summaryrefslogtreecommitdiff
path: root/data/templates/frr
AgeCommit message (Collapse)Author
2022-04-03static: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03vrf/vni: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03rpki: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03rip(ng): T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03policy: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03ospf: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03ospfv3: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03mpls: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03isis: T3156: add segment routing local-block for ISISChristian Poessinger
2022-04-03isis: T4333: fix remaining "is defined" instancesChristian Poessinger
2022-04-03isis: T4336: add support for MD5 authentication password on a circuitChristian Poessinger
2022-04-03isis: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03bfd: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-01bgp: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-03-31bgp: T4326: Add bgp parameter no-suppress-duplicatesViacheslav Hletenko
Add new bgp parameter 'no-suppress-duplicates' set protocols bgp parameters no-suppress-duplicates
2022-03-17OSPF : T4304: Set import/export filter inter-area prefixfett0
2022-03-16frr: T4302: fix Jinja2 template to match new FRR syntaxChristian Poessinger
According to a wrong bug [1] there is no longer a vrf suffix available for interfaces. This got changed in [2] which no longer print vrf name for interface config when using vrf-lite. 1: https://github.com/FRRouting/frr/issues/10805 2: https://github.com/FRRouting/frr/pull/10411
2022-03-15frr: T4302: upgrade to version 8.2Christian Poessinger
2022-03-09policy: T2493 ip-next-hop unchanged & peer-addressPaul Lettington
Also add ipv6-next-hop peer-address
2022-03-03static: T4283: support "reject" routes - emit an ICMP unreachable when matchedChristian Poessinger
2022-02-20static: T4203: obey interface dhcp default route distanceChristian Poessinger
Commit 05aa22dc ("protocols: static: T3680: do not delete DHCP received routes") added a bug whenever a static route is modified - the DHCP interface will always end up with metric 210 - if there was a default route over a DHCP interface.
2022-02-07dhcp: T3600: Fix DHCP static table dhcp-interface routeViacheslav Hletenko
Static table dhcp-interface route required table in template Without table this route will be placed to table 'main' by default
2022-01-19OSPF : T4195: ability to set maximum paths for OSPFfett0
2021-12-26ospfv3: T4107: add support for "default-information originate"Christian Poessinger
2021-12-26ospfv3: T4108: add support for auto-cost parameterChristian Poessinger
2021-12-26ospfv3: T4102: nssa area support both no-summary and default-originateChristian Poessinger
2021-12-25ospfv3: T4102: add support for NSSA area-typeChristian Poessinger
2021-12-12bgp: T3967: add support for conditional advertisementChristian Poessinger
The BGP conditional advertisement feature uses the non-exist-map or the exist-map and the advertise-map keywords of the neighbor advertise-map command in order to track routes by the route prefix. non-exist-map ============= * If a route prefix is not present in the output of non-exist-map command, then advertise the route specified by the advertise-map command. * If a route prefix is present in the output of non-exist-map command, then do not advertise the route specified by the addvertise-map command. exist-map ========= * If a route prefix is present in the output of exist-map command, then advertise the route specified by the advertise-map command. * If a route prefix is not present in the output of exist-map command, then do not advertise the route specified by the advertise-map command. This feature is useful when some prefixes are advertised to one of its peers only if the information from the other peer is not present (due to failure in peering session or partial reachability etc). The conditional BGP announcements are sent in addition to the normal announcements that a BGP router sends to its peer. CLI nodes can be found under: * set protocols bgp neighbor <ip> address-family <afi> conditional-advertisement * set protocols bgp peer-group <p> address-family <afi> conditional-advertisement
2021-12-12bgp: T4069: add "parameters suppress-fib-pending" CLI optionChristian Poessinger
This command is applicable at the global level and at an individual bgp level. If applied at the global level all bgp instances will wait for fib installation before announcing routes and there is no way to turn it off for a particular BGP vrf.
2021-12-12bgp: T4069: add "parameters shutdown" CLI optionChristian Poessinger
Administrative shutdown of all peers of a bgp instance. Drop all BGP peers, but preserve their configurations. The peers are notified in accordance with RFC 8203 by sending a NOTIFICATION message with error code Cease and subcode Administrative Shutdown prior to terminating connections. This global shutdown is independent of the neighbor shutdown, meaning that individually shut down peers will not be affected by lifting it.
2021-12-12bgp: T4069: add "parameters reject-as-sets" CLI optionChristian Poessinger
This command enables rejection of incoming and outgoing routes having AS_SET or AS_CONFED_SET type.
2021-12-12bgp: T4069: add "parameters minimum-holdtime <n>" CLI optionChristian Poessinger
This command allows user to prevent session establishment with BGP peers with lower holdtime less than configured minimum holdtime. When this command is not set, minimum holdtime does not work.
2021-12-12bgp: T4069: add "parameters fast-convergence" CLI optionChristian Poessinger
Whenever BGP peer address becomes unreachable we must bring down the BGP session immediately. Currently only single-hop EBGP sessions are brought down immediately. IBGP and multi-hop EBGP sessions wait for hold-timer expiry to bring down the sessions. This new configuration option helps user to teardown BGP sessions immediately whenever peer becomes unreachable. This configuration is available at the bgp level. When enabled, configuration is applied to all the neighbors configured in that bgp instance.
2021-12-12bgp: T3967: add "parameters conditional-advertisement timer <n>" optionChristian Poessinger
Set the period to rerun the conditional advertisement scanner process. The default is 60 seconds.
2021-12-09ospf(v3): T4058: add support for BFD profilesChristian Poessinger
2021-12-09isis: T4058: add support for BFD profilesChristian Poessinger
2021-12-09bgp: T4058: add support for BFD profilesChristian Poessinger
2021-12-06bfd: T4054: bugfix missing profile assignment to peerChristian Poessinger
2021-12-06mpls: ldp: T3753: add proper indention to Jinja2 templateChristian Poessinger
2021-12-06mpls: ldp: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
2021-12-04bfd: T4043: add support for passive modeChristian Poessinger
Mark session as passive: a passive session will not attempt to start the connection and will wait for control packets from peer before it begins replying. This feature is useful when you have a router that acts as the central node of a star network and you want to avoid sending BFD control packets you don't need to. The default is active-mode
2021-12-04bfd: T3310: add key_mangling option when calling get_config_dict()Christian Poessinger
2021-11-28ospfv3: T3928: add VRF supportChristian Poessinger
set vrf name foo protocols ospfv3
2021-11-27isis: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
2021-11-27rpki: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
2021-11-27ripng: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
2021-11-27rip: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
2021-11-27ospfv3: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
2021-11-27bgp: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
2021-11-27policy: T3753: adjust to new FRR 8.1 syntaxChristian Poessinger
Every node in running config now has an explicit "exit" tag
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 18:42:34 +0000