summaryrefslogtreecommitdiff
path: root/data/templates
AgeCommit message (Collapse)Author
2023-07-16syslog: T2778: fix invalid handling of logrotate and default valuesChristian Breunig
There was no /var/log/messages handler for logrotate making rsyslog crash after a few days. In addition we had some JIna2 templating errors for hosts, user and file CLI nodes jinja2.exceptions.UndefinedError: 'dict object' has no attribute 'facility' Looks like therey are used rarely ;) - lucky me!
2023-07-12bgp: T5338: simplify XML and code handlingChristian Breunig
2023-07-12Merge pull request #2085 from aapostoliuk/T5338-sagittaChristian Breunig
bgp: T5338: Added 'protocols bgp interface <int> mpls forwarding' feature
2023-07-11bgp: T5338: Added 'protocols bgp interface <int> mpls forwarding' featureaapostoliuk
Added 'protocols bgp interface <int> mpls forwarding' feature. It is possible to permit BGP install VPN prefixes without transport labels. This configuration will install VPN prefixes originated from an e-bgp session, and with the next-hop directly connected.
2023-07-11T5341: HA migrate virtual-server tag to node addressViacheslav Hletenko
Migrate: high-availability virtual-server 203.0.113.1 to: high-availability virtual-server <name> address 203.0.113.1
2023-07-06VPP: T1797: Optimized memory allocation during startupzsdc
- changed memory requirement from total to available. This allows to start on systems with less total memory and protects from startup on systems with overloaded memory. - prevent startup if sysctl settings were not applied. This protects from situations when the system cannot allocate enough hugepages or apply other sysctl settings.
2023-07-03Merge pull request #2069 from sever-sever/T5333Christian Breunig
T5333: Set prefix UD for PBR generated user-defined chain names
2023-07-03ospf: T5334: add support for external route summarisation Type-5 and Type-7 LSAsChristian Breunig
* set protocols ospf aggregation timer <seconds> * set protocols ospf summary-address x.x.x.x/x [tag 1-4294967295] * set protocols ospf summary-address x.x.x.x/x no-advertise
2023-07-03T5333: Set prefix UD for PBR generated user-defined chain namesViacheslav Hletenko
We cannot use some specific names like POSTROUTING/PREROUTING as for PBR they overlaps with VyOS defined chains Chains aftoconfigured by VyOS itself: chain VYOS_PBR_PREROUTING chain VYOS_PBR_POSTROUTING If we try to use chain name "POSTROUTING" it generates 2 chains with the same name "chain VYOS_PBR_POSTROUTING" one is autoconfigured and the second defined by user set policy route POSTROUTING rule 100 Add the user-defined (UD) prefix to separate user defined names That allows to use any user-defined names
2023-07-01T1797: VPP verify minimal installed memory and apply sysctlViacheslav Hletenko
Do not allow configure VPP if on the systems with low amount installed memory Add sysctl VPP parameters (hugepages, kernel.shmmax)
2023-06-29Merge pull request #2059 from sever-sever/T1797-vppChristian Breunig
T1797: Add initial vpp configuration
2023-06-27T1797: Add initial vpp configurationViacheslav Hletenko
Add initial configuration mode for VPP (PoC) set vpp cpu corelist-workers '2' set vpp cpu main-core '1' set vpp interface eth1 num-rx-desc '256' set vpp interface eth1 num-rx-queues '512' set vpp interface eth1 num-tx-desc '256' set vpp interface eth1 num-tx-queues '512' set vpp interface eth1 pci '0000:02:00.0' set vpp interface eth1 rx-mode 'polling' set vpp interface eth2 pci '0000:08:00.0' Limitation: - 'set vpp interface ethX pci auto' works only per first commit, then interface detached from default stack and creates tun interface 'ethX' to communicate with default stack. In this case we can't get PCI address via ethtool for 'tun' interfaces. But we can set pci address manualy. - Interface sync between default stack and VPP-DPDK stack After vpp change it doesn't trigger iproute2 for changes (should be written later) I.e. if we change something in vpp per each commit it restarts vpp.service it gets empty interface config as we don't configure vpp directly and it should be configured via iproute2 But then if we do any change on interface (for example description) it gets IP address, MTU, state, etc.
2023-06-26vrrp: T5315: add support to explicitly specify versionChristian Breunig
set high-availability vrrp group <name> version 2|3
2023-06-22tacacs: T141: initial implementationChristian Breunig
2023-06-09dns: T5144: Explicitly override ddclient global options for reliabilityIndrajit Raychaudhuri
- For option 'web', ddclient defaults to 'dyndns' which doesn't support ssl. This results ddclient process lockup till connection to checkip.dyndns.org:443 times out. - For option 'use', ddclient defaults 'ip'. This results in confusing message "WARNING: '' is not a valid IPv4 or IPv6 address" in log.
2023-06-09dns: T5144: Skip clearing 'PIDFile' in ddclient systemd overrideIndrajit Raychaudhuri
'PIDFile' option in 'Service' isn't multi-value and thus doesn't need to be cleared before overriding.
2023-06-06mdns: T5227: Refactor smoke tests for mdns-repeaterIndrajit Raychaudhuri
Changes: - Load generate 'avahi-daemon.conf' and validate basic configs - Add tests for browsing domains and reflect-filter services
2023-06-04dns: T5144: Streamline ddclient systemd service overrideIndrajit Raychaudhuri
Templatize systemd override for ddclient service and move the generated override files in /run. This ensures that the override files are always generated afresh after boot. Additionally, simplify the systemd override file by removing the redundant/superfluous overrides.
2023-06-04dns: T5144: Add pid and cache config as ddclient globalIndrajit Raychaudhuri
2023-06-04dns: T5144: Relocate ddclient template path for consistency with config pathIndrajit Raychaudhuri
2023-06-03dns: T5144: Modernize dynamic dns operationIndrajit Raychaudhuri
Apply next round of configuration tree updates to 'service dns dynamic' with the following changes: - Migrate `service dns dynamic interface <interface> [use-web]` to `service dns dynamic address <interface>` or `service dns dynamic address web [web-options]` This communicates the intent that dynamic dns IP address is detected in only one way - using the `<interface>` or using an external web request, not both. - When using external web request, (`service dns dynamic address web`), external url is optional (`web-options url`). Ddclient defaults are used when unspecified, - Rename all config `login` to `username` for consistency and also to align better with alternative ddclient backends in consideration. - Apply global 'ipv6-enable' to per service 'ip-version: ipv6'. Selecting usage of IPv4 or IPv6 (or both simultaneously) is now at per service (protocol) level instead of global level. This allows more control on the ability to select IPv4 in some cases and IPv6 in some other cases wherever supported by the underlying ddclient protocol. - While the IP address (and by extension, the detection mechanism) is global, the way it is applied to a particular ddclient protocol depends on whether it supports IPv4 or IPv6 or both. - Related to the above, this also prevents generating incorrect config file (`ddclient.conf`) with multiple global sections leading to an unpredictable behavior of ddclient. - Implement provider (protocol) specific custom tweaks whenever possible (e.g., `zone`, `username`, `server` are not necessary in all cases). - Move service name from a combination of 'protocol' (with protocol config autodetected) and custom (with protocol config specified) to a single 'service' key. This allows for consisent setup of multiple config for the same ddclient protocol (with different options and credentials). This also avoid ambiguity with usual networking term 'protocol' and ddclient specific term 'protocol' (and can change with a move to a different backend). - Apply upfront XML constraints and validations consistently wherever applicable. - RFC2136 specific change: Rename rfc2136 config `record` to `host-name` for consistency. - Cloudflare specific change: While ddclient still supports authenticating with email and global auth key, skipping `username` in config will indicate the intent to use API token authentication (with special 'token' literal as `username`).
2023-06-03T5257: Fix netflow VRF and bracketize v6 source addresses for netflow/sflowWered
2023-05-28container: T5003: add new mandatory option runrootChristian Breunig
2023-05-19T5230: remove trailing tabs causing j2lint errorJohn Estabrook
2023-05-19Merge pull request #2014 from ServerForge/currentChristian Breunig
T5230: Added missing enforce-first-as option to bgp protocol common c…
2023-05-19T5230: Added missing enforce-first-as option to bgp protocol common config ↵Wered
and frr bgp jinja template.
2023-05-19T5222: reverse-proxy add send-proxy option for backend serverViacheslav Hletenko
To accept a Proxy Protocol header on incoming TCP connections, add an accept-proxy parameter to the bind line in a frontend section. This parameter detects both Proxy Protocol version 1 (text format) and Proxy Protocol version 2 (binary format). set load-balancing reverse-proxy backend <tag> server <tag> send-proxy
2023-05-19T5222: reverse-proxy fix template for listen-addressViacheslav Hletenko
Load-balancing reverse-proxy listen-address is multi-value node Use bracketize for correct set bind config for IPv6 addresses Listen by default IPv4 and IPv6 if listen-address is not defined
2023-05-19T5222: Refactoring load-balancing reverse-proxyViacheslav Hletenko
Improve and refactoring "load-balancing reverse-proxy" - replace 'reverse-proxy server <tag>' => 'reverse-proxy service <tag>' - replace 'reverse-proxy global-parameters tls <xxx>' => 'reverse-proxy global-parameters tls-version-min xxx' => 'reverse-proxy global-parameters ssl-bind-ciphers xxx' - replace 'reverse-proxy service https rule <tag> set server 'xxx' => 'reverse-proxy service https rule <tag> set backend 'xxx' 'service https rule <tag> domain-name xxx' set as multinode
2023-05-17Merge pull request #2004 from sever-sever/T5222Christian Breunig
T5222: Add load-balancing for web traffic
2023-05-17T5222: Add load-balancing for web trafficViacheslav Hletenko
2023-05-17mdns: T5227: Add support for browse domains and service filtersIndrajit Raychaudhuri
Allow listing additional browse domains (in addition to the default 'local') so that custom domains can be reflected. Additionally, allow filtering the services that are allowed to be reflected across multiple (V)LANs.
2023-05-12ocserv: T3896: improve XML definition and add warning about 3rd party configsChristian Breunig
When enabling identity-based-config, users can add arbitrary config keys that are processed by ocserv. The user "must know" what he is been doing, as invalid config option will make the ocserv daemon go ... whoop! Thus add a warning and inform the user about this setting.
2023-05-12T2778: Fix syslog octet_counted formatBᴇʀɴᴅ Sᴄʜᴏʀɢᴇʀs
2023-05-12Merge pull request #1783 from PeppyH/T3896-ocserv-config-per-xChristian Breunig
ocserv: T3896: add CLI options to configure ocserv config-per-user/group
2023-05-12T5219: ddclient: Cloudflare doesn't require loginZen3515
2023-05-10Merge pull request #1987 from dmbaturin/T5251-vrrp-group-pingChristian Breunig
T5215: add a built-in ping check for VRRP groups
2023-05-10vrrp: T5215: Add built-in ping check for VRRP groupsDaniil Baturin
2023-05-10T5213: Add accounting-interim-interval option for PPTP-serverViacheslav Hletenko
Add RADIUS accounting-interim-interval option for PPTP-server Specifies interval in seconds to send accounting information (may be overridden by radius Acct-Interim-Interval attribute) set vpn pptp remote-access authentication radius accounting-interim-interval '52'
2023-05-10T5213: Add accounting-interim-interval option for L2TP-serverViacheslav Hletenko
Add RADIUS accounting-interim-interval option for L2TP-server Specifies interval in seconds to send accounting information (may be overridden by radius Acct-Interim-Interval attribute) set vpn l2tp remote-access authentication radius accounting-interim-interval '120'
2023-05-09Merge pull request #1978 from zdc/T5190-sagittaChristian Breunig
cloud-init: T5190: Added Cloud-init pre-configurator
2023-05-09Merge pull request #1985 from c-po/t2778-syslogChristian Breunig
syslog: T2778: T2769: refactoring and VRF support
2023-05-09T5213: Add accounting-interim-interval option for PPPoE IPoE SSTPViacheslav Hletenko
Add RADIUS accounting-interim-interval option for PPPoE/IPoE/SSTP servers. Specifies interval in seconds to send accounting information (may be overridden by radius Acct-Interim-Interval attribute) set service pppoe-server authentication radius accounting-interim-interval '60'
2023-05-08syslog: T2769: add VRF supportChristian Breunig
Allow syslog messages to be sent through a VRF (e.g. management).
2023-05-08syslog: T2778: migrate to get_config_dict()Christian Breunig
2023-05-04cloud-init: T5190: Added Cloud-init pre-configuratorzsdc
Added a new service that starts before Cloud-init, waits for all network interfaces initialization, and if requested by config, checks which interfaces can get configuration via DHCP server and creates a corresponding Cloud-init network configuration. This protects from two situations: * when Cloud-init tries to get meta-data via eth0 (default and fallback variant for any data source which depends on network), but the real network is connected to another interface * when Cloud-init starts simultaneously with udev and initializes the first interface to get meta-data before it is renamed to eth0 by udev
2023-05-04Merge pull request #1973 from sever-sever/T5171Christian Breunig
T5171: Use XML for loadbalancing wan instead of old templates
2023-05-02T5171: Rewrite load-balancing wan to XML and python3Viacheslav Hletenko
Use XML and python3 for 'load-balancing wan' Use Jinja2 templates instead of old vyatta-wanloadbalance.pl to generate configuration '/run/load-balance/wlb.conf' wich used by /opt/vyatta/sbin/wan_lb
2023-05-02T5163: Add match protocol filter for route-mapViacheslav Hletenko
Ability to match 'source-protocol' for the route-map filters set policy route-map foo rule 10 action 'permit' set policy route-map foo rule 10 match protocol 'bgp'
2023-04-29static: T5161: add BFD monitoring for static routesfett0