summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-23wireless: T1627: change RADIUS CLI syntaxChristian Poessinger
Adopt RADIUS configuration and harmonize it with the rest of VyOS. Move the following configuration block: security { wpa { cipher CCMP mode wpa2 radius-server 172.16.100.10 { port 1812 secret secretkey } radius-server 172.16.100.11 { port 1812 secret secretkey } } } to the harmonized version of: security { wpa { cipher CCMP mode wpa2 radius { server 172.16.100.10 { port 1812 secret secretkey } server 172.16.100.11 { port 1812 secret secretkey } } } } And add the new "set interfaces wireless wlan0 security wpa radius source-address" CLI command to specify the origin of any RADIUS query on systems having multiple IP addresses.
2019-11-23l2tp: harmonize RADIUS wordingChristian Poessinger
2019-11-23wireless: T1627: re-order WPA key in hostapd configChristian Poessinger
2019-11-23wireless: T1627: change priority from 318 to 400Christian Poessinger
2019-11-23wireless: T1627: fix generated ht_capab and vht_capabChristian Poessinger
If no capabilities are configured on the CLI - there should also be no ht_capab or vht_capab entry in the resulting hostapd.conf
2019-11-23wireless: T1627: fix regex for 'ht channel-set-width'Christian Poessinger
2019-11-23wireless: T1627: config migrator does not support camel casingChristian Poessinger
convert all nodes to lowercase
2019-11-23wireless: T1627: initial rewrite of show-wireless.pl in PythonChristian Poessinger
2019-11-23wireless: T1627: add op-mode commandsChristian Poessinger
2019-11-23wireless: T1627: initial rewrite in XML/Python styleChristian Poessinger
Working: - Wireless modes b, g, n, ac - WPA/WPA2 psk and RADIUS (tested using Microsoft NPS)
2019-11-17wireless: T1627: fix interface names for list_interfaces.pyChristian Poessinger
The interface name was invalid, thus calling "list_interfaces.py -t wireless" won't return the actual wifi interfaces.
2019-11-14Merge pull request #164 from jestabro/T1443John Estabrook
[service https] T1443: add setting of HTTPS listen port
2019-11-14[service https] T1443: add setting of HTTPS listen portJohn Estabrook
2019-11-11ifconfig: T1793: extend set_speed_duplex() delta checkChristian Poessinger
Commit 9e4947770064 ("ifconfig: T1793: add delta check on set_speed_duplex()") was wave1 of reducing the amount of switch-port flaps and BGP session resets. The delta check now also handles the case of fixed speed and duplex settings.
2019-11-11[OpenVPN]: T1704: Added uppercase entries of ncp-ciphers, since there seems ↵vindenesen
to be a bug in OpenVPN client when comparing pushed cipher with local ncp cipher list
2019-11-11[OpenVPN]: T1704: Moved ncp-ciphers out of encryption block in config templatevindenesen
2019-11-11[OpenVPN]: T1704: Changed the description of ncp-ciphers in configvindenesen
2019-11-11[OpenVPN]: T1704: Added function for ncp-ciphers, and ability to disable it.vindenesen
[OpenVPN]: T1704: Changed config structure for OpenVPN encryption to support ncp-ciphers. [OpenVPN]: T1704: Added migration scripts for interface 2-to-3
2019-11-10Intel QAT: T1788: Intel QAT implementationhagbard
* adding packages dependency
2019-11-10ifconfig: T1793: add delta check on set_speed_duplex()Christian Poessinger
The speend and duplex settings should only be changed when they need to. Always configuring this setting will make the kernel disable and re-enable the physical interface. This will not only let the switchport flap but it will also reset e.g. BGP sessions. This is the first part of this fix for speed/duplex auto settings. In addition - this also reduces the config commit time.
2019-11-10ifconfig: T1793: add delta check on set_flow_control()Christian Poessinger
The flow control settings should only be changed when they need to. If flow control is altered, the kernel will disable and re-enable the interface. This will not only let the switchport flap but it will also reset e.g. BGP sessions. In addition - this also reduces the config commit time.
2019-11-10Python/ifconfig: wireguard: remove trailing whitespacesChristian Poessinger
2019-11-11Merge pull request #159 from DmitriyEshenko/QAT-curDaniil Baturin
QAT: T1788: Intel QAT implementation
2019-11-10Merge pull request #158 from DmitriyEshenko/cur-fix-l2tpChristian Poessinger
l2tp: T1747: automatically calculate gw-ip-address.
2019-11-10l2tp: T1747: automatically calculate gw-ip-addressDmitriyEshenko
2019-11-08ddclient: T1789: fix RFC2136 generated configChristian Poessinger
Commit 967067970494c1800f ("ddclient: T1030: adjust to latest syntax") was under the impression that ddclient 3.9.0 now handles every config item with a comma in the end. This is unfortunately not true on RFC2136 dynamic DNS entries. Remove commas on config template.
2019-11-08QAT: T1788: Intel QAT implementationDmitriyEshenko
2019-11-05Merge pull request #157 from jestabro/currentJohn Estabrook
T1774: fix error output
2019-11-05T1774: fix error outputJohn Estabrook
2019-11-04Python/ifconfig: T1557: do not allow both IPv4 and dhcp address on interfacesChristian Poessinger
2019-11-04list_interfaces: add wifi interfaces to bridgeable interfacesChristian Poessinger
2019-11-02bonding: T1777: change priority to be after ethernet interfacesChristian Poessinger
On system reboots (mainly) the bond has been created and configured a MAC address on the physical ports. Later ethernet interfaces have been configured overwriting the bond MAC address.
2019-11-02bridge: T1783: bugfix removal of member interfaceChristian Poessinger
Fix error when deleting a member with: delete interfaces bridge br0 member interface eth1 Traceback (most recent call last): File "/usr/libexec/vyos/conf_mode/interfaces-bridge.py", line 304, in <module> apply(c) File "/usr/libexec/vyos/conf_mode/interfaces-bridge.py", line 267, in apply br.del_port( intf['name'] ) TypeError: string indices must be integers
2019-10-31Merge pull request #156 from kroy-the-rabbit/bridgefixDaniil Baturin
[conf completion]: T1779: Add tunnels to completion
2019-10-30[conf completion]: T1779: Add tunnels to completionkroy
2019-10-28Merge pull request #154 from zdc/T1772Christian Poessinger
[XML templates] T1772: Add escaping of `\` symbol in `<regex>`
2019-10-28[XML templates] T1772: Changed old hacks to proper regex, according to the fixzsdc
2019-10-28Add a function for retrieving config dicts.Daniil Baturin
2019-10-27snmp: make script extension code more readableChristian Poessinger
2019-10-27snmp: use proper stat literals on chmod()Christian Poessinger
2019-10-27snmp: fix verify() indent on script extensionsChristian Poessinger
2019-10-27snmp: fix verify() bail out early orderChristian Poessinger
2019-10-27snmp: T1738: cleanup import statementsChristian Poessinger
2019-10-27Merge pull request #155 from kroy-the-rabbit/py-interfaceChristian Poessinger
T1759: Merging interface.py into ifconfig.py
2019-10-27T1759: Fixing dependency bug from previous commitkroy
2019-10-27T1773, T1774: add a show config operation with JSON and raw options.Daniil Baturin
2019-10-27T1759: Merging interface.py into ifconfig.pykroy
2019-10-27Allow list arguments in the vyos.config show_config() function.Daniil Baturin
2019-10-27Replace the try and wait for segfault approach with explicit inSession check.Daniil Baturin
2019-10-27T1773: add a script for converting the config to JSON.Daniil Baturin
It also exposes those functions in vyos.configtree
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 08:51:42 +0000