summaryrefslogtreecommitdiff
path: root/data/templates/firewall/nftables-nat.tmpl
AgeCommit message (Collapse)Author
2020-07-12nat: T2699: fix exclusion rules for noNAT destinationsChristian Poessinger
2020-06-14nat: T2593: fix for SNAT translation port when using masqueradeChristian Poessinger
The "to" qualifier did not get rendered when using source ports in masquerade targets. This case was totally missed out when porting.
2020-06-12nat: T2571: add special handling for negated source/destination port(s)Christian Poessinger
We specify NFT source/destination ports within a { } group, but if the port range in question is negated, we need to move the != fraction out of { } and infront of that group, else NFT loading will fail big time.
2020-06-12Revert "nat: T2571: fix negated port definitions"Christian Poessinger
This reverts commit 927c054d9236c2c34ca43c1cbfff10fcfd7f5077.
2020-06-11nat: T2571: fix negated port definitionsChristian Poessinger
2020-05-16nat: T2198: use Jinja2 macro for common ruleset for SNAT and DNATChristian Poessinger
By using a Jinja2 macro the same template code can be used to create both source and destination NAT rules with only minor changes introduced by e.g. the used chain (POSTROUTING vs PREROUTING). Used the following configuration for testing on two systems with VyOS 1.2 and the old implementation vs the new one here. set nat destination rule 15 description 'foo-10' set nat destination rule 15 destination address '1.1.1.1' set nat destination rule 15 inbound-interface 'eth0.202' set nat destination rule 15 protocol 'tcp_udp' set nat destination rule 15 translation address '192.0.2.10' set nat destination rule 15 translation port '3389' set nat destination rule 20 description 'foo-20' set nat destination rule 20 destination address '2.2.2.2' set nat destination rule 20 destination port '22' set nat destination rule 20 inbound-interface 'eth0.201' set nat destination rule 20 protocol 'tcp' set nat destination rule 20 translation address '192.0.2.10' set nat source rule 100 outbound-interface 'eth0.202' set nat source rule 100 protocol 'all' set nat source rule 100 source address '192.0.2.0/26' set nat source rule 100 translation address 'masquerade' set nat source rule 110 outbound-interface 'eth0.202' set nat source rule 110 protocol 'tcp' set nat source rule 110 source address '192.0.2.0/26' set nat source rule 110 source port '5556' set nat source rule 110 translation address 'masquerade' set nat source rule 120 outbound-interface 'eth0.202' set nat source rule 120 protocol 'tcp_udp' set nat source rule 120 source address '192.0.3.0/26' set nat source rule 120 translation address '2.2.2.2'
2020-05-16nat: T2198: restructure DNAT template part for less duplicated codeChristian Poessinger
Build up only one output rule string by appending the configuration part by part.
2020-05-16nat: T2198: add support for SNAT based on source addressesChristian Poessinger
CLI commands used for ruleset generation: set nat source rule 100 outbound-interface 'eth0.202' set nat source rule 100 protocol 'all' set nat source rule 100 source address '192.0.2.0/26' set nat source rule 100 translation address 'masquerade' set nat source rule 110 outbound-interface 'eth0.202' set nat source rule 110 protocol 'tcp' set nat source rule 110 source address '192.0.2.0/26' set nat source rule 110 source port '5556' set nat source rule 110 translation address 'masquerade'
2020-05-16nat: T2198: sync generated SNAT rules with VyOS 1.2Christian Poessinger
The generated NAT rules in VyOS 1.2 are compared to the generated nftables ruleset in VyOS 1.3 this was done by converting the 1.2 iptables ruleset to nftables and then do the diff. To convert from iptables to nftables use the following command: $ iptables-save -t nat > /tmp/tmp.iptables $ iptables-restore-translate -f /tmp/tmp.iptables The following CLI options have been used for testing: set nat source rule 10 description 'foo-10' set nat source rule 10 destination address '1.1.1.1' set nat source rule 10 destination port '1111' set nat source rule 10 exclude set nat source rule 10 log 'enable' set nat source rule 10 outbound-interface 'eth0.202' set nat source rule 10 protocol 'tcp_udp' set nat source rule 10 translation address '192.0.2.10' set nat source rule 15 description 'foo-10' set nat source rule 15 destination address '1.1.1.1' set nat source rule 15 exclude set nat source rule 15 log 'enable' set nat source rule 15 outbound-interface 'eth0.202' set nat source rule 15 protocol 'tcp_udp' set nat source rule 15 translation address '192.0.2.10' set nat source rule 20 description 'foo-20' set nat source rule 20 destination address '2.2.2.2' set nat source rule 20 log 'enable' set nat source rule 20 outbound-interface 'eth0.201' set nat source rule 20 protocol 'tcp' set nat source rule 20 translation address '192.0.2.10' set nat source rule 100 outbound-interface 'eth0.202' set nat source rule 100 protocol 'all' set nat source rule 100 source address '192.0.2.0/26' set nat source rule 100 translation address 'masquerade'
2020-05-16nat: T2198: sync generated DNAT rules with VyOS 1.2Christian Poessinger
The generated NAT rules in VyOS 1.2 are compared to the generated nftables ruleset in VyOS 1.3 this was done by converting the 1.2 iptables ruleset to nftables and then do the diff. To convert from iptables to nftables use the following command: $ iptables-save -t nat > /tmp/tmp.iptables $ iptables-restore-translate -f /tmp/tmp.iptables The following CLI options have been used for testing: set nat destination rule 10 description 'foo-10' set nat destination rule 10 destination address '1.1.1.1' set nat destination rule 10 destination port '1111' set nat destination rule 10 exclude set nat destination rule 10 inbound-interface 'eth0.202' set nat destination rule 10 log set nat destination rule 10 protocol 'tcp_udp' set nat destination rule 10 translation address '192.0.2.10' set nat destination rule 15 description 'foo-10' set nat destination rule 15 destination address '1.1.1.1' set nat destination rule 15 exclude set nat destination rule 15 inbound-interface 'eth0.202' set nat destination rule 15 log set nat destination rule 15 protocol 'tcp_udp' set nat destination rule 15 translation address '192.0.2.10' set nat destination rule 20 description 'foo-20' set nat destination rule 20 destination address '2.2.2.2' set nat destination rule 20 inbound-interface 'eth0.201' set nat destination rule 20 log set nat destination rule 20 protocol 'tcp' set nat destination rule 20 translation address '192.0.2.10'
2020-05-16nat: T2198: do not run DNAT rule if rule is disabledChristian Poessinger
2020-05-16nat: T2198: restructure DNAT templateChristian Poessinger
Make the entire template more maintainable
2020-05-16nat: T2198: make use of jmespath when walking nftables JSON outputChristian Poessinger
2020-05-16nat: T2198: implement deletion of NAT subsystemChristian Poessinger
2020-05-16nat: T2198: automatically determine handler numbersChristian Poessinger
When instantiating NAT it is required to isntall some nftable jump targets. The targets need to be added after a specific other target thus we need to dynamically query the handler number. This is done by get_handler() which could be moved to vyos.util at a later point in time so it can be reused for a firewall rewrite.
2020-05-16nat: T2198: move from iptables to nftablesChristian Poessinger