| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
|
|
Shared network name should not be handled by tag node mangling
I.e. should not replace underscores with dashed
set service dhcp-server shared-network-name NET_01
shared-network NET_01 {
authoritative;
...
on commit {
set shared-networkname = "NET_01";
}
}
|
|
|
|
|
|
Signed-off-by: Georg <georg@lysergic.dev>
|
|
|
|
|
|
shared-network
|
|
The DHCP servers pool {} option can only be used when there follows a range
statement. This is invalid for a network with only "static" leases.
|
|
This option is mandatory and must be user configurable as it needs to match
on both sides.
|
|
|
|
|
|
DHCP servers "shared-network" level only makes sense if one can specify
configuration items that can be inherited by individual subnets. This is now
possible for name-servers and the domain-name.
set service dhcp-server shared-network-name LAN domain-name 'vyos.net'
set service dhcp-server shared-network-name LAN name-server '192.0.2.1'
|
|
IPv4 DHCP uses "dns-server" to specify one or more name-servers for a given
pool. In order to use the same CLI syntax this should be renamed to name-server,
which is already the case for DHCPv6.
|
|
vyos@vyos# show service dhcp-server
shared-network-name LAN {
subnet 10.0.0.0/24 {
default-router 10.0.0.1
dns-server 194.145.150.1
lease 88
range 0 {
start 10.0.0.100
stop 10.0.0.200
}
static-route 192.168.10.0/24 {
next-hop 10.0.0.2
}
static-route 192.168.20.0/24 {
router 10.0.0.2
}
}
}
|
|
|
|
A reference to a dictionary key obtained by a for loop can not be used to update
values inside that dictionaries key. You must use the original path to the
nested dictionaries key.
|
|
Running ISC DHCP server as backend server for multiple pools served to relay
agents requires DHCPd to explicitly listen on give interfaces or a "transit"
subnet declaration facing the network where we receive the DHCPREQ messages on.
This implements a new "listen-address" CLI node, the given address is validated
if it is assigned to the system and upon success, a proper "subnet { }" statement
is added into dhcpd.conf
|
|
While rewriting the code to get_config_dict() in commit 84b7ade286 ("dhcp: T3100:
migrate server configuration to get_config_dict()") a regression was added not
properly joining strings when multiple search-somains had been given.
Wrong: domain-search "domain1, domain2";
Correct: domain-search "domain1", "domain2";
|
|
|
|
|
|
|
|
Commit a2ac9fac ("vyos.template: T2720: always enable Jinja2 trim_blocks
feature") globally enabled the trim_blocks feature. Some templates still used
in-line trim_blocks "{%"- or "-%}" which caused miss-placed line endings.
This is fixed by removing all in-line trim_block statememnts of Jinja2 templates.
|
|
|
