summaryrefslogtreecommitdiff
path: root/data/templates
AgeCommit message (Collapse)Author
2021-07-05ipsec: T1210: T1251: Add more features to remote-access connectionssarthurdev
- Adds client/server authentication methods. - Adds basic verification to remote-access. - Adds DHCP pool and options to remote-access. - Cleanup unused PKI files.
2021-07-04ipsec: T1210: T1251: add "local" traffic-selector include definitionChristian Poessinger
Used by both site2site and remote-access/road-warrior VPN connections.
2021-07-04ipsec: T1210: T1251: add remote-access "name-server" definition to pool configChristian Poessinger
2021-07-04ipsec: T1210: T1251: extend ra config with address pools/traffic selectorssarthurdev
2021-07-04ipsec: T1210: T1251: IKEv2 road-warrior supportChristian Poessinger
set vpn ipsec esp-group ESP-RW compression 'disable' set vpn ipsec esp-group ESP-RW lifetime '3600' set vpn ipsec esp-group ESP-RW pfs 'disable' set vpn ipsec esp-group ESP-RW proposal 10 encryption 'aes256' set vpn ipsec esp-group ESP-RW proposal 10 hash 'sha256' set vpn ipsec esp-group ESP-RW proposal 20 encryption 'aes256' set vpn ipsec esp-group ESP-RW proposal 20 hash 'sha1' set vpn ipsec ike-group IKE-RW key-exchange 'ikev2' set vpn ipsec ike-group IKE-RW lifetime '10800' set vpn ipsec ike-group IKE-RW mobike 'enable' set vpn ipsec ike-group IKE-RW proposal 10 dh-group '2' set vpn ipsec ike-group IKE-RW proposal 10 encryption 'aes256' set vpn ipsec ike-group IKE-RW proposal 10 hash 'sha1' set vpn ipsec ike-group IKE-RW proposal 20 dh-group '2' set vpn ipsec ike-group IKE-RW proposal 20 encryption 'aes128' set vpn ipsec ike-group IKE-RW proposal 20 hash 'sha1' set vpn ipsec ipsec-interfaces interface 'dum0' set vpn ipsec remote-access rw authentication id 'vyos' set vpn ipsec remote-access rw authentication local-users username vyos password vyos set vpn ipsec remote-access rw authentication x509 ca-certificate 'peer_172-18-254-202' set vpn ipsec remote-access rw authentication x509 certificate 'peer_172-18-254-202' set vpn ipsec remote-access rw description 'asdf' set vpn ipsec remote-access rw esp-group 'ESP-RW' set vpn ipsec remote-access rw ike-group 'IKE-RW'
2021-07-03ipsec: T2816: remove erroneously added config snipped for road-warriorsChristian Poessinger
Commit 32fab6c7c ("ipsec: T2816: provide esp and ike-group XML building block") by accident added an IKEv2 road-warrior configuration to swanctl template. The config blog was never activate as the CLI nodes are still missing. Still unclean :(.
2021-07-03ipsec: T2816: provide x509 certificate base auth building blocksChristian Poessinger
2021-07-03ipsec: T2816: provide esp and ike-group XML building blockChristian Poessinger
2021-07-03ipsec: T2816: rework log options for debuggingChristian Poessinger
Renamed CLI from "logging log-modes" to "log subsystem" and "logging log-level" to "log level". THat is more human firendly.
2021-07-03ipsec: T2816: remove default values from Jinja2 template and place them in XMLChristian Poessinger
VyOS has a known to work mechanism in supplying CLI default values into the Python configuration scripts. This commit removes hardcoded default values from the Jinja2 template and places them into the appropriate XML definitions. The big advantage is that the default value itself and the corresponding help string are located in the exact same file.
2021-07-03ipsec: T2816: rework IKE and ESP key assignmentChristian Poessinger
Commit 2d79a500 ("ipsec: T2816: add Jinja2 converter for ESP/IKE groups to string") added a Jinja2 helper function which can be used to transform VyOS CLI ESP and IKE key proposals into a strongSwan compatible string cipher. This commit changes the IPSec implementation to make use of this new Jinja2 filter fubction/Python helper. This is required base work for better automated tests (smoketests) but also for an IKEv2 road-warrior setup.
2021-07-02ipsec: T2816: adjust Jinja2 template to coding styleChristian Poessinger
* use indent = 2 * prefer 'if foo.bar is defined' over 'if "bar" in foo'
2021-07-02conntrack: T3535: add support for multiple failsave linksChristian Poessinger
2021-07-02conntrack: T3660: make peer port configurableChristian Poessinger
2021-07-01Merge branch 'pki_ipsec' of https://github.com/sarthurdev/vyos-1x into pki-cliChristian Poessinger
* 'pki_ipsec' of https://github.com/sarthurdev/vyos-1x: pki: ipsec: T3642: Update migration script to account for file permission issues pki: ipsec: T3642: Migrate IPSec to use PKI configuration pki: T3642: New PKI config and management
2021-06-30dhcpdv6: T3658: add support for dhcpdv6 fixed-prefix6Brandon Stepler
2021-06-29pki: ipsec: T3642: Migrate IPSec to use PKI configurationsarthurdev
2021-06-29pppoe-server: T3405: Add interface cache featureDmitriyEshenko
2021-06-28ipsec: T1441: switch from vti to xfrm interfacesChristian Poessinger
XFRM interfaces are similar to VTI devices in their basic functionality but offer several advantages: * No tunnel endpoint addresses have to be configured on the interfaces. Compared to VTIs, which are layer 3 tunnel devices with mandatory endpoints, this resolves issues with wildcard addresses (only one VTI with wildcard endpoints is supported), avoids a 1:1 mapping between SAs and interfaces, and easily allows SAs with multiple peers to share the same interface. * Because there are no endpoint addresses, IPv4 and IPv6 SAs are supported on the same interface (VTI devices only support one address family). * IPsec modes other than tunnel are supported (VTI devices only support tunnel mode). * No awkward configuration via GRE keys and XFRM marks. Instead, a new identifier (XFRM interface ID) links policies and SAs with XFRM interfaces.
2021-06-26nat: T1083: fix Jinja2 templating errorChristian Poessinger
Commit 166d44b3 ("nat: T1083: add translation options for persistent/random mapping of address and port") added support for persistent IP address and port mappings for NAT. Unfortunately one if clause got lost in translation.
2021-06-26nat: T1083: add translation options for persistent/random mapping of address ↵Igor Melnyk
and port Tested using: set destination rule 100 inbound-interface 'eth0' set destination rule 100 translation address '19.13.23.42' set destination rule 100 translation options address-mapping 'random' set destination rule 100 translation options port-mapping 'none' set source rule 1000 outbound-interface 'eth0' set source rule 1000 translation address '122.233.231.12' set source rule 1000 translation options address-mapping 'persistent' set source rule 1000 translation options port-mapping 'fully-random'
2021-06-25openvpn: T1704: drop deprecated disable-ncp optionChristian Poessinger
2021-06-24openvpn: T1512: T3641: drop deprecated "compat-names" optionChristian Poessinger
2021-06-24openvpn: T3641: remove deprecated iproute optionChristian Poessinger
Executing iproute2 commands as unprivileged member of the openvpn group is now handled via a sudoers file.
2021-06-16bgp: T3624: add "bandwidth" bestpath optionChristian Poessinger
2021-06-16policy: T3624: add extended community bandwith support to route-mapChristian Poessinger
2021-06-16policy: T3631: migrate "set extcommunity-rt/soo" to "set extcommunity rt|soo"Christian Poessinger
Thi adds a new configuration level "set extcommunity" which then holds rt and soo als leaf-nodes below. This is the foundational work required to properly implement T3624 ("BGP: add support for extended community bandwidth definition")
2021-06-15ipsec: T2816: T645: T3613: Migrated IPsec to swanctl, includes multiple ↵sarthurdev
selectors, and selectors with VTI.
2021-06-13snmp: T3606: fix unknown notification OIDChristian Poessinger
Commit 945300c6f5 ("snmp: mibs: import from vyatta-cfg-system") imported the MIBs from vyatta-cfg-system and provided them with a symlink to /usr/share/vyos/mibs. The symlink was never installed as the directory already existed. Adjust the MIBDIRS environment variable to load the MIBs from the proper VyOS folder and use no symlink at all.
2021-06-13wwan: T3620: rename "wirelessmodem wlm" interfaces to new wwan interface treeChristian Poessinger
2021-06-12ipsec: T57: Support disable on peer, tunnel, dmvpn profilesarthurdev
2021-06-12ipsec: T1501: T3617: Add handling for missing addresses on boot when using ↵sarthurdev
dhcp-interface
2021-06-08policy: T3605: add support to prefer IPv6 global next-hop address in route-mapChristian Poessinger
2021-06-07nhrp: T3599: adjust Jinja2 template to common style patternChristian Poessinger
2021-06-07ipsec: T2816: adjust Jinja2 template to common style patternChristian Poessinger
2021-06-06nhrp: T3599: Migrate NHRP to XML/Pythonsarthurdev
2021-06-03pppoe-server: T3593: Change called-sid position in templateEshenko Dmitriy
2021-06-01pppoe-server: T3593: Add extended-scripts featureEshenko Dmitriy
2021-05-31ipsec: T2816: Continued refactor, added proper ipsec-interfaces handlingSimon
2021-05-30bgp: T3590: limiting maximum number of prefixes to be sent to a peerChristian Poessinger
2021-05-29vti: ipsec: T2816: Fix vti-up-downsarthurdev
2021-05-28ipsec: T2816: IPSec python rework, includes DMVPN and VTI supportSimon
2021-05-27conntrack: T3579: initial implementation with XML and PythonChristian Poessinger
2021-05-24isis: T3576: add IPv6 supportChristian Poessinger
2021-05-24isis: T3417: add CLI node to enable "log-adjacency-changes"Christian Poessinger
2021-05-24isis: T3417: ease Jinja2 template code for is-typeChristian Poessinger
2021-05-24isis: T3417: implement domain-password md5Christian Poessinger
2021-05-24isis: T3576: support metric and route-map when originating a default routeChristian Poessinger
2021-05-23router-advert: T3561: add support for specific routesMark Royds
Co-authored-by: Mark Royds <mark.royds@vitaminit.co.uk>
2021-05-22bgp: T3565: support multiple AS numbers for confederation peersChristian Poessinger
The BGP confederation peers node was not a multi node as supported by VyOS 1.2 and 1.3.