summaryrefslogtreecommitdiff
path: root/data/templates/ipsec/swanctl
AgeCommit message (Collapse)Author
2022-02-22Merge pull request #1230 from sever-sever/T1856Christian Poessinger
ipsec: T1856: Ability to set SA life bytes and packets
2022-02-20ipsec: T3948: Add CLI site-to-site peer connection-type noneViacheslav Hletenko
set vpn ipsec site-to-site peer 192.0.2.14 connection-type none
2022-02-20ipsec: T1856: Ability to set SA life bytes and packetsViacheslav Hletenko
set vpn ipsec esp-group grp-ESP life-bytes '100000' set vpn ipsec esp-group grp-ESP life-packets '2000000'
2022-02-19vpn: T4254: Add cisco_flexvpn and install_virtual_ip_on optionsViacheslav Hletenko
Ability to set Cisco FlexVPN vendor ID payload: charon.cisco_flexvpn charon.install_virtual_ip_on swanctl.connections.<conn>.vips = x.x.x.x, z.z.z.z set vpn ipsec options flexvpn set vpn ipsec options virtual-ip set vpn ipsec options interface tunX set vpn ipsec site-to-site peer x.x.x.x virtual-address x.x.x.x
2021-12-31ipsec: T4126: Ability to set priorities for installed policyViacheslav
Add priority for policy based IPSec VPN tunnels If 2 tunnels have the same pair of local and remote traffic selectors (prefixes) it allows to set more preforable install policy from required peer The lowest priority is more preforable
2021-12-28ipsec: T4111: Fix for swanctl configuration IPV6 peersViacheslav
Peer name must not contain dots and colons, otherwise swanct can't generate correct configuration for swanctl.conf This is used in connection names and child SA names Add filter 'dot_colon_to_dash' which replace dots and colons
2021-11-18dmvpn: T4010: Fix template ipsec profile rekey_timeViacheslav
2021-09-19ipsec: T1441: Clean up vti-up-down script for XFRM interfacesLucas Christian
2021-09-18ipsec: vti: T3831: avoid usinf xfrm if_id 0 - implement shift by oneChristian Poessinger
The key defaults to 0 and will match any policies which similarly do not have a lookup key configuration. This means that a vti0 named interface will pull in all traffic and others will stop working. Thus we simply shift the key by one to also support a vti0 interface.
2021-09-15ipsec: T3830: "authentication id|use-x509-id" are mutually exclusiveChristian Poessinger
Manually set peer id and use-x509-id are mutually exclusive!
2021-09-15ipsec: T3830: set connections.<conn>.remote<suffix>.id to "peer" if undefinedChristian Poessinger
Restore "default" behavior from ipsec.conf
2021-09-13ipsec: T3828: Use IKE dh-group when ESP dh-group is set to `enable`sarthurdev
2021-08-27ipsec: T1210: Jinj2 template did not honor inactivity/timeout settingChristian Poessinger
2021-08-20ipsec: T1210: add missing if clause around unique keyChristian Poessinger
2021-08-19ipsec: dmvpn: T3764: bugfix mixed up IKE/ESP lifetime variableChristian Poessinger
IKE lifetime is life_time, and ESP lifetime is rekey_time.
2021-08-19ipsec: T3764: add additional quantifier for IKE and ESP lifetimeChristian Poessinger
Commit 7a873eb6 ("ipsec: T3764: bugfix missing IKE and ESP lifetime values") re-added the lost in translation IKE/ESP rekey values. But it did not specify the unit, which is s(econd).
2021-08-19ipsec: T3764: bugfix missing IKE and ESP lifetime valuesChristian Poessinger
During the migration the IKE and ESP key/re-key lifetime settings got lost in translation. This is now fixed and the values/defaults correspond to VyOS 1.3.
2021-08-10ipsec: T3727: Fix ESP proposals not being set from tunnel esp-groupsarthurdev
2021-07-27ipsec: T3705: bugfix for VTI interfaces no honoring default-esp-groupChristian Poessinger
2021-07-19ipsec: T1210: add "unique" option to specify how to handle multiple connectionsChristian Poessinger
Connection uniqueness policy to enforce. To avoid multiple connections from the same user, a uniqueness policy can be enforced. * never: never enforce such a policy, even if a peer included INITIAL_CONTACT notification * keep: reject new connection attempts if the same user already has an active connection * replace: delete any existing connection if a new one for the same user gets established To compare connections for uniqueness, the remote IKE identity is used. If EAP or XAuth authentication is involved, the EAP-Identity or XAuth username is used to enforce the uniqueness policy instead.
2021-07-19ipsec: T1210: split out pool from remote-access configurationChristian Poessinger
Remote access IP pools can now be defined at a global level and referenced in IPSec remote-access connections. To defined a pool use: set vpn ipsec remote-access pool global-ipv4 name-server '172.16.1.1' set vpn ipsec remote-access pool global-ipv4 prefix '192.168.0.0/24' set vpn ipsec remote-access pool global-ipv6 name-server '2001:db8::1' set vpn ipsec remote-access pool global-ipv6 prefix '2001:db8:1000::/64' A connection can then reference the pool: set vpn ipsec remote-access connection foo pool 'global-ipv4' set vpn ipsec remote-access connection foo pool 'global-ipv6'
2021-07-18ipsec: T1210: remote-access pools can not hold both IPv4 and IPv6 prefixesChristian Poessinger
... this enables a dual-stack IKEv2 VPN deployment.
2021-07-15pki: ipsec: l2tp: T2816: T3642: Move IPSec/L2TP code into vpn_ipsec.py and ↵sarthurdev
update to use PKI.
2021-07-07pki: T3642: Migrate rsa-keys to PKI configurationsarthurdev
2021-07-05ipsec: T1210: T1251: Add more features to remote-access connectionssarthurdev
- Adds client/server authentication methods. - Adds basic verification to remote-access. - Adds DHCP pool and options to remote-access. - Cleanup unused PKI files.
2021-07-04ipsec: T1210: T1251: add "local" traffic-selector include definitionChristian Poessinger
Used by both site2site and remote-access/road-warrior VPN connections.
2021-07-04ipsec: T1210: T1251: extend ra config with address pools/traffic selectorssarthurdev
2021-07-04ipsec: T1210: T1251: IKEv2 road-warrior supportChristian Poessinger
set vpn ipsec esp-group ESP-RW compression 'disable' set vpn ipsec esp-group ESP-RW lifetime '3600' set vpn ipsec esp-group ESP-RW pfs 'disable' set vpn ipsec esp-group ESP-RW proposal 10 encryption 'aes256' set vpn ipsec esp-group ESP-RW proposal 10 hash 'sha256' set vpn ipsec esp-group ESP-RW proposal 20 encryption 'aes256' set vpn ipsec esp-group ESP-RW proposal 20 hash 'sha1' set vpn ipsec ike-group IKE-RW key-exchange 'ikev2' set vpn ipsec ike-group IKE-RW lifetime '10800' set vpn ipsec ike-group IKE-RW mobike 'enable' set vpn ipsec ike-group IKE-RW proposal 10 dh-group '2' set vpn ipsec ike-group IKE-RW proposal 10 encryption 'aes256' set vpn ipsec ike-group IKE-RW proposal 10 hash 'sha1' set vpn ipsec ike-group IKE-RW proposal 20 dh-group '2' set vpn ipsec ike-group IKE-RW proposal 20 encryption 'aes128' set vpn ipsec ike-group IKE-RW proposal 20 hash 'sha1' set vpn ipsec ipsec-interfaces interface 'dum0' set vpn ipsec remote-access rw authentication id 'vyos' set vpn ipsec remote-access rw authentication local-users username vyos password vyos set vpn ipsec remote-access rw authentication x509 ca-certificate 'peer_172-18-254-202' set vpn ipsec remote-access rw authentication x509 certificate 'peer_172-18-254-202' set vpn ipsec remote-access rw description 'asdf' set vpn ipsec remote-access rw esp-group 'ESP-RW' set vpn ipsec remote-access rw ike-group 'IKE-RW'
2021-07-03ipsec: T2816: provide x509 certificate base auth building blocksChristian Poessinger
2021-07-03ipsec: T2816: remove default values from Jinja2 template and place them in XMLChristian Poessinger
VyOS has a known to work mechanism in supplying CLI default values into the Python configuration scripts. This commit removes hardcoded default values from the Jinja2 template and places them into the appropriate XML definitions. The big advantage is that the default value itself and the corresponding help string are located in the exact same file.
2021-07-03ipsec: T2816: rework IKE and ESP key assignmentChristian Poessinger
Commit 2d79a500 ("ipsec: T2816: add Jinja2 converter for ESP/IKE groups to string") added a Jinja2 helper function which can be used to transform VyOS CLI ESP and IKE key proposals into a strongSwan compatible string cipher. This commit changes the IPSec implementation to make use of this new Jinja2 filter fubction/Python helper. This is required base work for better automated tests (smoketests) but also for an IKEv2 road-warrior setup.
2021-07-02ipsec: T2816: adjust Jinja2 template to coding styleChristian Poessinger
* use indent = 2 * prefer 'if foo.bar is defined' over 'if "bar" in foo'
2021-07-01Merge branch 'pki_ipsec' of https://github.com/sarthurdev/vyos-1x into pki-cliChristian Poessinger
* 'pki_ipsec' of https://github.com/sarthurdev/vyos-1x: pki: ipsec: T3642: Update migration script to account for file permission issues pki: ipsec: T3642: Migrate IPSec to use PKI configuration pki: T3642: New PKI config and management
2021-06-29pki: ipsec: T3642: Migrate IPSec to use PKI configurationsarthurdev
2021-06-28ipsec: T1441: switch from vti to xfrm interfacesChristian Poessinger
XFRM interfaces are similar to VTI devices in their basic functionality but offer several advantages: * No tunnel endpoint addresses have to be configured on the interfaces. Compared to VTIs, which are layer 3 tunnel devices with mandatory endpoints, this resolves issues with wildcard addresses (only one VTI with wildcard endpoints is supported), avoids a 1:1 mapping between SAs and interfaces, and easily allows SAs with multiple peers to share the same interface. * Because there are no endpoint addresses, IPv4 and IPv6 SAs are supported on the same interface (VTI devices only support one address family). * IPsec modes other than tunnel are supported (VTI devices only support tunnel mode). * No awkward configuration via GRE keys and XFRM marks. Instead, a new identifier (XFRM interface ID) links policies and SAs with XFRM interfaces.
2021-06-15ipsec: T2816: T645: T3613: Migrated IPsec to swanctl, includes multiple ↵sarthurdev
selectors, and selectors with VTI.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 23:28:53 +0000