " - "Map key size(%d) mismatch expected size(%d)\n", - __func__, info->key_size, exp->key_size); - return EXIT_FAIL; - } - if (exp->value_size && exp->value_size != info->value_size) { - fprintf(stderr, "ERR: %s() " - "Map value size(%d) mismatch expected size(%d)\n", - __func__, info->value_size, exp->value_size); - return EXIT_FAIL; - } - if (exp->max_entries && exp->max_entries != info->max_entries) { - fprintf(stderr, "ERR: %s() " - "Map max_entries(%d) mismatch expected size(%d)\n", - __func__, info->max_entries, exp->max_entries); - return EXIT_FAIL; - } - if (exp->type && exp->type != info->type) { - fprintf(stderr, "ERR: %s() " - "Map type(%d) mismatch expected type(%d)\n", - __func__, info->type, exp->type); - return EXIT_FAIL; - } - - return 0; -} - -int open_bpf_map_file(const char *pin_dir, - const char *mapname, - struct bpf_map_info *info) -{ - char filename[PATH_MAX]; - int err, len, fd; - __u32 info_len = sizeof(*info); - - len = snprintf(filename, PATH_MAX, "%s/%s", pin_dir, mapname); - if (len < 0) { - fprintf(stderr, "ERR: constructing full mapname path\n"); - return -1; - } - - fd = bpf_obj_get(filename); - if (fd < 0) { - fprintf(stderr, - "WARN: Failed to open bpf map file:%s err(%d):%s\n", - filename, errno, strerror(errno)); - return fd; - } - - if (info) { - err = bpf_obj_get_info_by_fd(fd, info, &info_len); - if (err) { - fprintf(stderr, "ERR: %s() can't get info - %s\n", - __func__, strerror(errno)); - return EXIT_FAIL_BPF; - } - } - - return fd; -} diff --git a/src/xdp/common/common_user_bpf_xdp.h b/src/xdp/common/common_user_bpf_xdp.h deleted file mode 100644 index 4f8aa51d4..000000000 --- a/src/xdp/common/common_user_bpf_xdp.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Common BPF/XDP functions used by userspace side programs */ -#ifndef __COMMON_USER_BPF_XDP_H -#define __COMMON_USER_BPF_XDP_H - -int xdp_link_attach(int ifindex, __u32 xdp_flags, int prog_fd); -int xdp_link_detach(int ifindex, __u32 xdp_flags, __u32 expected_prog_id); - -struct bpf_object *load_bpf_object_file(const char *filename, int ifindex); -struct bpf_object *load_bpf_and_xdp_attach(struct config *cfg); - -const char *action2str(__u32 action); - -int check_map_fd_info(const struct bpf_map_info *info, - const struct bpf_map_info *exp); - -int open_bpf_map_file(const char *pin_dir, - const char *mapname, - struct bpf_map_info *info); - -#endif /* __COMMON_USER_BPF_XDP_H */ diff --git a/src/xdp/common/parsing_helpers.h b/src/xdp/common/parsing_helpers.h deleted file mode 100644 index c0837e88f..000000000 --- a/src/xdp/common/parsing_helpers.h +++ /dev/null @@ -1,244 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-clause) */ -/* - * This file contains parsing functions that are used in the packetXX XDP - * programs. The functions are marked as __always_inline, and fully defined in - * this header file to be included in the BPF program. - * - * Each helper parses a packet header, including doing bounds checking, and - * returns the type of its contents if successful, and -1 otherwise. - * - * For Ethernet and IP headers, the content type is the type of the payload - * (h_proto for Ethernet, nexthdr for IPv6), for ICMP it is the ICMP type field. - * All return values are in host byte order. - * - * The versions of the functions included here are slightly expanded versions of - * the functions in the packet01 lesson. For instance, the Ethernet header - * parsing has support for parsing VLAN tags. - */ - -#ifndef __PARSING_HELPERS_H -#define __PARSING_HELPERS_H - -#include <stddef.h> -#include <linux/if_ether.h> -#include <linux/if_packet.h> -#include <linux/ip.h> -#include <linux/ipv6.h> -#include <linux/icmp.h> -#include <linux/icmpv6.h> -#include <linux/udp.h> -#include <linux/tcp.h> - -/* Header cursor to keep track of current parsing position */ -struct hdr_cursor { - void *pos; -}; - -/* - * struct vlan_hdr - vlan header - * @h_vlan_TCI: priority and VLAN ID - * @h_vlan_encapsulated_proto: packet type ID or len - */ -struct vlan_hdr { - __be16 h_vlan_TCI; - __be16 h_vlan_encapsulated_proto; -}; - -/* - * Struct icmphdr_common represents the common part of the icmphdr and icmp6hdr - * structures. - */ -struct icmphdr_common { - __u8 type; - __u8 code; - __sum16 cksum; -}; - -/* Allow users of header file to redefine VLAN max depth */ -#ifndef VLAN_MAX_DEPTH -#define VLAN_MAX_DEPTH 4 -#endif - -static __always_inline int proto_is_vlan(__u16 h_proto) -{ - return !!(h_proto == bpf_htons(ETH_P_8021Q) || - h_proto == bpf_htons(ETH_P_8021AD)); -} - -/* Notice, parse_ethhdr() will skip VLAN tags, by advancing nh->pos and returns - * next header EtherType, BUT the ethhdr pointer supplied still points to the - * Ethernet header. Thus, caller can look at eth->h_proto to see if this was a - * VLAN tagged packet. - */ -static __always_inline int parse_ethhdr(struct hdr_cursor *nh, void *data_end, - struct ethhdr **ethhdr) -{ - struct ethhdr *eth = nh->pos; - int hdrsize = sizeof(*eth); - struct vlan_hdr *vlh; - __u16 h_proto; - int i; - - /* Byte-count bounds check; check if current pointer + size of header - * is after data_end. - */ - if (nh->pos + hdrsize > data_end) - return -1; - - nh->pos += hdrsize; - *ethhdr = eth; - vlh = nh->pos; - h_proto = eth->h_proto; - - /* Use loop unrolling to avoid the verifier restriction on loops; - * support up to VLAN_MAX_DEPTH layers of VLAN encapsulation. - */ - #pragma unroll - for (i = 0; i < VLAN_MAX_DEPTH; i++) { - if (!proto_is_vlan(h_proto)) - break; - - if (vlh + 1 > data_end) - break; - - h_proto = vlh->h_vlan_encapsulated_proto; - vlh++; - } - - nh->pos = vlh; - return h_proto; /* network-byte-order */ -} - -static __always_inline int parse_ip6hdr(struct hdr_cursor *nh, - void *data_end, - struct ipv6hdr **ip6hdr) -{ - struct ipv6hdr *ip6h = nh->pos; - - /* Pointer-arithmetic bounds check; pointer +1 points to after end of - * thing being pointed to. We will be using this style in the remainder - * of the tutorial. - */ - if (ip6h + 1 > data_end) - return -1; - - nh->pos = ip6h + 1; - *ip6hdr = ip6h; - - return ip6h->nexthdr; -} - -static __always_inline int parse_iphdr(struct hdr_cursor *nh, - void *data_end, - struct iphdr **iphdr) -{ - struct iphdr *iph = nh->pos; - int hdrsize; - - if (iph + 1 > data_end) - return -1; - - hdrsize = iph->ihl * 4; - - /* Variable-length IPv4 header, need to use byte-based arithmetic */ - if (nh->pos + hdrsize > data_end) - return -1; - - nh->pos += hdrsize; - *iphdr = iph; - - return iph->protocol; -} - -static __always_inline int parse_icmp6hdr(struct hdr_cursor *nh, - void *data_end, - struct icmp6hdr **icmp6hdr) -{ - struct icmp6hdr *icmp6h = nh->pos; - - if (icmp6h + 1 > data_end) - return -1; - - nh->pos = icmp6h + 1; - *icmp6hdr = icmp6h; - - return icmp6h->icmp6_type; -} - -static __always_inline int parse_icmphdr(struct hdr_cursor *nh, - void *data_end, - struct icmphdr **icmphdr) -{ - struct icmphdr *icmph = nh->pos; - - if (icmph + 1 > data_end) - return -1; - - nh->pos = icmph + 1; - *icmphdr = icmph; - - return icmph->type; -} - -static __always_inline int parse_icmphdr_common(struct hdr_cursor *nh, - void *data_end, - struct icmphdr_common **icmphdr) -{ - struct icmphdr_common *h = nh->pos; - - if (h + 1 > data_end) - return -1; - - nh->pos = h + 1; - *icmphdr = h; - - return h->type; -} - -/* - * parse_udphdr: parse the udp header and return the length of the udp payload - */ -static __always_inline int parse_udphdr(struct hdr_cursor *nh, - void *data_end, - struct udphdr **udphdr) -{ - int len; - struct udphdr *h = nh->pos; - - if (h + 1 > data_end) - return -1; - - nh->pos = h + 1; - *udphdr = h; - - len = bpf_ntohs(h->len) - sizeof(struct udphdr); - if (len < 0) - return -1; - - return len; -} - -/* - * parse_tcphdr: parse and return the length of the tcp header - */ -static __always_inline int parse_tcphdr(struct hdr_cursor *nh, - void *data_end, - struct tcphdr **tcphdr) -{ - int len; - struct tcphdr *h = nh->pos; - - if (h + 1 > data_end) - return -1; - - len = h->doff * 4; - if ((void *) h + len > data_end) - return -1; - - nh->pos = h + 1; - *tcphdr = h; - - return len; -} - -#endif /* __PARSING_HELPERS_H */ diff --git a/src/xdp/common/rewrite_helpers.h b/src/xdp/common/rewrite_helpers.h deleted file mode 100644 index a5d3e671d..000000000 --- a/src/xdp/common/rewrite_helpers.h +++ /dev/null @@ -1,144 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-clause) */ -/* - * This file contains functions that are used in the packetXX XDP programs to - * manipulate on packets data. The functions are marked as __always_inline, and - * fully defined in this header file to be included in the BPF program. - */ - -#ifndef __REWRITE_HELPERS_H -#define __REWRITE_HELPERS_H - -#include <linux/bpf.h> -#include <linux/ip.h> -#include <linux/ipv6.h> -#include <linux/if_ether.h> - -#include <bpf/bpf_helpers.h> -#include <bpf/bpf_endian.h> - -/* Pops the outermost VLAN tag off the packet. Returns the popped VLAN ID on - * success or negative errno on failure. - */ -static __always_inline int vlan_tag_pop(struct xdp_md *ctx, struct ethhdr *eth) -{ - void *data_end = (void *)(long)ctx->data_end; - struct ethhdr eth_cpy; - struct vlan_hdr *vlh; - __be16 h_proto; - int vlid; - - if (!proto_is_vlan(eth->h_proto)) - return -1; - - /* Careful with the parenthesis here */ - vlh = (void *)(eth + 1); - - /* Still need to do bounds checking */ - if (vlh + 1 > data_end) - return -1; - - /* Save vlan ID for returning, h_proto for updating Ethernet header */ - vlid = bpf_ntohs(vlh->h_vlan_TCI); - h_proto = vlh->h_vlan_encapsulated_proto; - - /* Make a copy of the outer Ethernet header before we cut it off */ - __builtin_memcpy(ð_cpy, eth, sizeof(eth_cpy)); - - /* Actually adjust the head pointer */ - if (bpf_xdp_adjust_head(ctx, (int)sizeof(*vlh))) - return -1; - - /* Need to re-evaluate data *and* data_end and do new bounds checking - * after adjusting head - */ - eth = (void *)(long)ctx->data; - data_end = (void *)(long)ctx->data_end; - if (eth + 1 > data_end) - return -1; - - /* Copy back the old Ethernet header and update the proto type */ - __builtin_memcpy(eth, ð_cpy, sizeof(*eth)); - eth->h_proto = h_proto; - - return vlid; -} - -/* Pushes a new VLAN tag after the Ethernet header. Returns 0 on success, - * -1 on failure. - */ -static __always_inline int vlan_tag_push(struct xdp_md *ctx, - struct ethhdr *eth, int vlid) -{ - void *data_end = (void *)(long)ctx->data_end; - struct ethhdr eth_cpy; - struct vlan_hdr *vlh; - - /* First copy the original Ethernet header */ - __builtin_memcpy(ð_cpy, eth, sizeof(eth_cpy)); - - /* Then add space in front of the packet */ - if (bpf_xdp_adjust_head(ctx, 0 - (int)sizeof(*vlh))) - return -1; - - /* Need to re-evaluate data_end and data after head adjustment, and - * bounds check, even though we know there is enough space (as we - * increased it). - */ - data_end = (void *)(long)ctx->data_end; - eth = (void *)(long)ctx->data; - - if (eth + 1 > data_end) - return -1; - - /* Copy back Ethernet header in the right place, populate VLAN tag with - * ID and proto, and set outer Ethernet header to VLAN type. - */ - __builtin_memcpy(eth, ð_cpy, sizeof(*eth)); - - vlh = (void *)(eth + 1); - - if (vlh + 1 > data_end) - return -1; - - vlh->h_vlan_TCI = bpf_htons(vlid); - vlh->h_vlan_encapsulated_proto = eth->h_proto; - - eth->h_proto = bpf_htons(ETH_P_8021Q); - return 0; -} - -/* - * Swaps destination and source MAC addresses inside an Ethernet header - */ -static __always_inline void swap_src_dst_mac(struct ethhdr *eth) -{ - __u8 h_tmp[ETH_ALEN]; - - __builtin_memcpy(h_tmp, eth->h_source, ETH_ALEN); - __builtin_memcpy(eth->h_source, eth->h_dest, ETH_ALEN); - __builtin_memcpy(eth->h_dest, h_tmp, ETH_ALEN); -} - -/* - * Swaps destination and source IPv6 addresses inside an IPv6 header - */ -static __always_inline void swap_src_dst_ipv6(struct ipv6hdr *ipv6) -{ - struct in6_addr tmp = ipv6->saddr; - - ipv6->saddr = ipv6->daddr; - ipv6->daddr = tmp; -} - -/* - * Swaps destination and source IPv4 addresses inside an IPv4 header - */ -static __always_inline void swap_src_dst_ipv4(struct iphdr *iphdr) -{ - __be32 tmp = iphdr->saddr; - - iphdr->saddr = iphdr->daddr; - iphdr->daddr = tmp; -} - -#endif /* __REWRITE_HELPERS_H */ diff --git a/src/xdp/common/xdp_stats_kern.h b/src/xdp/common/xdp_stats_kern.h deleted file mode 100644 index c061a149d..000000000 --- a/src/xdp/common/xdp_stats_kern.h +++ /dev/null @@ -1,44 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - -/* Used *ONLY* by BPF-prog running kernel side. */ -#ifndef __XDP_STATS_KERN_H -#define __XDP_STATS_KERN_H - -/* Data record type 'struct datarec' is defined in common/xdp_stats_kern_user.h, - * programs using this header must first include that file. - */ -#ifndef __XDP_STATS_KERN_USER_H -#warning "You forgot to #include <../common/xdp_stats_kern_user.h>" -#include <../common/xdp_stats_kern_user.h> -#endif - -/* Keeps stats per (enum) xdp_action */ -struct { - __uint(type, BPF_MAP_TYPE_PERCPU_ARRAY); - __type(key, __u32); - __type(value, struct datarec); - __uint(max_entries, XDP_ACTION_MAX); -} xdp_stats_map SEC(".maps"); - -static __always_inline -__u32 xdp_stats_record_action(struct xdp_md *ctx, __u32 action) -{ - if (action >= XDP_ACTION_MAX) - return XDP_ABORTED; - - /* Lookup in kernel BPF-side return pointer to actual data record */ - struct datarec *rec = bpf_map_lookup_elem(&xdp_stats_map, &action); - if (!rec) - return XDP_ABORTED; - - /* BPF_MAP_TYPE_PERCPU_ARRAY returns a data record specific to current - * CPU and XDP hooks runs under Softirq, which makes it safe to update - * without atomic operations. - */ - rec->rx_packets++; - rec->rx_bytes += (ctx->data_end - ctx->data); - - return action; -} - -#endif /* __XDP_STATS_KERN_H */ diff --git a/src/xdp/common/xdp_stats_kern_user.h b/src/xdp/common/xdp_stats_kern_user.h deleted file mode 100644 index d7b8d05e6..000000000 --- a/src/xdp/common/xdp_stats_kern_user.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - -/* Used by BPF-prog kernel side BPF-progs and userspace programs, - * for sharing xdp_stats common struct and DEFINEs. - */ -#ifndef __XDP_STATS_KERN_USER_H -#define __XDP_STATS_KERN_USER_H - -/* This is the data record stored in the map */ -struct datarec { - __u64 rx_packets; - __u64 rx_bytes; -}; - -#ifndef XDP_ACTION_MAX -#define XDP_ACTION_MAX (XDP_REDIRECT + 1) -#endif - -#endif /* __XDP_STATS_KERN_USER_H */ diff --git a/src/xdp/include/bpf_endian.h b/src/xdp/include/bpf_endian.h deleted file mode 100644 index 2b0ede3d5..000000000 --- a/src/xdp/include/bpf_endian.h +++ /dev/null @@ -1,58 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Copied from $(LINUX)/tools/testing/selftests/bpf/bpf_endian.h */ -#ifndef __BPF_ENDIAN__ -#define __BPF_ENDIAN__ - -#include <linux/swab.h> - -/* LLVM's BPF target selects the endianness of the CPU - * it compiles on, or the user specifies (bpfel/bpfeb), - * respectively. The used __BYTE_ORDER__ is defined by - * the compiler, we cannot rely on __BYTE_ORDER from - * libc headers, since it doesn't reflect the actual - * requested byte order. - * - * Note, LLVM's BPF target has different __builtin_bswapX() - * semantics. It does map to BPF_ALU | BPF_END | BPF_TO_BE - * in bpfel and bpfeb case, which means below, that we map - * to cpu_to_be16(). We could use it unconditionally in BPF - * case, but better not rely on it, so that this header here - * can be used from application and BPF program side, which - * use different targets. - */ -#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ -# define __bpf_ntohs(x)__builtin_bswap16(x) -# define __bpf_htons(x)__builtin_bswap16(x) -# define __bpf_constant_ntohs(x)___constant_swab16(x) -# define __bpf_constant_htons(x)___constant_swab16(x) -# define __bpf_ntohl(x)__builtin_bswap32(x) -# define __bpf_htonl(x)__builtin_bswap32(x) -# define __bpf_constant_ntohl(x)___constant_swab32(x) -# define __bpf_constant_htonl(x)___constant_swab32(x) -#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ -# define __bpf_ntohs(x)(x) -# define __bpf_htons(x)(x) -# define __bpf_constant_ntohs(x)(x) -# define __bpf_constant_htons(x)(x) -# define __bpf_ntohl(x)(x) -# define __bpf_htonl(x)(x) -# define __bpf_constant_ntohl(x)(x) -# define __bpf_constant_htonl(x)(x) -#else -# error "Fix your compiler's __BYTE_ORDER__?!" -#endif - -#define bpf_htons(x)\ - (__builtin_constant_p(x) ?\ - __bpf_constant_htons(x) : __bpf_htons(x)) -#define bpf_ntohs(x)\ - (__builtin_constant_p(x) ?\ - __bpf_constant_ntohs(x) : __bpf_ntohs(x)) -#define bpf_htonl(x)\ - (__builtin_constant_p(x) ?\ - __bpf_constant_htonl(x) : __bpf_htonl(x)) -#define bpf_ntohl(x)\ - (__builtin_constant_p(x) ?\ - __bpf_constant_ntohl(x) : __bpf_ntohl(x)) - -#endif /* __BPF_ENDIAN__ */ diff --git a/src/xdp/include/bpf_legacy.h b/src/xdp/include/bpf_legacy.h deleted file mode 100644 index 8dfa168cd..000000000 --- a/src/xdp/include/bpf_legacy.h +++ /dev/null @@ -1,38 +0,0 @@ -/* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */ -#ifndef __BPF_LEGACY__ -#define __BPF_LEGACY__ - -/* - * legacy bpf_map_def with extra fields supported only by bpf_load(), do not - * use outside of samples/bpf - */ -struct bpf_map_def_legacy { - unsigned int type; - unsigned int key_size; - unsigned int value_size; - unsigned int max_entries; - unsigned int map_flags; - unsigned int inner_map_idx; - unsigned int numa_node; -}; - -#define BPF_ANNOTATE_KV_PAIR(name, type_key, type_val) \ - struct ____btf_map_##name { \ - type_key key; \ - type_val value; \ - }; \ - struct ____btf_map_##name \ - __attribute__ ((section(".maps." #name), used)) \ - ____btf_map_##name = { } - -/* llvm builtin functions that eBPF C program may use to - * emit BPF_LD_ABS and BPF_LD_IND instructions - */ -unsigned long long load_byte(void *skb, - unsigned long long off) asm("llvm.bpf.load.byte"); -unsigned long long load_half(void *skb, - unsigned long long off) asm("llvm.bpf.load.half"); -unsigned long long load_word(void *skb, - unsigned long long off) asm("llvm.bpf.load.word"); - -#endif diff --git a/src/xdp/include/bpf_util.h b/src/xdp/include/bpf_util.h deleted file mode 100644 index e74b33e9d..000000000 --- a/src/xdp/include/bpf_util.h +++ /dev/null @@ -1,61 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Copied from $(LINUX)/tools/testing/selftests/bpf/bpf_util.h */ -#ifndef __BPF_UTIL__ -#define __BPF_UTIL__ - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <errno.h> - -static inline unsigned int bpf_num_possible_cpus(void) -{ - static const char *fcpu = "/sys/devices/system/cpu/possible"; - unsigned int start, end, possible_cpus = 0; - char buff[128]; - FILE *fp; - int n; - - fp = fopen(fcpu, "r"); - if (!fp) { - printf("Failed to open %s: '%s'!\n", fcpu, strerror(errno)); - exit(1); - } - - while (fgets(buff, sizeof(buff), fp)) { - n = sscanf(buff, "%u-%u", &start, &end); - if (n == 0) { - printf("Failed to retrieve # possible CPUs!\n"); - exit(1); - } else if (n == 1) { - end = start; - } - possible_cpus = start == 0 ? end + 1 : 0; - break; - } - fclose(fp); - - return possible_cpus; -} - -#define __bpf_percpu_val_align __attribute__((__aligned__(8))) - -#define BPF_DECLARE_PERCPU(type, name) \ - struct { type v; /* padding */ } __bpf_percpu_val_align \ - name[bpf_num_possible_cpus()] -#define bpf_percpu(name, cpu) name[(cpu)].v - -#ifndef ARRAY_SIZE -# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -#endif - -#ifndef sizeof_field -#define sizeof_field(TYPE, MEMBER) sizeof((((TYPE *)0)->MEMBER)) -#endif - -#ifndef offsetofend -#define offsetofend(TYPE, MEMBER) \ - (offsetof(TYPE, MEMBER) + sizeof_field(TYPE, MEMBER)) -#endif - -#endif /* __BPF_UTIL__ */ diff --git a/src/xdp/include/jhash.h b/src/xdp/include/jhash.h deleted file mode 100644 index b81a0d0eb..000000000 --- a/src/xdp/include/jhash.h +++ /dev/null @@ -1,172 +0,0 @@ -#ifndef _LINUX_JHASH_H -#define _LINUX_JHASH_H - -/* Copied from $(LINUX)/include/linux/jhash.h (kernel 4.18) */ - -/* jhash.h: Jenkins hash support. - * - * Copyright (C) 2006. Bob Jenkins (bob_jenkins@burtleburtle.net) - * - * http://burtleburtle.net/bob/hash/ - * - * These are the credits from Bob's sources: - * - * lookup3.c, by Bob Jenkins, May 2006, Public Domain. - * - * These are functions for producing 32-bit hashes for hash table lookup. - * hashword(), hashlittle(), hashlittle2(), hashbig(), mix(), and final() - * are externally useful functions. Routines to test the hash are included - * if SELF_TEST is defined. You can use this free for any purpose. It's in - * the public domain. It has no warranty. - * - * Copyright (C) 2009-2010 Jozsef Kadlecsik (kadlec@blackhole.kfki.hu) - */ - -static inline __u32 rol32(__u32 word, unsigned int shift) -{ - return (word << shift) | (word >> ((-shift) & 31)); -} - -/* copy paste of jhash from kernel sources (include/linux/jhash.h) to make sure - * LLVM can compile it into valid sequence of BPF instructions - */ -#define __jhash_mix(a, b, c) \ -{ \ - a -= c; a ^= rol32(c, 4); c += b; \ - b -= a; b ^= rol32(a, 6); a += c; \ - c -= b; c ^= rol32(b, 8); b += a; \ - a -= c; a ^= rol32(c, 16); c += b; \ - b -= a; b ^= rol32(a, 19); a += c; \ - c -= b; c ^= rol32(b, 4); b += a; \ -} - -#define __jhash_final(a, b, c) \ -{ \ - c ^= b; c -= rol32(b, 14); \ - a ^= c; a -= rol32(c, 11); \ - b ^= a; b -= rol32(a, 25); \ - c ^= b; c -= rol32(b, 16); \ - a ^= c; a -= rol32(c, 4); \ - b ^= a; b -= rol32(a, 14); \ - c ^= b; c -= rol32(b, 24); \ -} - -#define JHASH_INITVAL 0xdeadbeef - -typedef unsigned int u32; - -/* jhash - hash an arbitrary key - * @k: sequence of bytes as key - * @length: the length of the key - * @initval: the previous hash, or an arbitray value - * - * The generic version, hashes an arbitrary sequence of bytes. - * No alignment or length assumptions are made about the input key. - * - * Returns the hash value of the key. The result depends on endianness. - */ -static inline u32 jhash(const void *key, u32 length, u32 initval) -{ - u32 a, b, c; - const unsigned char *k = key; - - /* Set up the internal state */ - a = b = c = JHASH_INITVAL + length + initval; - - /* All but the last block: affect some 32 bits of (a,b,c) */ - while (length > 12) { - a += *(u32 *)(k); - b += *(u32 *)(k + 4); - c += *(u32 *)(k + 8); - __jhash_mix(a, b, c); - length -= 12; - k += 12; - } - /* Last block: affect all 32 bits of (c) */ - switch (length) { - case 12: c += (u32)k[11]<<24; /* fall through */ - case 11: c += (u32)k[10]<<16; /* fall through */ - case 10: c += (u32)k[9]<<8; /* fall through */ - case 9: c += k[8]; /* fall through */ - case 8: b += (u32)k[7]<<24; /* fall through */ - case 7: b += (u32)k[6]<<16; /* fall through */ - case 6: b += (u32)k[5]<<8; /* fall through */ - case 5: b += k[4]; /* fall through */ - case 4: a += (u32)k[3]<<24; /* fall through */ - case 3: a += (u32)k[2]<<16; /* fall through */ - case 2: a += (u32)k[1]<<8; /* fall through */ - case 1: a += k[0]; - __jhash_final(a, b, c); - case 0: /* Nothing left to add */ - break; - } - - return c; -} - -/* jhash2 - hash an array of u32's - * @k: the key which must be an array of u32's - * @length: the number of u32's in the key - * @initval: the previous hash, or an arbitray value - * - * Returns the hash value of the key. - */ -static inline u32 jhash2(const u32 *k, u32 length, u32 initval) -{ - u32 a, b, c; - - /* Set up the internal state */ - a = b = c = JHASH_INITVAL + (length<<2) + initval; - - /* Handle most of the key */ - while (length > 3) { - a += k[0]; - b += k[1]; - c += k[2]; - __jhash_mix(a, b, c); - length -= 3; - k += 3; - } - - /* Handle the last 3 u32's */ - switch (length) { - case 3: c += k[2]; /* fall through */ - case 2: b += k[1]; /* fall through */ - case 1: a += k[0]; - __jhash_final(a, b, c); - case 0: /* Nothing left to add */ - break; - } - - return c; -} - - -/* __jhash_nwords - hash exactly 3, 2 or 1 word(s) */ -static inline u32 __jhash_nwords(u32 a, u32 b, u32 c, u32 initval) -{ - a += initval; - b += initval; - c += initval; - - __jhash_final(a, b, c); - - return c; -} - -static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval) -{ - return __jhash_nwords(a, b, c, initval + JHASH_INITVAL + (3 << 2)); -} - -static inline u32 jhash_2words(u32 a, u32 b, u32 initval) -{ - return __jhash_nwords(a, b, 0, initval + JHASH_INITVAL + (2 << 2)); -} - -static inline u32 jhash_1word(u32 a, u32 initval) -{ - return __jhash_nwords(a, 0, 0, initval + JHASH_INITVAL + (1 << 2)); -} - -#endif /* _LINUX_JHASH_H */ diff --git a/src/xdp/include/linux/bpf.h b/src/xdp/include/linux/bpf.h deleted file mode 100644 index 161a93809..000000000 --- a/src/xdp/include/linux/bpf.h +++ /dev/null @@ -1,3278 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of version 2 of the GNU General Public - * License as published by the Free Software Foundation. - */ -#ifndef _UAPI__LINUX_BPF_H__ -#define _UAPI__LINUX_BPF_H__ - -#include <linux/types.h> -#include <linux/bpf_common.h> - -/* Extended instruction set based on top of classic BPF */ - -/* instruction classes */ -#define BPF_JMP32 0x06 /* jmp mode in word width */ -#define BPF_ALU64 0x07 /* alu mode in double word width */ - -/* ld/ldx fields */ -#define BPF_DW 0x18 /* double word (64-bit) */ -#define BPF_XADD 0xc0 /* exclusive add */ - -/* alu/jmp fields */ -#define BPF_MOV 0xb0 /* mov reg to reg */ -#define BPF_ARSH 0xc0 /* sign extending arithmetic shift right */ - -/* change endianness of a register */ -#define BPF_END 0xd0 /* flags for endianness conversion: */ -#define BPF_TO_LE 0x00 /* convert to little-endian */ -#define BPF_TO_BE 0x08 /* convert to big-endian */ -#define BPF_FROM_LE BPF_TO_LE -#define BPF_FROM_BE BPF_TO_BE - -/* jmp encodings */ -#define BPF_JNE 0x50 /* jump != */ -#define BPF_JLT 0xa0 /* LT is unsigned, '<' */ -#define BPF_JLE 0xb0 /* LE is unsigned, '<=' */ -#define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */ -#define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */ -#define BPF_JSLT 0xc0 /* SLT is signed, '<' */ -#define BPF_JSLE 0xd0 /* SLE is signed, '<=' */ -#define BPF_CALL 0x80 /* function call */ -#define BPF_EXIT 0x90 /* function return */ - -/* Register numbers */ -enum { - BPF_REG_0 = 0, - BPF_REG_1, - BPF_REG_2, - BPF_REG_3, - BPF_REG_4, - BPF_REG_5, - BPF_REG_6, - BPF_REG_7, - BPF_REG_8, - BPF_REG_9, - BPF_REG_10, - __MAX_BPF_REG, -}; - -/* BPF has 10 general purpose 64-bit registers and stack frame. */ -#define MAX_BPF_REG __MAX_BPF_REG - -struct bpf_insn { - __u8 code; /* opcode */ - __u8 dst_reg:4; /* dest register */ - __u8 src_reg:4; /* source register */ - __s16 off; /* signed offset */ - __s32 imm; /* signed immediate constant */ -}; - -/* Key of an a BPF_MAP_TYPE_LPM_TRIE entry */ -struct bpf_lpm_trie_key { - __u32 prefixlen; /* up to 32 for AF_INET, 128 for AF_INET6 */ - __u8 data[0]; /* Arbitrary size */ -}; - -struct bpf_cgroup_storage_key { - __u64 cgroup_inode_id; /* cgroup inode id */ - __u32 attach_type; /* program attach type */ -}; - -/* BPF syscall commands, see bpf(2) man-page for details. */ -enum bpf_cmd { - BPF_MAP_CREATE, - BPF_MAP_LOOKUP_ELEM, - BPF_MAP_UPDATE_ELEM, - BPF_MAP_DELETE_ELEM, - BPF_MAP_GET_NEXT_KEY, - BPF_PROG_LOAD, - BPF_OBJ_PIN, - BPF_OBJ_GET, - BPF_PROG_ATTACH, - BPF_PROG_DETACH, - BPF_PROG_TEST_RUN, - BPF_PROG_GET_NEXT_ID, - BPF_MAP_GET_NEXT_ID, - BPF_PROG_GET_FD_BY_ID, - BPF_MAP_GET_FD_BY_ID, - BPF_OBJ_GET_INFO_BY_FD, - BPF_PROG_QUERY, - BPF_RAW_TRACEPOINT_OPEN, - BPF_BTF_LOAD, - BPF_BTF_GET_FD_BY_ID, - BPF_TASK_FD_QUERY, - BPF_MAP_LOOKUP_AND_DELETE_ELEM, -}; - -enum bpf_map_type { - BPF_MAP_TYPE_UNSPEC, - BPF_MAP_TYPE_HASH, - BPF_MAP_TYPE_ARRAY, - BPF_MAP_TYPE_PROG_ARRAY, - BPF_MAP_TYPE_PERF_EVENT_ARRAY, - BPF_MAP_TYPE_PERCPU_HASH, - BPF_MAP_TYPE_PERCPU_ARRAY, - BPF_MAP_TYPE_STACK_TRACE, - BPF_MAP_TYPE_CGROUP_ARRAY, - BPF_MAP_TYPE_LRU_HASH, - BPF_MAP_TYPE_LRU_PERCPU_HASH, - BPF_MAP_TYPE_LPM_TRIE, - BPF_MAP_TYPE_ARRAY_OF_MAPS, - BPF_MAP_TYPE_HASH_OF_MAPS, - BPF_MAP_TYPE_DEVMAP, - BPF_MAP_TYPE_SOCKMAP, - BPF_MAP_TYPE_CPUMAP, - BPF_MAP_TYPE_XSKMAP, - BPF_MAP_TYPE_SOCKHASH, - BPF_MAP_TYPE_CGROUP_STORAGE, - BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, - BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE, - BPF_MAP_TYPE_QUEUE, - BPF_MAP_TYPE_STACK, -}; - -/* Note that tracing related programs such as - * BPF_PROG_TYPE_{KPROBE,TRACEPOINT,PERF_EVENT,RAW_TRACEPOINT} - * are not subject to a stable API since kernel internal data - * structures can change from release to release and may - * therefore break existing tracing BPF programs. Tracing BPF - * programs correspond to /a/ specific kernel which is to be - * analyzed, and not /a/ specific kernel /and/ all future ones. - */ -enum bpf_prog_type { - BPF_PROG_TYPE_UNSPEC, - BPF_PROG_TYPE_SOCKET_FILTER, - BPF_PROG_TYPE_KPROBE, - BPF_PROG_TYPE_SCHED_CLS, - BPF_PROG_TYPE_SCHED_ACT, - BPF_PROG_TYPE_TRACEPOINT, - BPF_PROG_TYPE_XDP, - BPF_PROG_TYPE_PERF_EVENT, - BPF_PROG_TYPE_CGROUP_SKB, - BPF_PROG_TYPE_CGROUP_SOCK, - BPF_PROG_TYPE_LWT_IN, - BPF_PROG_TYPE_LWT_OUT, - BPF_PROG_TYPE_LWT_XMIT, - BPF_PROG_TYPE_SOCK_OPS, - BPF_PROG_TYPE_SK_SKB, - BPF_PROG_TYPE_CGROUP_DEVICE, - BPF_PROG_TYPE_SK_MSG, - BPF_PROG_TYPE_RAW_TRACEPOINT, - BPF_PROG_TYPE_CGROUP_SOCK_ADDR, - BPF_PROG_TYPE_LWT_SEG6LOCAL, - BPF_PROG_TYPE_LIRC_MODE2, - BPF_PROG_TYPE_SK_REUSEPORT, - BPF_PROG_TYPE_FLOW_DISSECTOR, -}; - -enum bpf_attach_type { - BPF_CGROUP_INET_INGRESS, - BPF_CGROUP_INET_EGRESS, - BPF_CGROUP_INET_SOCK_CREATE, - BPF_CGROUP_SOCK_OPS, - BPF_SK_SKB_STREAM_PARSER, - BPF_SK_SKB_STREAM_VERDICT, - BPF_CGROUP_DEVICE, - BPF_SK_MSG_VERDICT, - BPF_CGROUP_INET4_BIND, - BPF_CGROUP_INET6_BIND, - BPF_CGROUP_INET4_CONNECT, - BPF_CGROUP_INET6_CONNECT, - BPF_CGROUP_INET4_POST_BIND, - BPF_CGROUP_INET6_POST_BIND, - BPF_CGROUP_UDP4_SENDMSG, - BPF_CGROUP_UDP6_SENDMSG, - BPF_LIRC_MODE2, - BPF_FLOW_DISSECTOR, - __MAX_BPF_ATTACH_TYPE -}; - -#define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE - -/* cgroup-bpf attach flags used in BPF_PROG_ATTACH command - * - * NONE(default): No further bpf programs allowed in the subtree. - * - * BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, - * the program in this cgroup yields to sub-cgroup program. - * - * BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, - * that cgroup program gets run in addition to the program in this cgroup. - * - * Only one program is allowed to be attached to a cgroup with - * NONE or BPF_F_ALLOW_OVERRIDE flag. - * Attaching another program on top of NONE or BPF_F_ALLOW_OVERRIDE will - * release old program and attach the new one. Attach flags has to match. - * - * Multiple programs are allowed to be attached to a cgroup with - * BPF_F_ALLOW_MULTI flag. They are executed in FIFO order - * (those that were attached first, run first) - * The programs of sub-cgroup are executed first, then programs of - * this cgroup and then programs of parent cgroup. - * When children program makes decision (like picking TCP CA or sock bind) - * parent program has a chance to override it. - * - * A cgroup with MULTI or OVERRIDE flag allows any attach flags in sub-cgroups. - * A cgroup with NONE doesn't allow any programs in sub-cgroups. - * Ex1: - * cgrp1 (MULTI progs A, B) -> - * cgrp2 (OVERRIDE prog C) -> - * cgrp3 (MULTI prog D) -> - * cgrp4 (OVERRIDE prog E) -> - * cgrp5 (NONE prog F) - * the event in cgrp5 triggers execution of F,D,A,B in that order. - * if prog F is detached, the execution is E,D,A,B - * if prog F and D are detached, the execution is E,A,B - * if prog F, E and D are detached, the execution is C,A,B - * - * All eligible programs are executed regardless of return code from - * earlier programs. - */ -#define BPF_F_ALLOW_OVERRIDE (1U << 0) -#define BPF_F_ALLOW_MULTI (1U << 1) - -/* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the - * verifier will perform strict alignment checking as if the kernel - * has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set, - * and NET_IP_ALIGN defined to 2. - */ -#define BPF_F_STRICT_ALIGNMENT (1U << 0) - -/* If BPF_F_ANY_ALIGNMENT is used in BPF_PROF_LOAD command, the - * verifier will allow any alignment whatsoever. On platforms - * with strict alignment requirements for loads ands stores (such - * as sparc and mips) the verifier validates that all loads and - * stores provably follow this requirement. This flag turns that - * checking and enforcement off. - * - * It is mostly used for testing when we want to validate the - * context and memory access aspects of the verifier, but because - * of an unaligned access the alignment check would trigger before - * the one we are interested in. - */ -#define BPF_F_ANY_ALIGNMENT (1U << 1) - -/* when bpf_ldimm64->src_reg == BPF_PSEUDO_MAP_FD, bpf_ldimm64->imm == fd */ -#define BPF_PSEUDO_MAP_FD 1 - -/* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative - * offset to another bpf function - */ -#define BPF_PSEUDO_CALL 1 - -/* flags for BPF_MAP_UPDATE_ELEM command */ -#define BPF_ANY 0 /* create new element or update existing */ -#define BPF_NOEXIST 1 /* create new element if it didn't exist */ -#define BPF_EXIST 2 /* update existing element */ -#define BPF_F_LOCK 4 /* spin_lock-ed map_lookup/map_update */ - -/* flags for BPF_MAP_CREATE command */ -#define BPF_F_NO_PREALLOC (1U << 0) -/* Instead of having one common LRU list in the - * BPF_MAP_TYPE_LRU_[PERCPU_]HASH map, use a percpu LRU list - * which can scale and perform better. - * Note, the LRU nodes (including free nodes) cannot be moved - * across different LRU lists. - */ -#define BPF_F_NO_COMMON_LRU (1U << 1) -/* Specify numa node during map creation */ -#define BPF_F_NUMA_NODE (1U << 2) - -#define BPF_OBJ_NAME_LEN 16U - -/* Flags for accessing BPF object */ -#define BPF_F_RDONLY (1U << 3) -#define BPF_F_WRONLY (1U << 4) - -/* Flag for stack_map, store build_id+offset instead of pointer */ -#define BPF_F_STACK_BUILD_ID (1U << 5) - -/* Zero-initialize hash function seed. This should only be used for testing. */ -#define BPF_F_ZERO_SEED (1U << 6) - -/* flags for BPF_PROG_QUERY */ -#define BPF_F_QUERY_EFFECTIVE (1U << 0) - -enum bpf_stack_build_id_status { - /* user space need an empty entry to identify end of a trace */ - BPF_STACK_BUILD_ID_EMPTY = 0, - /* with valid build_id and offset */ - BPF_STACK_BUILD_ID_VALID = 1, - /* couldn't get build_id, fallback to ip */ - BPF_STACK_BUILD_ID_IP = 2, -}; - -#define BPF_BUILD_ID_SIZE 20 -struct bpf_stack_build_id { - __s32 status; - unsigned char build_id[BPF_BUILD_ID_SIZE]; - union { - __u64 offset; - __u64 ip; - }; -}; - -union bpf_attr { - struct { /* anonymous struct used by BPF_MAP_CREATE command */ - __u32 map_type; /* one of enum bpf_map_type */ - __u32 key_size; /* size of key in bytes */ - __u32 value_size; /* size of value in bytes */ - __u32 max_entries; /* max number of entries in a map */ - __u32 map_flags; /* BPF_MAP_CREATE related - * flags defined above. - */ - __u32 inner_map_fd; /* fd pointing to the inner map */ - __u32 numa_node; /* numa node (effective only if - * BPF_F_NUMA_NODE is set). - */ - char map_name[BPF_OBJ_NAME_LEN]; - __u32 map_ifindex; /* ifindex of netdev to create on */ - __u32 btf_fd; /* fd pointing to a BTF type data */ - __u32 btf_key_type_id; /* BTF type_id of the key */ - __u32 btf_value_type_id; /* BTF type_id of the value */ - }; - - struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */ - __u32 map_fd; - __aligned_u64 key; - union { - __aligned_u64 value; - __aligned_u64 next_key; - }; - __u64 flags; - }; - - struct { /* anonymous struct used by BPF_PROG_LOAD command */ - __u32 prog_type; /* one of enum bpf_prog_type */ - __u32 insn_cnt; - __aligned_u64 insns; - __aligned_u64 license; - __u32 log_level; /* verbosity level of verifier */ - __u32 log_size; /* size of user buffer */ - __aligned_u64 log_buf; /* user supplied buffer */ - __u32 kern_version; /* not used */ - __u32 prog_flags; - char prog_name[BPF_OBJ_NAME_LEN]; - __u32 prog_ifindex; /* ifindex of netdev to prep for */ - /* For some prog types expected attach type must be known at - * load time to verify attach type specific parts of prog - * (context accesses, allowed helpers, etc). - */ - __u32 expected_attach_type; - __u32 prog_btf_fd; /* fd pointing to BTF type data */ - __u32 func_info_rec_size; /* userspace bpf_func_info size */ - __aligned_u64 func_info; /* func info */ - __u32 func_info_cnt; /* number of bpf_func_info records */ - __u32 line_info_rec_size; /* userspace bpf_line_info size */ - __aligned_u64 line_info; /* line info */ - __u32 line_info_cnt; /* number of bpf_line_info records */ - }; - - struct { /* anonymous struct used by BPF_OBJ_* commands */ - __aligned_u64 pathname; - __u32 bpf_fd; - __u32 file_flags; - }; - - struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */ - __u32 target_fd; /* container object to attach to */ - __u32 attach_bpf_fd; /* eBPF program to attach */ - __u32 attach_type; - __u32 attach_flags; - }; - - struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */ - __u32 prog_fd; - __u32 retval; - __u32 data_size_in; /* input: len of data_in */ - __u32 data_size_out; /* input/output: len of data_out - * returns ENOSPC if data_out - * is too small. - */ - __aligned_u64 data_in; - __aligned_u64 data_out; - __u32 repeat; - __u32 duration; - } test; - - struct { /* anonymous struct used by BPF_*_GET_*_ID */ - union { - __u32 start_id; - __u32 prog_id; - __u32 map_id; - __u32 btf_id; - }; - __u32 next_id; - __u32 open_flags; - }; - - struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */ - __u32 bpf_fd; - __u32 info_len; - __aligned_u64 info; - } info; - - struct { /* anonymous struct used by BPF_PROG_QUERY command */ - __u32 target_fd; /* container object to query */ - __u32 attach_type; - __u32 query_flags; - __u32 attach_flags; - __aligned_u64 prog_ids; - __u32 prog_cnt; - } query; - - struct { - __u64 name; - __u32 prog_fd; - } raw_tracepoint; - - struct { /* anonymous struct for BPF_BTF_LOAD */ - __aligned_u64 btf; - __aligned_u64 btf_log_buf; - __u32 btf_size; - __u32 btf_log_size; - __u32 btf_log_level; - }; - - struct { - __u32 pid; /* input: pid */ - __u32 fd; /* input: fd */ - __u32 flags; /* input: flags */ - __u32 buf_len; /* input/output: buf len */ - __aligned_u64 buf; /* input/output: - * tp_name for tracepoint - * symbol for kprobe - * filename for uprobe - */ - __u32 prog_id; /* output: prod_id */ - __u32 fd_type; /* output: BPF_FD_TYPE_* */ - __u64 probe_offset; /* output: probe_offset */ - __u64 probe_addr; /* output: probe_addr */ - } task_fd_query; -} __attribute__((aligned(8))); - -/* The description below is an attempt at providing documentation to eBPF - * developers about the multiple available eBPF helper functions. It can be - * parsed and used to produce a manual page. The workflow is the following, - * and requires the rst2man utility: - * - * $ ./scripts/bpf_helpers_doc.py \ - * --filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst - * $ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7 - * $ man /tmp/bpf-helpers.7 - * - * Note that in order to produce this external documentation, some RST - * formatting is used in the descriptions to get "bold" and "italics" in - * manual pages. Also note that the few trailing white spaces are - * intentional, removing them would break paragraphs for rst2man. - * - * Start of BPF helper function descriptions: - * - * void *bpf_map_lookup_elem(struct bpf_map *map, const void *key) - * Description - * Perform a lookup in *map* for an entry associated to *key*. - * Return - * Map value associated to *key*, or **NULL** if no entry was - * found. - * - * int bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags) - * Description - * Add or update the value of the entry associated to *key* in - * *map* with *value*. *flags* is one of: - * - * **BPF_NOEXIST** - * The entry for *key* must not exist in the map. - * **BPF_EXIST** - * The entry for *key* must already exist in the map. - * **BPF_ANY** - * No condition on the existence of the entry for *key*. - * - * Flag value **BPF_NOEXIST** cannot be used for maps of types - * **BPF_MAP_TYPE_ARRAY** or **BPF_MAP_TYPE_PERCPU_ARRAY** (all - * elements always exist), the helper would return an error. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_map_delete_elem(struct bpf_map *map, const void *key) - * Description - * Delete entry with *key* from *map*. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_probe_read(void *dst, u32 size, const void *src) - * Description - * For tracing programs, safely attempt to read *size* bytes from - * address *src* and store the data in *dst*. - * Return - * 0 on success, or a negative error in case of failure. - * - * u64 bpf_ktime_get_ns(void) - * Description - * Return the time elapsed since system boot, in nanoseconds. - * Return - * Current *ktime*. - * - * int bpf_trace_printk(const char *fmt, u32 fmt_size, ...) - * Description - * This helper is a "printk()-like" facility for debugging. It - * prints a message defined by format *fmt* (of size *fmt_size*) - * to file *\/sys/kernel/debug/tracing/trace* from DebugFS, if - * available. It can take up to three additional **u64** - * arguments (as an eBPF helpers, the total number of arguments is - * limited to five). - * - * Each time the helper is called, it appends a line to the trace. - * The format of the trace is customizable, and the exact output - * one will get depends on the options set in - * *\/sys/kernel/debug/tracing/trace_options* (see also the - * *README* file under the same directory). However, it usually - * defaults to something like: - * - * :: - * - * telnet-470 [001] .N.. 419421.045894: 0x00000001: <formatted msg> - * - * In the above: - * - * * ``telnet`` is the name of the current task. - * * ``470`` is the PID of the current task. - * * ``001`` is the CPU number on which the task is - * running. - * * In ``.N..``, each character refers to a set of - * options (whether irqs are enabled, scheduling - * options, whether hard/softirqs are running, level of - * preempt_disabled respectively). **N** means that - * **TIF_NEED_RESCHED** and **PREEMPT_NEED_RESCHED** - * are set. - * * ``419421.045894`` is a timestamp. - * * ``0x00000001`` is a fake value used by BPF for the - * instruction pointer register. - * * ``<formatted msg>`` is the message formatted with - * *fmt*. - * - * The conversion specifiers supported by *fmt* are similar, but - * more limited than for printk(). They are **%d**, **%i**, - * **%u**, **%x**, **%ld**, **%li**, **%lu**, **%lx**, **%lld**, - * **%lli**, **%llu**, **%llx**, **%p**, **%s**. No modifier (size - * of field, padding with zeroes, etc.) is available, and the - * helper will return **-EINVAL** (but print nothing) if it - * encounters an unknown specifier. - * - * Also, note that **bpf_trace_printk**\ () is slow, and should - * only be used for debugging purposes. For this reason, a notice - * bloc (spanning several lines) is printed to kernel logs and - * states that the helper should not be used "for production use" - * the first time this helper is used (or more precisely, when - * **trace_printk**\ () buffers are allocated). For passing values - * to user space, perf events should be preferred. - * Return - * The number of bytes written to the buffer, or a negative error - * in case of failure. - * - * u32 bpf_get_prandom_u32(void) - * Description - * Get a pseudo-random number. - * - * From a security point of view, this helper uses its own - * pseudo-random internal state, and cannot be used to infer the - * seed of other random functions in the kernel. However, it is - * essential to note that the generator used by the helper is not - * cryptographically secure. - * Return - * A random 32-bit unsigned value. - * - * u32 bpf_get_smp_processor_id(void) - * Description - * Get the SMP (symmetric multiprocessing) processor id. Note that - * all programs run with preemption disabled, which means that the - * SMP processor id is stable during all the execution of the - * program. - * Return - * The SMP id of the processor running the program. - * - * int bpf_skb_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len, u64 flags) - * Description - * Store *len* bytes from address *from* into the packet - * associated to *skb*, at *offset*. *flags* are a combination of - * **BPF_F_RECOMPUTE_CSUM** (automatically recompute the - * checksum for the packet after storing the bytes) and - * **BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\ - * **->swhash** and *skb*\ **->l4hash** to 0). - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_l3_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 size) - * Description - * Recompute the layer 3 (e.g. IP) checksum for the packet - * associated to *skb*. Computation is incremental, so the helper - * must know the former value of the header field that was - * modified (*from*), the new value of this field (*to*), and the - * number of bytes (2 or 4) for this field, stored in *size*. - * Alternatively, it is possible to store the difference between - * the previous and the new values of the header field in *to*, by - * setting *from* and *size* to 0. For both methods, *offset* - * indicates the location of the IP checksum within the packet. - * - * This helper works in combination with **bpf_csum_diff**\ (), - * which does not update the checksum in-place, but offers more - * flexibility and can handle sizes larger than 2 or 4 for the - * checksum to update. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_l4_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 flags) - * Description - * Recompute the layer 4 (e.g. TCP, UDP or ICMP) checksum for the - * packet associated to *skb*. Computation is incremental, so the - * helper must know the former value of the header field that was - * modified (*from*), the new value of this field (*to*), and the - * number of bytes (2 or 4) for this field, stored on the lowest - * four bits of *flags*. Alternatively, it is possible to store - * the difference between the previous and the new values of the - * header field in *to*, by setting *from* and the four lowest - * bits of *flags* to 0. For both methods, *offset* indicates the - * location of the IP checksum within the packet. In addition to - * the size of the field, *flags* can be added (bitwise OR) actual - * flags. With **BPF_F_MARK_MANGLED_0**, a null checksum is left - * untouched (unless **BPF_F_MARK_ENFORCE** is added as well), and - * for updates resulting in a null checksum the value is set to - * **CSUM_MANGLED_0** instead. Flag **BPF_F_PSEUDO_HDR** indicates - * the checksum is to be computed against a pseudo-header. - * - * This helper works in combination with **bpf_csum_diff**\ (), - * which does not update the checksum in-place, but offers more - * flexibility and can handle sizes larger than 2 or 4 for the - * checksum to update. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_tail_call(void *ctx, struct bpf_map *prog_array_map, u32 index) - * Description - * This special helper is used to trigger a "tail call", or in - * other words, to jump into another eBPF program. The same stack - * frame is used (but values on stack and in registers for the - * caller are not accessible to the callee). This mechanism allows - * for program chaining, either for raising the maximum number of - * available eBPF instructions, or to execute given programs in - * conditional blocks. For security reasons, there is an upper - * limit to the number of successive tail calls that can be - * performed. - * - * Upon call of this helper, the program attempts to jump into a - * program referenced at index *index* in *prog_array_map*, a - * special map of type **BPF_MAP_TYPE_PROG_ARRAY**, and passes - * *ctx*, a pointer to the context. - * - * If the call succeeds, the kernel immediately runs the first - * instruction of the new program. This is not a function call, - * and it never returns to the previous program. If the call - * fails, then the helper has no effect, and the caller continues - * to run its subsequent instructions. A call can fail if the - * destination program for the jump does not exist (i.e. *index* - * is superior to the number of entries in *prog_array_map*), or - * if the maximum number of tail calls has been reached for this - * chain of programs. This limit is defined in the kernel by the - * macro **MAX_TAIL_CALL_CNT** (not accessible to user space), - * which is currently set to 32. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_clone_redirect(struct sk_buff *skb, u32 ifindex, u64 flags) - * Description - * Clone and redirect the packet associated to *skb* to another - * net device of index *ifindex*. Both ingress and egress - * interfaces can be used for redirection. The **BPF_F_INGRESS** - * value in *flags* is used to make the distinction (ingress path - * is selected if the flag is present, egress path otherwise). - * This is the only flag supported for now. - * - * In comparison with **bpf_redirect**\ () helper, - * **bpf_clone_redirect**\ () has the associated cost of - * duplicating the packet buffer, but this can be executed out of - * the eBPF program. Conversely, **bpf_redirect**\ () is more - * efficient, but it is handled through an action code where the - * redirection happens only after the eBPF program has returned. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * u64 bpf_get_current_pid_tgid(void) - * Return - * A 64-bit integer containing the current tgid and pid, and - * created as such: - * *current_task*\ **->tgid << 32 \|** - * *current_task*\ **->pid**. - * - * u64 bpf_get_current_uid_gid(void) - * Return - * A 64-bit integer containing the current GID and UID, and - * created as such: *current_gid* **<< 32 \|** *current_uid*. - * - * int bpf_get_current_comm(char *buf, u32 size_of_buf) - * Description - * Copy the **comm** attribute of the current task into *buf* of - * *size_of_buf*. The **comm** attribute contains the name of - * the executable (excluding the path) for the current task. The - * *size_of_buf* must be strictly positive. On success, the - * helper makes sure that the *buf* is NUL-terminated. On failure, - * it is filled with zeroes. - * Return - * 0 on success, or a negative error in case of failure. - * - * u32 bpf_get_cgroup_classid(struct sk_buff *skb) - * Description - * Retrieve the classid for the current task, i.e. for the net_cls - * cgroup to which *skb* belongs. - * - * This helper can be used on TC egress path, but not on ingress. - * - * The net_cls cgroup provides an interface to tag network packets - * based on a user-provided identifier for all traffic coming from - * the tasks belonging to the related cgroup. See also the related - * kernel documentation, available from the Linux sources in file - * *Documentation/cgroup-v1/net_cls.txt*. - * - * The Linux kernel has two versions for cgroups: there are - * cgroups v1 and cgroups v2. Both are available to users, who can - * use a mixture of them, but note that the net_cls cgroup is for - * cgroup v1 only. This makes it incompatible with BPF programs - * run on cgroups, which is a cgroup-v2-only feature (a socket can - * only hold data for one version of cgroups at a time). - * - * This helper is only available is the kernel was compiled with - * the **CONFIG_CGROUP_NET_CLASSID** configuration option set to - * "**y**" or to "**m**". - * Return - * The classid, or 0 for the default unconfigured classid. - * - * int bpf_skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci) - * Description - * Push a *vlan_tci* (VLAN tag control information) of protocol - * *vlan_proto* to the packet associated to *skb*, then update - * the checksum. Note that if *vlan_proto* is different from - * **ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to - * be **ETH_P_8021Q**. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_skb_vlan_pop(struct sk_buff *skb) - * Description - * Pop a VLAN header from the packet associated to *skb*. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_skb_get_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags) - * Description - * Get tunnel metadata. This helper takes a pointer *key* to an - * empty **struct bpf_tunnel_key** of **size**, that will be - * filled with tunnel metadata for the packet associated to *skb*. - * The *flags* can be set to **BPF_F_TUNINFO_IPV6**, which - * indicates that the tunnel is based on IPv6 protocol instead of - * IPv4. - * - * The **struct bpf_tunnel_key** is an object that generalizes the - * principal parameters used by various tunneling protocols into a - * single struct. This way, it can be used to easily make a - * decision based on the contents of the encapsulation header, - * "summarized" in this struct. In particular, it holds the IP - * address of the remote end (IPv4 or IPv6, depending on the case) - * in *key*\ **->remote_ipv4** or *key*\ **->remote_ipv6**. Also, - * this struct exposes the *key*\ **->tunnel_id**, which is - * generally mapped to a VNI (Virtual Network Identifier), making - * it programmable together with the **bpf_skb_set_tunnel_key**\ - * () helper. - * - * Let's imagine that the following code is part of a program - * attached to the TC ingress interface, on one end of a GRE - * tunnel, and is supposed to filter out all messages coming from - * remote ends with IPv4 address other than 10.0.0.1: - * - * :: - * - * int ret; - * struct bpf_tunnel_key key = {}; - * - * ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0); - * if (ret < 0) - * return TC_ACT_SHOT; // drop packet - * - * if (key.remote_ipv4 != 0x0a000001) - * return TC_ACT_SHOT; // drop packet - * - * return TC_ACT_OK; // accept packet - * - * This interface can also be used with all encapsulation devices - * that can operate in "collect metadata" mode: instead of having - * one network device per specific configuration, the "collect - * metadata" mode only requires a single device where the - * configuration can be extracted from this helper. - * - * This can be used together with various tunnels such as VXLan, - * Geneve, GRE or IP in IP (IPIP). - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_skb_set_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags) - * Description - * Populate tunnel metadata for packet associated to *skb.* The - * tunnel metadata is set to the contents of *key*, of *size*. The - * *flags* can be set to a combination of the following values: - * - * **BPF_F_TUNINFO_IPV6** - * Indicate that the tunnel is based on IPv6 protocol - * instead of IPv4. - * **BPF_F_ZERO_CSUM_TX** - * For IPv4 packets, add a flag to tunnel metadata - * indicating that checksum computation should be skipped - * and checksum set to zeroes. - * **BPF_F_DONT_FRAGMENT** - * Add a flag to tunnel metadata indicating that the - * packet should not be fragmented. - * **BPF_F_SEQ_NUMBER** - * Add a flag to tunnel metadata indicating that a - * sequence number should be added to tunnel header before - * sending the packet. This flag was added for GRE - * encapsulation, but might be used with other protocols - * as well in the future. - * - * Here is a typical usage on the transmit path: - * - * :: - * - * struct bpf_tunnel_key key; - * populate key ... - * bpf_skb_set_tunnel_key(skb, &key, sizeof(key), 0); - * bpf_clone_redirect(skb, vxlan_dev_ifindex, 0); - * - * See also the description of the **bpf_skb_get_tunnel_key**\ () - * helper for additional information. - * Return - * 0 on success, or a negative error in case of failure. - * - * u64 bpf_perf_event_read(struct bpf_map *map, u64 flags) - * Description - * Read the value of a perf event counter. This helper relies on a - * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of - * the perf event counter is selected when *map* is updated with - * perf event file descriptors. The *map* is an array whose size - * is the number of available CPUs, and each cell contains a value - * relative to one CPU. The value to retrieve is indicated by - * *flags*, that contains the index of the CPU to look up, masked - * with **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to - * **BPF_F_CURRENT_CPU** to indicate that the value for the - * current CPU should be retrieved. - * - * Note that before Linux 4.13, only hardware perf event can be - * retrieved. - * - * Also, be aware that the newer helper - * **bpf_perf_event_read_value**\ () is recommended over - * **bpf_perf_event_read**\ () in general. The latter has some ABI - * quirks where error and counter value are used as a return code - * (which is wrong to do since ranges may overlap). This issue is - * fixed with **bpf_perf_event_read_value**\ (), which at the same - * time provides more features over the **bpf_perf_event_read**\ - * () interface. Please refer to the description of - * **bpf_perf_event_read_value**\ () for details. - * Return - * The value of the perf event counter read from the map, or a - * negative error code in case of failure. - * - * int bpf_redirect(u32 ifindex, u64 flags) - * Description - * Redirect the packet to another net device of index *ifindex*. - * This helper is somewhat similar to **bpf_clone_redirect**\ - * (), except that the packet is not cloned, which provides - * increased performance. - * - * Except for XDP, both ingress and egress interfaces can be used - * for redirection. The **BPF_F_INGRESS** value in *flags* is used - * to make the distinction (ingress path is selected if the flag - * is present, egress path otherwise). Currently, XDP only - * supports redirection to the egress interface, and accepts no - * flag at all. - * - * The same effect can be attained with the more generic - * **bpf_redirect_map**\ (), which requires specific maps to be - * used but offers better performance. - * Return - * For XDP, the helper returns **XDP_REDIRECT** on success or - * **XDP_ABORTED** on error. For other program types, the values - * are **TC_ACT_REDIRECT** on success or **TC_ACT_SHOT** on - * error. - * - * u32 bpf_get_route_realm(struct sk_buff *skb) - * Description - * Retrieve the realm or the route, that is to say the - * **tclassid** field of the destination for the *skb*. The - * indentifier retrieved is a user-provided tag, similar to the - * one used with the net_cls cgroup (see description for - * **bpf_get_cgroup_classid**\ () helper), but here this tag is - * held by a route (a destination entry), not by a task. - * - * Retrieving this identifier works with the clsact TC egress hook - * (see also **tc-bpf(8)**), or alternatively on conventional - * classful egress qdiscs, but not on TC ingress path. In case of - * clsact TC egress hook, this has the advantage that, internally, - * the destination entry has not been dropped yet in the transmit - * path. Therefore, the destination entry does not need to be - * artificially held via **netif_keep_dst**\ () for a classful - * qdisc until the *skb* is freed. - * - * This helper is available only if the kernel was compiled with - * **CONFIG_IP_ROUTE_CLASSID** configuration option. - * Return - * The realm of the route for the packet associated to *skb*, or 0 - * if none was found. - * - * int bpf_perf_event_output(struct pt_reg *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) - * Description - * Write raw *data* blob into a special BPF perf event held by - * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf - * event must have the following attributes: **PERF_SAMPLE_RAW** - * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and - * **PERF_COUNT_SW_BPF_OUTPUT** as **config**. - * - * The *flags* are used to indicate the index in *map* for which - * the value must be put, masked with **BPF_F_INDEX_MASK**. - * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** - * to indicate that the index of the current CPU core should be - * used. - * - * The value to write, of *size*, is passed through eBPF stack and - * pointed by *data*. - * - * The context of the program *ctx* needs also be passed to the - * helper. - * - * On user space, a program willing to read the values needs to - * call **perf_event_open**\ () on the perf event (either for - * one or for all CPUs) and to store the file descriptor into the - * *map*. This must be done before the eBPF program can send data - * into it. An example is available in file - * *samples/bpf/trace_output_user.c* in the Linux kernel source - * tree (the eBPF program counterpart is in - * *samples/bpf/trace_output_kern.c*). - * - * **bpf_perf_event_output**\ () achieves better performance - * than **bpf_trace_printk**\ () for sharing data with user - * space, and is much better suitable for streaming data from eBPF - * programs. - * - * Note that this helper is not restricted to tracing use cases - * and can be used with programs attached to TC or XDP as well, - * where it allows for passing data to user space listeners. Data - * can be: - * - * * Only custom structs, - * * Only the packet payload, or - * * A combination of both. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_skb_load_bytes(const struct sk_buff *skb, u32 offset, void *to, u32 len) - * Description - * This helper was provided as an easy way to load data from a - * packet. It can be used to load *len* bytes from *offset* from - * the packet associated to *skb*, into the buffer pointed by - * *to*. - * - * Since Linux 4.7, usage of this helper has mostly been replaced - * by "direct packet access", enabling packet data to be - * manipulated with *skb*\ **->data** and *skb*\ **->data_end** - * pointing respectively to the first byte of packet data and to - * the byte after the last byte of packet data. However, it - * remains useful if one wishes to read large quantities of data - * at once from a packet into the eBPF stack. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_get_stackid(struct pt_reg *ctx, struct bpf_map *map, u64 flags) - * Description - * Walk a user or a kernel stack and return its id. To achieve - * this, the helper needs *ctx*, which is a pointer to the context - * on which the tracing program is executed, and a pointer to a - * *map* of type **BPF_MAP_TYPE_STACK_TRACE**. - * - * The last argument, *flags*, holds the number of stack frames to - * skip (from 0 to 255), masked with - * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set - * a combination of the following flags: - * - * **BPF_F_USER_STACK** - * Collect a user space stack instead of a kernel stack. - * **BPF_F_FAST_STACK_CMP** - * Compare stacks by hash only. - * **BPF_F_REUSE_STACKID** - * If two different stacks hash into the same *stackid*, - * discard the old one. - * - * The stack id retrieved is a 32 bit long integer handle which - * can be further combined with other data (including other stack - * ids) and used as a key into maps. This can be useful for - * generating a variety of graphs (such as flame graphs or off-cpu - * graphs). - * - * For walking a stack, this helper is an improvement over - * **bpf_probe_read**\ (), which can be used with unrolled loops - * but is not efficient and consumes a lot of eBPF instructions. - * Instead, **bpf_get_stackid**\ () can collect up to - * **PERF_MAX_STACK_DEPTH** both kernel and user frames. Note that - * this limit can be controlled with the **sysctl** program, and - * that it should be manually increased in order to profile long - * user stacks (such as stacks for Java programs). To do so, use: - * - * :: - * - * # sysctl kernel.perf_event_max_stack=<new value> - * Return - * The positive or null stack id on success, or a negative error - * in case of failure. - * - * s64 bpf_csum_diff(__be32 *from, u32 from_size, __be32 *to, u32 to_size, __wsum seed) - * Description - * Compute a checksum difference, from the raw buffer pointed by - * *from*, of length *from_size* (that must be a multiple of 4), - * towards the raw buffer pointed by *to*, of size *to_size* - * (same remark). An optional *seed* can be added to the value - * (this can be cascaded, the seed may come from a previous call - * to the helper). - * - * This is flexible enough to be used in several ways: - * - * * With *from_size* == 0, *to_size* > 0 and *seed* set to - * checksum, it can be used when pushing new data. - * * With *from_size* > 0, *to_size* == 0 and *seed* set to - * checksum, it can be used when removing data from a packet. - * * With *from_size* > 0, *to_size* > 0 and *seed* set to 0, it - * can be used to compute a diff. Note that *from_size* and - * *to_size* do not need to be equal. - * - * This helper can be used in combination with - * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ (), to - * which one can feed in the difference computed with - * **bpf_csum_diff**\ (). - * Return - * The checksum result, or a negative error code in case of - * failure. - * - * int bpf_skb_get_tunnel_opt(struct sk_buff *skb, u8 *opt, u32 size) - * Description - * Retrieve tunnel options metadata for the packet associated to - * *skb*, and store the raw tunnel option data to the buffer *opt* - * of *size*. - * - * This helper can be used with encapsulation devices that can - * operate in "collect metadata" mode (please refer to the related - * note in the description of **bpf_skb_get_tunnel_key**\ () for - * more details). A particular example where this can be used is - * in combination with the Geneve encapsulation protocol, where it - * allows for pushing (with **bpf_skb_get_tunnel_opt**\ () helper) - * and retrieving arbitrary TLVs (Type-Length-Value headers) from - * the eBPF program. This allows for full customization of these - * headers. - * Return - * The size of the option data retrieved. - * - * int bpf_skb_set_tunnel_opt(struct sk_buff *skb, u8 *opt, u32 size) - * Description - * Set tunnel options metadata for the packet associated to *skb* - * to the option data contained in the raw buffer *opt* of *size*. - * - * See also the description of the **bpf_skb_get_tunnel_opt**\ () - * helper for additional information. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_skb_change_proto(struct sk_buff *skb, __be16 proto, u64 flags) - * Description - * Change the protocol of the *skb* to *proto*. Currently - * supported are transition from IPv4 to IPv6, and from IPv6 to - * IPv4. The helper takes care of the groundwork for the - * transition, including resizing the socket buffer. The eBPF - * program is expected to fill the new headers, if any, via - * **skb_store_bytes**\ () and to recompute the checksums with - * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ - * (). The main case for this helper is to perform NAT64 - * operations out of an eBPF program. - * - * Internally, the GSO type is marked as dodgy so that headers are - * checked and segments are recalculated by the GSO/GRO engine. - * The size for GSO target is adapted as well. - * - * All values for *flags* are reserved for future usage, and must - * be left at zero. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_skb_change_type(struct sk_buff *skb, u32 type) - * Description - * Change the packet type for the packet associated to *skb*. This - * comes down to setting *skb*\ **->pkt_type** to *type*, except - * the eBPF program does not have a write access to *skb*\ - * **->pkt_type** beside this helper. Using a helper here allows - * for graceful handling of errors. - * - * The major use case is to change incoming *skb*s to - * **PACKET_HOST** in a programmatic way instead of having to - * recirculate via **redirect**\ (..., **BPF_F_INGRESS**), for - * example. - * - * Note that *type* only allows certain values. At this time, they - * are: - * - * **PACKET_HOST** - * Packet is for us. - * **PACKET_BROADCAST** - * Send packet to all. - * **PACKET_MULTICAST** - * Send packet to group. - * **PACKET_OTHERHOST** - * Send packet to someone else. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_skb_under_cgroup(struct sk_buff *skb, struct bpf_map *map, u32 index) - * Description - * Check whether *skb* is a descendant of the cgroup2 held by - * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*. - * Return - * The return value depends on the result of the test, and can be: - * - * * 0, if the *skb* failed the cgroup2 descendant test. - * * 1, if the *skb* succeeded the cgroup2 descendant test. - * * A negative error code, if an error occurred. - * - * u32 bpf_get_hash_recalc(struct sk_buff *skb) - * Description - * Retrieve the hash of the packet, *skb*\ **->hash**. If it is - * not set, in particular if the hash was cleared due to mangling, - * recompute this hash. Later accesses to the hash can be done - * directly with *skb*\ **->hash**. - * - * Calling **bpf_set_hash_invalid**\ (), changing a packet - * prototype with **bpf_skb_change_proto**\ (), or calling - * **bpf_skb_store_bytes**\ () with the - * **BPF_F_INVALIDATE_HASH** are actions susceptible to clear - * the hash and to trigger a new computation for the next call to - * **bpf_get_hash_recalc**\ (). - * Return - * The 32-bit hash. - * - * u64 bpf_get_current_task(void) - * Return - * A pointer to the current task struct. - * - * int bpf_probe_write_user(void *dst, const void *src, u32 len) - * Description - * Attempt in a safe way to write *len* bytes from the buffer - * *src* to *dst* in memory. It only works for threads that are in - * user context, and *dst* must be a valid user space address. - * - * This helper should not be used to implement any kind of - * security mechanism because of TOC-TOU attacks, but rather to - * debug, divert, and manipulate execution of semi-cooperative - * processes. - * - * Keep in mind that this feature is meant for experiments, and it - * has a risk of crashing the system and running programs. - * Therefore, when an eBPF program using this helper is attached, - * a warning including PID and process name is printed to kernel - * logs. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_current_task_under_cgroup(struct bpf_map *map, u32 index) - * Description - * Check whether the probe is being run is the context of a given - * subset of the cgroup2 hierarchy. The cgroup2 to test is held by - * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*. - * Return - * The return value depends on the result of the test, and can be: - * - * * 0, if the *skb* task belongs to the cgroup2. - * * 1, if the *skb* task does not belong to the cgroup2. - * * A negative error code, if an error occurred. - * - * int bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags) - * Description - * Resize (trim or grow) the packet associated to *skb* to the - * new *len*. The *flags* are reserved for future usage, and must - * be left at zero. - * - * The basic idea is that the helper performs the needed work to - * change the size of the packet, then the eBPF program rewrites - * the rest via helpers like **bpf_skb_store_bytes**\ (), - * **bpf_l3_csum_replace**\ (), **bpf_l3_csum_replace**\ () - * and others. This helper is a slow path utility intended for - * replies with control messages. And because it is targeted for - * slow path, the helper itself can afford to be slow: it - * implicitly linearizes, unclones and drops offloads from the - * *skb*. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_skb_pull_data(struct sk_buff *skb, u32 len) - * Description - * Pull in non-linear data in case the *skb* is non-linear and not - * all of *len* are part of the linear section. Make *len* bytes - * from *skb* readable and writable. If a zero value is passed for - * *len*, then the whole length of the *skb* is pulled. - * - * This helper is only needed for reading and writing with direct - * packet access. - * - * For direct packet access, testing that offsets to access - * are within packet boundaries (test on *skb*\ **->data_end**) is - * susceptible to fail if offsets are invalid, or if the requested - * data is in non-linear parts of the *skb*. On failure the - * program can just bail out, or in the case of a non-linear - * buffer, use a helper to make the data available. The - * **bpf_skb_load_bytes**\ () helper is a first solution to access - * the data. Another one consists in using **bpf_skb_pull_data** - * to pull in once the non-linear parts, then retesting and - * eventually access the data. - * - * At the same time, this also makes sure the *skb* is uncloned, - * which is a necessary condition for direct write. As this needs - * to be an invariant for the write part only, the verifier - * detects writes and adds a prologue that is calling - * **bpf_skb_pull_data()** to effectively unclone the *skb* from - * the very beginning in case it is indeed cloned. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * s64 bpf_csum_update(struct sk_buff *skb, __wsum csum) - * Description - * Add the checksum *csum* into *skb*\ **->csum** in case the - * driver has supplied a checksum for the entire packet into that - * field. Return an error otherwise. This helper is intended to be - * used in combination with **bpf_csum_diff**\ (), in particular - * when the checksum needs to be updated after data has been - * written into the packet through direct packet access. - * Return - * The checksum on success, or a negative error code in case of - * failure. - * - * void bpf_set_hash_invalid(struct sk_buff *skb) - * Description - * Invalidate the current *skb*\ **->hash**. It can be used after - * mangling on headers through direct packet access, in order to - * indicate that the hash is outdated and to trigger a - * recalculation the next time the kernel tries to access this - * hash or when the **bpf_get_hash_recalc**\ () helper is called. - * - * int bpf_get_numa_node_id(void) - * Description - * Return the id of the current NUMA node. The primary use case - * for this helper is the selection of sockets for the local NUMA - * node, when the program is attached to sockets using the - * **SO_ATTACH_REUSEPORT_EBPF** option (see also **socket(7)**), - * but the helper is also available to other eBPF program types, - * similarly to **bpf_get_smp_processor_id**\ (). - * Return - * The id of current NUMA node. - * - * int bpf_skb_change_head(struct sk_buff *skb, u32 len, u64 flags) - * Description - * Grows headroom of packet associated to *skb* and adjusts the - * offset of the MAC header accordingly, adding *len* bytes of - * space. It automatically extends and reallocates memory as - * required. - * - * This helper can be used on a layer 3 *skb* to push a MAC header - * for redirection into a layer 2 device. - * - * All values for *flags* are reserved for future usage, and must - * be left at zero. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_xdp_adjust_head(struct xdp_buff *xdp_md, int delta) - * Description - * Adjust (move) *xdp_md*\ **->data** by *delta* bytes. Note that - * it is possible to use a negative value for *delta*. This helper - * can be used to prepare the packet for pushing or popping - * headers. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_probe_read_str(void *dst, int size, const void *unsafe_ptr) - * Description - * Copy a NUL terminated string from an unsafe address - * *unsafe_ptr* to *dst*. The *size* should include the - * terminating NUL byte. In case the string length is smaller than - * *size*, the target is not padded with further NUL bytes. If the - * string length is larger than *size*, just *size*-1 bytes are - * copied and the last byte is set to NUL. - * - * On success, the length of the copied string is returned. This - * makes this helper useful in tracing programs for reading - * strings, and more importantly to get its length at runtime. See - * the following snippet: - * - * :: - * - * SEC("kprobe/sys_open") - * void bpf_sys_open(struct pt_regs *ctx) - * { - * char buf[PATHLEN]; // PATHLEN is defined to 256 - * int res = bpf_probe_read_str(buf, sizeof(buf), - * ctx->di); - * - * // Consume buf, for example push it to - * // userspace via bpf_perf_event_output(); we - * // can use res (the string length) as event - * // size, after checking its boundaries. - * } - * - * In comparison, using **bpf_probe_read()** helper here instead - * to read the string would require to estimate the length at - * compile time, and would often result in copying more memory - * than necessary. - * - * Another useful use case is when parsing individual process - * arguments or individual environment variables navigating - * *current*\ **->mm->arg_start** and *current*\ - * **->mm->env_start**: using this helper and the return value, - * one can quickly iterate at the right offset of the memory area. - * Return - * On success, the strictly positive length of the string, - * including the trailing NUL character. On error, a negative - * value. - * - * u64 bpf_get_socket_cookie(struct sk_buff *skb) - * Description - * If the **struct sk_buff** pointed by *skb* has a known socket, - * retrieve the cookie (generated by the kernel) of this socket. - * If no cookie has been set yet, generate a new cookie. Once - * generated, the socket cookie remains stable for the life of the - * socket. This helper can be useful for monitoring per socket - * networking traffic statistics as it provides a unique socket - * identifier per namespace. - * Return - * A 8-byte long non-decreasing number on success, or 0 if the - * socket field is missing inside *skb*. - * - * u64 bpf_get_socket_cookie(struct bpf_sock_addr *ctx) - * Description - * Equivalent to bpf_get_socket_cookie() helper that accepts - * *skb*, but gets socket from **struct bpf_sock_addr** context. - * Return - * A 8-byte long non-decreasing number. - * - * u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx) - * Description - * Equivalent to bpf_get_socket_cookie() helper that accepts - * *skb*, but gets socket from **struct bpf_sock_ops** context. - * Return - * A 8-byte long non-decreasing number. - * - * u32 bpf_get_socket_uid(struct sk_buff *skb) - * Return - * The owner UID of the socket associated to *skb*. If the socket - * is **NULL**, or if it is not a full socket (i.e. if it is a - * time-wait or a request socket instead), **overflowuid** value - * is returned (note that **overflowuid** might also be the actual - * UID value for the socket). - * - * u32 bpf_set_hash(struct sk_buff *skb, u32 hash) - * Description - * Set the full hash for *skb* (set the field *skb*\ **->hash**) - * to value *hash*. - * Return - * 0 - * - * int bpf_setsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, char *optval, int optlen) - * Description - * Emulate a call to **setsockopt()** on the socket associated to - * *bpf_socket*, which must be a full socket. The *level* at - * which the option resides and the name *optname* of the option - * must be specified, see **setsockopt(2)** for more information. - * The option value of length *optlen* is pointed by *optval*. - * - * This helper actually implements a subset of **setsockopt()**. - * It supports the following *level*\ s: - * - * * **SOL_SOCKET**, which supports the following *optname*\ s: - * **SO_RCVBUF**, **SO_SNDBUF**, **SO_MAX_PACING_RATE**, - * **SO_PRIORITY**, **SO_RCVLOWAT**, **SO_MARK**. - * * **IPPROTO_TCP**, which supports the following *optname*\ s: - * **TCP_CONGESTION**, **TCP_BPF_IW**, - * **TCP_BPF_SNDCWND_CLAMP**. - * * **IPPROTO_IP**, which supports *optname* **IP_TOS**. - * * **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_skb_adjust_room(struct sk_buff *skb, s32 len_diff, u32 mode, u64 flags) - * Description - * Grow or shrink the room for data in the packet associated to - * *skb* by *len_diff*, and according to the selected *mode*. - * - * There are two supported modes at this time: - * - * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer - * (room space is added or removed below the layer 2 header). - * - * * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer - * (room space is added or removed below the layer 3 header). - * - * The following flags are supported at this time: - * - * * **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size. - * Adjusting mss in this way is not allowed for datagrams. - * - * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 **: - * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 **: - * Any new space is reserved to hold a tunnel header. - * Configure skb offsets and other fields accordingly. - * - * * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE **: - * * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP **: - * Use with ENCAP_L3 flags to further specify the tunnel type. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_redirect_map(struct bpf_map *map, u32 key, u64 flags) - * Description - * Redirect the packet to the endpoint referenced by *map* at - * index *key*. Depending on its type, this *map* can contain - * references to net devices (for forwarding packets through other - * ports), or to CPUs (for redirecting XDP frames to another CPU; - * but this is only implemented for native XDP (with driver - * support) as of this writing). - * - * All values for *flags* are reserved for future usage, and must - * be left at zero. - * - * When used to redirect packets to net devices, this helper - * provides a high performance increase over **bpf_redirect**\ (). - * This is due to various implementation details of the underlying - * mechanisms, one of which is the fact that **bpf_redirect_map**\ - * () tries to send packet as a "bulk" to the device. - * Return - * **XDP_REDIRECT** on success, or **XDP_ABORTED** on error. - * - * int bpf_sk_redirect_map(struct bpf_map *map, u32 key, u64 flags) - * Description - * Redirect the packet to the socket referenced by *map* (of type - * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and - * egress interfaces can be used for redirection. The - * **BPF_F_INGRESS** value in *flags* is used to make the - * distinction (ingress path is selected if the flag is present, - * egress path otherwise). This is the only flag supported for now. - * Return - * **SK_PASS** on success, or **SK_DROP** on error. - * - * int bpf_sock_map_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags) - * Description - * Add an entry to, or update a *map* referencing sockets. The - * *skops* is used as a new value for the entry associated to - * *key*. *flags* is one of: - * - * **BPF_NOEXIST** - * The entry for *key* must not exist in the map. - * **BPF_EXIST** - * The entry for *key* must already exist in the map. - * **BPF_ANY** - * No condition on the existence of the entry for *key*. - * - * If the *map* has eBPF programs (parser and verdict), those will - * be inherited by the socket being added. If the socket is - * already attached to eBPF programs, this results in an error. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_xdp_adjust_meta(struct xdp_buff *xdp_md, int delta) - * Description - * Adjust the address pointed by *xdp_md*\ **->data_meta** by - * *delta* (which can be positive or negative). Note that this - * operation modifies the address stored in *xdp_md*\ **->data**, - * so the latter must be loaded only after the helper has been - * called. - * - * The use of *xdp_md*\ **->data_meta** is optional and programs - * are not required to use it. The rationale is that when the - * packet is processed with XDP (e.g. as DoS filter), it is - * possible to push further meta data along with it before passing - * to the stack, and to give the guarantee that an ingress eBPF - * program attached as a TC classifier on the same device can pick - * this up for further post-processing. Since TC works with socket - * buffers, it remains possible to set from XDP the **mark** or - * **priority** pointers, or other pointers for the socket buffer. - * Having this scratch space generic and programmable allows for - * more flexibility as the user is free to store whatever meta - * data they need. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_perf_event_read_value(struct bpf_map *map, u64 flags, struct bpf_perf_event_value *buf, u32 buf_size) - * Description - * Read the value of a perf event counter, and store it into *buf* - * of size *buf_size*. This helper relies on a *map* of type - * **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of the perf event - * counter is selected when *map* is updated with perf event file - * descriptors. The *map* is an array whose size is the number of - * available CPUs, and each cell contains a value relative to one - * CPU. The value to retrieve is indicated by *flags*, that - * contains the index of the CPU to look up, masked with - * **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to - * **BPF_F_CURRENT_CPU** to indicate that the value for the - * current CPU should be retrieved. - * - * This helper behaves in a way close to - * **bpf_perf_event_read**\ () helper, save that instead of - * just returning the value observed, it fills the *buf* - * structure. This allows for additional data to be retrieved: in - * particular, the enabled and running times (in *buf*\ - * **->enabled** and *buf*\ **->running**, respectively) are - * copied. In general, **bpf_perf_event_read_value**\ () is - * recommended over **bpf_perf_event_read**\ (), which has some - * ABI issues and provides fewer functionalities. - * - * These values are interesting, because hardware PMU (Performance - * Monitoring Unit) counters are limited resources. When there are - * more PMU based perf events opened than available counters, - * kernel will multiplex these events so each event gets certain - * percentage (but not all) of the PMU time. In case that - * multiplexing happens, the number of samples or counter value - * will not reflect the case compared to when no multiplexing - * occurs. This makes comparison between different runs difficult. - * Typically, the counter value should be normalized before - * comparing to other experiments. The usual normalization is done - * as follows. - * - * :: - * - * normalized_counter = counter * t_enabled / t_running - * - * Where t_enabled is the time enabled for event and t_running is - * the time running for event since last normalization. The - * enabled and running times are accumulated since the perf event - * open. To achieve scaling factor between two invocations of an - * eBPF program, users can can use CPU id as the key (which is - * typical for perf array usage model) to remember the previous - * value and do the calculation inside the eBPF program. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_perf_prog_read_value(struct bpf_perf_event_data *ctx, struct bpf_perf_event_value *buf, u32 buf_size) - * Description - * For en eBPF program attached to a perf event, retrieve the - * value of the event counter associated to *ctx* and store it in - * the structure pointed by *buf* and of size *buf_size*. Enabled - * and running times are also stored in the structure (see - * description of helper **bpf_perf_event_read_value**\ () for - * more details). - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_getsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, char *optval, int optlen) - * Description - * Emulate a call to **getsockopt()** on the socket associated to - * *bpf_socket*, which must be a full socket. The *level* at - * which the option resides and the name *optname* of the option - * must be specified, see **getsockopt(2)** for more information. - * The retrieved value is stored in the structure pointed by - * *opval* and of length *optlen*. - * - * This helper actually implements a subset of **getsockopt()**. - * It supports the following *level*\ s: - * - * * **IPPROTO_TCP**, which supports *optname* - * **TCP_CONGESTION**. - * * **IPPROTO_IP**, which supports *optname* **IP_TOS**. - * * **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_override_return(struct pt_reg *regs, u64 rc) - * Description - * Used for error injection, this helper uses kprobes to override - * the return value of the probed function, and to set it to *rc*. - * The first argument is the context *regs* on which the kprobe - * works. - * - * This helper works by setting setting the PC (program counter) - * to an override function which is run in place of the original - * probed function. This means the probed function is not run at - * all. The replacement function just returns with the required - * value. - * - * This helper has security implications, and thus is subject to - * restrictions. It is only available if the kernel was compiled - * with the **CONFIG_BPF_KPROBE_OVERRIDE** configuration - * option, and in this case it only works on functions tagged with - * **ALLOW_ERROR_INJECTION** in the kernel code. - * - * Also, the helper is only available for the architectures having - * the CONFIG_FUNCTION_ERROR_INJECTION option. As of this writing, - * x86 architecture is the only one to support this feature. - * Return - * 0 - * - * int bpf_sock_ops_cb_flags_set(struct bpf_sock_ops *bpf_sock, int argval) - * Description - * Attempt to set the value of the **bpf_sock_ops_cb_flags** field - * for the full TCP socket associated to *bpf_sock_ops* to - * *argval*. - * - * The primary use of this field is to determine if there should - * be calls to eBPF programs of type - * **BPF_PROG_TYPE_SOCK_OPS** at various points in the TCP - * code. A program of the same type can change its value, per - * connection and as necessary, when the connection is - * established. This field is directly accessible for reading, but - * this helper must be used for updates in order to return an - * error if an eBPF program tries to set a callback that is not - * supported in the current kernel. - * - * The supported callback values that *argval* can combine are: - * - * * **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out) - * * **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission) - * * **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change) - * - * Here are some examples of where one could call such eBPF - * program: - * - * * When RTO fires. - * * When a packet is retransmitted. - * * When the connection terminates. - * * When a packet is sent. - * * When a packet is received. - * Return - * Code **-EINVAL** if the socket is not a full TCP socket; - * otherwise, a positive number containing the bits that could not - * be set is returned (which comes down to 0 if all bits were set - * as required). - * - * int bpf_msg_redirect_map(struct sk_msg_buff *msg, struct bpf_map *map, u32 key, u64 flags) - * Description - * This helper is used in programs implementing policies at the - * socket level. If the message *msg* is allowed to pass (i.e. if - * the verdict eBPF program returns **SK_PASS**), redirect it to - * the socket referenced by *map* (of type - * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and - * egress interfaces can be used for redirection. The - * **BPF_F_INGRESS** value in *flags* is used to make the - * distinction (ingress path is selected if the flag is present, - * egress path otherwise). This is the only flag supported for now. - * Return - * **SK_PASS** on success, or **SK_DROP** on error. - * - * int bpf_msg_apply_bytes(struct sk_msg_buff *msg, u32 bytes) - * Description - * For socket policies, apply the verdict of the eBPF program to - * the next *bytes* (number of bytes) of message *msg*. - * - * For example, this helper can be used in the following cases: - * - * * A single **sendmsg**\ () or **sendfile**\ () system call - * contains multiple logical messages that the eBPF program is - * supposed to read and for which it should apply a verdict. - * * An eBPF program only cares to read the first *bytes* of a - * *msg*. If the message has a large payload, then setting up - * and calling the eBPF program repeatedly for all bytes, even - * though the verdict is already known, would create unnecessary - * overhead. - * - * When called from within an eBPF program, the helper sets a - * counter internal to the BPF infrastructure, that is used to - * apply the last verdict to the next *bytes*. If *bytes* is - * smaller than the current data being processed from a - * **sendmsg**\ () or **sendfile**\ () system call, the first - * *bytes* will be sent and the eBPF program will be re-run with - * the pointer for start of data pointing to byte number *bytes* - * **+ 1**. If *bytes* is larger than the current data being - * processed, then the eBPF verdict will be applied to multiple - * **sendmsg**\ () or **sendfile**\ () calls until *bytes* are - * consumed. - * - * Note that if a socket closes with the internal counter holding - * a non-zero value, this is not a problem because data is not - * being buffered for *bytes* and is sent as it is received. - * Return - * 0 - * - * int bpf_msg_cork_bytes(struct sk_msg_buff *msg, u32 bytes) - * Description - * For socket policies, prevent the execution of the verdict eBPF - * program for message *msg* until *bytes* (byte number) have been - * accumulated. - * - * This can be used when one needs a specific number of bytes - * before a verdict can be assigned, even if the data spans - * multiple **sendmsg**\ () or **sendfile**\ () calls. The extreme - * case would be a user calling **sendmsg**\ () repeatedly with - * 1-byte long message segments. Obviously, this is bad for - * performance, but it is still valid. If the eBPF program needs - * *bytes* bytes to validate a header, this helper can be used to - * prevent the eBPF program to be called again until *bytes* have - * been accumulated. - * Return - * 0 - * - * int bpf_msg_pull_data(struct sk_msg_buff *msg, u32 start, u32 end, u64 flags) - * Description - * For socket policies, pull in non-linear data from user space - * for *msg* and set pointers *msg*\ **->data** and *msg*\ - * **->data_end** to *start* and *end* bytes offsets into *msg*, - * respectively. - * - * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a - * *msg* it can only parse data that the (**data**, **data_end**) - * pointers have already consumed. For **sendmsg**\ () hooks this - * is likely the first scatterlist element. But for calls relying - * on the **sendpage** handler (e.g. **sendfile**\ ()) this will - * be the range (**0**, **0**) because the data is shared with - * user space and by default the objective is to avoid allowing - * user space to modify data while (or after) eBPF verdict is - * being decided. This helper can be used to pull in data and to - * set the start and end pointer to given values. Data will be - * copied if necessary (i.e. if data was not linear and if start - * and end pointers do not point to the same chunk). - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * - * All values for *flags* are reserved for future usage, and must - * be left at zero. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_bind(struct bpf_sock_addr *ctx, struct sockaddr *addr, int addr_len) - * Description - * Bind the socket associated to *ctx* to the address pointed by - * *addr*, of length *addr_len*. This allows for making outgoing - * connection from the desired IP address, which can be useful for - * example when all processes inside a cgroup should use one - * single IP address on a host that has multiple IP configured. - * - * This helper works for IPv4 and IPv6, TCP and UDP sockets. The - * domain (*addr*\ **->sa_family**) must be **AF_INET** (or - * **AF_INET6**). Looking for a free port to bind to can be - * expensive, therefore binding to port is not permitted by the - * helper: *addr*\ **->sin_port** (or **sin6_port**, respectively) - * must be set to zero. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_xdp_adjust_tail(struct xdp_buff *xdp_md, int delta) - * Description - * Adjust (move) *xdp_md*\ **->data_end** by *delta* bytes. It is - * only possible to shrink the packet as of this writing, - * therefore *delta* must be a negative integer. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_skb_get_xfrm_state(struct sk_buff *skb, u32 index, struct bpf_xfrm_state *xfrm_state, u32 size, u64 flags) - * Description - * Retrieve the XFRM state (IP transform framework, see also - * **ip-xfrm(8)**) at *index* in XFRM "security path" for *skb*. - * - * The retrieved value is stored in the **struct bpf_xfrm_state** - * pointed by *xfrm_state* and of length *size*. - * - * All values for *flags* are reserved for future usage, and must - * be left at zero. - * - * This helper is available only if the kernel was compiled with - * **CONFIG_XFRM** configuration option. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_get_stack(struct pt_regs *regs, void *buf, u32 size, u64 flags) - * Description - * Return a user or a kernel stack in bpf program provided buffer. - * To achieve this, the helper needs *ctx*, which is a pointer - * to the context on which the tracing program is executed. - * To store the stacktrace, the bpf program provides *buf* with - * a nonnegative *size*. - * - * The last argument, *flags*, holds the number of stack frames to - * skip (from 0 to 255), masked with - * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set - * the following flags: - * - * **BPF_F_USER_STACK** - * Collect a user space stack instead of a kernel stack. - * **BPF_F_USER_BUILD_ID** - * Collect buildid+offset instead of ips for user stack, - * only valid if **BPF_F_USER_STACK** is also specified. - * - * **bpf_get_stack**\ () can collect up to - * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject - * to sufficient large buffer size. Note that - * this limit can be controlled with the **sysctl** program, and - * that it should be manually increased in order to profile long - * user stacks (such as stacks for Java programs). To do so, use: - * - * :: - * - * # sysctl kernel.perf_event_max_stack=<new value> - * Return - * A non-negative value equal to or less than *size* on success, - * or a negative error in case of failure. - * - * int bpf_skb_load_bytes_relative(const struct sk_buff *skb, u32 offset, void *to, u32 len, u32 start_header) - * Description - * This helper is similar to **bpf_skb_load_bytes**\ () in that - * it provides an easy way to load *len* bytes from *offset* - * from the packet associated to *skb*, into the buffer pointed - * by *to*. The difference to **bpf_skb_load_bytes**\ () is that - * a fifth argument *start_header* exists in order to select a - * base offset to start from. *start_header* can be one of: - * - * **BPF_HDR_START_MAC** - * Base offset to load data from is *skb*'s mac header. - * **BPF_HDR_START_NET** - * Base offset to load data from is *skb*'s network header. - * - * In general, "direct packet access" is the preferred method to - * access packet data, however, this helper is in particular useful - * in socket filters where *skb*\ **->data** does not always point - * to the start of the mac header and where "direct packet access" - * is not available. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_fib_lookup(void *ctx, struct bpf_fib_lookup *params, int plen, u32 flags) - * Description - * Do FIB lookup in kernel tables using parameters in *params*. - * If lookup is successful and result shows packet is to be - * forwarded, the neighbor tables are searched for the nexthop. - * If successful (ie., FIB lookup shows forwarding and nexthop - * is resolved), the nexthop address is returned in ipv4_dst - * or ipv6_dst based on family, smac is set to mac address of - * egress device, dmac is set to nexthop mac address, rt_metric - * is set to metric from route (IPv4/IPv6 only), and ifindex - * is set to the device index of the nexthop from the FIB lookup. - * - * *plen* argument is the size of the passed in struct. - * *flags* argument can be a combination of one or more of the - * following values: - * - * **BPF_FIB_LOOKUP_DIRECT** - * Do a direct table lookup vs full lookup using FIB - * rules. - * **BPF_FIB_LOOKUP_OUTPUT** - * Perform lookup from an egress perspective (default is - * ingress). - * - * *ctx* is either **struct xdp_md** for XDP programs or - * **struct sk_buff** tc cls_act programs. - * Return - * * < 0 if any input argument is invalid - * * 0 on success (packet is forwarded, nexthop neighbor exists) - * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the - * packet is not forwarded or needs assist from full stack - * - * int bpf_sock_hash_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags) - * Description - * Add an entry to, or update a sockhash *map* referencing sockets. - * The *skops* is used as a new value for the entry associated to - * *key*. *flags* is one of: - * - * **BPF_NOEXIST** - * The entry for *key* must not exist in the map. - * **BPF_EXIST** - * The entry for *key* must already exist in the map. - * **BPF_ANY** - * No condition on the existence of the entry for *key*. - * - * If the *map* has eBPF programs (parser and verdict), those will - * be inherited by the socket being added. If the socket is - * already attached to eBPF programs, this results in an error. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_msg_redirect_hash(struct sk_msg_buff *msg, struct bpf_map *map, void *key, u64 flags) - * Description - * This helper is used in programs implementing policies at the - * socket level. If the message *msg* is allowed to pass (i.e. if - * the verdict eBPF program returns **SK_PASS**), redirect it to - * the socket referenced by *map* (of type - * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and - * egress interfaces can be used for redirection. The - * **BPF_F_INGRESS** value in *flags* is used to make the - * distinction (ingress path is selected if the flag is present, - * egress path otherwise). This is the only flag supported for now. - * Return - * **SK_PASS** on success, or **SK_DROP** on error. - * - * int bpf_sk_redirect_hash(struct sk_buff *skb, struct bpf_map *map, void *key, u64 flags) - * Description - * This helper is used in programs implementing policies at the - * skb socket level. If the sk_buff *skb* is allowed to pass (i.e. - * if the verdeict eBPF program returns **SK_PASS**), redirect it - * to the socket referenced by *map* (of type - * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and - * egress interfaces can be used for redirection. The - * **BPF_F_INGRESS** value in *flags* is used to make the - * distinction (ingress path is selected if the flag is present, - * egress otherwise). This is the only flag supported for now. - * Return - * **SK_PASS** on success, or **SK_DROP** on error. - * - * int bpf_lwt_push_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len) - * Description - * Encapsulate the packet associated to *skb* within a Layer 3 - * protocol header. This header is provided in the buffer at - * address *hdr*, with *len* its size in bytes. *type* indicates - * the protocol of the header and can be one of: - * - * **BPF_LWT_ENCAP_SEG6** - * IPv6 encapsulation with Segment Routing Header - * (**struct ipv6_sr_hdr**). *hdr* only contains the SRH, - * the IPv6 header is computed by the kernel. - * **BPF_LWT_ENCAP_SEG6_INLINE** - * Only works if *skb* contains an IPv6 packet. Insert a - * Segment Routing Header (**struct ipv6_sr_hdr**) inside - * the IPv6 header. - * **BPF_LWT_ENCAP_IP** - * IP encapsulation (GRE/GUE/IPIP/etc). The outer header - * must be IPv4 or IPv6, followed by zero or more - * additional headers, up to LWT_BPF_MAX_HEADROOM total - * bytes in all prepended headers. Please note that - * if skb_is_gso(skb) is true, no more than two headers - * can be prepended, and the inner header, if present, - * should be either GRE or UDP/GUE. - * - * BPF_LWT_ENCAP_SEG6*** types can be called by bpf programs of - * type BPF_PROG_TYPE_LWT_IN; BPF_LWT_ENCAP_IP type can be called - * by bpf programs of types BPF_PROG_TYPE_LWT_IN and - * BPF_PROG_TYPE_LWT_XMIT. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_lwt_seg6_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len) - * Description - * Store *len* bytes from address *from* into the packet - * associated to *skb*, at *offset*. Only the flags, tag and TLVs - * inside the outermost IPv6 Segment Routing Header can be - * modified through this helper. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_lwt_seg6_adjust_srh(struct sk_buff *skb, u32 offset, s32 delta) - * Description - * Adjust the size allocated to TLVs in the outermost IPv6 - * Segment Routing Header contained in the packet associated to - * *skb*, at position *offset* by *delta* bytes. Only offsets - * after the segments are accepted. *delta* can be as well - * positive (growing) as negative (shrinking). - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_lwt_seg6_action(struct sk_buff *skb, u32 action, void *param, u32 param_len) - * Description - * Apply an IPv6 Segment Routing action of type *action* to the - * packet associated to *skb*. Each action takes a parameter - * contained at address *param*, and of length *param_len* bytes. - * *action* can be one of: - * - * **SEG6_LOCAL_ACTION_END_X** - * End.X action: Endpoint with Layer-3 cross-connect. - * Type of *param*: **struct in6_addr**. - * **SEG6_LOCAL_ACTION_END_T** - * End.T action: Endpoint with specific IPv6 table lookup. - * Type of *param*: **int**. - * **SEG6_LOCAL_ACTION_END_B6** - * End.B6 action: Endpoint bound to an SRv6 policy. - * Type of param: **struct ipv6_sr_hdr**. - * **SEG6_LOCAL_ACTION_END_B6_ENCAP** - * End.B6.Encap action: Endpoint bound to an SRv6 - * encapsulation policy. - * Type of param: **struct ipv6_sr_hdr**. - * - * A call to this helper is susceptible to change the underlaying - * packet buffer. Therefore, at load time, all checks on pointers - * previously done by the verifier are invalidated and must be - * performed again, if the helper is used in combination with - * direct packet access. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_rc_repeat(void *ctx) - * Description - * This helper is used in programs implementing IR decoding, to - * report a successfully decoded repeat key message. This delays - * the generation of a key up event for previously generated - * key down event. - * - * Some IR protocols like NEC have a special IR message for - * repeating last button, for when a button is held down. - * - * The *ctx* should point to the lirc sample as passed into - * the program. - * - * This helper is only available is the kernel was compiled with - * the **CONFIG_BPF_LIRC_MODE2** configuration option set to - * "**y**". - * Return - * 0 - * - * int bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle) - * Description - * This helper is used in programs implementing IR decoding, to - * report a successfully decoded key press with *scancode*, - * *toggle* value in the given *protocol*. The scancode will be - * translated to a keycode using the rc keymap, and reported as - * an input key down event. After a period a key up event is - * generated. This period can be extended by calling either - * **bpf_rc_keydown**\ () again with the same values, or calling - * **bpf_rc_repeat**\ (). - * - * Some protocols include a toggle bit, in case the button was - * released and pressed again between consecutive scancodes. - * - * The *ctx* should point to the lirc sample as passed into - * the program. - * - * The *protocol* is the decoded protocol number (see - * **enum rc_proto** for some predefined values). - * - * This helper is only available is the kernel was compiled with - * the **CONFIG_BPF_LIRC_MODE2** configuration option set to - * "**y**". - * Return - * 0 - * - * u64 bpf_skb_cgroup_id(struct sk_buff *skb) - * Description - * Return the cgroup v2 id of the socket associated with the *skb*. - * This is roughly similar to the **bpf_get_cgroup_classid**\ () - * helper for cgroup v1 by providing a tag resp. identifier that - * can be matched on or used for map lookups e.g. to implement - * policy. The cgroup v2 id of a given path in the hierarchy is - * exposed in user space through the f_handle API in order to get - * to the same 64-bit id. - * - * This helper can be used on TC egress path, but not on ingress, - * and is available only if the kernel was compiled with the - * **CONFIG_SOCK_CGROUP_DATA** configuration option. - * Return - * The id is returned or 0 in case the id could not be retrieved. - * - * u64 bpf_get_current_cgroup_id(void) - * Return - * A 64-bit integer containing the current cgroup id based - * on the cgroup within which the current task is running. - * - * void *bpf_get_local_storage(void *map, u64 flags) - * Description - * Get the pointer to the local storage area. - * The type and the size of the local storage is defined - * by the *map* argument. - * The *flags* meaning is specific for each map type, - * and has to be 0 for cgroup local storage. - * - * Depending on the BPF program type, a local storage area - * can be shared between multiple instances of the BPF program, - * running simultaneously. - * - * A user should care about the synchronization by himself. - * For example, by using the **BPF_STX_XADD** instruction to alter - * the shared data. - * Return - * A pointer to the local storage area. - * - * int bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags) - * Description - * Select a **SO_REUSEPORT** socket from a - * **BPF_MAP_TYPE_REUSEPORT_ARRAY** *map*. - * It checks the selected socket is matching the incoming - * request in the socket buffer. - * Return - * 0 on success, or a negative error in case of failure. - * - * u64 bpf_skb_ancestor_cgroup_id(struct sk_buff *skb, int ancestor_level) - * Description - * Return id of cgroup v2 that is ancestor of cgroup associated - * with the *skb* at the *ancestor_level*. The root cgroup is at - * *ancestor_level* zero and each step down the hierarchy - * increments the level. If *ancestor_level* == level of cgroup - * associated with *skb*, then return value will be same as that - * of **bpf_skb_cgroup_id**\ (). - * - * The helper is useful to implement policies based on cgroups - * that are upper in hierarchy than immediate cgroup associated - * with *skb*. - * - * The format of returned id and helper limitations are same as in - * **bpf_skb_cgroup_id**\ (). - * Return - * The id is returned or 0 in case the id could not be retrieved. - * - * struct bpf_sock *bpf_sk_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) - * Description - * Look for TCP socket matching *tuple*, optionally in a child - * network namespace *netns*. The return value must be checked, - * and if non-**NULL**, released via **bpf_sk_release**\ (). - * - * The *ctx* should point to the context of the program, such as - * the skb or socket (depending on the hook in use). This is used - * to determine the base network namespace for the lookup. - * - * *tuple_size* must be one of: - * - * **sizeof**\ (*tuple*\ **->ipv4**) - * Look for an IPv4 socket. - * **sizeof**\ (*tuple*\ **->ipv6**) - * Look for an IPv6 socket. - * - * If the *netns* is a negative signed 32-bit integer, then the - * socket lookup table in the netns associated with the *ctx* will - * will be used. For the TC hooks, this is the netns of the device - * in the skb. For socket hooks, this is the netns of the socket. - * If *netns* is any other signed 32-bit value greater than or - * equal to zero then it specifies the ID of the netns relative to - * the netns associated with the *ctx*. *netns* values beyond the - * range of 32-bit integers are reserved for future use. - * - * All values for *flags* are reserved for future usage, and must - * be left at zero. - * - * This helper is available only if the kernel was compiled with - * **CONFIG_NET** configuration option. - * Return - * Pointer to **struct bpf_sock**, or **NULL** in case of failure. - * For sockets with reuseport option, the **struct bpf_sock** - * result is from **reuse->socks**\ [] using the hash of the tuple. - * - * struct bpf_sock *bpf_sk_lookup_udp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) - * Description - * Look for UDP socket matching *tuple*, optionally in a child - * network namespace *netns*. The return value must be checked, - * and if non-**NULL**, released via **bpf_sk_release**\ (). - * - * The *ctx* should point to the context of the program, such as - * the skb or socket (depending on the hook in use). This is used - * to determine the base network namespace for the lookup. - * - * *tuple_size* must be one of: - * - * **sizeof**\ (*tuple*\ **->ipv4**) - * Look for an IPv4 socket. - * **sizeof**\ (*tuple*\ **->ipv6**) - * Look for an IPv6 socket. - * - * If the *netns* is a negative signed 32-bit integer, then the - * socket lookup table in the netns associated with the *ctx* will - * will be used. For the TC hooks, this is the netns of the device - * in the skb. For socket hooks, this is the netns of the socket. - * If *netns* is any other signed 32-bit value greater than or - * equal to zero then it specifies the ID of the netns relative to - * the netns associated with the *ctx*. *netns* values beyond the - * range of 32-bit integers are reserved for future use. - * - * All values for *flags* are reserved for future usage, and must - * be left at zero. - * - * This helper is available only if the kernel was compiled with - * **CONFIG_NET** configuration option. - * Return - * Pointer to **struct bpf_sock**, or **NULL** in case of failure. - * For sockets with reuseport option, the **struct bpf_sock** - * result is from **reuse->socks**\ [] using the hash of the tuple. - * - * int bpf_sk_release(struct bpf_sock *sock) - * Description - * Release the reference held by *sock*. *sock* must be a - * non-**NULL** pointer that was returned from - * **bpf_sk_lookup_xxx**\ (). - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_map_push_elem(struct bpf_map *map, const void *value, u64 flags) - * Description - * Push an element *value* in *map*. *flags* is one of: - * - * **BPF_EXIST** - * If the queue/stack is full, the oldest element is - * removed to make room for this. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_map_pop_elem(struct bpf_map *map, void *value) - * Description - * Pop an element from *map*. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_map_peek_elem(struct bpf_map *map, void *value) - * Description - * Get an element from *map* without removing it. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_msg_push_data(struct sk_buff *skb, u32 start, u32 len, u64 flags) - * Description - * For socket policies, insert *len* bytes into *msg* at offset - * *start*. - * - * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a - * *msg* it may want to insert metadata or options into the *msg*. - * This can later be read and used by any of the lower layer BPF - * hooks. - * - * This helper may fail if under memory pressure (a malloc - * fails) in these cases BPF programs will get an appropriate - * error and BPF programs will need to handle them. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_msg_pop_data(struct sk_msg_buff *msg, u32 start, u32 pop, u64 flags) - * Description - * Will remove *pop* bytes from a *msg* starting at byte *start*. - * This may result in **ENOMEM** errors under certain situations if - * an allocation and copy are required due to a full ring buffer. - * However, the helper will try to avoid doing the allocation - * if possible. Other errors can occur if input parameters are - * invalid either due to *start* byte not being valid part of *msg* - * payload and/or *pop* value being to large. - * Return - * 0 on success, or a negative error in case of failure. - * - * int bpf_rc_pointer_rel(void *ctx, s32 rel_x, s32 rel_y) - * Description - * This helper is used in programs implementing IR decoding, to - * report a successfully decoded pointer movement. - * - * The *ctx* should point to the lirc sample as passed into - * the program. - * - * This helper is only available is the kernel was compiled with - * the **CONFIG_BPF_LIRC_MODE2** configuration option set to - * "**y**". - * Return - * 0 - * - * int bpf_spin_lock(struct bpf_spin_lock *lock) - * Description - * Acquire a spinlock represented by the pointer *lock*, which is - * stored as part of a value of a map. Taking the lock allows to - * safely update the rest of the fields in that value. The - * spinlock can (and must) later be released with a call to - * **bpf_spin_unlock**\ (\ *lock*\ ). - * - * Spinlocks in BPF programs come with a number of restrictions - * and constraints: - * - * * **bpf_spin_lock** objects are only allowed inside maps of - * types **BPF_MAP_TYPE_HASH** and **BPF_MAP_TYPE_ARRAY** (this - * list could be extended in the future). - * * BTF description of the map is mandatory. - * * The BPF program can take ONE lock at a time, since taking two - * or more could cause dead locks. - * * Only one **struct bpf_spin_lock** is allowed per map element. - * * When the lock is taken, calls (either BPF to BPF or helpers) - * are not allowed. - * * The **BPF_LD_ABS** and **BPF_LD_IND** instructions are not - * allowed inside a spinlock-ed region. - * * The BPF program MUST call **bpf_spin_unlock**\ () to release - * the lock, on all execution paths, before it returns. - * * The BPF program can access **struct bpf_spin_lock** only via - * the **bpf_spin_lock**\ () and **bpf_spin_unlock**\ () - * helpers. Loading or storing data into the **struct - * bpf_spin_lock** *lock*\ **;** field of a map is not allowed. - * * To use the **bpf_spin_lock**\ () helper, the BTF description - * of the map value must be a struct and have **struct - * bpf_spin_lock** *anyname*\ **;** field at the top level. - * Nested lock inside another struct is not allowed. - * * The **struct bpf_spin_lock** *lock* field in a map value must - * be aligned on a multiple of 4 bytes in that value. - * * Syscall with command **BPF_MAP_LOOKUP_ELEM** does not copy - * the **bpf_spin_lock** field to user space. - * * Syscall with command **BPF_MAP_UPDATE_ELEM**, or update from - * a BPF program, do not update the **bpf_spin_lock** field. - * * **bpf_spin_lock** cannot be on the stack or inside a - * networking packet (it can only be inside of a map values). - * * **bpf_spin_lock** is available to root only. - * * Tracing programs and socket filter programs cannot use - * **bpf_spin_lock**\ () due to insufficient preemption checks - * (but this may change in the future). - * * **bpf_spin_lock** is not allowed in inner maps of map-in-map. - * Return - * 0 - * - * int bpf_spin_unlock(struct bpf_spin_lock *lock) - * Description - * Release the *lock* previously locked by a call to - * **bpf_spin_lock**\ (\ *lock*\ ). - * Return - * 0 - * - * struct bpf_sock *bpf_sk_fullsock(struct bpf_sock *sk) - * Description - * This helper gets a **struct bpf_sock** pointer such - * that all the fields in this **bpf_sock** can be accessed. - * Return - * A **struct bpf_sock** pointer on success, or **NULL** in - * case of failure. - * - * struct bpf_tcp_sock *bpf_tcp_sock(struct bpf_sock *sk) - * Description - * This helper gets a **struct bpf_tcp_sock** pointer from a - * **struct bpf_sock** pointer. - * Return - * A **struct bpf_tcp_sock** pointer on success, or **NULL** in - * case of failure. - * - * int bpf_skb_ecn_set_ce(struct sk_buf *skb) - * Description - * Set ECN (Explicit Congestion Notification) field of IP header - * to **CE** (Congestion Encountered) if current value is **ECT** - * (ECN Capable Transport). Otherwise, do nothing. Works with IPv6 - * and IPv4. - * Return - * 1 if the **CE** flag is set (either by the current helper call - * or because it was already present), 0 if it is not set. - * - * struct bpf_sock *bpf_get_listener_sock(struct bpf_sock *sk) - * Description - * Return a **struct bpf_sock** pointer in **TCP_LISTEN** state. - * **bpf_sk_release**\ () is unnecessary and not allowed. - * Return - * A **struct bpf_sock** pointer on success, or **NULL** in - * case of failure. - * - * struct bpf_sock *bpf_skc_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) - * Description - * Look for TCP socket matching *tuple*, optionally in a child - * network namespace *netns*. The return value must be checked, - * and if non-**NULL**, released via **bpf_sk_release**\ (). - * - * This function is identical to bpf_sk_lookup_tcp, except that it - * also returns timewait or request sockets. Use bpf_sk_fullsock - * or bpf_tcp_socket to access the full structure. - * - * This helper is available only if the kernel was compiled with - * **CONFIG_NET** configuration option. - * Return - * Pointer to **struct bpf_sock**, or **NULL** in case of failure. - * For sockets with reuseport option, the **struct bpf_sock** - * result is from **reuse->socks**\ [] using the hash of the tuple. - * - * int bpf_tcp_check_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) - * Description - * Check whether iph and th contain a valid SYN cookie ACK for - * the listening socket in sk. - * - * iph points to the start of the IPv4 or IPv6 header, while - * iph_len contains sizeof(struct iphdr) or sizeof(struct ip6hdr). - * - * th points to the start of the TCP header, while th_len contains - * sizeof(struct tcphdr). - * - * Return - * 0 if iph and th are a valid SYN cookie ACK, or a negative error - * otherwise. - */ -#define __BPF_FUNC_MAPPER(FN) \ - FN(unspec), \ - FN(map_lookup_elem), \ - FN(map_update_elem), \ - FN(map_delete_elem), \ - FN(probe_read), \ - FN(ktime_get_ns), \ - FN(trace_printk), \ - FN(get_prandom_u32), \ - FN(get_smp_processor_id), \ - FN(skb_store_bytes), \ - FN(l3_csum_replace), \ - FN(l4_csum_replace), \ - FN(tail_call), \ - FN(clone_redirect), \ - FN(get_current_pid_tgid), \ - FN(get_current_uid_gid), \ - FN(get_current_comm), \ - FN(get_cgroup_classid), \ - FN(skb_vlan_push), \ - FN(skb_vlan_pop), \ - FN(skb_get_tunnel_key), \ - FN(skb_set_tunnel_key), \ - FN(perf_event_read), \ - FN(redirect), \ - FN(get_route_realm), \ - FN(perf_event_output), \ - FN(skb_load_bytes), \ - FN(get_stackid), \ - FN(csum_diff), \ - FN(skb_get_tunnel_opt), \ - FN(skb_set_tunnel_opt), \ - FN(skb_change_proto), \ - FN(skb_change_type), \ - FN(skb_under_cgroup), \ - FN(get_hash_recalc), \ - FN(get_current_task), \ - FN(probe_write_user), \ - FN(current_task_under_cgroup), \ - FN(skb_change_tail), \ - FN(skb_pull_data), \ - FN(csum_update), \ - FN(set_hash_invalid), \ - FN(get_numa_node_id), \ - FN(skb_change_head), \ - FN(xdp_adjust_head), \ - FN(probe_read_str), \ - FN(get_socket_cookie), \ - FN(get_socket_uid), \ - FN(set_hash), \ - FN(setsockopt), \ - FN(skb_adjust_room), \ - FN(redirect_map), \ - FN(sk_redirect_map), \ - FN(sock_map_update), \ - FN(xdp_adjust_meta), \ - FN(perf_event_read_value), \ - FN(perf_prog_read_value), \ - FN(getsockopt), \ - FN(override_return), \ - FN(sock_ops_cb_flags_set), \ - FN(msg_redirect_map), \ - FN(msg_apply_bytes), \ - FN(msg_cork_bytes), \ - FN(msg_pull_data), \ - FN(bind), \ - FN(xdp_adjust_tail), \ - FN(skb_get_xfrm_state), \ - FN(get_stack), \ - FN(skb_load_bytes_relative), \ - FN(fib_lookup), \ - FN(sock_hash_update), \ - FN(msg_redirect_hash), \ - FN(sk_redirect_hash), \ - FN(lwt_push_encap), \ - FN(lwt_seg6_store_bytes), \ - FN(lwt_seg6_adjust_srh), \ - FN(lwt_seg6_action), \ - FN(rc_repeat), \ - FN(rc_keydown), \ - FN(skb_cgroup_id), \ - FN(get_current_cgroup_id), \ - FN(get_local_storage), \ - FN(sk_select_reuseport), \ - FN(skb_ancestor_cgroup_id), \ - FN(sk_lookup_tcp), \ - FN(sk_lookup_udp), \ - FN(sk_release), \ - FN(map_push_elem), \ - FN(map_pop_elem), \ - FN(map_peek_elem), \ - FN(msg_push_data), \ - FN(msg_pop_data), \ - FN(rc_pointer_rel), \ - FN(spin_lock), \ - FN(spin_unlock), \ - FN(sk_fullsock), \ - FN(tcp_sock), \ - FN(skb_ecn_set_ce), \ - FN(get_listener_sock), \ - FN(skc_lookup_tcp), \ - FN(tcp_check_syncookie), - -/* integer value in 'imm' field of BPF_CALL instruction selects which helper - * function eBPF program intends to call - */ -#define __BPF_ENUM_FN(x) BPF_FUNC_ ## x -enum bpf_func_id { - __BPF_FUNC_MAPPER(__BPF_ENUM_FN) - __BPF_FUNC_MAX_ID, -}; -#undef __BPF_ENUM_FN - -/* All flags used by eBPF helper functions, placed here. */ - -/* BPF_FUNC_skb_store_bytes flags. */ -#define BPF_F_RECOMPUTE_CSUM (1ULL << 0) -#define BPF_F_INVALIDATE_HASH (1ULL << 1) - -/* BPF_FUNC_l3_csum_replace and BPF_FUNC_l4_csum_replace flags. - * First 4 bits are for passing the header field size. - */ -#define BPF_F_HDR_FIELD_MASK 0xfULL - -/* BPF_FUNC_l4_csum_replace flags. */ -#define BPF_F_PSEUDO_HDR (1ULL << 4) -#define BPF_F_MARK_MANGLED_0 (1ULL << 5) -#define BPF_F_MARK_ENFORCE (1ULL << 6) - -/* BPF_FUNC_clone_redirect and BPF_FUNC_redirect flags. */ -#define BPF_F_INGRESS (1ULL << 0) - -/* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */ -#define BPF_F_TUNINFO_IPV6 (1ULL << 0) - -/* flags for both BPF_FUNC_get_stackid and BPF_FUNC_get_stack. */ -#define BPF_F_SKIP_FIELD_MASK 0xffULL -#define BPF_F_USER_STACK (1ULL << 8) -/* flags used by BPF_FUNC_get_stackid only. */ -#define BPF_F_FAST_STACK_CMP (1ULL << 9) -#define BPF_F_REUSE_STACKID (1ULL << 10) -/* flags used by BPF_FUNC_get_stack only. */ -#define BPF_F_USER_BUILD_ID (1ULL << 11) - -/* BPF_FUNC_skb_set_tunnel_key flags. */ -#define BPF_F_ZERO_CSUM_TX (1ULL << 1) -#define BPF_F_DONT_FRAGMENT (1ULL << 2) -#define BPF_F_SEQ_NUMBER (1ULL << 3) - -/* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and - * BPF_FUNC_perf_event_read_value flags. - */ -#define BPF_F_INDEX_MASK 0xffffffffULL -#define BPF_F_CURRENT_CPU BPF_F_INDEX_MASK -/* BPF_FUNC_perf_event_output for sk_buff input context. */ -#define BPF_F_CTXLEN_MASK (0xfffffULL << 32) - -/* Current network namespace */ -#define BPF_F_CURRENT_NETNS (-1L) - -/* BPF_FUNC_skb_adjust_room flags. */ -#define BPF_F_ADJ_ROOM_FIXED_GSO (1ULL << 0) - -#define BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 (1ULL << 1) -#define BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 (1ULL << 2) -#define BPF_F_ADJ_ROOM_ENCAP_L4_GRE (1ULL << 3) -#define BPF_F_ADJ_ROOM_ENCAP_L4_UDP (1ULL << 4) - -/* Mode for BPF_FUNC_skb_adjust_room helper. */ -enum bpf_adj_room_mode { - BPF_ADJ_ROOM_NET, - BPF_ADJ_ROOM_MAC, -}; - -/* Mode for BPF_FUNC_skb_load_bytes_relative helper. */ -enum bpf_hdr_start_off { - BPF_HDR_START_MAC, - BPF_HDR_START_NET, -}; - -/* Encapsulation type for BPF_FUNC_lwt_push_encap helper. */ -enum bpf_lwt_encap_mode { - BPF_LWT_ENCAP_SEG6, - BPF_LWT_ENCAP_SEG6_INLINE, - BPF_LWT_ENCAP_IP, -}; - -#define __bpf_md_ptr(type, name) \ -union { \ - type name; \ - __u64 :64; \ -} __attribute__((aligned(8))) - -/* user accessible mirror of in-kernel sk_buff. - * new fields can only be added to the end of this structure - */ -struct __sk_buff { - __u32 len; - __u32 pkt_type; - __u32 mark; - __u32 queue_mapping; - __u32 protocol; - __u32 vlan_present; - __u32 vlan_tci; - __u32 vlan_proto; - __u32 priority; - __u32 ingress_ifindex; - __u32 ifindex; - __u32 tc_index; - __u32 cb[5]; - __u32 hash; - __u32 tc_classid; - __u32 data; - __u32 data_end; - __u32 napi_id; - - /* Accessed by BPF_PROG_TYPE_sk_skb types from here to ... */ - __u32 family; - __u32 remote_ip4; /* Stored in network byte order */ - __u32 local_ip4; /* Stored in network byte order */ - __u32 remote_ip6[4]; /* Stored in network byte order */ - __u32 local_ip6[4]; /* Stored in network byte order */ - __u32 remote_port; /* Stored in network byte order */ - __u32 local_port; /* stored in host byte order */ - /* ... here. */ - - __u32 data_meta; - __bpf_md_ptr(struct bpf_flow_keys *, flow_keys); - __u64 tstamp; - __u32 wire_len; - __u32 gso_segs; - __bpf_md_ptr(struct bpf_sock *, sk); -}; - -struct bpf_tunnel_key { - __u32 tunnel_id; - union { - __u32 remote_ipv4; - __u32 remote_ipv6[4]; - }; - __u8 tunnel_tos; - __u8 tunnel_ttl; - __u16 tunnel_ext; /* Padding, future use. */ - __u32 tunnel_label; -}; - -/* user accessible mirror of in-kernel xfrm_state. - * new fields can only be added to the end of this structure - */ -struct bpf_xfrm_state { - __u32 reqid; - __u32 spi; /* Stored in network byte order */ - __u16 family; - __u16 ext; /* Padding, future use. */ - union { - __u32 remote_ipv4; /* Stored in network byte order */ - __u32 remote_ipv6[4]; /* Stored in network byte order */ - }; -}; - -/* Generic BPF return codes which all BPF program types may support. - * The values are binary compatible with their TC_ACT_* counter-part to - * provide backwards compatibility with existing SCHED_CLS and SCHED_ACT - * programs. - * - * XDP is handled seprately, see XDP_*. - */ -enum bpf_ret_code { - BPF_OK = 0, - /* 1 reserved */ - BPF_DROP = 2, - /* 3-6 reserved */ - BPF_REDIRECT = 7, - /* >127 are reserved for prog type specific return codes. - * - * BPF_LWT_REROUTE: used by BPF_PROG_TYPE_LWT_IN and - * BPF_PROG_TYPE_LWT_XMIT to indicate that skb had been - * changed and should be routed based on its new L3 header. - * (This is an L3 redirect, as opposed to L2 redirect - * represented by BPF_REDIRECT above). - */ - BPF_LWT_REROUTE = 128, -}; - -struct bpf_sock { - __u32 bound_dev_if; - __u32 family; - __u32 type; - __u32 protocol; - __u32 mark; - __u32 priority; - /* IP address also allows 1 and 2 bytes access */ - __u32 src_ip4; - __u32 src_ip6[4]; - __u32 src_port; /* host byte order */ - __u32 dst_port; /* network byte order */ - __u32 dst_ip4; - __u32 dst_ip6[4]; - __u32 state; -}; - -struct bpf_tcp_sock { - __u32 snd_cwnd; /* Sending congestion window */ - __u32 srtt_us; /* smoothed round trip time << 3 in usecs */ - __u32 rtt_min; - __u32 snd_ssthresh; /* Slow start size threshold */ - __u32 rcv_nxt; /* What we want to receive next */ - __u32 snd_nxt; /* Next sequence we send */ - __u32 snd_una; /* First byte we want an ack for */ - __u32 mss_cache; /* Cached effective mss, not including SACKS */ - __u32 ecn_flags; /* ECN status bits. */ - __u32 rate_delivered; /* saved rate sample: packets delivered */ - __u32 rate_interval_us; /* saved rate sample: time elapsed */ - __u32 packets_out; /* Packets which are "in flight" */ - __u32 retrans_out; /* Retransmitted packets out */ - __u32 total_retrans; /* Total retransmits for entire connection */ - __u32 segs_in; /* RFC4898 tcpEStatsPerfSegsIn - * total number of segments in. - */ - __u32 data_segs_in; /* RFC4898 tcpEStatsPerfDataSegsIn - * total number of data segments in. - */ - __u32 segs_out; /* RFC4898 tcpEStatsPerfSegsOut - * The total number of segments sent. - */ - __u32 data_segs_out; /* RFC4898 tcpEStatsPerfDataSegsOut - * total number of data segments sent. - */ - __u32 lost_out; /* Lost packets */ - __u32 sacked_out; /* SACK'd packets */ - __u64 bytes_received; /* RFC4898 tcpEStatsAppHCThruOctetsReceived - * sum(delta(rcv_nxt)), or how many bytes - * were acked. - */ - __u64 bytes_acked; /* RFC4898 tcpEStatsAppHCThruOctetsAcked - * sum(delta(snd_una)), or how many bytes - * were acked. - */ -}; - -struct bpf_sock_tuple { - union { - struct { - __be32 saddr; - __be32 daddr; - __be16 sport; - __be16 dport; - } ipv4; - struct { - __be32 saddr[4]; - __be32 daddr[4]; - __be16 sport; - __be16 dport; - } ipv6; - }; -}; - -#define XDP_PACKET_HEADROOM 256 - -/* User return codes for XDP prog type. - * A valid XDP program must return one of these defined values. All other - * return codes are reserved for future use. Unknown return codes will - * result in packet drops and a warning via bpf_warn_invalid_xdp_action(). - */ -enum xdp_action { - XDP_ABORTED = 0, - XDP_DROP, - XDP_PASS, - XDP_TX, - XDP_REDIRECT, -}; - -/* user accessible metadata for XDP packet hook - * new fields must be added to the end of this structure - */ -struct xdp_md { - __u32 data; - __u32 data_end; - __u32 data_meta; - /* Below access go through struct xdp_rxq_info */ - __u32 ingress_ifindex; /* rxq->dev->ifindex */ - __u32 rx_queue_index; /* rxq->queue_index */ -}; - -enum sk_action { - SK_DROP = 0, - SK_PASS, -}; - -/* user accessible metadata for SK_MSG packet hook, new fields must - * be added to the end of this structure - */ -struct sk_msg_md { - __bpf_md_ptr(void *, data); - __bpf_md_ptr(void *, data_end); - - __u32 family; - __u32 remote_ip4; /* Stored in network byte order */ - __u32 local_ip4; /* Stored in network byte order */ - __u32 remote_ip6[4]; /* Stored in network byte order */ - __u32 local_ip6[4]; /* Stored in network byte order */ - __u32 remote_port; /* Stored in network byte order */ - __u32 local_port; /* stored in host byte order */ - __u32 size; /* Total size of sk_msg */ -}; - -struct sk_reuseport_md { - /* - * Start of directly accessible data. It begins from - * the tcp/udp header. - */ - __bpf_md_ptr(void *, data); - /* End of directly accessible data */ - __bpf_md_ptr(void *, data_end); - /* - * Total length of packet (starting from the tcp/udp header). - * Note that the directly accessible bytes (data_end - data) - * could be less than this "len". Those bytes could be - * indirectly read by a helper "bpf_skb_load_bytes()". - */ - __u32 len; - /* - * Eth protocol in the mac header (network byte order). e.g. - * ETH_P_IP(0x0800) and ETH_P_IPV6(0x86DD) - */ - __u32 eth_protocol; - __u32 ip_protocol; /* IP protocol. e.g. IPPROTO_TCP, IPPROTO_UDP */ - __u32 bind_inany; /* Is sock bound to an INANY address? */ - __u32 hash; /* A hash of the packet 4 tuples */ -}; - -#define BPF_TAG_SIZE 8 - -struct bpf_prog_info { - __u32 type; - __u32 id; - __u8 tag[BPF_TAG_SIZE]; - __u32 jited_prog_len; - __u32 xlated_prog_len; - __aligned_u64 jited_prog_insns; - __aligned_u64 xlated_prog_insns; - __u64 load_time; /* ns since boottime */ - __u32 created_by_uid; - __u32 nr_map_ids; - __aligned_u64 map_ids; - char name[BPF_OBJ_NAME_LEN]; - __u32 ifindex; - __u32 gpl_compatible:1; - __u64 netns_dev; - __u64 netns_ino; - __u32 nr_jited_ksyms; - __u32 nr_jited_func_lens; - __aligned_u64 jited_ksyms; - __aligned_u64 jited_func_lens; - __u32 btf_id; - __u32 func_info_rec_size; - __aligned_u64 func_info; - __u32 nr_func_info; - __u32 nr_line_info; - __aligned_u64 line_info; - __aligned_u64 jited_line_info; - __u32 nr_jited_line_info; - __u32 line_info_rec_size; - __u32 jited_line_info_rec_size; - __u32 nr_prog_tags; - __aligned_u64 prog_tags; - __u64 run_time_ns; - __u64 run_cnt; -} __attribute__((aligned(8))); - -struct bpf_map_info { - __u32 type; - __u32 id; - __u32 key_size; - __u32 value_size; - __u32 max_entries; - __u32 map_flags; - char name[BPF_OBJ_NAME_LEN]; - __u32 ifindex; - __u32 :32; - __u64 netns_dev; - __u64 netns_ino; - __u32 btf_id; - __u32 btf_key_type_id; - __u32 btf_value_type_id; -} __attribute__((aligned(8))); - -struct bpf_btf_info { - __aligned_u64 btf; - __u32 btf_size; - __u32 id; -} __attribute__((aligned(8))); - -/* User bpf_sock_addr struct to access socket fields and sockaddr struct passed - * by user and intended to be used by socket (e.g. to bind to, depends on - * attach attach type). - */ -struct bpf_sock_addr { - __u32 user_family; /* Allows 4-byte read, but no write. */ - __u32 user_ip4; /* Allows 1,2,4-byte read and 4-byte write. - * Stored in network byte order. - */ - __u32 user_ip6[4]; /* Allows 1,2,4-byte read an 4-byte write. - * Stored in network byte order. - */ - __u32 user_port; /* Allows 4-byte read and write. - * Stored in network byte order - */ - __u32 family; /* Allows 4-byte read, but no write */ - __u32 type; /* Allows 4-byte read, but no write */ - __u32 protocol; /* Allows 4-byte read, but no write */ - __u32 msg_src_ip4; /* Allows 1,2,4-byte read an 4-byte write. - * Stored in network byte order. - */ - __u32 msg_src_ip6[4]; /* Allows 1,2,4-byte read an 4-byte write. - * Stored in network byte order. - */ -}; - -/* User bpf_sock_ops struct to access socket values and specify request ops - * and their replies. - * Some of this fields are in network (bigendian) byte order and may need - * to be converted before use (bpf_ntohl() defined in samples/bpf/bpf_endian.h). - * New fields can only be added at the end of this structure - */ -struct bpf_sock_ops { - __u32 op; - union { - __u32 args[4]; /* Optionally passed to bpf program */ - __u32 reply; /* Returned by bpf program */ - __u32 replylong[4]; /* Optionally returned by bpf prog */ - }; - __u32 family; - __u32 remote_ip4; /* Stored in network byte order */ - __u32 local_ip4; /* Stored in network byte order */ - __u32 remote_ip6[4]; /* Stored in network byte order */ - __u32 local_ip6[4]; /* Stored in network byte order */ - __u32 remote_port; /* Stored in network byte order */ - __u32 local_port; /* stored in host byte order */ - __u32 is_fullsock; /* Some TCP fields are only valid if - * there is a full socket. If not, the - * fields read as zero. - */ - __u32 snd_cwnd; - __u32 srtt_us; /* Averaged RTT << 3 in usecs */ - __u32 bpf_sock_ops_cb_flags; /* flags defined in uapi/linux/tcp.h */ - __u32 state; - __u32 rtt_min; - __u32 snd_ssthresh; - __u32 rcv_nxt; - __u32 snd_nxt; - __u32 snd_una; - __u32 mss_cache; - __u32 ecn_flags; - __u32 rate_delivered; - __u32 rate_interval_us; - __u32 packets_out; - __u32 retrans_out; - __u32 total_retrans; - __u32 segs_in; - __u32 data_segs_in; - __u32 segs_out; - __u32 data_segs_out; - __u32 lost_out; - __u32 sacked_out; - __u32 sk_txhash; - __u64 bytes_received; - __u64 bytes_acked; -}; - -/* Definitions for bpf_sock_ops_cb_flags */ -#define BPF_SOCK_OPS_RTO_CB_FLAG (1<<0) -#define BPF_SOCK_OPS_RETRANS_CB_FLAG (1<<1) -#define BPF_SOCK_OPS_STATE_CB_FLAG (1<<2) -#define BPF_SOCK_OPS_ALL_CB_FLAGS 0x7 /* Mask of all currently - * supported cb flags - */ - -/* List of known BPF sock_ops operators. - * New entries can only be added at the end - */ -enum { - BPF_SOCK_OPS_VOID, - BPF_SOCK_OPS_TIMEOUT_INIT, /* Should return SYN-RTO value to use or - * -1 if default value should be used - */ - BPF_SOCK_OPS_RWND_INIT, /* Should return initial advertized - * window (in packets) or -1 if default - * value should be used - */ - BPF_SOCK_OPS_TCP_CONNECT_CB, /* Calls BPF program right before an - * active connection is initialized - */ - BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB, /* Calls BPF program when an - * active connection is - * established - */ - BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB, /* Calls BPF program when a - * passive connection is - * established - */ - BPF_SOCK_OPS_NEEDS_ECN, /* If connection's congestion control - * needs ECN - */ - BPF_SOCK_OPS_BASE_RTT, /* Get base RTT. The correct value is - * based on the path and may be - * dependent on the congestion control - * algorithm. In general it indicates - * a congestion threshold. RTTs above - * this indicate congestion - */ - BPF_SOCK_OPS_RTO_CB, /* Called when an RTO has triggered. - * Arg1: value of icsk_retransmits - * Arg2: value of icsk_rto - * Arg3: whether RTO has expired - */ - BPF_SOCK_OPS_RETRANS_CB, /* Called when skb is retransmitted. - * Arg1: sequence number of 1st byte - * Arg2: # segments - * Arg3: return value of - * tcp_transmit_skb (0 => success) - */ - BPF_SOCK_OPS_STATE_CB, /* Called when TCP changes state. - * Arg1: old_state - * Arg2: new_state - */ - BPF_SOCK_OPS_TCP_LISTEN_CB, /* Called on listen(2), right after - * socket transition to LISTEN state. - */ -}; - -/* List of TCP states. There is a build check in net/ipv4/tcp.c to detect - * changes between the TCP and BPF versions. Ideally this should never happen. - * If it does, we need to add code to convert them before calling - * the BPF sock_ops function. - */ -enum { - BPF_TCP_ESTABLISHED = 1, - BPF_TCP_SYN_SENT, - BPF_TCP_SYN_RECV, - BPF_TCP_FIN_WAIT1, - BPF_TCP_FIN_WAIT2, - BPF_TCP_TIME_WAIT, - BPF_TCP_CLOSE, - BPF_TCP_CLOSE_WAIT, - BPF_TCP_LAST_ACK, - BPF_TCP_LISTEN, - BPF_TCP_CLOSING, /* Now a valid state */ - BPF_TCP_NEW_SYN_RECV, - - BPF_TCP_MAX_STATES /* Leave at the end! */ -}; - -#define TCP_BPF_IW 1001 /* Set TCP initial congestion window */ -#define TCP_BPF_SNDCWND_CLAMP 1002 /* Set sndcwnd_clamp */ - -struct bpf_perf_event_value { - __u64 counter; - __u64 enabled; - __u64 running; -}; - -#define BPF_DEVCG_ACC_MKNOD (1ULL << 0) -#define BPF_DEVCG_ACC_READ (1ULL << 1) -#define BPF_DEVCG_ACC_WRITE (1ULL << 2) - -#define BPF_DEVCG_DEV_BLOCK (1ULL << 0) -#define BPF_DEVCG_DEV_CHAR (1ULL << 1) - -struct bpf_cgroup_dev_ctx { - /* access_type encoded as (BPF_DEVCG_ACC_* << 16) | BPF_DEVCG_DEV_* */ - __u32 access_type; - __u32 major; - __u32 minor; -}; - -struct bpf_raw_tracepoint_args { - __u64 args[0]; -}; - -/* DIRECT: Skip the FIB rules and go to FIB table associated with device - * OUTPUT: Do lookup from egress perspective; default is ingress - */ -#define BPF_FIB_LOOKUP_DIRECT BIT(0) -#define BPF_FIB_LOOKUP_OUTPUT BIT(1) - -enum { - BPF_FIB_LKUP_RET_SUCCESS, /* lookup successful */ - BPF_FIB_LKUP_RET_BLACKHOLE, /* dest is blackholed; can be dropped */ - BPF_FIB_LKUP_RET_UNREACHABLE, /* dest is unreachable; can be dropped */ - BPF_FIB_LKUP_RET_PROHIBIT, /* dest not allowed; can be dropped */ - BPF_FIB_LKUP_RET_NOT_FWDED, /* packet is not forwarded */ - BPF_FIB_LKUP_RET_FWD_DISABLED, /* fwding is not enabled on ingress */ - BPF_FIB_LKUP_RET_UNSUPP_LWT, /* fwd requires encapsulation */ - BPF_FIB_LKUP_RET_NO_NEIGH, /* no neighbor entry for nh */ - BPF_FIB_LKUP_RET_FRAG_NEEDED, /* fragmentation required to fwd */ -}; - -struct bpf_fib_lookup { - /* input: network family for lookup (AF_INET, AF_INET6) - * output: network family of egress nexthop - */ - __u8 family; - - /* set if lookup is to consider L4 data - e.g., FIB rules */ - __u8 l4_protocol; - __be16 sport; - __be16 dport; - - /* total length of packet from network header - used for MTU check */ - __u16 tot_len; - - /* input: L3 device index for lookup - * output: device index from FIB lookup - */ - __u32 ifindex; - - union { - /* inputs to lookup */ - __u8 tos; /* AF_INET */ - __be32 flowinfo; /* AF_INET6, flow_label + priority */ - - /* output: metric of fib result (IPv4/IPv6 only) */ - __u32 rt_metric; - }; - - union { - __be32 ipv4_src; - __u32 ipv6_src[4]; /* in6_addr; network order */ - }; - - /* input to bpf_fib_lookup, ipv{4,6}_dst is destination address in - * network header. output: bpf_fib_lookup sets to gateway address - * if FIB lookup returns gateway route - */ - union { - __be32 ipv4_dst; - __u32 ipv6_dst[4]; /* in6_addr; network order */ - }; - - /* output */ - __be16 h_vlan_proto; - __be16 h_vlan_TCI; - __u8 smac[6]; /* ETH_ALEN */ - __u8 dmac[6]; /* ETH_ALEN */ -}; - -enum bpf_task_fd_type { - BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */ - BPF_FD_TYPE_TRACEPOINT, /* tp name */ - BPF_FD_TYPE_KPROBE, /* (symbol + offset) or addr */ - BPF_FD_TYPE_KRETPROBE, /* (symbol + offset) or addr */ - BPF_FD_TYPE_UPROBE, /* filename + offset */ - BPF_FD_TYPE_URETPROBE, /* filename + offset */ -}; - -struct bpf_flow_keys { - __u16 nhoff; - __u16 thoff; - __u16 addr_proto; /* ETH_P_* of valid addrs */ - __u8 is_frag; - __u8 is_first_frag; - __u8 is_encap; - __u8 ip_proto; - __be16 n_proto; - __be16 sport; - __be16 dport; - union { - struct { - __be32 ipv4_src; - __be32 ipv4_dst; - }; - struct { - __u32 ipv6_src[4]; /* in6_addr; network order */ - __u32 ipv6_dst[4]; /* in6_addr; network order */ - }; - }; -}; - -struct bpf_func_info { - __u32 insn_off; - __u32 type_id; -}; - -#define BPF_LINE_INFO_LINE_NUM(line_col) ((line_col) >> 10) -#define BPF_LINE_INFO_LINE_COL(line_col) ((line_col) & 0x3ff) - -struct bpf_line_info { - __u32 insn_off; - __u32 file_name_off; - __u32 line_off; - __u32 line_col; -}; - -struct bpf_spin_lock { - __u32 val; -}; -#endif /* _UAPI__LINUX_BPF_H__ */ diff --git a/src/xdp/include/linux/err.h b/src/xdp/include/linux/err.h deleted file mode 100644 index a3db4cf5e..000000000 --- a/src/xdp/include/linux/err.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */ - -#ifndef __LINUX_ERR_H -#define __LINUX_ERR_H - -#include <linux/types.h> -#include <asm/errno.h> - -#define MAX_ERRNO 4095 - -#define IS_ERR_VALUE(x) ((x) >= (unsigned long)-MAX_ERRNO) - -static inline void * ERR_PTR(long error_) -{ - return (void *) error_; -} - -static inline long PTR_ERR(const void *ptr) -{ - return (long) ptr; -} - -static inline bool IS_ERR(const void *ptr) -{ - return IS_ERR_VALUE((unsigned long)ptr); -} - -static inline bool IS_ERR_OR_NULL(const void *ptr) -{ - return (!ptr) || IS_ERR_VALUE((unsigned long)ptr); -} - -#endif diff --git a/src/xdp/include/linux/if_link.h b/src/xdp/include/linux/if_link.h deleted file mode 100644 index 5b225ff63..000000000 --- a/src/xdp/include/linux/if_link.h +++ /dev/null @@ -1,1025 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _UAPI_LINUX_IF_LINK_H -#define _UAPI_LINUX_IF_LINK_H - -#include <linux/types.h> -#include <linux/netlink.h> - -/* This struct should be in sync with struct rtnl_link_stats64 */ -struct rtnl_link_stats { - __u32 rx_packets; /* total packets received */ - __u32 tx_packets; /* total packets transmitted */ - __u32 rx_bytes; /* total bytes received */ - __u32 tx_bytes; /* total bytes transmitted */ - __u32 rx_errors; /* bad packets received */ - __u32 tx_errors; /* packet transmit problems */ - __u32 rx_dropped; /* no space in linux buffers */ - __u32 tx_dropped; /* no space available in linux */ - __u32 multicast; /* multicast packets received */ - __u32 collisions; - - /* detailed rx_errors: */ - __u32 rx_length_errors; - __u32 rx_over_errors; /* receiver ring buff overflow */ - __u32 rx_crc_errors; /* recved pkt with crc error */ - __u32 rx_frame_errors; /* recv'd frame alignment error */ - __u32 rx_fifo_errors; /* recv'r fifo overrun */ - __u32 rx_missed_errors; /* receiver missed packet */ - - /* detailed tx_errors */ - __u32 tx_aborted_errors; - __u32 tx_carrier_errors; - __u32 tx_fifo_errors; - __u32 tx_heartbeat_errors; - __u32 tx_window_errors; - - /* for cslip etc */ - __u32 rx_compressed; - __u32 tx_compressed; - - __u32 rx_nohandler; /* dropped, no handler found */ -}; - -/* The main device statistics structure */ -struct rtnl_link_stats64 { - __u64 rx_packets; /* total packets received */ - __u64 tx_packets; /* total packets transmitted */ - __u64 rx_bytes; /* total bytes received */ - __u64 tx_bytes; /* total bytes transmitted */ - __u64 rx_errors; /* bad packets received */ - __u64 tx_errors; /* packet transmit problems */ - __u64 rx_dropped; /* no space in linux buffers */ - __u64 tx_dropped; /* no space available in linux */ - __u64 multicast; /* multicast packets received */ - __u64 collisions; - - /* detailed rx_errors: */ - __u64 rx_length_errors; - __u64 rx_over_errors; /* receiver ring buff overflow */ - __u64 rx_crc_errors; /* recved pkt with crc error */ - __u64 rx_frame_errors; /* recv'd frame alignment error */ - __u64 rx_fifo_errors; /* recv'r fifo overrun */ - __u64 rx_missed_errors; /* receiver missed packet */ - - /* detailed tx_errors */ - __u64 tx_aborted_errors; - __u64 tx_carrier_errors; - __u64 tx_fifo_errors; - __u64 tx_heartbeat_errors; - __u64 tx_window_errors; - - /* for cslip etc */ - __u64 rx_compressed; - __u64 tx_compressed; - - __u64 rx_nohandler; /* dropped, no handler found */ -}; - -/* The struct should be in sync with struct ifmap */ -struct rtnl_link_ifmap { - __u64 mem_start; - __u64 mem_end; - __u64 base_addr; - __u16 irq; - __u8 dma; - __u8 port; -}; - -/* - * IFLA_AF_SPEC - * Contains nested attributes for address family specific attributes. - * Each address family may create a attribute with the address family - * number as type and create its own attribute structure in it. - * - * Example: - * [IFLA_AF_SPEC] = { - * [AF_INET] = { - * [IFLA_INET_CONF] = ..., - * }, - * [AF_INET6] = { - * [IFLA_INET6_FLAGS] = ..., - * [IFLA_INET6_CONF] = ..., - * } - * } - */ - -enum { - IFLA_UNSPEC, - IFLA_ADDRESS, - IFLA_BROADCAST, - IFLA_IFNAME, - IFLA_MTU, - IFLA_LINK, - IFLA_QDISC, - IFLA_STATS, - IFLA_COST, -#define IFLA_COST IFLA_COST - IFLA_PRIORITY, -#define IFLA_PRIORITY IFLA_PRIORITY - IFLA_MASTER, -#define IFLA_MASTER IFLA_MASTER - IFLA_WIRELESS, /* Wireless Extension event - see wireless.h */ -#define IFLA_WIRELESS IFLA_WIRELESS - IFLA_PROTINFO, /* Protocol specific information for a link */ -#define IFLA_PROTINFO IFLA_PROTINFO - IFLA_TXQLEN, -#define IFLA_TXQLEN IFLA_TXQLEN - IFLA_MAP, -#define IFLA_MAP IFLA_MAP - IFLA_WEIGHT, -#define IFLA_WEIGHT IFLA_WEIGHT - IFLA_OPERSTATE, - IFLA_LINKMODE, - IFLA_LINKINFO, -#define IFLA_LINKINFO IFLA_LINKINFO - IFLA_NET_NS_PID, - IFLA_IFALIAS, - IFLA_NUM_VF, /* Number of VFs if device is SR-IOV PF */ - IFLA_VFINFO_LIST, - IFLA_STATS64, - IFLA_VF_PORTS, - IFLA_PORT_SELF, - IFLA_AF_SPEC, - IFLA_GROUP, /* Group the device belongs to */ - IFLA_NET_NS_FD, - IFLA_EXT_MASK, /* Extended info mask, VFs, etc */ - IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */ -#define IFLA_PROMISCUITY IFLA_PROMISCUITY - IFLA_NUM_TX_QUEUES, - IFLA_NUM_RX_QUEUES, - IFLA_CARRIER, - IFLA_PHYS_PORT_ID, - IFLA_CARRIER_CHANGES, - IFLA_PHYS_SWITCH_ID, - IFLA_LINK_NETNSID, - IFLA_PHYS_PORT_NAME, - IFLA_PROTO_DOWN, - IFLA_GSO_MAX_SEGS, - IFLA_GSO_MAX_SIZE, - IFLA_PAD, - IFLA_XDP, - IFLA_EVENT, - IFLA_NEW_NETNSID, - IFLA_IF_NETNSID, - IFLA_TARGET_NETNSID = IFLA_IF_NETNSID, /* new alias */ - IFLA_CARRIER_UP_COUNT, - IFLA_CARRIER_DOWN_COUNT, - IFLA_NEW_IFINDEX, - IFLA_MIN_MTU, - IFLA_MAX_MTU, - __IFLA_MAX -}; - - -#define IFLA_MAX (__IFLA_MAX - 1) - -/* backwards compatibility for userspace */ -#ifndef __KERNEL__ -#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg)))) -#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg)) -#endif - -enum { - IFLA_INET_UNSPEC, - IFLA_INET_CONF, - __IFLA_INET_MAX, -}; - -#define IFLA_INET_MAX (__IFLA_INET_MAX - 1) - -/* ifi_flags. - - IFF_* flags. - - The only change is: - IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are - more not changeable by user. They describe link media - characteristics and set by device driver. - - Comments: - - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid - - If neither of these three flags are set; - the interface is NBMA. - - - IFF_MULTICAST does not mean anything special: - multicasts can be used on all not-NBMA links. - IFF_MULTICAST means that this media uses special encapsulation - for multicast frames. Apparently, all IFF_POINTOPOINT and - IFF_BROADCAST devices are able to use multicasts too. - */ - -/* IFLA_LINK. - For usual devices it is equal ifi_index. - If it is a "virtual interface" (f.e. tunnel), ifi_link - can point to real physical interface (f.e. for bandwidth calculations), - or maybe 0, what means, that real media is unknown (usual - for IPIP tunnels, when route to endpoint is allowed to change) - */ - -/* Subtype attributes for IFLA_PROTINFO */ -enum { - IFLA_INET6_UNSPEC, - IFLA_INET6_FLAGS, /* link flags */ - IFLA_INET6_CONF, /* sysctl parameters */ - IFLA_INET6_STATS, /* statistics */ - IFLA_INET6_MCAST, /* MC things. What of them? */ - IFLA_INET6_CACHEINFO, /* time values and max reasm size */ - IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */ - IFLA_INET6_TOKEN, /* device token */ - IFLA_INET6_ADDR_GEN_MODE, /* implicit address generator mode */ - __IFLA_INET6_MAX -}; - -#define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1) - -enum in6_addr_gen_mode { - IN6_ADDR_GEN_MODE_EUI64, - IN6_ADDR_GEN_MODE_NONE, - IN6_ADDR_GEN_MODE_STABLE_PRIVACY, - IN6_ADDR_GEN_MODE_RANDOM, -}; - -/* Bridge section */ - -enum { - IFLA_BR_UNSPEC, - IFLA_BR_FORWARD_DELAY, - IFLA_BR_HELLO_TIME, - IFLA_BR_MAX_AGE, - IFLA_BR_AGEING_TIME, - IFLA_BR_STP_STATE, - IFLA_BR_PRIORITY, - IFLA_BR_VLAN_FILTERING, - IFLA_BR_VLAN_PROTOCOL, - IFLA_BR_GROUP_FWD_MASK, - IFLA_BR_ROOT_ID, - IFLA_BR_BRIDGE_ID, - IFLA_BR_ROOT_PORT, - IFLA_BR_ROOT_PATH_COST, - IFLA_BR_TOPOLOGY_CHANGE, - IFLA_BR_TOPOLOGY_CHANGE_DETECTED, - IFLA_BR_HELLO_TIMER, - IFLA_BR_TCN_TIMER, - IFLA_BR_TOPOLOGY_CHANGE_TIMER, - IFLA_BR_GC_TIMER, - IFLA_BR_GROUP_ADDR, - IFLA_BR_FDB_FLUSH, - IFLA_BR_MCAST_ROUTER, - IFLA_BR_MCAST_SNOOPING, - IFLA_BR_MCAST_QUERY_USE_IFADDR, - IFLA_BR_MCAST_QUERIER, - IFLA_BR_MCAST_HASH_ELASTICITY, - IFLA_BR_MCAST_HASH_MAX, - IFLA_BR_MCAST_LAST_MEMBER_CNT, - IFLA_BR_MCAST_STARTUP_QUERY_CNT, - IFLA_BR_MCAST_LAST_MEMBER_INTVL, - IFLA_BR_MCAST_MEMBERSHIP_INTVL, - IFLA_BR_MCAST_QUERIER_INTVL, - IFLA_BR_MCAST_QUERY_INTVL, - IFLA_BR_MCAST_QUERY_RESPONSE_INTVL, - IFLA_BR_MCAST_STARTUP_QUERY_INTVL, - IFLA_BR_NF_CALL_IPTABLES, - IFLA_BR_NF_CALL_IP6TABLES, - IFLA_BR_NF_CALL_ARPTABLES, - IFLA_BR_VLAN_DEFAULT_PVID, - IFLA_BR_PAD, - IFLA_BR_VLAN_STATS_ENABLED, - IFLA_BR_MCAST_STATS_ENABLED, - IFLA_BR_MCAST_IGMP_VERSION, - IFLA_BR_MCAST_MLD_VERSION, - IFLA_BR_VLAN_STATS_PER_PORT, - IFLA_BR_MULTI_BOOLOPT, - __IFLA_BR_MAX, -}; - -#define IFLA_BR_MAX (__IFLA_BR_MAX - 1) - -struct ifla_bridge_id { - __u8 prio[2]; - __u8 addr[6]; /* ETH_ALEN */ -}; - -enum { - BRIDGE_MODE_UNSPEC, - BRIDGE_MODE_HAIRPIN, -}; - -enum { - IFLA_BRPORT_UNSPEC, - IFLA_BRPORT_STATE, /* Spanning tree state */ - IFLA_BRPORT_PRIORITY, /* " priority */ - IFLA_BRPORT_COST, /* " cost */ - IFLA_BRPORT_MODE, /* mode (hairpin) */ - IFLA_BRPORT_GUARD, /* bpdu guard */ - IFLA_BRPORT_PROTECT, /* root port protection */ - IFLA_BRPORT_FAST_LEAVE, /* multicast fast leave */ - IFLA_BRPORT_LEARNING, /* mac learning */ - IFLA_BRPORT_UNICAST_FLOOD, /* flood unicast traffic */ - IFLA_BRPORT_PROXYARP, /* proxy ARP */ - IFLA_BRPORT_LEARNING_SYNC, /* mac learning sync from device */ - IFLA_BRPORT_PROXYARP_WIFI, /* proxy ARP for Wi-Fi */ - IFLA_BRPORT_ROOT_ID, /* designated root */ - IFLA_BRPORT_BRIDGE_ID, /* designated bridge */ - IFLA_BRPORT_DESIGNATED_PORT, - IFLA_BRPORT_DESIGNATED_COST, - IFLA_BRPORT_ID, - IFLA_BRPORT_NO, - IFLA_BRPORT_TOPOLOGY_CHANGE_ACK, - IFLA_BRPORT_CONFIG_PENDING, - IFLA_BRPORT_MESSAGE_AGE_TIMER, - IFLA_BRPORT_FORWARD_DELAY_TIMER, - IFLA_BRPORT_HOLD_TIMER, - IFLA_BRPORT_FLUSH, - IFLA_BRPORT_MULTICAST_ROUTER, - IFLA_BRPORT_PAD, - IFLA_BRPORT_MCAST_FLOOD, - IFLA_BRPORT_MCAST_TO_UCAST, - IFLA_BRPORT_VLAN_TUNNEL, - IFLA_BRPORT_BCAST_FLOOD, - IFLA_BRPORT_GROUP_FWD_MASK, - IFLA_BRPORT_NEIGH_SUPPRESS, - IFLA_BRPORT_ISOLATED, - IFLA_BRPORT_BACKUP_PORT, - __IFLA_BRPORT_MAX -}; -#define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) - -struct ifla_cacheinfo { - __u32 max_reasm_len; - __u32 tstamp; /* ipv6InterfaceTable updated timestamp */ - __u32 reachable_time; - __u32 retrans_time; -}; - -enum { - IFLA_INFO_UNSPEC, - IFLA_INFO_KIND, - IFLA_INFO_DATA, - IFLA_INFO_XSTATS, - IFLA_INFO_SLAVE_KIND, - IFLA_INFO_SLAVE_DATA, - __IFLA_INFO_MAX, -}; - -#define IFLA_INFO_MAX (__IFLA_INFO_MAX - 1) - -/* VLAN section */ - -enum { - IFLA_VLAN_UNSPEC, - IFLA_VLAN_ID, - IFLA_VLAN_FLAGS, - IFLA_VLAN_EGRESS_QOS, - IFLA_VLAN_INGRESS_QOS, - IFLA_VLAN_PROTOCOL, - __IFLA_VLAN_MAX, -}; - -#define IFLA_VLAN_MAX (__IFLA_VLAN_MAX - 1) - -struct ifla_vlan_flags { - __u32 flags; - __u32 mask; -}; - -enum { - IFLA_VLAN_QOS_UNSPEC, - IFLA_VLAN_QOS_MAPPING, - __IFLA_VLAN_QOS_MAX -}; - -#define IFLA_VLAN_QOS_MAX (__IFLA_VLAN_QOS_MAX - 1) - -struct ifla_vlan_qos_mapping { - __u32 from; - __u32 to; -}; - -/* MACVLAN section */ -enum { - IFLA_MACVLAN_UNSPEC, - IFLA_MACVLAN_MODE, - IFLA_MACVLAN_FLAGS, - IFLA_MACVLAN_MACADDR_MODE, - IFLA_MACVLAN_MACADDR, - IFLA_MACVLAN_MACADDR_DATA, - IFLA_MACVLAN_MACADDR_COUNT, - __IFLA_MACVLAN_MAX, -}; - -#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1) - -enum macvlan_mode { - MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */ - MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */ - MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */ - MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */ - MACVLAN_MODE_SOURCE = 16,/* use source MAC address list to assign */ -}; - -enum macvlan_macaddr_mode { - MACVLAN_MACADDR_ADD, - MACVLAN_MACADDR_DEL, - MACVLAN_MACADDR_FLUSH, - MACVLAN_MACADDR_SET, -}; - -#define MACVLAN_FLAG_NOPROMISC 1 - -/* VRF section */ -enum { - IFLA_VRF_UNSPEC, - IFLA_VRF_TABLE, - __IFLA_VRF_MAX -}; - -#define IFLA_VRF_MAX (__IFLA_VRF_MAX - 1) - -enum { - IFLA_VRF_PORT_UNSPEC, - IFLA_VRF_PORT_TABLE, - __IFLA_VRF_PORT_MAX -}; - -#define IFLA_VRF_PORT_MAX (__IFLA_VRF_PORT_MAX - 1) - -/* MACSEC section */ -enum { - IFLA_MACSEC_UNSPEC, - IFLA_MACSEC_SCI, - IFLA_MACSEC_PORT, - IFLA_MACSEC_ICV_LEN, - IFLA_MACSEC_CIPHER_SUITE, - IFLA_MACSEC_WINDOW, - IFLA_MACSEC_ENCODING_SA, - IFLA_MACSEC_ENCRYPT, - IFLA_MACSEC_PROTECT, - IFLA_MACSEC_INC_SCI, - IFLA_MACSEC_ES, - IFLA_MACSEC_SCB, - IFLA_MACSEC_REPLAY_PROTECT, - IFLA_MACSEC_VALIDATION, - IFLA_MACSEC_PAD, - __IFLA_MACSEC_MAX, -}; - -#define IFLA_MACSEC_MAX (__IFLA_MACSEC_MAX - 1) - -/* XFRM section */ -enum { - IFLA_XFRM_UNSPEC, - IFLA_XFRM_LINK, - IFLA_XFRM_IF_ID, - __IFLA_XFRM_MAX -}; - -#define IFLA_XFRM_MAX (__IFLA_XFRM_MAX - 1) - -enum macsec_validation_type { - MACSEC_VALIDATE_DISABLED = 0, - MACSEC_VALIDATE_CHECK = 1, - MACSEC_VALIDATE_STRICT = 2, - __MACSEC_VALIDATE_END, - MACSEC_VALIDATE_MAX = __MACSEC_VALIDATE_END - 1, -}; - -/* IPVLAN section */ -enum { - IFLA_IPVLAN_UNSPEC, - IFLA_IPVLAN_MODE, - IFLA_IPVLAN_FLAGS, - __IFLA_IPVLAN_MAX -}; - -#define IFLA_IPVLAN_MAX (__IFLA_IPVLAN_MAX - 1) - -enum ipvlan_mode { - IPVLAN_MODE_L2 = 0, - IPVLAN_MODE_L3, - IPVLAN_MODE_L3S, - IPVLAN_MODE_MAX -}; - -#define IPVLAN_F_PRIVATE 0x01 -#define IPVLAN_F_VEPA 0x02 - -/* VXLAN section */ -enum { - IFLA_VXLAN_UNSPEC, - IFLA_VXLAN_ID, - IFLA_VXLAN_GROUP, /* group or remote address */ - IFLA_VXLAN_LINK, - IFLA_VXLAN_LOCAL, - IFLA_VXLAN_TTL, - IFLA_VXLAN_TOS, - IFLA_VXLAN_LEARNING, - IFLA_VXLAN_AGEING, - IFLA_VXLAN_LIMIT, - IFLA_VXLAN_PORT_RANGE, /* source port */ - IFLA_VXLAN_PROXY, - IFLA_VXLAN_RSC, - IFLA_VXLAN_L2MISS, - IFLA_VXLAN_L3MISS, - IFLA_VXLAN_PORT, /* destination port */ - IFLA_VXLAN_GROUP6, - IFLA_VXLAN_LOCAL6, - IFLA_VXLAN_UDP_CSUM, - IFLA_VXLAN_UDP_ZERO_CSUM6_TX, - IFLA_VXLAN_UDP_ZERO_CSUM6_RX, - IFLA_VXLAN_REMCSUM_TX, - IFLA_VXLAN_REMCSUM_RX, - IFLA_VXLAN_GBP, - IFLA_VXLAN_REMCSUM_NOPARTIAL, - IFLA_VXLAN_COLLECT_METADATA, - IFLA_VXLAN_LABEL, - IFLA_VXLAN_GPE, - IFLA_VXLAN_TTL_INHERIT, - IFLA_VXLAN_DF, - __IFLA_VXLAN_MAX -}; -#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) - -struct ifla_vxlan_port_range { - __be16 low; - __be16 high; -}; - -enum ifla_vxlan_df { - VXLAN_DF_UNSET = 0, - VXLAN_DF_SET, - VXLAN_DF_INHERIT, - __VXLAN_DF_END, - VXLAN_DF_MAX = __VXLAN_DF_END - 1, -}; - -/* GENEVE section */ -enum { - IFLA_GENEVE_UNSPEC, - IFLA_GENEVE_ID, - IFLA_GENEVE_REMOTE, - IFLA_GENEVE_TTL, - IFLA_GENEVE_TOS, - IFLA_GENEVE_PORT, /* destination port */ - IFLA_GENEVE_COLLECT_METADATA, - IFLA_GENEVE_REMOTE6, - IFLA_GENEVE_UDP_CSUM, - IFLA_GENEVE_UDP_ZERO_CSUM6_TX, - IFLA_GENEVE_UDP_ZERO_CSUM6_RX, - IFLA_GENEVE_LABEL, - IFLA_GENEVE_TTL_INHERIT, - IFLA_GENEVE_DF, - __IFLA_GENEVE_MAX -}; -#define IFLA_GENEVE_MAX (__IFLA_GENEVE_MAX - 1) - -enum ifla_geneve_df { - GENEVE_DF_UNSET = 0, - GENEVE_DF_SET, - GENEVE_DF_INHERIT, - __GENEVE_DF_END, - GENEVE_DF_MAX = __GENEVE_DF_END - 1, -}; - -/* PPP section */ -enum { - IFLA_PPP_UNSPEC, - IFLA_PPP_DEV_FD, - __IFLA_PPP_MAX -}; -#define IFLA_PPP_MAX (__IFLA_PPP_MAX - 1) - -/* GTP section */ - -enum ifla_gtp_role { - GTP_ROLE_GGSN = 0, - GTP_ROLE_SGSN, -}; - -enum { - IFLA_GTP_UNSPEC, - IFLA_GTP_FD0, - IFLA_GTP_FD1, - IFLA_GTP_PDP_HASHSIZE, - IFLA_GTP_ROLE, - __IFLA_GTP_MAX, -}; -#define IFLA_GTP_MAX (__IFLA_GTP_MAX - 1) - -/* Bonding section */ - -enum { - IFLA_BOND_UNSPEC, - IFLA_BOND_MODE, - IFLA_BOND_ACTIVE_SLAVE, - IFLA_BOND_MIIMON, - IFLA_BOND_UPDELAY, - IFLA_BOND_DOWNDELAY, - IFLA_BOND_USE_CARRIER, - IFLA_BOND_ARP_INTERVAL, - IFLA_BOND_ARP_IP_TARGET, - IFLA_BOND_ARP_VALIDATE, - IFLA_BOND_ARP_ALL_TARGETS, - IFLA_BOND_PRIMARY, - IFLA_BOND_PRIMARY_RESELECT, - IFLA_BOND_FAIL_OVER_MAC, - IFLA_BOND_XMIT_HASH_POLICY, - IFLA_BOND_RESEND_IGMP, - IFLA_BOND_NUM_PEER_NOTIF, - IFLA_BOND_ALL_SLAVES_ACTIVE, - IFLA_BOND_MIN_LINKS, - IFLA_BOND_LP_INTERVAL, - IFLA_BOND_PACKETS_PER_SLAVE, - IFLA_BOND_AD_LACP_RATE, - IFLA_BOND_AD_SELECT, - IFLA_BOND_AD_INFO, - IFLA_BOND_AD_ACTOR_SYS_PRIO, - IFLA_BOND_AD_USER_PORT_KEY, - IFLA_BOND_AD_ACTOR_SYSTEM, - IFLA_BOND_TLB_DYNAMIC_LB, - __IFLA_BOND_MAX, -}; - -#define IFLA_BOND_MAX (__IFLA_BOND_MAX - 1) - -enum { - IFLA_BOND_AD_INFO_UNSPEC, - IFLA_BOND_AD_INFO_AGGREGATOR, - IFLA_BOND_AD_INFO_NUM_PORTS, - IFLA_BOND_AD_INFO_ACTOR_KEY, - IFLA_BOND_AD_INFO_PARTNER_KEY, - IFLA_BOND_AD_INFO_PARTNER_MAC, - __IFLA_BOND_AD_INFO_MAX, -}; - -#define IFLA_BOND_AD_INFO_MAX (__IFLA_BOND_AD_INFO_MAX - 1) - -enum { - IFLA_BOND_SLAVE_UNSPEC, - IFLA_BOND_SLAVE_STATE, - IFLA_BOND_SLAVE_MII_STATUS, - IFLA_BOND_SLAVE_LINK_FAILURE_COUNT, - IFLA_BOND_SLAVE_PERM_HWADDR, - IFLA_BOND_SLAVE_QUEUE_ID, - IFLA_BOND_SLAVE_AD_AGGREGATOR_ID, - IFLA_BOND_SLAVE_AD_ACTOR_OPER_PORT_STATE, - IFLA_BOND_SLAVE_AD_PARTNER_OPER_PORT_STATE, - __IFLA_BOND_SLAVE_MAX, -}; - -#define IFLA_BOND_SLAVE_MAX (__IFLA_BOND_SLAVE_MAX - 1) - -/* SR-IOV virtual function management section */ - -enum { - IFLA_VF_INFO_UNSPEC, - IFLA_VF_INFO, - __IFLA_VF_INFO_MAX, -}; - -#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1) - -enum { - IFLA_VF_UNSPEC, - IFLA_VF_MAC, /* Hardware queue specific attributes */ - IFLA_VF_VLAN, /* VLAN ID and QoS */ - IFLA_VF_TX_RATE, /* Max TX Bandwidth Allocation */ - IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */ - IFLA_VF_LINK_STATE, /* link state enable/disable/auto switch */ - IFLA_VF_RATE, /* Min and Max TX Bandwidth Allocation */ - IFLA_VF_RSS_QUERY_EN, /* RSS Redirection Table and Hash Key query - * on/off switch - */ - IFLA_VF_STATS, /* network device statistics */ - IFLA_VF_TRUST, /* Trust VF */ - IFLA_VF_IB_NODE_GUID, /* VF Infiniband node GUID */ - IFLA_VF_IB_PORT_GUID, /* VF Infiniband port GUID */ - IFLA_VF_VLAN_LIST, /* nested list of vlans, option for QinQ */ - __IFLA_VF_MAX, -}; - -#define IFLA_VF_MAX (__IFLA_VF_MAX - 1) - -struct ifla_vf_mac { - __u32 vf; - __u8 mac[32]; /* MAX_ADDR_LEN */ -}; - -struct ifla_vf_vlan { - __u32 vf; - __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */ - __u32 qos; -}; - -enum { - IFLA_VF_VLAN_INFO_UNSPEC, - IFLA_VF_VLAN_INFO, /* VLAN ID, QoS and VLAN protocol */ - __IFLA_VF_VLAN_INFO_MAX, -}; - -#define IFLA_VF_VLAN_INFO_MAX (__IFLA_VF_VLAN_INFO_MAX - 1) -#define MAX_VLAN_LIST_LEN 1 - -struct ifla_vf_vlan_info { - __u32 vf; - __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */ - __u32 qos; - __be16 vlan_proto; /* VLAN protocol either 802.1Q or 802.1ad */ -}; - -struct ifla_vf_tx_rate { - __u32 vf; - __u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */ -}; - -struct ifla_vf_rate { - __u32 vf; - __u32 min_tx_rate; /* Min Bandwidth in Mbps */ - __u32 max_tx_rate; /* Max Bandwidth in Mbps */ -}; - -struct ifla_vf_spoofchk { - __u32 vf; - __u32 setting; -}; - -struct ifla_vf_guid { - __u32 vf; - __u64 guid; -}; - -enum { - IFLA_VF_LINK_STATE_AUTO, /* link state of the uplink */ - IFLA_VF_LINK_STATE_ENABLE, /* link always up */ - IFLA_VF_LINK_STATE_DISABLE, /* link always down */ - __IFLA_VF_LINK_STATE_MAX, -}; - -struct ifla_vf_link_state { - __u32 vf; - __u32 link_state; -}; - -struct ifla_vf_rss_query_en { - __u32 vf; - __u32 setting; -}; - -enum { - IFLA_VF_STATS_RX_PACKETS, - IFLA_VF_STATS_TX_PACKETS, - IFLA_VF_STATS_RX_BYTES, - IFLA_VF_STATS_TX_BYTES, - IFLA_VF_STATS_BROADCAST, - IFLA_VF_STATS_MULTICAST, - IFLA_VF_STATS_PAD, - IFLA_VF_STATS_RX_DROPPED, - IFLA_VF_STATS_TX_DROPPED, - __IFLA_VF_STATS_MAX, -}; - -#define IFLA_VF_STATS_MAX (__IFLA_VF_STATS_MAX - 1) - -struct ifla_vf_trust { - __u32 vf; - __u32 setting; -}; - -/* VF ports management section - * - * Nested layout of set/get msg is: - * - * [IFLA_NUM_VF] - * [IFLA_VF_PORTS] - * [IFLA_VF_PORT] - * [IFLA_PORT_*], ... - * [IFLA_VF_PORT] - * [IFLA_PORT_*], ... - * ... - * [IFLA_PORT_SELF] - * [IFLA_PORT_*], ... - */ - -enum { - IFLA_VF_PORT_UNSPEC, - IFLA_VF_PORT, /* nest */ - __IFLA_VF_PORT_MAX, -}; - -#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1) - -enum { - IFLA_PORT_UNSPEC, - IFLA_PORT_VF, /* __u32 */ - IFLA_PORT_PROFILE, /* string */ - IFLA_PORT_VSI_TYPE, /* 802.1Qbg (pre-)standard VDP */ - IFLA_PORT_INSTANCE_UUID, /* binary UUID */ - IFLA_PORT_HOST_UUID, /* binary UUID */ - IFLA_PORT_REQUEST, /* __u8 */ - IFLA_PORT_RESPONSE, /* __u16, output only */ - __IFLA_PORT_MAX, -}; - -#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1) - -#define PORT_PROFILE_MAX 40 -#define PORT_UUID_MAX 16 -#define PORT_SELF_VF -1 - -enum { - PORT_REQUEST_PREASSOCIATE = 0, - PORT_REQUEST_PREASSOCIATE_RR, - PORT_REQUEST_ASSOCIATE, - PORT_REQUEST_DISASSOCIATE, -}; - -enum { - PORT_VDP_RESPONSE_SUCCESS = 0, - PORT_VDP_RESPONSE_INVALID_FORMAT, - PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES, - PORT_VDP_RESPONSE_UNUSED_VTID, - PORT_VDP_RESPONSE_VTID_VIOLATION, - PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION, - PORT_VDP_RESPONSE_OUT_OF_SYNC, - /* 0x08-0xFF reserved for future VDP use */ - PORT_PROFILE_RESPONSE_SUCCESS = 0x100, - PORT_PROFILE_RESPONSE_INPROGRESS, - PORT_PROFILE_RESPONSE_INVALID, - PORT_PROFILE_RESPONSE_BADSTATE, - PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES, - PORT_PROFILE_RESPONSE_ERROR, -}; - -struct ifla_port_vsi { - __u8 vsi_mgr_id; - __u8 vsi_type_id[3]; - __u8 vsi_type_version; - __u8 pad[3]; -}; - - -/* IPoIB section */ - -enum { - IFLA_IPOIB_UNSPEC, - IFLA_IPOIB_PKEY, - IFLA_IPOIB_MODE, - IFLA_IPOIB_UMCAST, - __IFLA_IPOIB_MAX -}; - -enum { - IPOIB_MODE_DATAGRAM = 0, /* using unreliable datagram QPs */ - IPOIB_MODE_CONNECTED = 1, /* using connected QPs */ -}; - -#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1) - - -/* HSR section */ - -enum { - IFLA_HSR_UNSPEC, - IFLA_HSR_SLAVE1, - IFLA_HSR_SLAVE2, - IFLA_HSR_MULTICAST_SPEC, /* Last byte of supervision addr */ - IFLA_HSR_SUPERVISION_ADDR, /* Supervision frame multicast addr */ - IFLA_HSR_SEQ_NR, - IFLA_HSR_VERSION, /* HSR version */ - __IFLA_HSR_MAX, -}; - -#define IFLA_HSR_MAX (__IFLA_HSR_MAX - 1) - -/* STATS section */ - -struct if_stats_msg { - __u8 family; - __u8 pad1; - __u16 pad2; - __u32 ifindex; - __u32 filter_mask; -}; - -/* A stats attribute can be netdev specific or a global stat. - * For netdev stats, lets use the prefix IFLA_STATS_LINK_* - */ -enum { - IFLA_STATS_UNSPEC, /* also used as 64bit pad attribute */ - IFLA_STATS_LINK_64, - IFLA_STATS_LINK_XSTATS, - IFLA_STATS_LINK_XSTATS_SLAVE, - IFLA_STATS_LINK_OFFLOAD_XSTATS, - IFLA_STATS_AF_SPEC, - __IFLA_STATS_MAX, -}; - -#define IFLA_STATS_MAX (__IFLA_STATS_MAX - 1) - -#define IFLA_STATS_FILTER_BIT(ATTR) (1 << (ATTR - 1)) - -/* These are embedded into IFLA_STATS_LINK_XSTATS: - * [IFLA_STATS_LINK_XSTATS] - * -> [LINK_XSTATS_TYPE_xxx] - * -> [rtnl link type specific attributes] - */ -enum { - LINK_XSTATS_TYPE_UNSPEC, - LINK_XSTATS_TYPE_BRIDGE, - LINK_XSTATS_TYPE_BOND, - __LINK_XSTATS_TYPE_MAX -}; -#define LINK_XSTATS_TYPE_MAX (__LINK_XSTATS_TYPE_MAX - 1) - -/* These are stats embedded into IFLA_STATS_LINK_OFFLOAD_XSTATS */ -enum { - IFLA_OFFLOAD_XSTATS_UNSPEC, - IFLA_OFFLOAD_XSTATS_CPU_HIT, /* struct rtnl_link_stats64 */ - __IFLA_OFFLOAD_XSTATS_MAX -}; -#define IFLA_OFFLOAD_XSTATS_MAX (__IFLA_OFFLOAD_XSTATS_MAX - 1) - -/* XDP section */ - -#define XDP_FLAGS_UPDATE_IF_NOEXIST (1U << 0) -#define XDP_FLAGS_SKB_MODE (1U << 1) -#define XDP_FLAGS_DRV_MODE (1U << 2) -#define XDP_FLAGS_HW_MODE (1U << 3) -#define XDP_FLAGS_MODES (XDP_FLAGS_SKB_MODE | \ - XDP_FLAGS_DRV_MODE | \ - XDP_FLAGS_HW_MODE) -#define XDP_FLAGS_MASK (XDP_FLAGS_UPDATE_IF_NOEXIST | \ - XDP_FLAGS_MODES) - -/* These are stored into IFLA_XDP_ATTACHED on dump. */ -enum { - XDP_ATTACHED_NONE = 0, - XDP_ATTACHED_DRV, - XDP_ATTACHED_SKB, - XDP_ATTACHED_HW, - XDP_ATTACHED_MULTI, -}; - -enum { - IFLA_XDP_UNSPEC, - IFLA_XDP_FD, - IFLA_XDP_ATTACHED, - IFLA_XDP_FLAGS, - IFLA_XDP_PROG_ID, - IFLA_XDP_DRV_PROG_ID, - IFLA_XDP_SKB_PROG_ID, - IFLA_XDP_HW_PROG_ID, - __IFLA_XDP_MAX, -}; - -#define IFLA_XDP_MAX (__IFLA_XDP_MAX - 1) - -enum { - IFLA_EVENT_NONE, - IFLA_EVENT_REBOOT, /* internal reset / reboot */ - IFLA_EVENT_FEATURES, /* change in offload features */ - IFLA_EVENT_BONDING_FAILOVER, /* change in active slave */ - IFLA_EVENT_NOTIFY_PEERS, /* re-sent grat. arp/ndisc */ - IFLA_EVENT_IGMP_RESEND, /* re-sent IGMP JOIN */ - IFLA_EVENT_BONDING_OPTIONS, /* change in bonding options */ -}; - -/* tun section */ - -enum { - IFLA_TUN_UNSPEC, - IFLA_TUN_OWNER, - IFLA_TUN_GROUP, - IFLA_TUN_TYPE, - IFLA_TUN_PI, - IFLA_TUN_VNET_HDR, - IFLA_TUN_PERSIST, - IFLA_TUN_MULTI_QUEUE, - IFLA_TUN_NUM_QUEUES, - IFLA_TUN_NUM_DISABLED_QUEUES, - __IFLA_TUN_MAX, -}; - -#define IFLA_TUN_MAX (__IFLA_TUN_MAX - 1) - -/* rmnet section */ - -#define RMNET_FLAGS_INGRESS_DEAGGREGATION (1U << 0) -#define RMNET_FLAGS_INGRESS_MAP_COMMANDS (1U << 1) -#define RMNET_FLAGS_INGRESS_MAP_CKSUMV4 (1U << 2) -#define RMNET_FLAGS_EGRESS_MAP_CKSUMV4 (1U << 3) - -enum { - IFLA_RMNET_UNSPEC, - IFLA_RMNET_MUX_ID, - IFLA_RMNET_FLAGS, - __IFLA_RMNET_MAX, -}; - -#define IFLA_RMNET_MAX (__IFLA_RMNET_MAX - 1) - -struct ifla_rmnet_flags { - __u32 flags; - __u32 mask; -}; - -#endif /* _UAPI_LINUX_IF_LINK_H */ diff --git a/src/xdp/include/linux/if_xdp.h b/src/xdp/include/linux/if_xdp.h deleted file mode 100644 index be328c593..000000000 --- a/src/xdp/include/linux/if_xdp.h +++ /dev/null @@ -1,108 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * if_xdp: XDP socket user-space interface - * Copyright(c) 2018 Intel Corporation. - * - * Author(s): Björn Töpel <bjorn.topel@intel.com> - * Magnus Karlsson <magnus.karlsson@intel.com> - */ - -#ifndef _LINUX_IF_XDP_H -#define _LINUX_IF_XDP_H - -#include <linux/types.h> - -/* Options for the sxdp_flags field */ -#define XDP_SHARED_UMEM (1 << 0) -#define XDP_COPY (1 << 1) /* Force copy-mode */ -#define XDP_ZEROCOPY (1 << 2) /* Force zero-copy mode */ -/* If this option is set, the driver might go sleep and in that case - * the XDP_RING_NEED_WAKEUP flag in the fill and/or Tx rings will be - * set. If it is set, the application need to explicitly wake up the - * driver with a poll() (Rx and Tx) or sendto() (Tx only). If you are - * running the driver and the application on the same core, you should - * use this option so that the kernel will yield to the user space - * application. - */ -#define XDP_USE_NEED_WAKEUP (1 << 3) - -/* Flags for xsk_umem_config flags */ -#define XDP_UMEM_UNALIGNED_CHUNK_FLAG (1 << 0) - -struct sockaddr_xdp { - __u16 sxdp_family; - __u16 sxdp_flags; - __u32 sxdp_ifindex; - __u32 sxdp_queue_id; - __u32 sxdp_shared_umem_fd; -}; - -/* XDP_RING flags */ -#define XDP_RING_NEED_WAKEUP (1 << 0) - -struct xdp_ring_offset { - __u64 producer; - __u64 consumer; - __u64 desc; - __u64 flags; -}; - -struct xdp_mmap_offsets { - struct xdp_ring_offset rx; - struct xdp_ring_offset tx; - struct xdp_ring_offset fr; /* Fill */ - struct xdp_ring_offset cr; /* Completion */ -}; - -/* XDP socket options */ -#define XDP_MMAP_OFFSETS 1 -#define XDP_RX_RING 2 -#define XDP_TX_RING 3 -#define XDP_UMEM_REG 4 -#define XDP_UMEM_FILL_RING 5 -#define XDP_UMEM_COMPLETION_RING 6 -#define XDP_STATISTICS 7 -#define XDP_OPTIONS 8 - -struct xdp_umem_reg { - __u64 addr; /* Start of packet data area */ - __u64 len; /* Length of packet data area */ - __u32 chunk_size; - __u32 headroom; - __u32 flags; -}; - -struct xdp_statistics { - __u64 rx_dropped; /* Dropped for reasons other than invalid desc */ - __u64 rx_invalid_descs; /* Dropped due to invalid descriptor */ - __u64 tx_invalid_descs; /* Dropped due to invalid descriptor */ -}; - -struct xdp_options { - __u32 flags; -}; - -/* Flags for the flags field of struct xdp_options */ -#define XDP_OPTIONS_ZEROCOPY (1 << 0) - -/* Pgoff for mmaping the rings */ -#define XDP_PGOFF_RX_RING 0 -#define XDP_PGOFF_TX_RING 0x80000000 -#define XDP_UMEM_PGOFF_FILL_RING 0x100000000ULL -#define XDP_UMEM_PGOFF_COMPLETION_RING 0x180000000ULL - -/* Masks for unaligned chunks mode */ -#define XSK_UNALIGNED_BUF_OFFSET_SHIFT 48 -#define XSK_UNALIGNED_BUF_ADDR_MASK \ - ((1ULL << XSK_UNALIGNED_BUF_OFFSET_SHIFT) - 1) - -/* Rx/Tx descriptor */ -struct xdp_desc { - __u64 addr; - __u32 len; - __u32 options; -}; - -/* UMEM descriptor is __u64 */ - -#endif /* _LINUX_IF_XDP_H */ diff --git a/src/xdp/include/perf-sys.h b/src/xdp/include/perf-sys.h deleted file mode 100644 index 2fd16e482..000000000 --- a/src/xdp/include/perf-sys.h +++ /dev/null @@ -1,77 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Copied from $(LINUX)/tools/perf/perf-sys.h (kernel 4.18) */ -#ifndef _PERF_SYS_H -#define _PERF_SYS_H - -#include <unistd.h> -#include <sys/types.h> -#include <sys/syscall.h> -#include <linux/types.h> -#include <linux/perf_event.h> -/* - * remove the following headers to allow for userspace program compilation - * #include <linux/compiler.h> - * #include <asm/barrier.h> - */ -#ifdef __powerpc__ -#define CPUINFO_PROC {"cpu"} -#endif - -#ifdef __s390__ -#define CPUINFO_PROC {"vendor_id"} -#endif - -#ifdef __sh__ -#define CPUINFO_PROC {"cpu type"} -#endif - -#ifdef __hppa__ -#define CPUINFO_PROC {"cpu"} -#endif - -#ifdef __sparc__ -#define CPUINFO_PROC {"cpu"} -#endif - -#ifdef __alpha__ -#define CPUINFO_PROC {"cpu model"} -#endif - -#ifdef __arm__ -#define CPUINFO_PROC {"model name", "Processor"} -#endif - -#ifdef __mips__ -#define CPUINFO_PROC {"cpu model"} -#endif - -#ifdef __arc__ -#define CPUINFO_PROC {"Processor"} -#endif - -#ifdef __xtensa__ -#define CPUINFO_PROC {"core ID"} -#endif - -#ifndef CPUINFO_PROC -#define CPUINFO_PROC { "model name", } -#endif - -static inline int -sys_perf_event_open(struct perf_event_attr *attr, - pid_t pid, int cpu, int group_fd, - unsigned long flags) -{ - int fd; - - fd = syscall(__NR_perf_event_open, attr, pid, cpu, - group_fd, flags); - -#ifdef HAVE_ATTR_TEST - if (unlikely(test_attr__enabled)) - test_attr__open(attr, pid, cpu, fd, group_fd, flags); -#endif - return fd; -} - -#endif /* _PERF_SYS_H */ diff --git a/src/xdp/utils/Makefile b/src/xdp/utils/Makefile deleted file mode 100644 index 42d6e63e3..000000000 --- a/src/xdp/utils/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - -USER_TARGETS := xdp_stats xdp_loader - -LIBBPF_DIR = ../libbpf/src/ -COMMON_DIR = ../common/ - -# Extend with another COMMON_OBJS -COMMON_OBJS += $(COMMON_DIR)/common_libbpf.o - -include $(COMMON_DIR)/common.mk diff --git a/src/xdp/utils/xdp_loader.c b/src/xdp/utils/xdp_loader.c deleted file mode 100644 index d3b05d0c0..000000000 --- a/src/xdp/utils/xdp_loader.c +++ /dev/null @@ -1,165 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -static const char *__doc__ = "XDP loader\n" - " - Allows selecting BPF section --progsec name to XDP-attach to --dev\n"; - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <errno.h> -#include <getopt.h> - -#include <locale.h> -#include <unistd.h> -#include <time.h> - -#include <bpf/bpf.h> -#include <bpf/libbpf.h> - -#include <net/if.h> -#include <linux/if_link.h> /* depend on kernel-headers installed */ - -#include "../common/common_params.h" -#include "../common/common_user_bpf_xdp.h" -#include "../common/common_libbpf.h" - -static const char *default_filename = "xdp_prog_kern.o"; - -static const struct option_wrapper long_options[] = { - - {{"help", no_argument, NULL, 'h' }, - "Show help", false}, - - {{"dev", required_argument, NULL, 'd' }, - "Operate on device <ifname>", "<ifname>", true}, - - {{"skb-mode", no_argument, NULL, 'S' }, - "Install XDP program in SKB (AKA generic) mode"}, - - {{"native-mode", no_argument, NULL, 'N' }, - "Install XDP program in native mode"}, - - {{"auto-mode", no_argument, NULL, 'A' }, - "Auto-detect SKB or native mode"}, - - {{"force", no_argument, NULL, 'F' }, - "Force install, replacing existing program on interface"}, - - {{"unload", no_argument, NULL, 'U' }, - "Unload XDP program instead of loading"}, - - {{"reuse-maps", no_argument, NULL, 'M' }, - "Reuse pinned maps"}, - - {{"quiet", no_argument, NULL, 'q' }, - "Quiet mode (no output)"}, - - {{"filename", required_argument, NULL, 1 }, - "Load program from <file>", "<file>"}, - - {{"progsec", required_argument, NULL, 2 }, - "Load program in <section> of the ELF file", "<section>"}, - - {{0, 0, NULL, 0 }, NULL, false} -}; - -#ifndef PATH_MAX -#define PATH_MAX 4096 -#endif - -const char *pin_basedir = "/sys/fs/bpf"; -const char *map_name = "xdp_stats_map"; - -/* Pinning maps under /sys/fs/bpf in subdir */ -int pin_maps_in_bpf_object(struct bpf_object *bpf_obj, struct config *cfg) -{ - char map_filename[PATH_MAX]; - int err, len; - - len = snprintf(map_filename, PATH_MAX, "%s/%s/%s", - pin_basedir, cfg->ifname, map_name); - if (len < 0) { - fprintf(stderr, "ERR: creating map_name\n"); - return EXIT_FAIL_OPTION; - } - - /* Existing/previous XDP prog might not have cleaned up */ - if (access(map_filename, F_OK ) != -1 ) { - if (verbose) - printf(" - Unpinning (remove) prev maps in %s/\n", - cfg->pin_dir); - - /* Basically calls unlink(3) on map_filename */ - err = bpf_object__unpin_maps(bpf_obj, cfg->pin_dir); - if (err) { - fprintf(stderr, "ERR: UNpinning maps in %s\n", cfg->pin_dir); - return EXIT_FAIL_BPF; - } - } - if (verbose) - printf(" - Pinning maps in %s/\n", cfg->pin_dir); - - /* This will pin all maps in our bpf_object */ - err = bpf_object__pin_maps(bpf_obj, cfg->pin_dir); - if (err) - return EXIT_FAIL_BPF; - - return 0; -} - -int main(int argc, char **argv) -{ - struct bpf_object *bpf_obj; - int err, len; - - struct config cfg = { - .xdp_flags = XDP_FLAGS_UPDATE_IF_NOEXIST | XDP_FLAGS_DRV_MODE, - .ifindex = -1, - .do_unload = false, - }; - /* Set default BPF-ELF object file and BPF program name */ - strncpy(cfg.filename, default_filename, sizeof(cfg.filename)); - /* Cmdline options can change progsec */ - parse_cmdline_args(argc, argv, long_options, &cfg, __doc__); - - /* Required option */ - if (cfg.ifindex == -1) { - fprintf(stderr, "ERR: required option --dev missing\n\n"); - usage(argv[0], __doc__, long_options, (argc == 1)); - return EXIT_FAIL_OPTION; - } - if (cfg.do_unload) { - if (!cfg.reuse_maps) { - /* TODO: Miss unpin of maps on unload */ - } - return xdp_link_detach(cfg.ifindex, cfg.xdp_flags, 0); - } - - len = snprintf(cfg.pin_dir, PATH_MAX, "%s/%s", pin_basedir, cfg.ifname); - if (len < 0) { - fprintf(stderr, "ERR: creating pin dirname\n"); - return EXIT_FAIL_OPTION; - } - - - bpf_obj = load_bpf_and_xdp_attach(&cfg); - if (!bpf_obj) - return EXIT_FAIL_BPF; - - if (verbose) { - printf("Success: Loaded BPF-object(%s) and used section(%s)\n", - cfg.filename, cfg.progsec); - printf(" - XDP prog attached on device:%s(ifindex:%d)\n", - cfg.ifname, cfg.ifindex); - } - - /* Use the --dev name as subdir for exporting/pinning maps */ - if (!cfg.reuse_maps) { - err = pin_maps_in_bpf_object(bpf_obj, &cfg); - if (err) { - fprintf(stderr, "ERR: pinning maps\n"); - return err; - } - } - - return EXIT_OK; -} diff --git a/src/xdp/utils/xdp_stats.c b/src/xdp/utils/xdp_stats.c deleted file mode 100644 index f9fa7438f..000000000 --- a/src/xdp/utils/xdp_stats.c +++ /dev/null @@ -1,298 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -static const char *__doc__ = "XDP stats program\n" - " - Finding xdp_stats_map via --dev name info\n"; - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <errno.h> -#include <getopt.h> - -#include <locale.h> -#include <unistd.h> -#include <time.h> - -#include <bpf/bpf.h> -/* Lesson#1: this prog does not need to #include <bpf/libbpf.h> as it only uses - * the simple bpf-syscall wrappers, defined in libbpf #include<bpf/bpf.h> - */ - -#include <net/if.h> -#include <linux/if_link.h> /* depend on kernel-headers installed */ - -#include "../common/common_params.h" -#include "../common/common_user_bpf_xdp.h" -#include "../common/xdp_stats_kern_user.h" - -#include "../include/bpf_util.h" /* bpf_num_possible_cpus */ - -static const struct option_wrapper long_options[] = { - {{"help", no_argument, NULL, 'h' }, - "Show help", false}, - - {{"dev", required_argument, NULL, 'd' }, - "Operate on device <ifname>", "<ifname>", true}, - - {{"quiet", no_argument, NULL, 'q' }, - "Quiet mode (no output)"}, - - {{0, 0, NULL, 0 }} -}; - -#define NANOSEC_PER_SEC 1000000000 /* 10^9 */ -static __u64 gettime(void) -{ - struct timespec t; - int res; - - res = clock_gettime(CLOCK_MONOTONIC, &t); - if (res < 0) { - fprintf(stderr, "Error with gettimeofday! (%i)\n", res); - exit(EXIT_FAIL); - } - return (__u64) t.tv_sec * NANOSEC_PER_SEC + t.tv_nsec; -} - -struct record { - __u64 timestamp; - struct datarec total; /* defined in common_kern_user.h */ -}; - -struct stats_record { - struct record stats[XDP_ACTION_MAX]; -}; - -static double calc_period(struct record *r, struct record *p) -{ - double period_ = 0; - __u64 period = 0; - - period = r->timestamp - p->timestamp; - if (period > 0) - period_ = ((double) period / NANOSEC_PER_SEC); - - return period_; -} - -static void stats_print_header() -{ - /* Print stats "header" */ - printf("%-12s\n", "XDP-action"); -} - -static void stats_print(struct stats_record *stats_rec, - struct stats_record *stats_prev) -{ - struct record *rec, *prev; - __u64 packets, bytes; - double period; - double pps; /* packets per sec */ - double bps; /* bits per sec */ - int i; - - stats_print_header(); /* Print stats "header" */ - - /* Print for each XDP actions stats */ - for (i = 0; i < XDP_ACTION_MAX; i++) - { - char *fmt = "%-12s %'11lld pkts (%'10.0f pps)" - " %'11lld Kbytes (%'6.0f Mbits/s)" - " period:%f\n"; - const char *action = action2str(i); - - rec = &stats_rec->stats[i]; - prev = &stats_prev->stats[i]; - - period = calc_period(rec, prev); - if (period == 0) - return; - - packets = rec->total.rx_packets - prev->total.rx_packets; - pps = packets / period; - - bytes = rec->total.rx_bytes - prev->total.rx_bytes; - bps = (bytes * 8)/ period / 1000000; - - printf(fmt, action, rec->total.rx_packets, pps, - rec->total.rx_bytes / 1000 , bps, - period); - } - printf("\n"); -} - - -/* BPF_MAP_TYPE_ARRAY */ -void map_get_value_array(int fd, __u32 key, struct datarec *value) -{ - if ((bpf_map_lookup_elem(fd, &key, value)) != 0) { - fprintf(stderr, - "ERR: bpf_map_lookup_elem failed key:0x%X\n", key); - } -} - -/* BPF_MAP_TYPE_PERCPU_ARRAY */ -void map_get_value_percpu_array(int fd, __u32 key, struct datarec *value) -{ - /* For percpu maps, userspace gets a value per possible CPU */ - unsigned int nr_cpus = bpf_num_possible_cpus(); - struct datarec values[nr_cpus]; - __u64 sum_bytes = 0; - __u64 sum_pkts = 0; - int i; - - if ((bpf_map_lookup_elem(fd, &key, values)) != 0) { - fprintf(stderr, - "ERR: bpf_map_lookup_elem failed key:0x%X\n", key); - return; - } - - /* Sum values from each CPU */ - for (i = 0; i < nr_cpus; i++) { - sum_pkts += values[i].rx_packets; - sum_bytes += values[i].rx_bytes; - } - value->rx_packets = sum_pkts; - value->rx_bytes = sum_bytes; -} - -static bool map_collect(int fd, __u32 map_type, __u32 key, struct record *rec) -{ - struct datarec value; - - /* Get time as close as possible to reading map contents */ - rec->timestamp = gettime(); - - switch (map_type) { - case BPF_MAP_TYPE_ARRAY: - map_get_value_array(fd, key, &value); - break; - case BPF_MAP_TYPE_PERCPU_ARRAY: - map_get_value_percpu_array(fd, key, &value); - break; - default: - fprintf(stderr, "ERR: Unknown map_type(%u) cannot handle\n", - map_type); - return false; - break; - } - - rec->total.rx_packets = value.rx_packets; - rec->total.rx_bytes = value.rx_bytes; - return true; -} - -static void stats_collect(int map_fd, __u32 map_type, - struct stats_record *stats_rec) -{ - /* Collect all XDP actions stats */ - __u32 key; - - for (key = 0; key < XDP_ACTION_MAX; key++) { - map_collect(map_fd, map_type, key, &stats_rec->stats[key]); - } -} - -static int stats_poll(const char *pin_dir, int map_fd, __u32 id, - __u32 map_type, int interval) -{ - struct bpf_map_info info = {}; - struct stats_record prev, record = { 0 }; - int counter = 0; - - /* Trick to pretty printf with thousands separators use %' */ - setlocale(LC_NUMERIC, "en_US"); - - /* Get initial reading quickly */ - stats_collect(map_fd, map_type, &record); - usleep(1000000/4); - - while (1) { - prev = record; /* struct copy */ - - map_fd = open_bpf_map_file(pin_dir, "xdp_stats_map", &info); - if (map_fd < 0) { - return EXIT_FAIL_BPF; - } else if (id != info.id) { - printf("BPF map xdp_stats_map changed its ID, restarting\n"); - return 0; - } - - stats_collect(map_fd, map_type, &record); - stats_print(&record, &prev); - sleep(interval); - counter++; - if (counter > 1) { - return 0; - } - } - - return 0; -} - -#ifndef PATH_MAX -#define PATH_MAX 4096 -#endif - -const char *pin_basedir = "/sys/fs/bpf"; - -int main(int argc, char **argv) -{ - const struct bpf_map_info map_expect = { - .key_size = sizeof(__u32), - .value_size = sizeof(struct datarec), - .max_entries = XDP_ACTION_MAX, - }; - struct bpf_map_info info = { 0 }; - char pin_dir[PATH_MAX]; - int stats_map_fd; - int interval = 2; - int len, err; - - struct config cfg = { - .ifindex = -1, - .do_unload = false, - }; - - /* Cmdline options can change progsec */ - parse_cmdline_args(argc, argv, long_options, &cfg, __doc__); - - /* Required option */ - if (cfg.ifindex == -1) { - fprintf(stderr, "ERR: required option --dev missing\n\n"); - usage(argv[0], __doc__, long_options, (argc == 1)); - return EXIT_FAIL_OPTION; - } - - /* Use the --dev name as subdir for finding pinned maps */ - len = snprintf(pin_dir, PATH_MAX, "%s/%s", pin_basedir, cfg.ifname); - if (len < 0) { - fprintf(stderr, "ERR: creating pin dirname\n"); - return EXIT_FAIL_OPTION; - } - - stats_map_fd = open_bpf_map_file(pin_dir, "xdp_stats_map", &info); - if (stats_map_fd < 0) { - return EXIT_FAIL_BPF; - } - - /* check map info, e.g. datarec is expected size */ - err = check_map_fd_info(&info, &map_expect); - if (err) { - fprintf(stderr, "ERR: map via FD not compatible\n"); - return err; - } - if (verbose) { - printf("\nCollecting stats from BPF map\n"); - printf(" - BPF map (bpf_map_type:%d) id:%d name:%s" - " key_size:%d value_size:%d max_entries:%d\n", - info.type, info.id, info.name, - info.key_size, info.value_size, info.max_entries - ); - } - - err = stats_poll(pin_dir, stats_map_fd, info.id, info.type, interval); - if (err < 0) - return err; - - return EXIT_OK; -} diff --git a/src/xdp/xdp_prog_kern.c b/src/xdp/xdp_prog_kern.c deleted file mode 100644 index 59308325d..000000000 --- a/src/xdp/xdp_prog_kern.c +++ /dev/null @@ -1,347 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#include <linux/bpf.h> -#include <linux/in.h> -#include <bpf/bpf_helpers.h> -#include <bpf/bpf_endian.h> - -// The parsing helper functions from the packet01 lesson have moved here -#include "common/parsing_helpers.h" -#include "common/rewrite_helpers.h" - -/* Defines xdp_stats_map */ -#include "common/xdp_stats_kern_user.h" -#include "common/xdp_stats_kern.h" - -#ifndef memcpy -#define memcpy(dest, src, n) __builtin_memcpy((dest), (src), (n)) -#endif - -struct { - __uint(type, BPF_MAP_TYPE_DEVMAP); - __type(key, int); - __type(value, int); - __uint(max_entries, 256); -} tx_port SEC(".maps"); - -struct { - __uint(type, BPF_MAP_TYPE_HASH); - __type(key, ETH_ALEN); - __type(value, ETH_ALEN); - __uint(max_entries, 1); -} redirect_params SEC(".maps"); - -static __always_inline __u16 csum_fold_helper(__u32 csum) -{ - return ~((csum & 0xffff) + (csum >> 16)); -} - -/* - * The icmp_checksum_diff function takes pointers to old and new structures and - * the old checksum and returns the new checksum. It uses the bpf_csum_diff - * helper to compute the checksum difference. Note that the sizes passed to the - * bpf_csum_diff helper should be multiples of 4, as it operates on 32-bit - * words. - */ -static __always_inline __u16 icmp_checksum_diff( - __u16 seed, - struct icmphdr_common *icmphdr_new, - struct icmphdr_common *icmphdr_old) -{ - __u32 csum, size = sizeof(struct icmphdr_common); - - csum = bpf_csum_diff((__be32 *)icmphdr_old, size, (__be32 *)icmphdr_new, size, seed); - return csum_fold_helper(csum); -} - -/* Solution to packet03/assignment-1 */ -SEC("xdp_icmp_echo") -int xdp_icmp_echo_func(struct xdp_md *ctx) -{ - void *data_end = (void *)(long)ctx->data_end; - void *data = (void *)(long)ctx->data; - struct hdr_cursor nh; - struct ethhdr *eth; - int eth_type; - int ip_type; - int icmp_type; - struct iphdr *iphdr; - struct ipv6hdr *ipv6hdr; - __u16 echo_reply, old_csum; - struct icmphdr_common *icmphdr; - struct icmphdr_common icmphdr_old; - __u32 action = XDP_PASS; - - /* These keep track of the next header type and iterator pointer */ - nh.pos = data; - - /* Parse Ethernet and IP/IPv6 headers */ - eth_type = parse_ethhdr(&nh, data_end, ð); - if (eth_type == bpf_htons(ETH_P_IP)) { - ip_type = parse_iphdr(&nh, data_end, &iphdr); - if (ip_type != IPPROTO_ICMP) - goto out; - } else if (eth_type == bpf_htons(ETH_P_IPV6)) { - ip_type = parse_ip6hdr(&nh, data_end, &ipv6hdr); - if (ip_type != IPPROTO_ICMPV6) - goto out; - } else { - goto out; - } - - /* - * We are using a special parser here which returns a stucture - * containing the "protocol-independent" part of an ICMP or ICMPv6 - * header. For purposes of this Assignment we are not interested in - * the rest of the structure. - */ - icmp_type = parse_icmphdr_common(&nh, data_end, &icmphdr); - if (eth_type == bpf_htons(ETH_P_IP) && icmp_type == ICMP_ECHO) { - /* Swap IP source and destination */ - swap_src_dst_ipv4(iphdr); - echo_reply = ICMP_ECHOREPLY; - } else if (eth_type == bpf_htons(ETH_P_IPV6) - && icmp_type == ICMPV6_ECHO_REQUEST) { - /* Swap IPv6 source and destination */ - swap_src_dst_ipv6(ipv6hdr); - echo_reply = ICMPV6_ECHO_REPLY; - } else { - goto out; - } - - /* Swap Ethernet source and destination */ - swap_src_dst_mac(eth); - - - /* Patch the packet and update the checksum.*/ - old_csum = icmphdr->cksum; - icmphdr->cksum = 0; - icmphdr_old = *icmphdr; - icmphdr->type = echo_reply; - icmphdr->cksum = icmp_checksum_diff(~old_csum, icmphdr, &icmphdr_old); - - /* Another, less generic, but a bit more efficient way to update the - * checksum is listed below. As only one 16-bit word changed, the sum - * can be patched using this formula: sum' = ~(~sum + ~m0 + m1), where - * sum' is a new sum, sum is an old sum, m0 and m1 are the old and new - * 16-bit words, correspondingly. In the formula above the + operation - * is defined as the following function: - * - * static __always_inline __u16 csum16_add(__u16 csum, __u16 addend) - * { - * csum += addend; - * return csum + (csum < addend); - * } - * - * So an alternative code to update the checksum might look like this: - * - * __u16 m0 = * (__u16 *) icmphdr; - * icmphdr->type = echo_reply; - * __u16 m1 = * (__u16 *) icmphdr; - * icmphdr->checksum = ~(csum16_add(csum16_add(~icmphdr->checksum, ~m0), m1)); - */ - - action = XDP_TX; - -out: - return xdp_stats_record_action(ctx, action); -} - -/* Solution to packet03/assignment-2 */ -SEC("xdp_redirect") -int xdp_redirect_func(struct xdp_md *ctx) -{ - void *data_end = (void *)(long)ctx->data_end; - void *data = (void *)(long)ctx->data; - struct hdr_cursor nh; - struct ethhdr *eth; - int eth_type; - int action = XDP_PASS; - unsigned char dst[ETH_ALEN] = { /* TODO: put your values here */ }; - unsigned ifindex = 0/* TODO: put your values here */; - - /* These keep track of the next header type and iterator pointer */ - nh.pos = data; - - /* Parse Ethernet and IP/IPv6 headers */ - eth_type = parse_ethhdr(&nh, data_end, ð); - if (eth_type == -1) - goto out; - - /* Set a proper destination address */ - memcpy(eth->h_dest, dst, ETH_ALEN); - action = bpf_redirect(ifindex, 0); - -out: - return xdp_stats_record_action(ctx, action); -} - -/* Solution to packet03/assignment-3 */ -SEC("xdp_redirect_map") -int xdp_redirect_map_func(struct xdp_md *ctx) -{ - void *data_end = (void *)(long)ctx->data_end; - void *data = (void *)(long)ctx->data; - struct hdr_cursor nh; - struct ethhdr *eth; - int eth_type; - int action = XDP_PASS; - unsigned char *dst; - - /* These keep track of the next header type and iterator pointer */ - nh.pos = data; - - /* Parse Ethernet and IP/IPv6 headers */ - eth_type = parse_ethhdr(&nh, data_end, ð); - if (eth_type == -1) - goto out; - - /* Do we know where to redirect this packet? */ - dst = bpf_map_lookup_elem(&redirect_params, eth->h_source); - if (!dst) - goto out; - - /* Set a proper destination address */ - memcpy(eth->h_dest, dst, ETH_ALEN); - action = bpf_redirect_map(&tx_port, 0, 0); - -out: - return xdp_stats_record_action(ctx, action); -} - -#ifndef AF_INET -#define AF_INET 2 -#endif -#ifndef AF_INET6 -#define AF_INET6 10 -#endif -#define IPV6_FLOWINFO_MASK bpf_htonl(0x0FFFFFFF) - -/* from include/net/ip.h */ -static __always_inline int ip_decrease_ttl(struct iphdr *iph) -{ - __u32 check = iph->check; - check += bpf_htons(0x0100); - iph->check = (__u16)(check + (check >= 0xFFFF)); - return --iph->ttl; -} - -/* Solution to packet03/assignment-4 */ -/* xdp_router is the name of the xdp program */ -SEC("xdp_router") -int xdp_router_func(struct xdp_md *ctx) -{ - /* this is the packet context*/ - void *data_end = (void *)(long)ctx->data_end; - void *data = (void *)(long)ctx->data; - struct bpf_fib_lookup fib_params = {}; - struct ethhdr *eth = data; - struct ipv6hdr *ip6h; - struct iphdr *iph; - __u16 h_proto; - __u64 nh_off; - int rc; - /* default action is to pass */ - int action = XDP_PASS; - - nh_off = sizeof(*eth); - if (data + nh_off > data_end) { - action = XDP_DROP; - goto out; - } - - /* determine if this is IP4 or IPv6 by looking at the Ethernet protocol field */ - h_proto = eth->h_proto; - if (h_proto == bpf_htons(ETH_P_IP)) { - /* IPv4 part of the code */ - iph = data + nh_off; - - if (iph + 1 > data_end) { - action = XDP_DROP; - goto out; - } - /* as a real router, we need to check the TTL to prevent never ending loops*/ - if (iph->ttl <= 1) - goto out; - - /* populate the fib_params fields to prepare for the lookup */ - fib_params.family = AF_INET; - fib_params.tos = iph->tos; - fib_params.l4_protocol = iph->protocol; - fib_params.sport = 0; - fib_params.dport = 0; - fib_params.tot_len = bpf_ntohs(iph->tot_len); - fib_params.ipv4_src = iph->saddr; - fib_params.ipv4_dst = iph->daddr; - } else if (h_proto == bpf_htons(ETH_P_IPV6)) { - /* IPv6 part of the code */ - struct in6_addr *src = (struct in6_addr *) fib_params.ipv6_src; - struct in6_addr *dst = (struct in6_addr *) fib_params.ipv6_dst; - - ip6h = data + nh_off; - if (ip6h + 1 > data_end) { - action = XDP_DROP; - goto out; - } - /* as a real router, we need to check the TTL to prevent never ending loops*/ - if (ip6h->hop_limit <= 1) - goto out; - - /* populate the fib_params fields to prepare for the lookup */ - fib_params.family = AF_INET6; - fib_params.flowinfo = *(__be32 *) ip6h & IPV6_FLOWINFO_MASK; - fib_params.l4_protocol = ip6h->nexthdr; - fib_params.sport = 0; - fib_params.dport = 0; - fib_params.tot_len = bpf_ntohs(ip6h->payload_len); - *src = ip6h->saddr; - *dst = ip6h->daddr; - } else { - goto out; - } - - fib_params.ifindex = ctx->ingress_ifindex; - - /* this is where the FIB lookup happens. If the lookup is successful */ - /* it will populate the fib_params.ifindex with the egress interface index */ - - rc = bpf_fib_lookup(ctx, &fib_params, sizeof(fib_params), 0); - switch (rc) { - case BPF_FIB_LKUP_RET_SUCCESS: /* lookup successful */ - /* we are a router, so we need to decrease the ttl */ - if (h_proto == bpf_htons(ETH_P_IP)) - ip_decrease_ttl(iph); - else if (h_proto == bpf_htons(ETH_P_IPV6)) - ip6h->hop_limit--; - /* set the correct new source and destionation mac addresses */ - /* can be found in fib_params.dmac and fib_params.smac */ - memcpy(eth->h_dest, fib_params.dmac, ETH_ALEN); - memcpy(eth->h_source, fib_params.smac, ETH_ALEN); - /* and done, now we set the action to bpf_redirect_map with fib_params.ifindex which is the egress port as paramater */ - action = bpf_redirect_map(&tx_port, fib_params.ifindex, 0); - break; - case BPF_FIB_LKUP_RET_BLACKHOLE: /* dest is blackholed; can be dropped */ - case BPF_FIB_LKUP_RET_UNREACHABLE: /* dest is unreachable; can be dropped */ - case BPF_FIB_LKUP_RET_PROHIBIT: /* dest not allowed; can be dropped */ - action = XDP_DROP; - break; - case BPF_FIB_LKUP_RET_NOT_FWDED: /* packet is not forwarded */ - case BPF_FIB_LKUP_RET_FWD_DISABLED: /* fwding is not enabled on ingress */ - case BPF_FIB_LKUP_RET_UNSUPP_LWT: /* fwd requires encapsulation */ - case BPF_FIB_LKUP_RET_NO_NEIGH: /* no neighbor entry for nh */ - case BPF_FIB_LKUP_RET_FRAG_NEEDED: /* fragmentation required to fwd */ - /* PASS */ - break; - } - -out: - /* and done, update stats and return action */ - return xdp_stats_record_action(ctx, action); -} - -SEC("xdp_pass") -int xdp_pass_func(struct xdp_md *ctx) -{ - return xdp_stats_record_action(ctx, XDP_PASS); -} - -char _license[] SEC("license") = "GPL"; diff --git a/src/xdp/xdp_prog_user.c b/src/xdp/xdp_prog_user.c deleted file mode 100644 index c47d2977d..000000000 --- a/src/xdp/xdp_prog_user.c +++ /dev/null @@ -1,182 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - -static const char *__doc__ = "XDP redirect helper\n" - " - Allows to populate/query tx_port and redirect_params maps\n"; - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <errno.h> -#include <getopt.h> -#include <stdbool.h> - -#include <locale.h> -#include <unistd.h> -#include <time.h> - -#include <bpf/bpf.h> -#include <bpf/libbpf.h> - -#include <net/if.h> -#include <linux/if_ether.h> -#include <linux/if_link.h> /* depend on kernel-headers installed */ - -#include "common/common_params.h" -#include "common/common_user_bpf_xdp.h" -#include "common/common_libbpf.h" - -#include "common/xdp_stats_kern_user.h" - -static const struct option_wrapper long_options[] = { - - {{"help", no_argument, NULL, 'h' }, - "Show help", false}, - - {{"dev", required_argument, NULL, 'd' }, - "Operate on device <ifname>", "<ifname>", true}, - - {{"redirect-dev", required_argument, NULL, 'r' }, - "Redirect to device <ifname>", "<ifname>", true}, - - {{"src-mac", required_argument, NULL, 'L' }, - "Source MAC address of <dev>", "<mac>", true }, - - {{"dest-mac", required_argument, NULL, 'R' }, - "Destination MAC address of <redirect-dev>", "<mac>", true }, - - {{"quiet", no_argument, NULL, 'q' }, - "Quiet mode (no output)"}, - - {{0, 0, NULL, 0 }, NULL, false} -}; - -static int parse_u8(char *str, unsigned char *x) -{ - unsigned long z; - - z = strtoul(str, 0, 16); - if (z > 0xff) - return -1; - - if (x) - *x = z; - - return 0; -} - -static int parse_mac(char *str, unsigned char mac[ETH_ALEN]) -{ - if (parse_u8(str, &mac[0]) < 0) - return -1; - if (parse_u8(str + 3, &mac[1]) < 0) - return -1; - if (parse_u8(str + 6, &mac[2]) < 0) - return -1; - if (parse_u8(str + 9, &mac[3]) < 0) - return -1; - if (parse_u8(str + 12, &mac[4]) < 0) - return -1; - if (parse_u8(str + 15, &mac[5]) < 0) - return -1; - - return 0; -} - -static int write_iface_params(int map_fd, unsigned char *src, unsigned char *dest) -{ - if (bpf_map_update_elem(map_fd, src, dest, 0) < 0) { - fprintf(stderr, - "WARN: Failed to update bpf map file: err(%d):%s\n", - errno, strerror(errno)); - return -1; - } - - printf("forward: %02x:%02x:%02x:%02x:%02x:%02x -> %02x:%02x:%02x:%02x:%02x:%02x\n", - src[0], src[1], src[2], src[3], src[4], src[5], - dest[0], dest[1], dest[2], dest[3], dest[4], dest[5] - ); - - return 0; -} - -#ifndef PATH_MAX -#define PATH_MAX 4096 -#endif - -const char *pin_basedir = "/sys/fs/bpf"; - -int main(int argc, char **argv) -{ - int i; - int len; - int map_fd; - bool redirect_map; - char pin_dir[PATH_MAX]; - unsigned char src[ETH_ALEN]; - unsigned char dest[ETH_ALEN]; - - struct config cfg = { - .ifindex = -1, - .redirect_ifindex = -1, - }; - - /* Cmdline options can change progsec */ - parse_cmdline_args(argc, argv, long_options, &cfg, __doc__); - - redirect_map = (cfg.ifindex > 0) && (cfg.redirect_ifindex > 0); - - if (cfg.redirect_ifindex > 0 && cfg.ifindex == -1) { - fprintf(stderr, "ERR: required option --dev missing\n\n"); - usage(argv[0], __doc__, long_options, (argc == 1)); - return EXIT_FAIL_OPTION; - } - - len = snprintf(pin_dir, PATH_MAX, "%s/%s", pin_basedir, cfg.ifname); - if (len < 0) { - fprintf(stderr, "ERR: creating pin dirname\n"); - return EXIT_FAIL_OPTION; - } - - if (parse_mac(cfg.src_mac, src) < 0) { - fprintf(stderr, "ERR: can't parse mac address %s\n", cfg.src_mac); - return EXIT_FAIL_OPTION; - } - - if (parse_mac(cfg.dest_mac, dest) < 0) { - fprintf(stderr, "ERR: can't parse mac address %s\n", cfg.dest_mac); - return EXIT_FAIL_OPTION; - } - - /* Open the tx_port map corresponding to the cfg.ifname interface */ - map_fd = open_bpf_map_file(pin_dir, "tx_port", NULL); - if (map_fd < 0) { - return EXIT_FAIL_BPF; - } - - printf("map dir: %s\n", pin_dir); - - if (redirect_map) { - /* setup a virtual port for the static redirect */ - i = 0; - bpf_map_update_elem(map_fd, &i, &cfg.redirect_ifindex, 0); - printf("redirect from ifnum=%d to ifnum=%d\n", cfg.ifindex, cfg.redirect_ifindex); - - /* Open the redirect_params map */ - map_fd = open_bpf_map_file(pin_dir, "redirect_params", NULL); - if (map_fd < 0) { - return EXIT_FAIL_BPF; - } - - /* Setup the mapping containing MAC addresses */ - if (write_iface_params(map_fd, src, dest) < 0) { - fprintf(stderr, "can't write iface params\n"); - return 1; - } - } else { - /* setup 1-1 mapping for the dynamic router */ - for (i = 1; i < 256; ++i) - bpf_map_update_elem(map_fd, &i, &i, 0); - } - - return EXIT_OK; -} |