Age | Commit message (Collapse) | Author |
|
As there has been no route to the configured syslog servers, smoketests produced:
rsyslogd: omfwd: socket 8: error 101 sending via udp: Network is unreachable
Rather use some fake syslog servers from 127.0.0.0/8 which are directly
connected and we do not need to look up a route, which will suppress the above
error message.
(cherry picked from commit 744ecfe60ed3633775feeb3da767a88709fd626c)
|
|
T6605: restore configd error formatting to be consistent with CLI (backport #3868)
|
|
vxlan: T6505: Support VXLAN VLAN-VNI range mapping in CLI (backport #3756)
|
|
(cherry picked from commit 115e99630a317cab62c6f99e0461f6ce2c1edaf3)
|
|
by TuneD (#3863)
(cherry picked from commit 7b82e4005724683c6311fab22358746f2cca4c1b)
Co-authored-by: Nataliia Solomko <natalirs1985@gmail.com>
|
|
(cherry picked from commit 645f24908c9b338adc56ecc83f8c44d0b0206550)
|
|
Debian: T6598: depend on podman version >=4.9.5 (backport #3873)
|
|
(cherry picked from commit b9daaaa38abc08d27158ea44e016752b3cb45400)
|
|
interface: T6592: remove interface from conntrack ct_iface_map on deletion (backport #3857)
|
|
Only some (e.g. ethernet or wireguard) interfaces validate if the supplied VRF
actually exists. If this is not validated, one can pass an invalid VRF to the
system which generates an OSError exception.
To reproduce
set interfaces vxlan vxlan1 vni 1000
set interfaces vxlan vxlan1 remote 1.2.3.4
set interfaces vxlan vxlan1 vrf smoketest
results in
OSError: [Errno 255] failed to run command: ip link set dev vxlan1 master smoketest_mgmt
This commit adds the missing verify_vrf() call to the missing interface types
and an appropriate smoketest for all interfaces supporting VRF assignment.
(cherry picked from commit dd0ebffa33728e452ac6e11737c2283f0e390359)
Co-authored-by: Christian Breunig <christian@breunig.cc>
|
|
deletion
Now that interfaces are deleted from ct_iface_map during deletion it's time to
also add a smoketest ensuring there is no entry in the ct_iface_map once an
interface was deleted from the CLI.
(cherry picked from commit 1c42ee9d16dd49fff2cbde652bf24a38f364526c)
|
|
We always have had stale interface entries in the ct_iface_map of nftables/
conntrack for any interface that once belonged to a VRF.
This commit will always clean the nftables interface map when the interface
is deleted from the system.
(cherry picked from commit 17c12bde5c6f314311e7524842fd1ddc254009b4)
|
|
op_mode: T6593: Release DHCP interface does not work (backport #3861)
|
|
op_mode: T6596: pppoe operation command failed (backport #3860)
|
|
(cherry picked from commit 92461c35c7ef131940c885aca894a2d8b3c89592)
|
|
(cherry picked from commit 79407cd5bbec3194a9b6542418229b33eab05121)
|
|
smoketest: T6600: ospf: enable MPLS LDP on dummy interfaces (backport #3838)
|
|
(cherry picked from commit 71926f64385d7ab66431c60afa1fc8554ad7e2dc)
|
|
T6594: Add missed pppd_compat module (backport #3832)
|
|
(cherry picked from commit 8c8054ad5410e8aedf6ab7a0702b317872d4fd41)
|
|
(cherry picked from commit 440a3e6b89748bfd861f580fc8c4f41b58c6cec2)
|
|
(cherry picked from commit ef50cd9954a2d6eb2a041c26a0bb8ea0758b1f17)
|
|
(cherry picked from commit b92bc209cc1d6ed54a5fa052e0c27c54488ae955)
|
|
wireless: T6597: improve hostapd startup and corresponding smoketests (backport #3833)
|
|
This was found during smoketesting as thoase started to repeadingly fail in the last weeks
File "/usr/libexec/vyos/tests/smoke/cli/test_interfaces_wireless.py", line 534, in test_wireless_security_station_address
self.assertTrue(process_named_running('hostapd'))
AssertionError: None is not true
Digging into this revealed that this is NOT related to the smoketest coding but
to hostapd/systemd instead. With a configured WIFI interface and calling:
"sudo systemctl reload-or-restart hostapd@wlan1" multiple times in a short
period caused systemd to report:
"Jul 18 16:15:32 systemd[1]: hostapd@wlan1.service: Deactivated successfully."
According to the internal systemd logic used in our version this is explained by:
/* If there's a stop job queued before we enter the DEAD state, we shouldn't act on Restart=, in order to not
* undo what has already been enqueued. */
if (unit_stop_pending(UNIT(s)))
allow_restart = false;
if (s->result == SERVICE_SUCCESS)
s->result = f;
if (s->result == SERVICE_SUCCESS) {
unit_log_success(UNIT(s));
end_state = SERVICE_DEAD;`
Where unit_log_success() generates the log message in question.
Improve the restart login in the wireless interface script and an upgrade to
hostapd solved the issue.
(cherry picked from commit a67f49d99eda00998c425f9a663e138dbd0f7755)
|
|
(cherry picked from commit 8bf6687b5276589e64988c3c54dbf61a628ee2a0)
|
|
(cherry picked from commit f6485f7df8713298d81ec0d45c548417db111523)
|
|
(cherry picked from commit 11b273108d78ab1588be3c077f40b2ac876369a4)
|
|
wireless: T6320: Add 802.11ax at 6GHz to VyOS (backport #3524)
|
|
Authored-By: Alain Lamar <alain_lamar@yahoo.de>
(cherry picked from commit d5e988ba2d0fa0189feff22374c9b46eb49e2e79)
|
|
openvpn: T3834: verify() is not allowed to change anything on the system (backport #3850)
|
|
wireless: T6425: Fixing VHT beamforming for 802.11ac (backport #3576)
|
|
Commit e3c71af1466 ("remove secrets file if the tunnel is deleted and fix
opmode commands") added a code path into verify() which removed files on the
system if TOTP was not defined.
This commit moves the code path to the appropriate generate() function.
(cherry picked from commit 40c835992db9217f48e54dbbf15a7fbf1dcba482)
|
|
Commit 9e22ab6b2a ("wireless: T6318: move country-code to a system wide
configuration") removed the per wifi interface setting for a country-code. This
commit adjust the smoketests to the new design.
(cherry picked from commit 312273c9569d973c510d871adb941709804d8868)
|
|
(cherry picked from commit 578fbe0eb436697132e5a738fec5a4ac61ced8da)
|
|
(cherry picked from commit f75f0f9c94472f46e056808c3ac6aba809c090f0)
|
|
T6599: ipsec: support disabling rekey of CHILD_SA, converge and fix defaults (backport #3841)
|
|
(cherry picked from commit 23a3419d512139650cfe3dc76759b370b0c0c3d6)
|
|
Also adds support for life_bytes, life_packets, and DPD for
remote-access connections. Changes behavior of remote-access esp-group
lifetime setting to have parity with site-to-site connections.
(cherry picked from commit fd5d7ff0b4fd69b248ecb29c6ec1f3cf844c41cf)
|
|
interfaces: T6592: moving an interface between VRF instances failed (backport #3834)
|
|
Remove unused import (left over) from commit 36f3791e0 ("utils: migrate to new
get_vrf_tableid() helper")
(cherry picked from commit b551f542c5c906c901e3be37ad3fd68c8248473d)
|
|
Commit 452068ce7 ("interfaces: T6592: moving an interface between VRF instances
failed") introduced a new helper to retrieve the VRF table ID from the Kernel.
This commit migrates the old code path where the individual fields got queried
to the new helper vyos.utils.network.get_vrf_tableid().
(cherry picked from commit 36f3791e0c15267483d59a3bb74465811d08df88)
|
|
To reproduce:
set vrf name mgmt table '150'
set vrf name no-mgmt table '151'
set interfaces ethernet eth2 vrf 'mgmt'
commit
set interfaces ethernet eth2 vrf no-mgmt
commit
This resulted in an error while interacting with nftables:
[Errno 1] failed to run command: nft add element inet vrf_zones ct_iface_map { "eth2" : 151 }
The reason is that the old mapping entry still exists and was not removed.
This commit adds a new utility function get_vrf_tableid() and compares the
current and new VRF table IDs assigned to an interface. If the IDs do not
match, the nftables ct_iface_map entry is removed before the new entry is added.
(cherry picked from commit 452068ce78581bb6fba2df4dba197e95b9aeb33d)
|
|
(cherry picked from commit e858d96a3fbc1ae4719a50ee67df02b2f256b40f)
Co-authored-by: khramshinr <khramshinr@gmail.com>
|
|
openvpn: T6591: deprecate OpenVPN server net30 topology (backport #3825)
|
|
(cherry picked from commit e2b05343b30d2f989968532106e792cbaf75ecf6)
|
|
configdep: T6559: fix regression in dependent script error under configd (backport #3813)
|
|
op-mode: T6577: create generic service restart helper to work with the API (backport #3817)
|
|
Right now we have multiple restart helpers (e.g. dhcp server, ssh, ntp) that
all do the same (more or less):
* Check if service is configured on CLI
* Restart if configured
* Error out if unconfigured
This is not available via the op-mode API. Create a new restart.py op-mode
helper that takes the service name and possible VRF as argument so it's also
exposed via API.
(cherry picked from commit c74ae852152b0c3c3f00a1847d081d28f500e178)
|
|
(cherry picked from commit ad43aa885a8ef689da212088d6ebb37c32d72883)
|