summaryrefslogtreecommitdiff
path: root/data/templates/frr
AgeCommit message (Collapse)Author
2022-09-18Update protocols_isis.pyCheeze_It
isis: T4693: Fix ISIS segment routing configurations This change is to fix more bugs in which ISIS segment routing was broken due to a refactor. This change also introduces a few additions to the ISIS handler for checking per prefix validations for segment value and mutual exclusivity for two options.
2022-09-15bgp: T4696: add support for "bestpath peer-type multipath-relax"Christian Poessinger
Add new VyOS CLI command: set protocols bgp parameters bestpath peer-type multipath-relax This command specifies that BGP decision process should consider paths from all peers for multipath computation. If this option is enabled, paths learned from any of eBGP, iBGP, or confederation neighbors will be multipath if they are otherwise considered equal cost. [1] [1]: http://docs.frrouting.org/en/stable-8.3/bgp.html#clicmd-bgp-bestpath-peer-type-multipath-relax
2022-09-13isis: T4693: Fix ISIS segment routing configurationsCheeze_It
This change is to fix a bug in which ISIS segment routing was broken due to a refactor. This change also is going to introduce a smoketest to make sure this is caught in the future.
2022-08-22BGP: T4634: Allow configuration of disable-connected-checkSander Klein
2022-07-30bgp: T4257: Changing BGP "local-as" to "system-as"Cheeze_It
bgp: T4257: Changing BGP "local-as" to "system-as" This change is to change the global BGP name for the node "local-as" to "system-as" This is needed so that there's less ambiguity with the local-as feature per neighbor. bgp: T4257: Changing BGP "local-as" to "system-as" bgp: T4257: Changing BGP "local-as" to "system-as" This change is to change the global BGP name for the node "local-as" to "system-as" This is needed so that there's less ambiguity with the local-as feature per neighbor.
2022-06-25dhcp: pppoe: T4384: bugfix not honoring no-default-route CLI optionChristian Poessinger
Commit a2ab95ff68b ("pppoe: T4384: replace default-route CLI option with common CLI nodes already present for DHCP") had an issue as the PPPoE interface options and also DHCP interface options did not honor the no-default-route option. This has been fixed.
2022-06-04Policy: T3976-T4449-nexthop: add - match ipv6 nexthop type - as available ↵Nicolas Fort
for ipv4
2022-05-31IPv6: T3976: add prefix-list and access-list option from ipv6 route-mapfett0
2022-05-29Policy: T4450: Expand options for ip|ipv6 address match. Now support ↵Nicolas Fort
prefix-len on both matches. Also change help properties of route-source node.
2022-05-29eigrp: T2472: add basic template rendering and FRR communicationChristian Poessinger
2022-05-29Merge branch 'T4449' of https://github.com/nicolas-fort/vyos-1x into currentChristian Poessinger
* 'T4449' of https://github.com/nicolas-fort/vyos-1x: Policy: T4449: Extend matching options for route-map ip nexthop
2022-05-28rip: T4448: add support to set protocol version on an interface levelChristian Poessinger
2022-05-28Policy: T4449: Extend matching options for route-map ip nexthopNicolas Fort
2022-05-28rip: T4448: add support for explicit version selectionChristian Poessinger
2022-05-25Merge pull request #1088 from zdc/T4020-sagittaDaniil Baturin
FRR: T4020: Added CLI options for FRR daemons
2022-05-08policy: evpn: T3739: support "set evpn gateway-ip"Christian Poessinger
2022-05-05policy: T4414: add support for route-map "as-path prepend last-as x"Christian Poessinger
2022-04-21pppoe: T4384: replace default-route CLI option with common CLI nodes already ↵Christian Poessinger
present for DHCP VyOS 1.4 still leverages PPPd internals on the CLI. pppd supports three options for a default route, none, auto, force. * none: No default route is installed on interface up * auto: Default route is only installed if there is yet no default route * force: overwrite any default route There are several drawbacks in this design for VyOS and the users. If auto is specified, this only counted for static default routes - but what about dynamic ones? Same for force, only a static default route got replaced but dynamic ones did not got taken into account. The CLI is changed and we now re-use already existing nodes from the DHCP interface configuration: * no-default-route: On link up no default route is installed, same as the previous default-route none * default-route-distance: We can now specify the distance of this route for the routing table on the system. This defaults to 210 as we have for DHCP interfaces. All this will be migrated using a CLI migration script.
2022-04-19pppoe: static: T4379: bugfix default-route lost after applying additional ↵Christian Poessinger
static routes Issue is identical to the problem in T3680 (05aa22dcb4ce) which was for DHCP based routes. Once a static route is added to the system, the PPPoE auto-installed default route is lost.
2022-04-14frr: T4353: fix Jinja2 linting errorsChristian Poessinger
2022-04-12frr: rpki: T4353: add ".j2" file extension on Jinja2 templateChristian Poessinger
2022-04-11T4353: enable linting of Jinja2 templatesChristian Poessinger
2022-04-03static: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03vrf/vni: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03rpki: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03rip(ng): T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03policy: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03ospf: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03ospfv3: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03mpls: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03isis: T3156: add segment routing local-block for ISISChristian Poessinger
2022-04-03isis: T4333: fix remaining "is defined" instancesChristian Poessinger
2022-04-03isis: T4336: add support for MD5 authentication password on a circuitChristian Poessinger
2022-04-03isis: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-03bfd: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-04-01bgp: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-03-31bgp: T4326: Add bgp parameter no-suppress-duplicatesViacheslav Hletenko
Add new bgp parameter 'no-suppress-duplicates' set protocols bgp parameters no-suppress-duplicates
2022-03-17OSPF : T4304: Set import/export filter inter-area prefixfett0
2022-03-16frr: T4302: fix Jinja2 template to match new FRR syntaxChristian Poessinger
According to a wrong bug [1] there is no longer a vrf suffix available for interfaces. This got changed in [2] which no longer print vrf name for interface config when using vrf-lite. 1: https://github.com/FRRouting/frr/issues/10805 2: https://github.com/FRRouting/frr/pull/10411
2022-03-15frr: T4302: upgrade to version 8.2Christian Poessinger
2022-03-09policy: T2493 ip-next-hop unchanged & peer-addressPaul Lettington
Also add ipv6-next-hop peer-address
2022-03-03static: T4283: support "reject" routes - emit an ICMP unreachable when matchedChristian Poessinger
2022-02-20static: T4203: obey interface dhcp default route distanceChristian Poessinger
Commit 05aa22dc ("protocols: static: T3680: do not delete DHCP received routes") added a bug whenever a static route is modified - the DHCP interface will always end up with metric 210 - if there was a default route over a DHCP interface.
2022-02-07dhcp: T3600: Fix DHCP static table dhcp-interface routeViacheslav Hletenko
Static table dhcp-interface route required table in template Without table this route will be placed to table 'main' by default
2022-02-07FRR: T4020: Updated CLI options processing for FRR daemonszsdc
- Reverted changes from `python/vyos/util.py`. This may lead to unnecessary FRR restart during each boot, depending on a default file content and template, but makes this changeset cleaner. - Fixed typos in node names (extra `>` characters). - Added SNMP module for `isisd` and `ldpd`, since they have it compiled now.
2022-01-19OSPF : T4195: ability to set maximum paths for OSPFfett0
2021-12-26ospfv3: T4107: add support for "default-information originate"Christian Poessinger
2021-12-26ospfv3: T4108: add support for auto-cost parameterChristian Poessinger
2021-12-26ospfv3: T4102: nssa area support both no-summary and default-originateChristian Poessinger
2021-12-25ospfv3: T4102: add support for NSSA area-typeChristian Poessinger