summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-30smoketest: remove unsupported wlan from vrf-bgp-pppoe-underlay test configChristian Breunig
2023-04-30smoketest: QEmu ethernet drivers only support ring-buffer size of 256 bytesChristian Breunig
Commit 0a802d20c - ("smoketest: add config with VRF BGP instance") added a config from a VMware VM. When moving to QEmu we must reduce the network card ring-bufer size from 4096 -> 256, as the tests failed with: > Driver only supports a maximum RX ring-buffer size of "256" bytes!
2023-04-29smoketest: add config with VRF BGP instanceChristian Breunig
Replica of a real network. BGP is realised inside a VRF. The BGP peering to the outside world is done via WireGuard that is backed by a PPPoE link - shiver!
2023-04-29Merge pull request #1967 from fett0/T5161Christian Breunig
BFD : T5161: add feature bfd static monitoring
2023-04-29smoketest: T5161: add IPv6 static route BFD testsChristian Breunig
2023-04-29smoketest: T5161: add missing whitespace in BFD profile during validationChristian Breunig
2023-04-29static: T5161: add BFD monitoring for static IPv6 routesfett0
2023-04-29static: T5161: add BFD monitoring for static routesfett0
2023-04-27bgp: T5010: add verify() for L2VPN EVPN route-distinguisher and route-targetChristian Breunig
Without the change users might get confused as the setting is specified on the VyOS CLI but never makes it to FRR due to an internal FRR check.
2023-04-27bgp: T5010: fix for-loop copy/paste errorChristian Breunig
Commit 923d7f1d7 (bgp: T5010: add missing for-loop when iterating over "both" route-target) referenced export rt instead of both. This happened while improperly copy-pasting the line.
2023-04-27bgp: T5010: add missing for-loop when iterating over "both" route-targetChristian Breunig
2023-04-27Revert "bgp: T3734: only support "l2vpn-evpn advertise-all-vni" in default VRF"Christian Breunig
This reverts commit bfe57cf80f4c71236f0885408d704a69575f0b30.
2023-04-27Merge pull request #1972 from sever-sever/T5181Christian Breunig
T5181: Fix condition to detect correct vrf name for vrf-vni
2023-04-27T5181: Fix condition to detect correct vrf name for vrf-vniViacheslav Hletenko
When we delete vrf vni there is a dictionary {'only_vrf': 'red', 'new_frr_config': '!\n'}
2023-04-27Merge pull request #1721 from dmbaturin/T4888-conntrack-sync-op-modeJohn Estabrook
conntrack-sync: T4888: rewrite the op mode script in the new format
2023-04-26bgp: T5181: FRR can not tear down VRF isntance if l3vni is still configuredChristian Breunig
Add verify() section to check if l3vni was removed in addition to the BGP process under any given VRF.
2023-04-26vrf: T5174: ensure no duplicate VNIs can be definedChristian Breunig
2023-04-26Merge pull request #1971 from sever-sever/T5181Christian Breunig
T5181: Fix for correct deleting vni under vrf
2023-04-26T5181: Fix for correct deleting vni under vrfViacheslav Hletenko
2023-04-25Merge pull request #1970 from jestabro/xml-mergeChristian Breunig
xml: T5179: fix missed case in multi_to_list conversion
2023-04-25vrf: T5150: fix improper config dict generation for individual vni configurationChristian Breunig
2023-04-25xml: T5179: fix missed case in multi_to_list conversionJohn Estabrook
2023-04-24Merge pull request #1968 from nagua/patch-1Daniil Baturin
openvpn: T4402: Update openvpn server.conf.j2
2023-04-23http-api: T5175: check value of attribute for FastAPI>=0.91.0John Estabrook
FastAPI v0.92.0 (starlette v0.24.0) sets default attribute Request._form; check for value == None instead of existence when overriding Request class.
2023-04-24OpenVPN: T4402: Update OpenVPN server.conf.j2 templateNicolas Riebesel
The ifconfig-pool command requires the arguments separated by a space. Hence the space was added before the subnet mask.
2023-04-23vrf: T5150: must use no_tag_node_value_mangle when working with the config dictChristian Breunig
2023-04-23smoketest: static: always remove all VRFs prior to the testChristian Breunig
2023-04-22Merge pull request #1966 from sever-sever/T1237Christian Breunig
T1237: Failover route add policy for targets checking
2023-04-22frr: T4353: fix "exit-vrf" indentionChristian Breunig
2023-04-22Merge pull request #1962 from indrajitr/ddclient-opmode-2Daniil Baturin
dns: T5144: Make dns dynamic status output legacy format compatible
2023-04-21vrf: T5150: fix regex used on frr-reload when searching for discrete VRFChristian Breunig
We must only search and replace for "vrf red" or "vrf green" - the regex used infact matched on all VRFs which is wrong. This would remove all VRF VNI configurations when only changing a single VRf.
2023-04-21Merge pull request #1957 from aapostoliuk/T5042-sagittaChristian Breunig
ipsec: T5042: Rewritten 'show vpn ipsec remote-access' command
2023-04-21Merge pull request #1965 from dmbaturin/python-depChristian Breunig
debian packaging: T5172: set minimum Python version to 3.10
2023-04-21vrf: T5150: l3vni must be removed prior to removing BGP VRF processChristian Breunig
2023-04-21T1237: Failover route add policy for targets checkingViacheslav Hletenko
Add policy (any-available|all-available) for target checking for failover route set protocols failover route 192.0.2.55/32 next-hop 192.168.122.1 check policy 'any-available' set protocols failover route 192.0.2.55/32 next-hop 192.168.122.1 check target '192.168.122.1' set protocols failover route 192.0.2.55/32 next-hop 192.168.122.1 check target '192.168.122.11' It depends if we need that all targets must be alive on just one target.
2023-04-21debian packaging: T5172: set minimum Python version to 3.10Daniil Baturin
since it's required for match statements and for op mode introspection
2023-04-21Merge pull request #1921 from rgwan/currentDaniil Baturin
T5123: op-mode: Support to show detailed ospf route table
2023-04-21Merge branch 'current' into currentDaniil Baturin
2023-04-20Merge pull request #1963 from sarthurdev/pki_fixChristian Breunig
pki: T3642: Fix show command if no CA certs are present
2023-04-19Merge pull request #1958 from srividya0208/T5159Daniil Baturin
op-mode: T5159: dhcpv6 incorrect warning message
2023-04-19op-mode: T5159: dhcpv6 incorrect warning messagesrividya0208
The operational command "show dhcpv6 server leases" shows a warning message e ven if dhcpv6 setting are configured and ipv6 address got assigned to clients.
2023-04-18pki: T3642: Fix show command if no CA certs are presentsarthurdev
2023-04-17dns: T5144: Make dns dynamic status output legacy format compatibleIndrajit Raychaudhuri
Adjust the output of dynamic dns status to be compatible with both legacy and new ddclient cache format. This is necessary because the legacy format is still used by some of the dyndns2 family of protocols. This is a follow-up to commit 3f3621b6874354.
2023-04-17op-mode: bgp: T1315: add VNI related commandsChristian Breunig
This extends commit 3fa1092930c (op-mode: bgp: support VRF related "show bgp vrf" commands). vyos@vyos:~$ show bgp vni Possible completions: 1-16777215 VXLAN network identifier (VNI) number all vyos@vyos:~$ show bgp vni 1 type Possible completions: 1 EAD (Type-1) route 2 MAC-IP (Type-2) route 3 Multicast (Type-3) route ead EAD (Type-1) route macip MAC-IP (Type-2) route multicast Multicast (Type-3) route vyos@vyos:~$ show bgp vni 1 vtep Possible completions: <x.x.x.x> Remote VTEP IP address
2023-04-17bgp: T3734: only support "l2vpn-evpn advertise-all-vni" in default VRFChristian Breunig
2023-04-17Merge pull request #1961 from sever-sever/T5137Christian Breunig
T5137: Refactoring show tech-support report
2023-04-17T5137: Refactoring show tech-support reportViacheslav Hletenko
Split script to small functions for flexible output reports. Improve header for commands. Each funciton easily can be modified or extended. Remove splitting command/output via percent symbol. Remove old commands and directiories like /etc/rc.local, iptables, brctl, etc. Remove ethtool operation for subinterfaces. Extend ethtool debug output. Add correct nftables command.
2023-04-15smoketest: T5150: remove deprecated testsChristian Breunig
There is no need for protocol specific embedded smoketests as the route-map option got removed. Tests are now conducted under the new CLI tree.
2023-04-15vyos.ifconfig: T2104: support adding and removing VLANs in one call.Christian Breunig
VLANIf('eth0.10').remove() will create and remove the VLAN in one command. Thus one can ensure when calling remove() on a VLAN it will always succeed.
2023-04-14Merge pull request #1959 from ServerForge/currentChristian Breunig
T5162: Updated configd-include.json to remove extra comma.