summaryrefslogtreecommitdiff
path: root/data/templates/frr
AgeCommit message (Collapse)Author
2023-09-14T2044: RPKI doesn't boot properlyApachez
2023-09-13T5576: Add BGP remove-private-as all optionViacheslav Hletenko
Add the ability to use the option all for remove-private-as. Remove private ASNs in outbound updates. all - Apply to all AS numbers set protocols bgp neighbor <tag> address-family ipv4-unicast remove-private-as all
2023-09-09Merge pull request #2179 from vfreex/add-mldChristian Breunig
T5518: Add basic MLD support
2023-09-08T5518: Add basic MLD supportYuxiang Zhu
Currently VyOS has `protocol igmp` option to enable IGMP querier and reports through FRR's pimd. I would like to add support for IPv6 as well since FRR's IPv6 multicast functionality has significantly improved. Enabling both MLD and IGMP on a VyOS router will allow us to turn on multicast snooping on layer-3 switches in dual-stack networks. Example commands: ``` // Enable on interface eth0 set protocols pim6 interface eth0 // Explicitly join multicast group ff18::1234 on interface eth1 set protocols pim6 interface eth1 mld join ff18::1234 // Explicitly join source-specific multicast group ff38::5678 with source address 2001:db8::1 on interface eth1 set protocols pim6 interface eth1 mld join ff38::5678 source 2001:db8::1 ```
2023-09-03T5543: IGMP: fix source address handling in static joinsYuxiang Zhu
The following command expects to join source-specific multicast group 239.1.2.3 on interface eth0, where the source address is 192.0.2.1. set protocols igmp interface eth0 join 239.1.2.3 source 192.0.2.1 This command should generate FRR config: interface eth0 ip igmp ip igmp join 239.1.2.3 192.0.2.1 exit However, there is a bug in the Jinja template where `if ifaces[iface].gr_join[group]` is mostly evaluated as `false` because `iface` is a loop variable from another loop.
2023-08-19bgp: T5466: rename type on CLI per-nexhop -> per-nexthop for l3vpn MPLS labelsChristian Breunig
This fixes a CLI typo added in commit 77ef9f800 ("T5466: L3VPN label allocation mode").
2023-08-16 T5466: L3VPN label allocation modefett0
2023-08-07T5446: BGP: change <bgp paramater bestpath med> from node to leafNode, in ↵Nicolas Fort
order to avoid empty value and problems when removing such parameters
2023-08-04frr: T5415: make mgmtd only listen on localhostChristian Breunig
2023-07-21ospf: T5377: add "capability opaque" supportChristian Breunig
2023-07-20ospf: T5377: add graceful restart FRR feature (RFC 3623)Christian Breunig
New CLI commands: * set protocols ospf graceful-restart grace-period 300 * set protocols ospf graceful-restart helper planned-only * set protocols ospf graceful-restart helper no-strict-lsa-checking * set protocols ospf graceful-restart helper supported-grace-time 400 * set protocols ospf graceful-restart helper enable router-id 192.0.2.1 * set protocols ospf graceful-restart helper enable router-id 192.0.2.2 * set protocols ospfv3 graceful-restart grace-period 300 * set protocols ospfv3 graceful-restart helper planned-only * set protocols ospfv3 graceful-restart helper lsa-check-disable * set protocols ospfv3 graceful-restart helper supported-grace-time 400 * set protocols ospfv3 graceful-restart helper enable router-id 192.0.2.1 * set protocols ospfv3 graceful-restart helper enable router-id 192.0.2.2
2023-07-12bgp: T5338: simplify XML and code handlingChristian Breunig
2023-07-11bgp: T5338: Added 'protocols bgp interface <int> mpls forwarding' featureaapostoliuk
Added 'protocols bgp interface <int> mpls forwarding' feature. It is possible to permit BGP install VPN prefixes without transport labels. This configuration will install VPN prefixes originated from an e-bgp session, and with the next-hop directly connected.
2023-07-03ospf: T5334: add support for external route summarisation Type-5 and Type-7 LSAsChristian Breunig
* set protocols ospf aggregation timer <seconds> * set protocols ospf summary-address x.x.x.x/x [tag 1-4294967295] * set protocols ospf summary-address x.x.x.x/x no-advertise
2023-05-19T5230: remove trailing tabs causing j2lint errorJohn Estabrook
2023-05-19T5230: Added missing enforce-first-as option to bgp protocol common config ↵Wered
and frr bgp jinja template.
2023-05-02T5163: Add match protocol filter for route-mapViacheslav Hletenko
Ability to match 'source-protocol' for the route-map filters set policy route-map foo rule 10 action 'permit' set policy route-map foo rule 10 match protocol 'bgp'
2023-04-29static: T5161: add BFD monitoring for static routesfett0
2023-04-27bgp: T5010: fix for-loop copy/paste errorChristian Breunig
Commit 923d7f1d7 (bgp: T5010: add missing for-loop when iterating over "both" route-target) referenced export rt instead of both. This happened while improperly copy-pasting the line.
2023-04-27bgp: T5010: add missing for-loop when iterating over "both" route-targetChristian Breunig
2023-04-26vrf: T5174: ensure no duplicate VNIs can be definedChristian Breunig
2023-04-22frr: T4353: fix "exit-vrf" indentionChristian Breunig
2023-04-21vrf: T5150: l3vni must be removed prior to removing BGP VRF processChristian Breunig
2023-04-13T5150: initial VRF support for Kernel/Zebra route-map filteringChristian Breunig
2023-04-13T5150: do not apply zebra route-map from routing-daemon config levelChristian Breunig
2023-04-13T5150: initial implementation of new Kernel/Zebra route-map supportChristian Breunig
It is possible to install a route-map which filters the routes between routing daemons and the OS kernel (zebra) As of now this can be done by e.g. * set protocols ospf route-map foo * set protocols ospfv3 route-map foo * set protocols bgp route-map foo Which in turn will install the following lines into FRR * ip protocol ospf route-map foo * ipv6 protocol ospf6 route-map foo * ip protocol bgp route-map foo The current state of the VyOS CLI is incomplete as there is no way to: * Install a filter for BGP IPv6 routes * Install a filter for static routes * Install a filter for connected routes Thus the CLI should be redesigned to close match what FRR does for both the default and any other VRF * set system ip protocol ospf route-map foo * set system ipv6 protocol ospfv3 route-map foo * set system ip protocol bgp route-map foo * set system ipv6 protocol bgp route-map foo The configuration can be migrated accordingly. This commit does not come with the migrator, it will be comitted later.
2023-04-04T5081: ISIS and OSPF syncronization with IGP-LDP syncCheeze_It
2023-03-27bgp: T5114: support configuring TCP keepalive messagesChristian Breunig
2023-03-27bgp: T5114: add "neighbor path-attribute discard"Christian Breunig
2023-03-14T5085: Fix ipv6 route-map for ospfv3Viacheslav Hletenko
Add template to generate zebra "ipv6 protocol ospf6 route-map xxx"
2023-02-28Merge pull request #1800 from vfreex/feature-babelChristian Breunig
T4977: Add Babel routing protocol support
2023-02-12T5001: Replace links to the phabricator siteChristian Breunig
Replace links to the phabricator site from https://phabricator.vyos.net to https://vyos.dev
2023-02-08T4977: Add Babel routing protocol supportYuxiang Zhu
This PR adds basic Babel routing protocol support using the implementation in FRR. Signed-off-by: Yuxiang Zhu <vfreex@gmail.com>
2023-02-04T4817, Corrected formatting.Kyle McClammy
2023-02-04T4817 added support for RFC 9234Kyle McClammy
2023-01-30T4964: Fix template bgpd.frr.j2 for l2vpn vni route-targetsViacheslav Hletenko
Route-target export/import for l2vpn-evpn vni xxx works as leafNode with multiple values We have to use "for" for such values
2023-01-12T4934: ospf: Fix inter-area route summarizationYuxiang Zhu
Setting something like `protocols ospf area 10 range 10.10.0.0/16` without sub options doesn't work. This is because no range commands are generated when there is no leaf nodes set under the `range` tag node. ``` edit protocols ospf set area 16 network 10.10.0.0/16 set area 16 range 10.10.0.0/16 commit ``` ``` $ vtysh -c 'show run' ! router ospf auto-cost reference-bandwidth 100 timers throttle spf 200 1000 10000 network 10.10.0.0/16 area 16 exit ``` The generated FRR commands above is missing something like: ``` area 16 range 10.10.0.0/16 ```
2023-01-07T4920: ospf: Fix `passive-interface default` optionYuxiang Zhu
`passive_interface` is a leaf node. Also adds a smoketest.
2022-12-02 T4854: route reflector allows to apply route-mapsfett0
2022-11-26ospf: T4739: Adding missing OSPF FRR templateCheeze-It
Adding the parameters that were missing to the OSPF FRR template.
2022-11-13l3VPN : T4182: add l3vpn over gre option from route-mapfett0
2022-10-13T4739: ISIS segment routing being refactoredCheeze_It
2022-10-12ospf: T4707: fix segment-routing Jinja2 template for explicit-null and ↵Christian Poessinger
no-php-flag The nested if statement was not properly evaluated during smoketests making them fail. There is no need to nest the if's - as a simple string can be appended by {{ 'foo' if bar is vyos_defined }}
2022-10-11isis: T4739: ISIS segment routing being refactoredCheeze_It
This is to refactor ISIS segment routing to match up with OSPF segment routing.
2022-10-07ospf: T4707: enable segment-routing on last in FRR configurationChristian Poessinger
2022-10-06ospf: T4707: Add OSPF segment routing for FRRCheeze_It
In this commit we add OSPF segment routing, smoke tests, handlers, FRR template changes, and CLI commands.
2022-10-06Merge pull request #1567 from aapostoliuk/T4660-sagittaChristian Poessinger
policy: T4660: Changed CLI syntax in route-map set community
2022-10-03policy: T4660: Changed CLI syntax in route-map set communityaapostoliuk
Changed CLI syntax in route-map set community, set large-community, set extcommunity Allows to add multiple communities, large-communities and extcommunities in clear view. Added new well-known communities. Added non-transitive feature in extcommunities. Fixed community's validators.
2022-09-30bgp: evpn: T1315: add route-target CLI node <multi/> propertyChristian Poessinger
FRR supports multiple route-targets to be used for import/export: address-family l2vpn evpn route-target import 20:10 route-target import 20:11 route-target import 20:12 route-target import 40:40 route-target export 1:2 route-target export 1:3 route-target export 40:40 exit-address-family Thus the <multi/> property is added to the relevant CLI nodes.
2022-09-18Update protocols_isis.pyCheeze_It
isis: T4693: Fix ISIS segment routing configurations This change is to fix more bugs in which ISIS segment routing was broken due to a refactor. This change also introduces a few additions to the ISIS handler for checking per prefix validations for segment value and mutual exclusivity for two options.
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-21 21:26:33 +0000