summaryrefslogtreecommitdiff
path: root/data/templates
AgeCommit message (Collapse)Author
2020-12-06dhcp: T2562: add "listen-address" CLI node for better DHCP relay supportChristian Poessinger
Running ISC DHCP server as backend server for multiple pools served to relay agents requires DHCPd to explicitly listen on give interfaces or a "transit" subnet declaration facing the network where we receive the DHCPREQ messages on. This implements a new "listen-address" CLI node, the given address is validated if it is assigned to the system and upon success, a proper "subnet { }" statement is added into dhcpd.conf
2020-12-06dhcp: T3113: bugfix for multiple domain-search entriesChristian Poessinger
While rewriting the code to get_config_dict() in commit 84b7ade286 ("dhcp: T3100: migrate server configuration to get_config_dict()") a regression was added not properly joining strings when multiple search-somains had been given. Wrong: domain-search "domain1, domain2"; Correct: domain-search "domain1", "domain2";
2020-12-04dhcp: T3100: migrate server configuration to get_config_dict()Christian Poessinger
2020-12-04pppoe: T3112: drop "ipv6 enable" optionChristian Poessinger
IPv6 enable can be considered once the ipv6 node is present!
2020-12-03Merge pull request #630 from sever-sever/T1316Christian Poessinger
isis: T1316: Fix isis delete section. Use an updated frr framework
2020-12-03isis: T1316: Fix isis delete section. Use an updated frr frameworksever-sever
2020-12-03hostsd: T3105: fix wrong new-line handling after template processor changeChristian Poessinger
Commit c87ad948999 ("vyos.template: T2720: fix remaining in-line time_block syntax") did not take into account when there is an if/endif statement on one line, the following new-line will be discarded.
2020-12-01smoketest: dhcp: T3100: add testcase for static host mappingsChristian Poessinger
2020-12-01dhcp: T3100: fix template indention levelsChristian Poessinger
2020-12-01dhcpv6: T1433: combine templates for v4 and v6Christian Poessinger
2020-11-29dhcpv6-relay: T3095: improve verify()Christian Poessinger
- Upstream interfaces require a DHCPv6 server to be configured - Listen interface must have a a global unicast address assigned, else ISC dhcrelay won't start.
2020-11-29dhcpv6-relay: T3095: migrate service to get_config_dict()Christian Poessinger
2020-11-29smoketest: dhcp-relay: T3095: remove non referenced function from unittestChristian Poessinger
2020-11-29ntp: T2297: support configuration of NTP poolChristian Poessinger
set system ntp server <server> pool
2020-11-29dhcp-relay: T3095: migrate service to get_config_dict()Christian Poessinger
2020-11-29smoketest: dhcp-relay: T3095: initial testsChristian Poessinger
2020-11-28nat: T3092: migrate to get_config_dict()Christian Poessinger
The NAT system consists out of nested tag nodes which makes manual parsing very hard. This is a perfect candidate for migrating this to get_config_dict() as there is already a smoketest in place. In addition this should make it easier to add features like static nat/hairpin.
2020-11-28vyos.template: T2720: fix remaining in-line time_block syntaxChristian Poessinger
Commit a2ac9fac ("vyos.template: T2720: always enable Jinja2 trim_blocks feature") globally enabled the trim_blocks feature. Some templates still used in-line trim_blocks "{%"- or "-%}" which caused miss-placed line endings. This is fixed by removing all in-line trim_block statememnts of Jinja2 templates.
2020-11-27vyos.template: T2720: fix resolv.conf trim blocksChristian Poessinger
After commit a2ac9fac16eeb626d3969092fecf463650750640 remove no longer required template trim block statements.
2020-11-27igmp-proxy: T3088: migrate to get_config_dict()Christian Poessinger
2020-11-23mpls: T915: drop superfluous "-%}" from Jinja2 templateChristian Poessinger
Trimming blocks manually is not needed as the renderer is already called with the 'trim_blocks' option.
2020-11-23openvpn: T3074: fix site-2-site operation modeChristian Poessinger
When rendering the configs "ifconfig" statement wrong IP addresses have been used for the "tun" operating mode. This has been corrected.
2020-11-23Merge pull request #616 from Cheeze-It/currentChristian Poessinger
mpls-conf: T915: Refactored template, handler, added global features
2020-11-22mpls-conf: T915: Refactored FRR LDP template, MPLS handler, added MPLS ↵Cheeze_It
global features So this is a big update. The first thing that was done was a refactor to the FRR LDP template, MPLS handler, and XML conf tree MPLS global additions. The refactors should work and I did test them in my lab. It seems that everything does work as needed so far in my testing. There is something here that is considered configuration breaking from the old setup though. In the old setup the MPLS interface operation (as in the interfaces accepting MPLS labels and processing them) was tied with LDP. What this means is that MPLS processing was enabled at the same time as LDP interfaces were configured. We do not want this behavior for the future as there's other MPLS underlay technologies like SR and RSVP. If someone wants to enable SR or RSVP without enabling LDP then they now can. Before, they couldn't. The other additions are global changes to MPLS TTL propagation and MPLS max TTL enforcement. They have now been added. Lastly, there is an frr-reload bug that Runar Borge found with this. We have found that when totally deleting LDP that there has to be 3 commits done. This is because frr-reload doesn't properly do what it needs to do in 1 operation so we had to do 3. This will only affect people that are doing an entire LDP clear using "delete protocols mpls ldp." Otherwise it isn't seen. Anyway, this refactor now works with the FRR daemon directly for all changes. This also makes it much easier for adding stuff in the future. Thank you
2020-11-22bgp: T2174: refactor Jinja template and reduce redundant pathsChristian Poessinger
The Jinja2 template contained a lot of redundant paths which only differed in either the address-family or neighbor vs. peer-group. This paths have been combined into for loops and a macro for generating a neighbor statement as peer-groups and regular neighbors share ~95% of the config.
2020-11-22openvpn: T3080: add missing multiplication on keepalive config optionChristian Poessinger
2020-11-21openvpn: T3060: fix client authentication username and password fileChristian Poessinger
2020-11-21openvpn: T3060: always listen op IPv4 and IPv6 socketsChristian Poessinger
2020-11-18Revert "wireless: T2241: add "wds" CLI option"Christian Poessinger
This reverts commit 806f35b5856c3f8dae634718a6a9e82cc90bb63a. Unfortunately this did not work our in the attempt to bridge a station to a bridge "brX" interface. Also adjusting the wireless interface during operation cause several exceptions and the feature is removed again as it was never in any production system.
2020-11-14openvpn: T2550: default connection protocol to udpChristian Poessinger
setting this to udp will allow both IPv4 and IPv6 connections. According to the MAN page: proto indicates the protocol to use when connecting with the remote, and may be "tcp" or "udp". For forcing IPv4 or IPv6 connection suffix tcp or udp with 4/6 like udp4/udp6/tcp4/tcp6.
2020-11-13isis: T1316: refactor config retrieval and Jinja2 templateChristian Poessinger
Make the entire template code more human readable by denesting it, as there can only be one ISIS daemon instance in FRR.
2020-11-13Merge branch 'T1316_october' of https://github.com/sever-sever/vyos-1x into ↵Christian Poessinger
t1616-isis * 'T1316_october' of https://github.com/sever-sever/vyos-1x: isis: T1316: October steps
2020-11-13openvpn: T3060: fix CLI to real config mapping for protocol nodeChristian Poessinger
2020-11-13vyos.template: provide general is_ip(v4|v6) helpersChristian Poessinger
We had two places were the is_ip, is_ipv4 and is_ipv6 helpers had been defined. All places now have been converged into vyos.template as they are used both in the Jinja2 templates and also in our scripts.
2020-11-13openvpn: T3051: fix creation of ifconfig-pool for client communicationChristian Poessinger
2020-11-13wwan: T3065: add IPv6 support for wirelessmodem interfacesChristian Poessinger
2020-11-11 mpls-conf: T915: Add MPLS misc parameters, add LDP misc parametersCheeze-It
This commit has to do with the addition of miscellaneous MPLS parameters, as well as miscellaneous LDP parameters. Per c-po, for miscellaneous options and whatnot that do not fit anywhere we will put them into a specific "parameters" node. I also did some global linux configuration changes here. We make changes to kernel options "net.mpls.ip_ttl_propagate" and "net.mpls.default_ttl" which should allow the behavior of VyOS to have the same as routers from the big vendors. I added two LDP options for cisco interoperation TLV and for a dual stack preference. Lastly, I went through and changes some of the help/description fields in the definitions page because I just felt they weren't uniform and the words seemed to not properly explain what they were doing. I also did some code clean up (or tried to...) with comments and whatnot.
2020-11-08mpls-conf: T915: Add targeted LDP neighbors with parametersCheeze_It
The commit has to do with the addition of targeted LDP neighbors and parameters being added. FRR allows for this functionality and I just wanted to add it. We have basically 4 options that are added. Enabling targeted LDP functionality, the targeted neighbor, the hello interval of targeted sessions, and the hold time of targeted sessions. Both IPv4 and IPv6 has been coded in.
2020-11-07interfaces: dhcp-client: T2997: add option to not request DHCP router addressChristian Poessinger
Some might want to have an IP address handed out by a DHCP server but not want a default route to be installed. This can be done using the CLI command: "set interfaces ethernet eth2 dhcp-options no-default-route"
2020-11-06openvpn: T3051: fix multiple pushed routes to preconfigured clientsChristian Poessinger
2020-11-04mpls-conf: T915: Add session hold time adjustment for static LDP neighborsCheeze_It
The commit has to do with the addition of session hold time parameter for LDP neighbors. This allows for being able to change said hold time on a static neighbor. The way that this works is to have it either delegated to a value (15-65535), or to just be default to whatever FRR stipulates or per the other session configuration values. I opted to remove the "-ipv4-" only because we know it's an IPv4 session that one has to create first. I figure it's redundant to add it there so I removed it.
2020-11-04mpls-conf: T915: Add TTL security for static LDP neighborsCheeze_It
The commit has to do with the addition of TTL security for LDP neighbors. The code was 90% done by Viascheslav. I modified it a little bit to get it to properly work. We added more parameters to the neighbors dynamic loop. Once this is merged then we should be able to add more for the dynamic neighbor statements. The way that this works is to have either TTL disabled, or to add the amount of hops accepted for the neighbor.
2020-11-03Merge branch 'wifi-wpa3' of github.com:c-po/vyos-1x into currentChristian Poessinger
* 'wifi-wpa3' of github.com:c-po/vyos-1x: wireless: T3042: move wifi-regulatory-domain into individual interface definition wireless: T2653: reset wireless priority to crux state wireless: T3034: add WPA3 support wireless: T3043: rename "wpa mode both" to "wpa+wpa2" ifconfig: T2985: fix wireless-bridge creation
2020-11-03wireless: T3042: move wifi-regulatory-domain into individual interface ↵Christian Poessinger
definition
2020-11-03Merge pull request #585 from Cheeze-It/currentChristian Poessinger
mpls-conf: T915: Separate IPv4 and IPv6 hello timers, add IPv6 timers
2020-11-03wireless: T3034: add WPA3 supportChristian Poessinger
2020-11-03wireless: T3043: rename "wpa mode both" to "wpa+wpa2"Christian Poessinger
2020-11-03ifconfig: T2985: fix wireless-bridge creationChristian Poessinger
2020-11-03bgp: T2850: Fixing the priority of template processing and missing paramssever-sever
2020-11-02Merge pull request #589 from sever-sever/T2387Christian Poessinger
bgp-xml: T2387: Fix validators and add capability for new format bgp