diff options
Diffstat (limited to 'src')
| -rwxr-xr-x | src/conf_mode/service-pppoe.py | 297 |
1 files changed, 25 insertions, 272 deletions
diff --git a/src/conf_mode/service-pppoe.py b/src/conf_mode/service-pppoe.py index 22250d18b..afcc5ba99 100755 --- a/src/conf_mode/service-pppoe.py +++ b/src/conf_mode/service-pppoe.py @@ -1,6 +1,6 @@ #!/usr/bin/env python3 # -# Copyright (C) 2018 VyOS maintainers and contributors +# Copyright (C) 2018-2020 VyOS maintainers and contributors # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License version 2 or later as @@ -13,19 +13,18 @@ # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -# -# -import sys import os import re import subprocess -import jinja2 -import socket -import time -import syslog as sl + +from jinja2 import FileSystemLoader, Environment +from socket import socket, AF_INET, SOCK_STREAM +from sys import exit +from time import sleep from vyos.config import Config +from vyos.defaults import directories as vyos_data_dir from vyos import ConfigError pidfile = r'/var/run/accel_pppoe.pid' @@ -38,282 +37,26 @@ pppoe_conf = pppoe_cnf_dir + '/pppoe.config' # config path creation if not os.path.exists(pppoe_cnf_dir): os.makedirs(pppoe_cnf_dir) - sl.syslog(sl.LOG_NOTICE, pppoe_cnf_dir + " created") - -pppoe_config = ''' -### generated by accel_pppoe.py ### -[modules] -log_syslog -pppoe -{% if authentication['mode'] == 'radius' %} -radius -{% endif %} -ippool -{% if ppp_options['ipv6'] != 'deny' %} -ipv6pool -ipv6_nd -ipv6_dhcp -{% endif %} -chap-secrets -auth_pap -auth_chap_md5 -auth_mschap_v1 -auth_mschap_v2 -#pppd_compat -shaper -{% if snmp == 'enable' or snmp == 'enable-ma' %} -net-snmp -{% endif %} -{% if limits %} -connlimit -{% endif %} - -[core] -thread-count={{thread_cnt}} - -[log] -syslog=accel-pppoe,daemon -copy=1 -level=5 - -{% if snmp == 'enable-ma' %} -[snmp] -master=1 -{% endif -%} - -[client-ip-range] -disable - -{% if ppp_gw %} -[ip-pool] -gw-ip-address={{ppp_gw}} -{% if client_ip_pool %} -{{client_ip_pool}} -{% endif -%} - -{% if client_ip_subnets %} -{% for sn in client_ip_subnets %} -{{sn}} -{% endfor %} -{% endif %} -{% endif -%} - -{% if client_ipv6_pool %} -[ipv6-pool] -{% for prfx in client_ipv6_pool['prefix']: %} -{{prfx}} -{% endfor %} -{% for prfx in client_ipv6_pool['delegate-prefix']: %} -delegate={{prfx}} -{% endfor %} -{% endif %} - -{% if dns %} -[dns] -{% if dns[0] %} -dns1={{dns[0]}} -{% endif -%} -{% if dns[1] %} -dns2={{dns[1]}} -{% endif -%} -{% endif %} - -{% if dnsv6 %} -[ipv6-dns] -{% for srv in dnsv6: %} -{{srv}} -{% endfor %} -{% endif %} - -{% if wins %} -[wins] -{% if wins[0] %} -wins1={{wins[0]}} -{% endif %} -{% if wins[1] %} -wins2={{wins[1]}} -{% endif -%} -{% endif -%} - -{% if authentication['mode'] == 'local' %} -[chap-secrets] -chap-secrets=/etc/accel-ppp/pppoe/chap-secrets -{% endif -%} - -{% if authentication['mode'] == 'radius' %} -[radius] -{% for rsrv in authentication['radiussrv']: %} -server={{rsrv}},{{authentication['radiussrv'][rsrv]['secret']}},\ -req-limit={{authentication['radiussrv'][rsrv]['req-limit']}},\ -fail-time={{authentication['radiussrv'][rsrv]['fail-time']}} -{% endfor %} -{% if authentication['radiusopt']['timeout'] %} -timeout={{authentication['radiusopt']['timeout']}} -{% endif %} -{% if authentication['radiusopt']['acct-timeout'] %} -acct-timeout={{authentication['radiusopt']['acct-timeout']}} -{% endif %} -{% if authentication['radiusopt']['max-try'] %} -max-try={{authentication['radiusopt']['max-try']}} -{% endif %} -{% if authentication['radiusopt']['nas-id'] %} -nas-identifier={{authentication['radiusopt']['nas-id']}} -{% endif %} -{% if authentication['radiusopt']['nas-ip'] %} -nas-ip-address={{authentication['radiusopt']['nas-ip']}} -{% endif -%} -{% if authentication['radiusopt']['dae-srv'] %} -dae-server={{authentication['radiusopt']['dae-srv']['ip-addr']}}:\ -{{authentication['radiusopt']['dae-srv']['port']}},\ -{{authentication['radiusopt']['dae-srv']['secret']}} -{% endif -%} -gw-ip-address={{ppp_gw}} -verbose=1 - -{% if authentication['radiusopt']['shaper'] %} -[shaper] -verbose=1 -attr={{authentication['radiusopt']['shaper']['attr']}} -{% if authentication['radiusopt']['shaper']['vendor'] %} -vendor={{authentication['radiusopt']['shaper']['vendor']}} -{% endif -%} -{% endif -%} -{% endif %} - -[ppp] -verbose=1 -check-ip=1 -{% if not sesscrtl == 'disable' %} -single-session={{sesscrtl}} -{% endif -%} -{% if ppp_options['ccp'] %} -ccp=1 -{% endif %} -{% if ppp_options['min-mtu'] %} -min-mtu={{ppp_options['min-mtu']}} -{% else %} -min-mtu={{mtu}} -{% endif %} -{% if ppp_options['mru'] %} -mru={{ppp_options['mru']}} -{% endif %} -{% if ppp_options['mppe'] %} -mppe={{ppp_options['mppe']}} -{% else %} -mppe=prefer -{% endif %} -{% if ppp_options['lcp-echo-interval'] %} -lcp-echo-interval={{ppp_options['lcp-echo-interval']}} -{% else %} -lcp-echo-interval=30 -{% endif %} -{% if ppp_options['lcp-echo-timeout'] %} -lcp-echo-timeout={{ppp_options['lcp-echo-timeout']}} -{% endif %} -{% if ppp_options['lcp-echo-failure'] %} -lcp-echo-failure={{ppp_options['lcp-echo-failure']}} -{% else %} -lcp-echo-failure=3 -{% endif %} -{% if ppp_options['ipv4'] %} -ipv4={{ppp_options['ipv4']}} -{% endif %} -{% if client_ipv6_pool %} -ipv6=allow -{% endif %} - -{% if ppp_options['ipv6'] %} -ipv6={{ppp_options['ipv6']}} -{% if ppp_options['ipv6-intf-id'] %} -ipv6-intf-id={{ppp_options['ipv6-intf-id']}} -{% endif %} -{% if ppp_options['ipv6-peer-intf-id'] %} -ipv6-peer-intf-id={{ppp_options['ipv6-peer-intf-id']}} -{% endif %} -{% if ppp_options['ipv6-accept-peer-intf-id'] %} -ipv6-accept-peer-intf-id={{ppp_options['ipv6-accept-peer-intf-id']}} -{% endif %} -{% endif %} -mtu={{mtu}} - -[pppoe] -verbose=1 -{% if concentrator %} -ac-name={{concentrator}} -{% endif %} -{% if interface %} -{% for int in interface %} -interface={{int}} -{% if interface[int]['vlans'] %} -vlan-mon={{int}},{{interface[int]['vlans']|join(',')}} -interface=re:{{int}}\.\d+ -{% endif %} -{% endfor -%} -{% endif -%} - -{% if svc_name %} -service-name={{svc_name|join(',')}} -{% endif -%} - -{% if pado_delay %} -pado-delay={{pado_delay}} -{% endif %} - -{% if limits %} -[connlimit] -limit={{limits['conn-limit']}} -burst={{limits['burst']}} -timeout={{limits['timeout']}} -{% endif %} - -[cli] -tcp=127.0.0.1:2001 -''' - -# pppoe chap secrets -chap_secrets_conf = ''' -# username server password acceptable local IP addresses shaper -{% for user in authentication['local-users'] %} -{% if authentication['local-users'][user]['state'] == 'enabled' %} -{% if (authentication['local-users'][user]['upload']) and (authentication['local-users'][user]['download']) %} -{{user}}\t*\t{{authentication['local-users'][user]['passwd']}}\t{{authentication['local-users'][user]['ip']}}\t\ -{{authentication['local-users'][user]['download']}}/{{authentication['local-users'][user]['upload']}} -{% else %} -{{user}}\t*\t{{authentication['local-users'][user]['passwd']}}\t{{authentication['local-users'][user]['ip']}} -{% endif %} -{% endif %} -{% endfor %} -''' + # # depending on hw and threads, daemon needs a little to start # if it takes longer than 100 * 0.5 secs, exception is being raised # not sure if that's the best way to check it, but it worked so far quite well # - - def _chk_con(): cnt = 0 - s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + s = socket(AF_INET, SOCK_STREAM) while True: try: s.connect(("127.0.0.1", 2001)) break except ConnectionRefusedError: - time.sleep(0.5) + sleep(0.5) cnt += 1 if cnt == 100: raise("failed to start pppoe server") -def _write_chap_secrets(c): - tmpl = jinja2.Template(chap_secrets_conf, trim_blocks=True) - chap_secrets_txt = tmpl.render(c) - old_umask = os.umask(0o077) - open(chap_secrets, 'w').write(chap_secrets_txt) - os.umask(old_umask) - sl.syslog(sl.LOG_NOTICE, chap_secrets + ' written') - - def _accel_cmd(cmd=''): if not cmd: return None @@ -640,6 +383,11 @@ def generate(c): if c == None: return None + # Prepare Jinja2 template loader from files + tmpl_path = os.path.join(vyos_data_dir['data'], 'templates', 'pppoe-server') + fs_loader = FileSystemLoader(tmpl_path) + env = Environment(loader=fs_loader, trim_blocks=True) + # accel-cmd reload doesn't work so any change results in a restart of the # daemon try: @@ -653,12 +401,18 @@ def generate(c): else: c['thread_cnt'] = int(os.cpu_count() / 2) - tmpl = jinja2.Template(pppoe_config, trim_blocks=True) + tmpl = env.get_template('pppoe.config.tmpl') config_text = tmpl.render(c) - open(pppoe_conf, 'w').write(config_text) + with open(pppoe_conf, 'w') as f: + f.write(config_text) if c['authentication']['local-users']: - _write_chap_secrets(c) + tmpl = env.get_template('chap-secrets.tmpl') + chap_secrets_txt = tmpl.render(c) + old_umask = os.umask(0o077) + with open(chap_secrets, 'w') as f: + f.write(chap_secrets_txt) + os.umask(old_umask) return c @@ -680,7 +434,6 @@ def apply(c): raise ConfigError('accel-pppd failed to start') else: _accel_cmd('restart') - sl.syslog(sl.LOG_NOTICE, "reloading config via daemon restart") if __name__ == '__main__': @@ -691,4 +444,4 @@ if __name__ == '__main__': apply(c) except ConfigError as e: print(e) - sys.exit(1) + exit(1) |