summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rwxr-xr-xsrc/conf_mode/interface-bonding.py56
-rwxr-xr-xsrc/conf_mode/interface-bridge.py35
2 files changed, 41 insertions, 50 deletions
diff --git a/src/conf_mode/interface-bonding.py b/src/conf_mode/interface-bonding.py
index 2ec764965..81667289d 100755
--- a/src/conf_mode/interface-bonding.py
+++ b/src/conf_mode/interface-bonding.py
@@ -85,12 +85,6 @@ def apply_vlan_config(vlan, config):
if type(vlan) != type(EthernetIf("lo")):
raise TypeError()
- # Configure interface address(es)
- for addr in config['address_remove']:
- vlan.del_addr(addr)
- for addr in config['address']:
- vlan.add_addr(addr)
-
# update interface description used e.g. within SNMP
vlan.ifalias = config['description']
# ignore link state changes
@@ -107,6 +101,14 @@ def apply_vlan_config(vlan, config):
else:
vlan.state = 'up'
+ # Configure interface address(es)
+ # - not longer required addresses get removed first
+ # - newly addresses will be added second
+ for addr in config['address_remove']:
+ vlan.del_addr(addr)
+ for addr in config['address']:
+ vlan.add_addr(addr)
+
def get_config():
# initialize kernel module if not loaded
@@ -139,6 +141,11 @@ def get_config():
if conf.exists('address'):
bond['address'] = conf.return_values('address')
+ # get interface addresses (currently effective) - to determine which
+ # address is no longer valid and needs to be removed from the bond
+ eff_addr = conf.return_effective_values('address')
+ bond['address_remove'] = list_diff(eff_addr, bond['address'])
+
# ARP link monitoring frequency in milliseconds
if conf.exists('arp-monitor interval'):
bond['arp_mon_intvl'] = int(conf.return_value('arp-monitor interval'))
@@ -209,12 +216,6 @@ def get_config():
if conf.exists('member interface'):
bond['member'] = conf.return_values('member interface')
- # get interface addresses (currently effective) - to determine which
- # address is no longer valid and needs to be removed from the bond
- eff_addr = conf.return_effective_values('address')
- act_addr = conf.return_values('address')
- bond['address_remove'] = list_diff(eff_addr, act_addr)
-
# Primary device interface
if conf.exists('primary'):
bond['primary'] = conf.return_value('primary')
@@ -314,6 +315,7 @@ def apply(bond):
b = BondIf(bond['intf'])
if bond['deleted']:
+ #
# delete bonding interface
b.remove()
else:
@@ -326,12 +328,6 @@ def apply(bond):
for intf in b.get_slaves():
b.del_port(intf)
- # Configure interface address(es)
- for addr in bond['address_remove']:
- b.del_addr(addr)
- for addr in bond['address']:
- b.add_addr(addr)
-
# ARP link monitoring frequency
b.arp_interval = bond['arp_mon_intvl']
# reset miimon on arp-montior deletion
@@ -348,8 +344,8 @@ def apply(bond):
# from the kernel side this looks valid to me. We won't run into an error
# when a user added manual adresses which would result in having more
# then 16 adresses in total.
- cur_addr = list(map(str, b.arp_ip_target.split()))
- for addr in cur_addr:
+ arp_tgt_addr = list(map(str, b.arp_ip_target.split()))
+ for addr in arp_tgt_addr:
b.arp_ip_target = '-' + addr
# Add configured ARP target addresses
@@ -391,6 +387,20 @@ def apply(bond):
for intf in bond['member']:
b.add_port(intf)
+ # As the bond interface is always disabled first when changing
+ # parameters we will only re-enable the interface if it is not
+ # administratively disabled
+ if not bond['disable']:
+ b.state = 'up'
+
+ # Configure interface address(es)
+ # - not longer required addresses get removed first
+ # - newly addresses will be added second
+ for addr in bond['address_remove']:
+ b.del_addr(addr)
+ for addr in bond['address']:
+ b.add_addr(addr)
+
# remove no longer required service VLAN interfaces (vif-s)
for vif_s in bond['vif_s_remove']:
b.del_vlan(vif_s)
@@ -420,12 +430,6 @@ def apply(bond):
vlan = b.add_vlan(vif['id'])
apply_vlan_config(vlan, vif)
- # As the bond interface is always disabled first when changing
- # parameters we will only re-enable the interface if it is not
- # administratively disabled
- if not bond['disable']:
- b.state = 'up'
-
return None
if __name__ == '__main__':
diff --git a/src/conf_mode/interface-bridge.py b/src/conf_mode/interface-bridge.py
index b165428ee..8996fceec 100755
--- a/src/conf_mode/interface-bridge.py
+++ b/src/conf_mode/interface-bridge.py
@@ -61,9 +61,7 @@ def get_config():
# Check if bridge has been removed
if not conf.exists('interfaces bridge ' + bridge['intf']):
bridge['deleted'] = True
- # we should not bail out early here b/c we should
- # find possible DHCP interfaces later on.
- # DHCP interfaces invoke dhclient which should be stopped, too
+ return bridge
# set new configuration level
conf.set_level('interfaces bridge ' + bridge['intf'])
@@ -72,6 +70,11 @@ def get_config():
if conf.exists('address'):
bridge['address'] = conf.return_values('address')
+ # Determine interface addresses (currently effective) - to determine which
+ # address is no longer valid and needs to be removed from the bridge
+ eff_addr = conf.return_effective_values('address')
+ bridge['address_remove'] = list_diff(eff_addr, bridge['address'])
+
# retrieve aging - how long addresses are retained
if conf.exists('aging'):
bridge['aging'] = int(conf.return_value('aging'))
@@ -137,12 +140,6 @@ def get_config():
act_intf = conf.list_nodes('member interface')
bridge['member_remove'] = list_diff(eff_intf, act_intf)
- # Determine interface addresses (currently effective) - to determine which
- # address is no longer valid and needs to be removed from the bridge
- eff_addr = conf.return_effective_values('address')
- act_addr = conf.return_values('address')
- bridge['address_remove'] = list_diff(eff_addr, act_addr)
-
# Priority for this bridge
if conf.exists('priority'):
bridge['priority'] = int(conf.return_value('priority'))
@@ -225,23 +222,13 @@ def apply(bridge):
if bridge['disable']:
br.state = 'down'
- # remove configured network interface addresses/DHCP(v6) configuration
+ # Configure interface address(es)
+ # - not longer required addresses get removed first
+ # - newly addresses will be added second
for addr in bridge['address_remove']:
- if addr == 'dhcp':
- br.del_dhcp()
- elif addr == 'dhcpv6':
- br.del_dhcpv6()
- else:
- br.del_addr(addr)
-
- # add configured network interface addresses/DHCP(v6) configuration
+ br.del_addr(addr)
for addr in bridge['address']:
- if addr == 'dhcp':
- br.set_dhcp()
- elif addr == 'dhcpv6':
- br.set_dhcpv6()
- else:
- br.add_addr(addr)
+ br.add_addr(addr)
# configure additional bridge member options
for member in bridge['member']: