| Age | Commit message (Collapse) | Author |
|---|
|
ipsec: T6148: Fixed reset command by adding init after terminating (backport #3763)
|
|
T6313: Add "NAT" to "generate" command for rule resequence (backport #3715)
|
|
T6572: stop repo sync for circinus
|
|
system: op-mode: T3334: allow delayed getty restart when configuring serial ports (backport #3698)
|
|
|
|
Make it more obvious for the user aber the severity of his action.
(cherry picked from commit b3b31153963cc4338e8229f9f94b339682dd73a0)
|
|
ports
* Created op-mode command "restart serial console"
* Relocated service control to vyos.utils.serial helpers, used by conf- and
op-mode serial console handling
* Checking for logged-in serial sessions that may be affected by getty reconfig
* Warning the user when changes are committed and serial sessions are active,
otherwise restart services as normal. No prompts issued during commit,
all config gen/commit steps still occur except for the service restarts
(everything remains consistent)
* To apply committed changes, user will need to run "restart serial console"
to complete the process or reboot the whole router
* Added additional flags and target filtering for generic use of helpers.
(cherry picked from commit bc9049ebd76576d727fa87b10b96d1616950237c)
|
|
Strongswan does not initiate session after termination via vici.
Added an CHILD SAs initialization on the initiator side
of the tunnel.
(cherry picked from commit 8838b29180ccc26d2aca0c22c9c8ca5e274825b2)
|
|
(cherry picked from commit 142545b0535d0a994182389c99b7bcd6d7c37c24)
|
|
vrf: T6603: conntrack ct_iface_map must only contain one entry for iifname/oifname (backport #3883)
|
|
(cherry picked from commit 31acb42ecdf4ecf0f636f831f42a845b8a00d367)
|
|
iifname/oifname
When any of the following features NAT, NAT66 or Firewall is enabled, for every
VRF on the CLI we install one rule into nftables for conntrack:
chain vrf_zones_ct_in {
type filter hook prerouting priority raw; policy accept;
counter packets 3113 bytes 32227 ct original zone set iifname map @ct_iface_map
counter packets 8550 bytes 80739 ct original zone set iifname map @ct_iface_map
counter packets 5644 bytes 67697 ct original zone set iifname map @ct_iface_map
}
This is superfluous.
(cherry picked from commit d6e9824f1612bd8c876437c071f31a1a0f44af5d)
|
|
T6572: trigger remote bot pr only from circinus
|
|
|
|
smoketest: T6614: initial support for op-mode command testing (backport #3888)
|
|
smoketest: T6592: remove unused "import os" (backport #3874)
|
|
smoketest: T5705: use locally connected remote syslog servers (backport #3889)
|
|
(cherry picked from commit 4717139174a869141a71cd28d10018e0cfcaece0)
|
|
(cherry picked from commit 33156c675f1bce0d2b3b1836a7d85abe25cd7f61)
|
|
As there has been no route to the configured syslog servers, smoketests produced:
rsyslogd: omfwd: socket 8: error 101 sending via udp: Network is unreachable
Rather use some fake syslog servers from 127.0.0.0/8 which are directly
connected and we do not need to look up a route, which will suppress the above
error message.
(cherry picked from commit 744ecfe60ed3633775feeb3da767a88709fd626c)
|
|
T6605: restore configd error formatting to be consistent with CLI (backport #3868)
|
|
vxlan: T6505: Support VXLAN VLAN-VNI range mapping in CLI (backport #3756)
|
|
(cherry picked from commit 115e99630a317cab62c6f99e0461f6ce2c1edaf3)
|
|
by TuneD (#3863)
(cherry picked from commit 7b82e4005724683c6311fab22358746f2cca4c1b)
Co-authored-by: Nataliia Solomko <natalirs1985@gmail.com>
|
|
(cherry picked from commit 645f24908c9b338adc56ecc83f8c44d0b0206550)
|
|
Debian: T6598: depend on podman version >=4.9.5 (backport #3873)
|
|
(cherry picked from commit b9daaaa38abc08d27158ea44e016752b3cb45400)
|
|
interface: T6592: remove interface from conntrack ct_iface_map on deletion (backport #3857)
|
|
Only some (e.g. ethernet or wireguard) interfaces validate if the supplied VRF
actually exists. If this is not validated, one can pass an invalid VRF to the
system which generates an OSError exception.
To reproduce
set interfaces vxlan vxlan1 vni 1000
set interfaces vxlan vxlan1 remote 1.2.3.4
set interfaces vxlan vxlan1 vrf smoketest
results in
OSError: [Errno 255] failed to run command: ip link set dev vxlan1 master smoketest_mgmt
This commit adds the missing verify_vrf() call to the missing interface types
and an appropriate smoketest for all interfaces supporting VRF assignment.
(cherry picked from commit dd0ebffa33728e452ac6e11737c2283f0e390359)
Co-authored-by: Christian Breunig <christian@breunig.cc>
|
|
deletion
Now that interfaces are deleted from ct_iface_map during deletion it's time to
also add a smoketest ensuring there is no entry in the ct_iface_map once an
interface was deleted from the CLI.
(cherry picked from commit 1c42ee9d16dd49fff2cbde652bf24a38f364526c)
|
|
We always have had stale interface entries in the ct_iface_map of nftables/
conntrack for any interface that once belonged to a VRF.
This commit will always clean the nftables interface map when the interface
is deleted from the system.
(cherry picked from commit 17c12bde5c6f314311e7524842fd1ddc254009b4)
|
|
op_mode: T6593: Release DHCP interface does not work (backport #3861)
|
|
op_mode: T6596: pppoe operation command failed (backport #3860)
|
|
(cherry picked from commit 92461c35c7ef131940c885aca894a2d8b3c89592)
|
|
(cherry picked from commit 79407cd5bbec3194a9b6542418229b33eab05121)
|
|
smoketest: T6600: ospf: enable MPLS LDP on dummy interfaces (backport #3838)
|
|
(cherry picked from commit 71926f64385d7ab66431c60afa1fc8554ad7e2dc)
|
|
T6594: Add missed pppd_compat module (backport #3832)
|
|
(cherry picked from commit 8c8054ad5410e8aedf6ab7a0702b317872d4fd41)
|
|
(cherry picked from commit 440a3e6b89748bfd861f580fc8c4f41b58c6cec2)
|
|
(cherry picked from commit ef50cd9954a2d6eb2a041c26a0bb8ea0758b1f17)
|
|
(cherry picked from commit b92bc209cc1d6ed54a5fa052e0c27c54488ae955)
|
|
wireless: T6597: improve hostapd startup and corresponding smoketests (backport #3833)
|
|
This was found during smoketesting as thoase started to repeadingly fail in the last weeks
File "/usr/libexec/vyos/tests/smoke/cli/test_interfaces_wireless.py", line 534, in test_wireless_security_station_address
self.assertTrue(process_named_running('hostapd'))
AssertionError: None is not true
Digging into this revealed that this is NOT related to the smoketest coding but
to hostapd/systemd instead. With a configured WIFI interface and calling:
"sudo systemctl reload-or-restart hostapd@wlan1" multiple times in a short
period caused systemd to report:
"Jul 18 16:15:32 systemd[1]: hostapd@wlan1.service: Deactivated successfully."
According to the internal systemd logic used in our version this is explained by:
/* If there's a stop job queued before we enter the DEAD state, we shouldn't act on Restart=, in order to not
* undo what has already been enqueued. */
if (unit_stop_pending(UNIT(s)))
allow_restart = false;
if (s->result == SERVICE_SUCCESS)
s->result = f;
if (s->result == SERVICE_SUCCESS) {
unit_log_success(UNIT(s));
end_state = SERVICE_DEAD;`
Where unit_log_success() generates the log message in question.
Improve the restart login in the wireless interface script and an upgrade to
hostapd solved the issue.
(cherry picked from commit a67f49d99eda00998c425f9a663e138dbd0f7755)
|
|
(cherry picked from commit 8bf6687b5276589e64988c3c54dbf61a628ee2a0)
|
|
(cherry picked from commit f6485f7df8713298d81ec0d45c548417db111523)
|
|
(cherry picked from commit 11b273108d78ab1588be3c077f40b2ac876369a4)
|
|
wireless: T6320: Add 802.11ax at 6GHz to VyOS (backport #3524)
|
|
Authored-By: Alain Lamar <alain_lamar@yahoo.de>
(cherry picked from commit d5e988ba2d0fa0189feff22374c9b46eb49e2e79)
|
|
openvpn: T3834: verify() is not allowed to change anything on the system (backport #3850)
|
