summaryrefslogtreecommitdiff
path: root/data/templates/firewall
AgeCommit message (Collapse)Author
2023-07-03T5333: Set prefix UD for PBR generated user-defined chain namesViacheslav Hletenko
We cannot use some specific names like POSTROUTING/PREROUTING as for PBR they overlaps with VyOS defined chains Chains aftoconfigured by VyOS itself: chain VYOS_PBR_PREROUTING chain VYOS_PBR_POSTROUTING If we try to use chain name "POSTROUTING" it generates 2 chains with the same name "chain VYOS_PBR_POSTROUTING" one is autoconfigured and the second defined by user set policy route POSTROUTING rule 100 Add the user-defined (UD) prefix to separate user defined names That allows to use any user-defined names
2023-03-31T5128: Policy Route: allow wildcard on interfaceNicolas Fort
2022-12-17Merge pull request #1626 from nicolas-fort/fwall_group_interfaceChristian Poessinger
T4780: Firewall: add firewall groups in firewall. Extend matching cri…
2022-11-19T4780: Firewall: add firewall groups in firewall. Extend matching criteria ↵Nicolas Fort
so this new group can be used in inbound and outbound matcher
2022-11-11policy: T2199: T4605: Migrate policy route interface to `policy route|route6 ↵sarthurdev
<name> interface <ifname>` * Include refactor to policy route to allow for deletion of mangle table instead of complex cleanup * T4605: Rename mangle table to vyos_mangle
2022-11-03nat: T1877: T970: Add firewall groups to NATsarthurdev
2022-11-03firewall: T970: Refactor domain resolver, add firewall source/destination ↵sarthurdev
`fqdn` node
2022-10-25nat: T4764: Remove tables on NAT deletionsarthurdev
2022-10-10firewall: T4741: Verify zone `from` is defined before usesarthurdev
2022-10-09firewall: T3907: Fix firewall state-policy loggingsarthurdev
When log-level was introduced node `state-policy x log` was removed without migrator. This commit adds it back and improves log handling.
2022-09-21nat: T4605: Refactor static NAT to use python module for parsing rulessarthurdev
* Rename table to vyos_nat * Add static NAT smoketest
2022-09-21nat66: T4605: Refactor NAT66 to use python module for parsing rulessarthurdev
* Rename table to vyos_nat * Refactor tests to use `verify_nftables` format
2022-09-21nat: T4605: Refactor NAT to use python module for parsing rulessarthurdev
* Rename table to vyos_nat * Refactor tests to use `verify_nftables` format
2022-09-17Merge pull request #1546 from nicolas-fort/fwall-jumpChristian Poessinger
T4699: Firewall: Add jump action in firewall ruleset
2022-09-16firewall: T2199: enable "auto-merge" on setsChristian Poessinger
vyos@vyos# show firewall +name foo { + rule 1 { + action accept + packet-length 100 + packet-length 105 + packet-length 200-300 + packet-length 220-250 + } +} will report a nftables error upon load: Error: conflicting intervals specified With nftables 1.0.3 there is an "auto-merge" option which corrects this: https://lwn.net/Articles/896732/
2022-09-16T4699: Firewall: Add jump action in firewall rulestNicolas Fort
2022-09-13zone-policy: T2199: Migrate zone-policy to firewall nodesarthurdev
2022-09-13firewall: T4605: Rename filter tables to vyos_filtersarthurdev
2022-09-13firewall: T2199: Move initial firewall tables to datasarthurdev
2022-09-13firewall: T2199: Refactor firewall + zone-policy, move interfaces under ↵sarthurdev
firewall node * Refactor firewall and zone-policy rule creation and cleanup * Migrate interface firewall values to `firewall interfaces <name> <direction> name/ipv6-name <name>` * Remove `firewall-interface.py` conf script
2022-09-01Merge pull request #1466 from sever-sever/T538Christian Poessinger
nat: T538: Add static NAT one-to-one
2022-09-01policy-route: T4655: Remove default_action from templateViacheslav Hletenko
Remove `default_action` from template "nftables-policy" as XML policy route does not use it Set default action 'accept' for policy route, as default action 'drop' must be used only for firewall and not related to the policy route
2022-08-31nat: T538: Move nat configs to /run directoryViacheslav Hletenko
2022-08-20nat66: T4631: Add port and protocol to nat66Viacheslav Hletenko
Ability to configure src/dst/translation port and protocol for SNAT and DNAT IPv6
2022-08-19UPnP: T4611: Rule must be as prefix instead of an addressViacheslav Hletenko
From the doc miniupnpd IP/mask format must be nnn.nnn.nnn.nnn/nn Comment out invalid option "anchor"
2022-08-17nat: T538: Add static NAT one-to-oneViacheslav Hletenko
Ability to set static NAT (one-to-one) in one rule set nat static rule 10 destination address '203.0.113.0/24' set nat static rule 10 inbound-interface 'eth0' set nat static rule 10 translation address '192.0.2.0/24' It will be enough for PREROUTING and POSTROUTING rules Use a separate table 'vyos_static_nat' as SRC/DST rules and STATIC rules can have the same rule number
2022-08-16UPnP: T4620: Fix Jinja2 template rulesViacheslav Hletenko
2022-08-05nat66: T4598: Add exclude options in nat66Nicolas Fort
2022-08-03nat66: T4586: Add SNAT destination prefix and DNAT addressViacheslav Hletenko
Ability to configure SNAT destination prefix and DNAT source address Add option "!" - not address/prefix for NAT66
2022-06-14firewall: T970: Use set prefix to domain groupssarthurdev
2022-06-14firewall: T4147: Use named sets for firewall groupssarthurdev
* Refactor nftables clean-up code * Adds policy route test for using firewall groups
2022-06-11firewall: T4299: Add support for GeoIP filteringsarthurdev
2022-06-10firewall: T478: Add support for nesting groupssarthurdev
2022-05-28firewall: T970: Add firewall group domain-groupViacheslav Hletenko
Domain group allows to filter addresses by domain main Resolved addresses as elements are stored to named "nft set" that used in the nftables rules Also added a dynamic "resolver" systemd daemon vyos-domain-group-resolve.service which starts python script for the domain-group addresses resolving by timeout 300 sec set firewall group domain-group DOMAINS address 'example.com' set firewall group domain-group DOMAINS address 'example.org' set firewall name FOO rule 10 action 'drop' set firewall name FOO rule 10 source group domain-group 'DOMAINS' set interfaces ethernet eth0 firewall local name 'FOO' nft list table ip filter table ip filter { set DOMAINS { type ipv4_addr flags interval elements = { 192.0.2.1, 192.0.2.85, 203.0.113.55, 203.0.113.58 } } chain NAME_FOO { ip saddr @DOMAINS counter packets 0 bytes 0 drop comment "FOO-10" counter packets 0 bytes 0 return comment "FOO default-action accept" } }
2022-05-01firewall: T4353: fix Jinja2 linting errorsChristian Poessinger
2022-05-01vrf: T4353: fix Jinja2 linting errorsChristian Poessinger
2022-04-25nat: T4210: Fix template for negated portsViacheslav Hletenko
2022-04-18NAT: T4365: Fix for nat tables manipulation on netfilterNicolas Fort
2022-04-13firewall: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-10firewall: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-10policy: route: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-10nat(66): T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-02-04firewall: T4209: Fix support for rule `recent` matchessarthurdev
2022-01-29firewall: T4218: Adds a prefix to all user defined chainssarthurdev
2022-01-30Merge pull request #789 from jack9603301/T3420Daniil Baturin
upnpd: T3420: Support UPNP protocol
2022-01-20firewall: T2199: Add log prefix to match legacy perl behavioursarthurdev
Example syslog: [FWNAME-default-D] ... * Also clean-up firewall default-action
2022-01-19Merge pull request #1177 from sarthurdev/mac_groupsChristian Poessinger
firewall: T3560: Add support for MAC address groups
2022-01-18firewall: T3560: Add support for MAC address groupssarthurdev
2022-01-18firewall: T4188: Create default conntrack `FW_CONNTRACK` chainsarthurdev
This chain was missing from the XML/Python rewrite thus all traffic fell through to the `notrack` rule.
2022-01-11policy: T2199: Refactor policy route script for better error handlingsarthurdev
* Migrates all policy route references from `ipv6-route` to `route6` * Update test config `dialup-router-medium-vpn` to test migration of `ipv6-route` to `route6`