summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-25Merge pull request #977 from dmbaturin/no-system-integrityChristian Poessinger
T3773: delete the original "show system integrity" command
2021-08-25ipsec: T3775: Diffie Hellman Group 21 uses NIST Elliptic Curve "ecp521"Christian Poessinger
... there was a type setting ecp512 instead of ecp521.
2021-08-24vyos.ifconfig: T3772: bugfix missing VRRP interfacesChristian Poessinger
When the interface name was stripped down from "eth0.201" to "eth" to determine the appropriate interface section, VRRP interfaces got left out on the call to rstrip(). VRRP interfaces now show up in "show interfaces" as they did in VyOS 1.2. vyos@vyos:~$ show interfaces Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down Interface IP Address S/L Description --------- ---------- --- ----------- dum0 172.18.254.201/32 u/u eth0 - u/u eth0.10 172.16.33.8/24 u/u eth0.201 172.18.201.10/24 u/u eth1 10.1.1.2/24 u/u eth1v10 10.1.1.1/24 u/u eth2 - u/u lo 127.0.0.1/8 u/u ::1/128
2021-08-24op-mode: T2223: drop dead code "get_vrrp_intf()"Christian Poessinger
2021-08-24T3773: delete the original "show system integrity" commandDaniil Baturin
2021-08-24smoketest: bgp: extend ipv4/ipv6 safi route-target testsChristian Poessinger
Commit 474db49a ("bgp: T3759: "l2vpn evpn" and ipv4/ipv6 safi route-targets differ") made it possible to specify a whitelist separated list of route-targets, this is now validated through the smoketests.
2021-08-24bgp: T3759: "l2vpn evpn" and ipv4/ipv6 safi route-targets differChristian Poessinger
The "l2vpn evpn" address-family route-target command only accepts a single route-target value consisting of (A.B.C.D:MN|EF:OPQR|GHJK:MN). The "ipv4-unicast or ipv6-unicast" address-family route-target command for VPNs support multiple, whitespace separated route-target values. This commit adds a new custom validator named "bgp-route-target" with a --single and a --multi option to pass one or more route-target values.
2021-08-24container: T3769: remove container when marked as "disable"Christian Poessinger
2021-08-24policy: T2425: rename validator large-community-list -> bgp-large-community-listChristian Poessinger
... as we will get another bgp route-target validator soon.
2021-08-24container: T3769: disable bridge "hairpinMode" modeChristian Poessinger
After commit 209ce3d9 ("container: T3769: when container networks are used, always bridge the networks") IP masquerading (NAT) was disabled. No need to keep the haipin flag.
2021-08-23container: op-mode: T3765: "connect container" will now drop you to a shellChristian Poessinger
Commit a30d74f4 (container: op-mode: T3765: add "connect container mysql-server") added a CLI op-mode command to attach to a container - users typically not want to attach and consume stdout (can be done via logs) but rather wan't to debug inside the container image. vyos@vyos:~$ connect container unifi USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 202 0.0 0.0 4640 828 pts/1 Ss 21:06 0:00 /bin/sh root 203 0.0 0.0 34416 2872 pts/1 R+ 21:06 0:00 \_ ps faux root 187 0.0 0.0 18388 3124 ? S 21:03 0:00 /bin/bash root 186 0.0 0.0 4640 788 ? S 21:03 0:00 /bin/sh root 185 0.0 0.0 4640 824 ? S 21:03 0:00 /bin/sh root 184 0.0 0.0 4640 836 ? S 21:03 0:00 /bin/sh root 1 0.0 0.0 18520 3228 pts/0 Ss+ 20:50 0:00 bash /usr/local/bin/docker-entrypoint.sh unifi root 12 4.8 14.2 3688080 572756 pts/0 Sl+ 20:50 0:48 java -Dunifi.datadir=/unifi/data -Dunifi.logdir=/unifi/log -Dunifi.rundir=/var/run/unifi - root 35 0.7 3.4 1102700 139752 pts/0 Sl+ 20:50 0:07 \_ bin/mongod --dbpath /usr/lib/unifi/data/db --port 27117 --unixSocketPrefix /usr/lib/un Linux 57c689f739ed 5.10.60-amd64-vyos #1 SMP Fri Aug 20 14:44:59 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
2021-08-23container: T3769: when container networks are used, always bridge the networksChristian Poessinger
As VyOS is a network operation system with bridging and NATing available from the VyOS CLI, it makes no sense to let podman do it's own sort of "NAT". If one really want's to NAT into a container, use the VyOS CLI to do so. If you wan't to bridge your networks, use the VyOS CLI to do so.
2021-08-23smoketest: ospf: "metric-type" also works for kernel and static ↵Christian Poessinger
redistributed routes
2021-08-23container: T2216: add option to "disable" a containerChristian Poessinger
2021-08-23container: T2216: use common "generic-description.xml.i" building blockChristian Poessinger
2021-08-23container: T2216: verify() volume pathsChristian Poessinger
Volumes must have both a source and destination path specified. Also the source path must exist on the current system.
2021-08-23container: T2216: increase default memory limit to 512MBChristian Poessinger
2021-08-23container: T2216: bugfix ValueError when assembling volumesChristian Poessinger
A call to .items() was missing that triggered the following error: ValueError: too many values to unpack (expected 2)
2021-08-23container: T2216: no need to query container statusChristian Poessinger
As VyOS CLI is the only truth for dealing with containers we do not need to query if a container is running, exists or what so ever. We simply always restart it if something changes and do not rely on the underlaying Linux status. If a users does container stuff under the hood - it will be overridden.
2021-08-23container: T2216: name of container must be alphanumeric and can contain a ↵Christian Poessinger
hyphen
2021-08-23ipsec: T1210: use ConfigTreeQuery() instead of Config() from op-modeChristian Poessinger
2021-08-23pki: T3642: use ConfigTreeQuery() instead of Config() from op-modeChristian Poessinger
2021-08-23container: T2216: op-mode now supports updating the image for a given containerChristian Poessinger
2021-08-23container: T2216: increase sysctl inotify watchersChristian Poessinger
2021-08-23containers: T2216: restructure container_base_cmd to have image name at the endChristian Poessinger
2021-08-23containers: T2216: add CLI commands to specify restart behavior and memory usageChristian Poessinger
A container is limited to 256MB memory by default and will always restart on failure.
2021-08-23containers: T2216: xml: impove help string for address commandChristian Poessinger
2021-08-23containers: T2216: add environmnet variable constraintChristian Poessinger
An environment variable passed to podman can only consist out of alphanumeric characters, a hypend and an underscore.
2021-08-23container: T2216: add completion helper for "delete container image"Christian Poessinger
2021-08-23containers: T2216: add missing verify() step on environment variablesChristian Poessinger
A environment variable MUST always have a value specified. Non existing values will cause the following error: Traceback (most recent call last): File "/usr/libexec/vyos/conf_mode/containers.py", line 269, in <module> apply(c) File "/usr/libexec/vyos/conf_mode/containers.py", line 224, in apply env_opt += " -e ".join(f"{k}={v['value']}" for k, v in container_config['environment'].items()) File "/usr/libexec/vyos/conf_mode/containers.py", line 224, in <genexpr> env_opt += " -e ".join(f"{k}={v['value']}" for k, v in container_config['environment'].items()) KeyError: 'value'
2021-08-22Makefile: T3165: do not allow empty node.def files for op-mode commandsChristian Poessinger
Commit 99440fc0 ("Makefile: fix logic to detect empty "node.def" files") disabled the detection of empty node.def files for op-mode commands. The generation of a duplicate and thus empty node.def file is not prohibited by commit 17b5ac14 ("T3165: op-mode: prevent override of populated node.def file with empty content") and thus the check is re-enabled!
2021-08-22logChristian Poessinger
2021-08-22xml: op-mode: add missing help test for "reset openvpn" commandChristian Poessinger
2021-08-22xml: op-mode: add missing help test for "monitor protocol ospf" commandsChristian Poessinger
2021-08-22xml: op-mode: remove multiple "Reset a service" help definitionsChristian Poessinger
That nasty workaround to always specify the same value for the node.def file as the help text is no longer necessary after commit 17b5ac14 ("T3165: op-mode: prevent override of populated node.def file with empty content". The redundant definitions are no longer necessary.
2021-08-22container: op-mode: T3765: add "show log container" commandChristian Poessinger
2021-08-22T3165: op-mode: prevent override of populated node.def file with empty contentChristian Poessinger
This is an extension to commit b4fdcebe ("T3165: prevent override of populated node.def file with empty content") which implemented the same thing for the configuration mode commands.
2021-08-22scripts: op-mode: use Python 'f'ormat strings on debug messagesChristian Poessinger
2021-08-22ipsec: T2816: l2tp ipsec VPN must be started after strongSwanChristian Poessinger
2021-08-22container: op-mode: T3765: add "restart container" commandChristian Poessinger
2021-08-22container: op-mode: T3765: move "connect container" command to ↵Christian Poessinger
container.xml.in file
2021-08-22container: op-mode: T3765: add "connect container mysql-server" commandChristian Poessinger
2021-08-22ipsec: T1210: op-mode command for Windows has no "profile" optionChristian Poessinger
2021-08-22l2tp: Jinja2 add trailing newlineChristian Poessinger
2021-08-22smoketest: pppoes: adjust testcase to vyos.ifconfig.interface migrationChristian Poessinger
Now that the PPPoE interface also makes use of the vyos.ifconfig.interface class, we need to adjust the smoketests to reflect all those changes. TODO: Start a local PPPoE server in a namespace and connect locally for deeper testing.
2021-08-22pppoe: T1318: set source interface next to rp-pppoe.so plugin in peer templateChristian Poessinger
2021-08-22pppoe: T3641: set "noipv6" if IPv6 is not configured in newer pppd versionChristian Poessinger
2021-08-21vyos.configverify: use build-in functions for verify_interface_exists()Christian Poessinger
2021-08-21pppoe: T1318: bump priority by 1 so we can source from pseudo-ethernet ↵Christian Poessinger
interfaces
2021-08-21pppoe: T1318: implement missing access-concentrator CLI optionChristian Poessinger