summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-06op-comm: ospf : error for ospf neighbor address commandsrividya0208
Error received when executed the sh ip ospf neighbor address 33.33.33.33 % Unknown command: sh ip ospf neighbor address 33.33.33.33
2022-04-06smoketest: vrf: T4331: IPv6 link-local addresses not configured for ↵Christian Poessinger
interface in VRF
2022-04-06dns: forwarding: T3804: fix warning message about "system name-server"Christian Poessinger
2022-04-05Merge pull request #1270 from sever-sever/T4331Christian Poessinger
interfaces: T4331: Fix assign link-local static IPv6 addr to vrf
2022-04-05interfaces: T4331: Fix assign link-local static IPv6 addr to vrfViacheslav Hletenko
If we have link-local static address and vrf, for example: set interfaces ethernet eth2 address 'fe80::5200:ff:fe55:222/64' set interfaces ethernet eth2 vrf 'foo' This IPv6 address was assigned before vrf, as result after attaching the intreface to vrf we lose this static linklocal address DEBUG/IFCONFIG cmd 'ip addr add fe80::5200:ff:fe55:222/64 dev eth2' DEBUG/IFCONFIG cmd 'ip link set dev eth2 master foo' DEBUG/IFCONFIG cmd 'ip addr add fe80::5208:ff:fe13:2/64 dev eth2' This commit fixes this, the address is assigned after vrf assign
2022-04-05dns: forwarding: T3804: bugfix DHCP name-servers used for recursionChristian Poessinger
Commit 2ecf7a9f9c ('name-server: T3804: merge "system name-servers-dhcp" into "system name-server"') missed out an old dictionary key "system_name_server_dhcp" and thus system nameservers configured via DHCP did not get used for the DNS forwar recursor.
2022-04-04login: T4341: busy wait on userdel(8) until the account was deleted successfullyChristian Poessinger
2022-04-04smoketest: login: verify test accounts are properly deletedChristian Poessinger
2022-04-04login: T4341: disable user account prior to deletionChristian Poessinger
2022-04-04smoketest: ssh: verify SSH service is stopped on removalChristian Poessinger
2022-04-04smoketest: ssh: verify login of valid and invalid test userChristian Poessinger
In order to test for proper system authentication and security setup a new testcase is added which performs an SSH login and command execution with a predefined user. The result (output of uname -a) must match the output if the command is run natively. We also try to login as an invalid user - this is not allowed to work.
2022-04-04wifi: T4339: tab-completion results in "No such file or directory"Christian Poessinger
2022-04-04wwan: T4339: tab-completion results in "No such file or directory"Christian Poessinger
2022-04-04wwan: T4338: changing interface description should not trigger reconnectChristian Poessinger
Changing the WWAN interface description will trigger an interface reconnect. Reconnects should only be triggered in changes to the connection parameters like bond interfaces.
2022-04-04Merge pull request #1267 from sever-sever/T2580Christian Poessinger
ipoe: T2580: Add pools and gateway options
2022-04-04ipoe: T2580: Add pools and gateway optionsViacheslav Hletenko
Add new feature to allow to use named pools Can be used also with Radius attribute 'Framed-Pool' set service ipoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1' set service ipoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
2022-04-03static: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03vrf/vni: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03rpki: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03rip(ng): T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03smoketest: ospfv3: remove obsolete "end=''" statement in VRF interfaceChristian Poessinger
This is actually no longer required in FRR 8.2.2
2022-04-03policy: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03ospf: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03smoketest: ospfv3: T4302: adjust to FRR 8.2 CLIChristian Poessinger
2022-04-03ospfv3: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03smoketest: ospf(v3): ensure we can also run this test on a live systemChristian Poessinger
2022-04-03mpls: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03isis: T3156: add segment routing local-block for ISISChristian Poessinger
2022-04-03smoketest: isis: support running on live systemsChristian Poessinger
2022-04-03xml: isis: T3236: create common high-low label value include blockChristian Poessinger
2022-04-03isis: T4333: fix remaining "is defined" instancesChristian Poessinger
2022-04-03smoketest: isis: extend testcase to verify 'is-type level-2-only' can be setChristian Poessinger
2022-04-03isis: T4336: add support for MD5 authentication password on a circuitChristian Poessinger
2022-04-03isis: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03bfd: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03conntrack: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-02udp-broadcast-relay: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-02wwan: T4324: properly start/stop ModemManager and cron helper on interface ↵Christian Poessinger
add/removal
2022-04-02wwan: T4324: cronjob is setup via interfaces-wwan.py - drop dedicated cron fileChristian Poessinger
2022-04-01wwan: T4324: is_wwan_connected() must verify if ModemManager is runningChristian Poessinger
2022-04-01bgp: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-01vyos.template: T4333: add Jinja2 plugin to test if a variable is defined and ↵Christian Poessinger
not none We have a lot of boiler plate template code like {% if config.interface is defined and config.interface.remote_as is defined and config.interface.remote_as is not none %} ... {% endif %} This can be stripped down using a custom test to: {% if config.interface.remote_as is vyos_defined %} ... {% endif %} In addition the new vyos_defined test supports comparison {% if foo.bar.baz is vyos_defined('zoo') %} ... {% endif %} So the above will only evaluate to true if the variable foo.bar.baz is defined and its content is zoo This is inspired from https://github.com/aristanetworks/ansible-avd/ which make heavy use of it. All new templates should be written in this new style.
2022-04-01smoketest: bgp: adjust test parameter indentionChristian Poessinger
2022-04-01bgp: T4332: addpath-tx-per-as requires BGP deterministic-med paramtere to be setChristian Poessinger
2022-04-01smoketest: bgp: verify graceful-restart options per neighborChristian Poessinger
2022-04-01op-mode: monitor: T4308: support following FRR daemon logsChristian Poessinger
2022-04-01op-mode: logging: T4308: use full option name (--boot)Christian Poessinger
2022-04-01Merge pull request #1262 from sever-sever/T4329Christian Poessinger
policy: T4329: Fix regex for extcommunity rt
2022-04-01policy: T4329: Fix regex for extcommunity rtViacheslav Hletenko
Fix regex to allow to set several marks for extcommunity rt set extcommunity rt '65:24 65:23 192.168.2.1:11 192.168.0.2:222'
2022-03-31vyos.ifconfig: T4330: MTU must be configured prior to any IPv6 option changeChristian Poessinger
This extends the fix from 53e20097 ("vyos.ifconfig: T4330: bugfix changing MTU when IPv6 is disabled") by ordering the execution in a way the Kernel does not complain.