Age | Commit message (Collapse) | Author |
|
T5577: Optimized PAM configs for RADIUS/TACACS+
|
|
firewall: T5217: Synproxy bugfix and ct state conflict checking
|
|
|
|
mdns: T5615: Allow controlling IP version to use for mDNS repeater
|
|
Rename avahi-daemon config file to avahi-daemon.conf.j2 to match the
convention used by other config files.
|
|
This commit adds a new configuration option to the mDNS repeater service
to allow controlling which IP version to use for mDNS repeater.
Additionally, publishing AAAA record over IPv4 and A record over IPv6 is
disabled as suggested.
See:
- https://github.com/lathiat/avahi/issues/117#issuecomment-1651475104
- https://bugzilla.redhat.com/show_bug.cgi?id=669627#c2
|
|
T5217: Add firewall synproxy
|
|
conntrack: T5376: T5598: Restore kernel conntrack helpers
|
|
firewall: T5614: Add support for matching on conntrack helper
|
|
ipsec: T5606: Add support for whole CA chains
|
|
T5165: Add option protocol for policy local-route
|
|
Add option `protocol` for policy local-route
set policy local-route rule 100 destination '192.0.2.12'
set policy local-route rule 100 protocol 'tcp'
set policy local-route rule 100 set table '100'
|
|
firewall: T5160: Remove zone policy op-mode
|
|
|
|
|
|
`nf_conntrack_helper` that auto-assigned helpers is removed from the kernel
|
|
|
|
Also includes an update to smoketest to verify
|
|
T5497: op-mode: Add generate firewall rule-resequence
|
|
Add op-mode command `generate firewall rule-resequence`
Generates output with new sequences for firewall rules
set firewall ipv4 input filter rule 1 action 'accept'
set firewall ipv4 input filter rule 1 description 'Allow loopback'
$ generate firewall rule-resequence start 10 step 10
set firewall ipv4 input filter rule 10 action 'accept'
set firewall ipv4 input filter rule 10 description 'Allow loopback'
|
|
smoketest: T5607: support getting SCSI device by drive-id
|
|
Add ability to SYNPROXY connections
It is useful to protect against TCP SYN flood attacks and port-scanners
set firewall global-options syn-cookies 'enable'
set firewall ipv4 input filter rule 10 action 'synproxy'
set firewall ipv4 input filter rule 10 destination port '22'
set firewall ipv4 input filter rule 10 inbound-interface interface-name 'eth1'
set firewall ipv4 input filter rule 10 protocol 'tcp'
set firewall ipv4 input filter rule 10 synproxy tcp mss '1460'
set firewall ipv4 input filter rule 10 synproxy tcp window-scale '7'
|
|
|
|
|
|
T5602: Reverse-proxy add option backup for backend server
|
|
|
|
|
|
|
|
openvpn: T5269: add a deprecation warning for shared-secret
|
|
|
|
A `backup` server can be defined to take over in the case of all other
backends failing
set load-balancing reverse-proxy backend <tag> server <tag> address '192.0.2.3'
set load-balancing reverse-proxy backend <tag> server <tag> port '8883'
set load-balancing reverse-proxy backend <tag> server <tag> backup
|
|
conntrack: firewall: T4502: Update conntrack check for new flowtable CLI
|
|
Also updates flowtable smoketest to verify conntrack enabled
|
|
init: T5239: configure system hostname prior to FRR startup
|
|
On first boot after an upgrade /etc/hostname and FRR configuration is not
populated. FRR determines the system hostname once during startup and does not
repect changes of the hostname CLI value.
Thus after an upgrade of VyOS FRR started with a hostname of debian that was
propagated to peers.
The commit retrieves the hostname from the CLI and presets this before FRR is
initially started.
|
|
After sources analysis, we found the next possible return statuses for PAM
modules:
1. pam_tacplus
Auth:
- PAM_AUTH_ERR
- PAM_AUTHINFO_UNAVAIL
- PAM_AUTHTOK_ERR
- PAM_BUF_ERR
- PAM_CRED_INSUFFICIENT
- PAM_PERM_DENIED
- PAM_SUCCESS
- PAM_USER_UNKNOWN
Account:
- PAM_AUTH_ERR
- PAM_AUTHINFO_UNAVAIL
- PAM_PERM_DENIED
- PAM_SUCCESS
- PAM_USER_UNKNOWN
Session:
- PAM_AUTHINFO_UNAVAIL
- PAM_SESSION_ERR
- PAM_SUCCESS
- PAM_USER_UNKNOWN
2. pam_radius_auth
Auth:
- PAM_ABORT
- PAM_AUTH_ERR
- PAM_AUTHINFO_UNAVAIL
- PAM_AUTHTOK_ERR
- PAM_BAD_ITEM
- PAM_BUF_ERR
- PAM_CONV_AGAIN
- PAM_CONV_ERR
- PAM_IGNORE
- PAM_NO_MODULE_DATA
- PAM_PERM_DENIED
- PAM_SUCCESS
- PAM_SYSTEM_ERR
- PAM_USER_UNKNOWN
Account:
- PAM_SUCCESS
Session:
- PAM_ABORT
- PAM_AUTHINFO_UNAVAIL
- PAM_BAD_ITEM
- PAM_BUF_ERR
- PAM_CONV_AGAIN
- PAM_CONV_ERR
- PAM_IGNORE
- PAM_NO_MODULE_DATA
- PAM_PERM_DENIED
- PAM_SUCCESS
- PAM_SYSTEM_ERR
- PAM_USER_UNKNOWN
PAM configurations were replaced with tuned versions to take this into account.
|
|
bgp: T5596: add new features from FRR 9
|
|
isis: T5597: add new features from FRR 9
|
|
firewall: T4502: Update to flowtable CLI
|
|
A commit that removes `firewall bridge` will delete the table and not re-create it. Therefore any further firewall commit will fail trying to delete the non-existent bridge table. This commit ensures the table is always present (even if empty) to ensure successful commit.
|
|
supports HW flowtable offload
- Add required offload setting for interfaces + flowtable offload (hw-tc-offload)
- Verification of interface support for hardware offloaded flowtables
|
|
`set firewall flowtable <name> interface <ifname>`
`set firewall flowtable <name> offload [software|hardware]`
`set firewall [ipv4|ipv6] forward filter rule N action offload`
`set firewall [ipv4|ipv6] forward filter rule N offload-target <name>`
|
|
|
|
|
|
* Add support for IS-IS advertise-high-metrics
set protocols isis advertise-high-metrics
* Add support for IS-IS advertise-passive-only
set protocols isis advertise-passive-only
|
|
* Add BGP Software Version capability (draft-abraitis-bgp-version-capability)
set protocols bgp neighbor 192.0.2.1 capability software-version
* Add BGP neighbor path-attribute treat-as-withdraw command
set protocols bgp neighbor 192.0.2.1 path-attribute treat-as-withdraw
|
|
T5590: firewall log rule: fix order which rule are processed
|
|
conntrack: T5571: Refactor conntrack using vyos.configdep
|
|
- Moves MSS node out of `tcp-flags.xml.i` and into `tcp-mss.xml.i`
- Update smoketest to verify TCP flag matching
|
|
should be added at the end of the rule, after all matchers and befora action. Also change 2 lines in policy_route smoketest, which suddenly wasn't working as expected
|