summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-29smoketest: dhcp-relay: T3095: initial testsChristian Poessinger
2020-11-28nat: T3092: migrate to get_config_dict()Christian Poessinger
The NAT system consists out of nested tag nodes which makes manual parsing very hard. This is a perfect candidate for migrating this to get_config_dict() as there is already a smoketest in place. In addition this should make it easier to add features like static nat/hairpin.
2020-11-28system: T3038: remove /dev/console from loadkeysChristian Poessinger
/dev/console is not always present, e.g. on headless devices like an APU4.
2020-11-28smoketest: pppoe-server: drop superfluous importChristian Poessinger
2020-11-28vyos.template: T2720: fix remaining in-line time_block syntaxChristian Poessinger
Commit a2ac9fac ("vyos.template: T2720: always enable Jinja2 trim_blocks feature") globally enabled the trim_blocks feature. Some templates still used in-line trim_blocks "{%"- or "-%}" which caused miss-placed line endings. This is fixed by removing all in-line trim_block statememnts of Jinja2 templates.
2020-11-27vyos.template: T2720: fix resolv.conf trim blocksChristian Poessinger
After commit a2ac9fac16eeb626d3969092fecf463650750640 remove no longer required template trim block statements.
2020-11-27Merge pull request #508 from jack9603301/currentChristian Poessinger
arping: T2715: Duplicate address detection option supporting ARP
2020-11-27vyos.template: T2720: always enable Jinja2 trim_blocks featureChristian Poessinger
2020-11-27igmp-proxy: T3088: migrate to get_config_dict()Christian Poessinger
2020-11-27vyos.configdict: T2665: add task id comment for later refactoringChristian Poessinger
2020-11-27smoketest: igmp-proxy: T3088: initial testcasesChristian Poessinger
2020-11-27Merge pull request #618 from DmitriyEshenko/fix-igmp-pimDaniil Baturin
pim: igmp: igmp-proxy: T2744: Add check to prevent pimd and igmp-prox…
2020-11-26pim: igmp: igmp-proxy: T2744: Add check to prevent pimd and igmp-proxy conflictDmitriyEshenko
2020-11-26tunnel: T3072: remove bridgable variable as this is already set by the base ↵Christian Poessinger
class
2020-11-26wireguard: T2653: interface is not bridgeableChristian Poessinger
FileNotFoundError: [Errno 2] failed to run command: ip link set dev wg01 master br0
2020-11-24arping: T2715: Duplicate address detection option supporting ARPjack9603301
2020-11-23mpls-conf: T915: fix Python format string after refactoringCheeze-It
2020-11-23tunnel: T3072: 'gre' devices do not support bridgingChristian Poessinger
2020-11-23bridge: T2875: handle OS exception when wifi interface does not support bridgingChristian Poessinger
2020-11-23op-mode: wireless: T3084: fix TypeErrorChristian Poessinger
2020-11-23mpls: T915: unclutter verify() code by using "not" statementsChristian Poessinger
2020-11-23mpls: T915: replace os.system() calls with vyos.util.call()Christian Poessinger
Also drop the Python2 print formatting code in favour of Python3 formatted strings.
2020-11-23mpls: T915: drop superfluous "-%}" from Jinja2 templateChristian Poessinger
Trimming blocks manually is not needed as the renderer is already called with the 'trim_blocks' option.
2020-11-23Debian: move wireguard-modules dependency to vyos-buildChristian Poessinger
The dependency on the WireGuard modules actually depend on the runnning Kernel. While already working on 5.9 support which has a buildin version of WireGuard, this also eases ARM development.
2020-11-23openvpn: T3074: fix site-2-site operation modeChristian Poessinger
When rendering the configs "ifconfig" statement wrong IP addresses have been used for the "tun" operating mode. This has been corrected.
2020-11-23vyos.template: fix is_ipv6 Jinja2 filterChristian Poessinger
Commit 6962bc53 ("vyos.template: provide general is_ip(v4|v6) helpers") introduced new Jinja2 template filters, but the one for checking an address if it is an IPv6 address was broken as it was yet unused.
2020-11-23Merge pull request #616 from Cheeze-It/currentChristian Poessinger
mpls-conf: T915: Refactored template, handler, added global features
2020-11-22mpls-conf: T915: Refactored FRR LDP template, MPLS handler, added MPLS ↵Cheeze_It
global features So this is a big update. The first thing that was done was a refactor to the FRR LDP template, MPLS handler, and XML conf tree MPLS global additions. The refactors should work and I did test them in my lab. It seems that everything does work as needed so far in my testing. There is something here that is considered configuration breaking from the old setup though. In the old setup the MPLS interface operation (as in the interfaces accepting MPLS labels and processing them) was tied with LDP. What this means is that MPLS processing was enabled at the same time as LDP interfaces were configured. We do not want this behavior for the future as there's other MPLS underlay technologies like SR and RSVP. If someone wants to enable SR or RSVP without enabling LDP then they now can. Before, they couldn't. The other additions are global changes to MPLS TTL propagation and MPLS max TTL enforcement. They have now been added. Lastly, there is an frr-reload bug that Runar Borge found with this. We have found that when totally deleting LDP that there has to be 3 commits done. This is because frr-reload doesn't properly do what it needs to do in 1 operation so we had to do 3. This will only affect people that are doing an entire LDP clear using "delete protocols mpls ldp." Otherwise it isn't seen. Anyway, this refactor now works with the FRR daemon directly for all changes. This also makes it much easier for adding stuff in the future. Thank you
2020-11-22defaults: T3082: multi_to_list must distinguish between values and defaultsJohn Estabrook
2020-11-22configdict: T3081: honor whitespace in multi node valuesJohn Estabrook
2020-11-22bgp: T2174: refactor Jinja template and reduce redundant pathsChristian Poessinger
The Jinja2 template contained a lot of redundant paths which only differed in either the address-family or neighbor vs. peer-group. This paths have been combined into for loops and a macro for generating a neighbor statement as peer-groups and regular neighbors share ~95% of the config.
2020-11-22smoketest: openvpn: T3080: verify configured keep-alive valuesChristian Poessinger
2020-11-22isis: T1316: remove debug printChristian Poessinger
2020-11-22op-mode: add "restart" treeChristian Poessinger
2020-11-22openvpn: T3080: add missing multiplication on keepalive config optionChristian Poessinger
2020-11-21smoketest: openvpn: T3060: verify authentication username and passwordChristian Poessinger
2020-11-21openvpn: T3060: fix client authentication username and password fileChristian Poessinger
2020-11-21openvpn: T3060: always listen op IPv4 and IPv6 socketsChristian Poessinger
2020-11-21system: T3078: fix vyos-configd handling for "system option" pathChristian Poessinger
In commit 193323ba ('system: T3078: rename "system options" -> "system option'") the Python handler was renamed but so was not the JSON file corresponding to the vyos-configd enabled scripts.
2020-11-21bridge: T3079: bugfix on VLAN 1 is deleted in VLAN-aware bridgesJACK
2020-11-21ethernet: T3048: fix migrator to also support a plain configChristian Poessinger
When VyOS boots the first time with the default configuration there it actually no "interface ethernet" node present in the config, thus we must exit the migrator. Without this change vyos.configtree.ConfigTreeError: Path [b'interfaces ethernet'] doesn't exist will be thrown.
2020-11-21system: T3078: rename "system options" -> "system option"Christian Poessinger
By design a CLI node should not be named by its plural but rather describe it as singular.
2020-11-21ethernet: T3048: drop static smp-affinity for dynamic performance tuningChristian Poessinger
After migrating the ethernet interfaces from the good old Perl days the smp-affinity node yet has no effect anymore as the code is still missing (my bad, sorry). Drop the smp-affinity node and rather use tuned instead with the network-throughput or network-latency profile. - network-throughput: Profile for throughput network tuning. It is based on the throughput-performance profile. It additionaly increases kernel network buffers. - network-latency: Profile for low latency network tuning. It is based on the latency-performance profile. It additionaly disables transparent hugepages, NUMA balancing and tunes several other network related sysctl parameters. I'd set network-throughput as the default on a new set system option performance <throughput | latency> CLI node which is present in the default configuration. https://access.redhat.com/sites/default/files/attachments/201501-perf-brief-low-latency-tuning-rhel7-v2.1.pdf
2020-11-20Merge pull request #614 from sever-sever/T439Christian Poessinger
policy-conf: T439: Add policy local-route PBR
2020-11-20policy-conf: T439: Add policy local-route PBRsever-sever
2020-11-20tunnel: T3072: remove debug print codeChristian Poessinger
2020-11-20tunnel: T3072: bugfix KeyError for IPv6 GRE verify codeChristian Poessinger
2020-11-20Makefile: T2653: remove ipv6 wireguard nodeChristian Poessinger
2020-11-20wireguard: ifconfig: T2653: interface address is not mandatoryChristian Poessinger
2020-11-20wireguard: T2653: fix IPv6 peer address configurationChristian Poessinger
While migration to get_config_dict() was introduced in commit 789775af9f5 the logic for adding an IPv4 or IPv6 peer address was using the wrong dictionary to determine if it's an IPv4 or IPv6 address. We now use the proper peer dict over the wrong config dict.