| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
Now that MSS clamping is done on the "per-interface" level the entire PPPoE
stuff would have needed to get a full copy in GNU BASH for this or, participate
in the common library.
Add a new PPP ip-up script named 99-vyos-pppoe-callback which will call the
vyos.ifconfig.PPPoEIf.update() function to configure everything as done with
all other interfaces. This removes duplicated code for VRF assignment and route
installation when a PPPoE interface is brought up or down.
|
|
|
|
This adds the following new commands:
set protocols bgp address-family ipv4-unicast route-map vpn export foo-map-out
set protocols bgp address-family ipv4-unicast route-map vpn import foo-map-in
set protocols bgp address-family ipv6-unicast route-map vpn export foo-map-out
set protocols bgp address-family ipv6-unicast route-map vpn import foo-map-in
|
|
|
|
IKE lifetime is life_time, and ESP lifetime is rekey_time.
|
|
Commit 7a873eb6 ("ipsec: T3764: bugfix missing IKE and ESP lifetime values")
re-added the lost in translation IKE/ESP rekey values. But it did not specify
the unit, which is s(econd).
|
|
During the migration the IKE and ESP key/re-key lifetime settings got lost in
translation. This is now fixed and the values/defaults correspond to VyOS 1.3.
|
|
|
|
Add the following new commands:
* set protocols bgp address-family ipv4-unicast route-target vpn both 1.1.1.1:100
* set protocols bgp address-family ipv4-unicast route-target vpn export 1.1.1.1:100
* set protocols bgp address-family ipv4-unicast route-target vpn import 1.1.1.1:100
|
|
|
|
Add the following new commands:
* set protocols bgp address-family ipv4-unicast rd vpn export
* set protocols bgp address-family ipv6-unicast rd vpn export
|
|
|
|
Add the following new commands:
* set protocols bgp address-family ipv4-unicast label vpn export (auto | 0-1048575)
* set protocols bgp address-family ipv6-unicast label vpn export (auto | 0-1048575)
|
|
convention
|
|
template
This triggered a bug during smoketesting.
File "/usr/share/vyos/templates/proxy-ndp/ndppd.conf.tmpl", line 24, in top-level template code
{% if config.translation.address is defined and config.translation.address | is_ip_network %}
File "/usr/lib/python3/dist-packages/jinja2/environment.py", line 471, in getattr
return getattr(obj, attribute)
jinja2.exceptions.UndefinedError: 'dict object' has no attribute 'translation'
|
|
|
|
|
|
|
|
|
|
FRR supports configuring either network prefixes per area, or assign an
interface to an area to participate in the routing process. This is already well
known from other venders and supported by FRR.
A valid VyOS OSPF configuration would then look like:
vyos@vyos# show protocols
ospf {
interface dum0 {
area 0
}
interface eth0.201 {
area 0
authentication {
md5 {
key-id 10 {
md5-key vyos
}
}
}
dead-interval 40
hello-interval 10
priority 1
retransmit-interval 5
transmit-delay 1
}
log-adjacency-changes {
detail
}
parameters {
abr-type cisco
router-id 172.18.254.201
}
passive-interface default
passive-interface-exclude eth0.201
}
|
|
|
|
When removing bgp (vrf) instances the assigned VRF vni must be deleted from FRR
prior the removal of the bgp settings (T3734).
This is now done by moving the CLI command "set vrf name red vni 1000" to a
dedicated Python script with a priority higher then bgp.
|
|
policy: T3673: Add set large-comm-list for route-map
|
|
|
|
|
|
ipsec: T3727: Fix ESP proposals not being set from tunnel esp-group
|
|
|
|
|
|
|
|
This reverts commit a2b959c50c96698da173b9c4720369a51442cc5c.
|
|
|
|
|
|
Commit 472c9568 ("isis: T3693: Adding IPv6 redistribution to ISIS") did not
pass rendering, am exception got thrown:
jinja2.exceptions.UndefinedError: 'dict object' has no attribute 'protocol'
This commit fixes the templateing code.
|
|
isis: T3693: Adding IPv6 redistribution to ISIS
|
|
In this commit we add the ability to redistribute into
ISIS for IPv6 address family.
|
|
bgp: T1176: Add solo option for neighbor
|
|
|
|
|
|
|
|
|
|
$ generate ipsec mac-ios-profile <connection> remote <ip>
|
|
set vpn ipsec remote-access connection rw authentication client-mode 'eap-radius'
set vpn ipsec remote-access connection rw authentication id '192.0.2.1'
set vpn ipsec remote-access connection rw authentication server-mode 'x509'
set vpn ipsec remote-access connection rw authentication x509 ca-certificate 'CAcert_Class_3_Root'
set vpn ipsec remote-access connection rw authentication x509 certificate 'vyos'
set vpn ipsec remote-access connection rw esp-group 'ESP-RW'
set vpn ipsec remote-access connection rw ike-group 'IKE-RW'
set vpn ipsec remote-access connection rw local-address '192.0.2.1'
set vpn ipsec remote-access connection rw pool 'ra-rw-ipv4'
set vpn ipsec remote-access connection rw unique 'never'
set vpn ipsec remote-access pool ra-rw-ipv4 name-server '192.0.2.2'
set vpn ipsec remote-access pool ra-rw-ipv4 prefix '192.168.22.0/24'
set vpn ipsec remote-access radius nas-identifier 'fooo'
set vpn ipsec remote-access radius server 172.16.100.10 key 'secret'
|
|
As this is only related to remote-access, keeping it under "options" simply
feels wrong.
|
|
|
|
|
|
|
|
generate ipsec mac-ios-profile <connection> remote <ip|fqdn>
will generate a matching IPSec profile which can be loaded on an iOS device.
|
