summaryrefslogtreecommitdiff
path: root/data/templates
AgeCommit message (Collapse)Author
2023-12-25snmp: T5855: migrate "set service lldp snmp enable" to "set service lldp snmp"Christian Breunig
(cherry picked from commit a9201e77110ce0695e2ba879304aef41b7ac9a0c)
2023-12-21T2898: add ndp-proxy serviceChristian Breunig
VyOS CLI command set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static' Will generate the following NDP proxy configuration $ cat /run/ndppd/ndppd.conf # autogenerated by service_ndp-proxy.py # This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route route-ttl 30000 # This sets up a listener, that will listen for any Neighbor Solicitation # messages, and respond to them according to a set of rules proxy eth0 { # Turn on or off the router flag for Neighbor Advertisements router no # Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds) timeout 500 # Control how long a valid or invalid entry remains in the cache (milliseconds) ttl 30000 # This is a rule that the target address is to match against. If no netmask # is provided, /128 is assumed. You may have several rule sections, and the # addresses may or may not overlap. rule 2001:db8::/64 { static } } (cherry picked from commit 4d721a58020971d00ab854c37b68e88359999f9c)
2023-12-21frr: T4020: re-enable watchfrr in config as it is always runningChristian Breunig
(cherry picked from commit 42614633901713e6472b43f95065d215344843b1)
2023-12-20T5798: load-balancing revese-proxy add multiple SSL certificatesViacheslav Hletenko
Add ability to configure multiple SSL certificates for frontend/service set load-balancing reverse-proxy service web mode http set load-balancing reverse-proxy service web port 443 set load-balancing reverse-proxy service web ssl certificate cert1 set load-balancing reverse-proxy service web ssl certificate cert2 (cherry picked from commit fe99c45e05fd5794905145ddca80e6078145c2e8)
2023-12-18T4163: Add BGP Monitoring Protocol BMP featureViacheslav Hletenko
Add BMP feature. BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring data from BGP routers to network management entities https://docs.frrouting.org/en/latest/bmp.html Example: set system frr bmp commit run restart bgp set protocols bgp system-as '65001' set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast set protocols bgp neighbor 192.0.2.11 remote-as '65001' set protocols bgp bmp mirror-buffer-limit '256000000' set protocols bgp bmp target foo address '127.0.0.1' set protocols bgp bmp target foo port '5000' set protocols bgp bmp target foo min-retry '1000' set protocols bgp bmp target foo max-retry '2000' set protocols bgp bmp target foo mirror set protocols bgp bmp target foo monitor ipv4-unicast post-policy set protocols bgp bmp target foo monitor ipv4-unicast pre-policy set protocols bgp bmp target foo monitor ipv6-unicast post-policy set protocols bgp bmp target foo monitor ipv6-unicast pre-policy (cherry picked from commit 5523fccf4f7d05444c36c568128e94cd7b08c34f)
2023-12-16image: T4516: ensure compatibility with legacy RAID 1 installsJohn Estabrook
(cherry picked from commit bd701768796d6ebb03ca943faf96d1dbea030edd)
2023-12-16image: T4516: use copy of pw_reset script for install, link for compatJohn Estabrook
Note that this was updated for the fix in T5739. (cherry picked from commit 424c9b19fd54598081e965c3364b082c5ef984de)
2023-12-16image: T4516: support for interoperability of legacy/new image toolsJohn Estabrook
This commit allows management of system images with either new or legacy tools: 'add/delete/rename system image' and 'set default' are translated appropriately on booting between images with the old and new tools. Consequently, the warning of the initial commit of T4516 is dropped. (cherry picked from commit 96b65e90fbfa1fe63d97929ac86fc910abb0caa9)
2023-12-16image: T4516: Added system image toolszsdc
This commit adds the whole set of system image tools written from the scratch in Python that allows performing all the operations on images: * check information * perform installation and deletion * versions management Also, it contains a new service that will update the GRUB menu and keep tracking its version in the future. WARNING: The commit contains non-reversible changes. Because of boot menu changes, it will not be possible to manage images from older VyOS versions after an update. (cherry picked from commit 8f94262e8fa2477700c50303ea6e2c6ddad72adb)
2023-12-16ocserv: T5796: add smoketest for new "http-security-headers" featureChristian Breunig
(cherry picked from commit 1c82e661e04e0979e09e487a58a801ffa9f438e8)
2023-12-16ocserv: T5796: add CLI knob "http-security-headers"fett0
OCserv manual recommended HTTP headers tobe included in the configuration. (cherry picked from commit ad65d37ddf92ec8416c84707d7d41e63346b550c) (cherry picked from commit 24f449cc099703df95646c719e9d3f308ed1a3f0)
2023-12-15T5775: Fix collisions and adjust for 1.4Bjarke Istrup Pedersen
2023-12-15T5775: firewall: re-add state-policy to firewall. These commands are now ↵Nicolas Fort
included in <set firewall global-options state-policy> node.
2023-12-15frr: T4020: add option to define number of open file descriptorsChristian Breunig
This allows the operator to control the number of open file descriptors each daemon is allowed to start with. The current assumed value on most operating systems is 1024. If the operator plans to run bgp with several thousands of peers then this is where we would modify FRR to allow this to happen. set system frr descriptors <n> (cherry picked from commit 892c28ccf634173d4c4952c248cb03974c560793)
2023-12-13srv6: T591: initial implementation to support locator definitionChristian Breunig
VyOS CLI set protocols segment-routing srv6 locator bar prefix '2001:b::/64' set protocols segment-routing srv6 locator foo behavior-usid set protocols segment-routing srv6 locator foo prefix '2001:a::/64' Will generate in FRR segment-routing srv6 locators locator bar prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16 exit ! locator foo prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16 behavior usid exit ! exit ! exit ! exit (cherry picked from commit ca301cdd4746187f96ff84e411fda6a84e33f237)
2023-12-13bgp: T591: add SRv6 support from FRRChristian Breunig
set protocols bgp sid vpn per-vrf export '99' set protocols bgp srv6 locator 'foo' set protocols bgp system-as '100' Will generate in FRR config router bgp 100 no bgp ebgp-requires-policy no bgp default ipv4-unicast no bgp network import-check ! segment-routing srv6 locator foo exit sid vpn per-vrf export 99 exit (cherry picked from commit af46fe54e56cf85d13b62ee771bec3d80f225ac5)
2023-12-09git: T5803: Adjust git configuration for baseline defaultsIndrajit Raychaudhuri
Apply baseline defaults for `.gitattributes` and `.vscode/settings.json` for improved developer experience. The `.gitattrbutes` settings are based on: Git documentation (https://git-scm.com/docs/gitattributes#_effects) GitHub documentation (https://docs.github.com/en/get-started/getting-started-with-git/configuring-git-to-handle-line-endings) Community templates (https://github.com/gitattributes/gitattributes) Since editor-agnostic line-ending specific settings are applied to `.gitattributes`, they can be removed from `.vscode/settings.json`. The global VSCode defaults have also been removed to avoid duplication. (cherry picked from commit c30002208d392177cb1ffc1a5c714f7ad6d573b6)
2023-12-08T5805: telegraf: re-add network metricsVladimir F
2023-12-05ddclient: T5791: Update dynamic dns configuration pathIndrajit Raychaudhuri
Modify the configuration path to be consistent with the usual dialects of VyoS configuration (wireguard, dns, firewall, etc.) This would also shorten the configuration path and have a unified treatment for RFC2136-based updates and other 'web-service' based updates. While at it, add support for per-service web-options. This would allow for probing different external URLs on a per-service basis.
2023-12-02 T5796:add/fixed OCSERV HTTP security headersfett0
(cherry picked from commit db51546edd653d3637cb26d6957ce5222d44d395)
2023-12-01Merge pull request #2555 from indrajitr/sagitta-ddclient-backportsChristian Breunig
ddclient: T5573,T5574,T5612,T5708: Backport ddclient related changes
2023-12-01mdns: T5723: Always reload systemd daemon before applying changesIndrajit Raychaudhuri
Additionally, templatize system service override and move it to the runtime path. (cherry picked from commit eb906739047187c322b6ce9efe7c9479bed9a024)
2023-11-30ddclient: T5708: Ensure password is always wrapped in quotesIndrajit Raychaudhuri
Migration to 3.11.1 follow-up: This should make `ddclient.conf` parsing more resilient to edge cases (particularly when `password` isn't the last option right before the host parameter). ddclient config parser applies special treatment to the password field and would unwrap the quotes automatically. Also, switch from now deprecated `use=no` to `use=disabled`.
2023-11-30ddclient: T5708: Migrate `timeout` to `interval`Indrajit Raychaudhuri
Time interval in seconds to wait between DNS updates would be a bit more intuitive as `interval` than `timeout`.
2023-11-30ddclient: T5574: Support per-service cache management for servicesIndrajit Raychaudhuri
Add support for per-service cache management for ddclient providers via `wait-time` and `expiry-time` options. This allows for finer-grained control over how often a service is updated and how long the hostname will be cached before being marked expired in ddclient's cache. More specifically, `wait-time` controls how often ddclient will attempt to check for a change in the hostname's IP address, and `expiry-time` controls how often ddclient to a forced update of the hostname's IP address. These options intentionally don't have any default values because they are provider-specific. They get treated similar to the other provider- specific options in that they are only used if defined.
2023-11-30ddclient: T5612: Generate more reliable ddclient configIndrajit Raychaudhuri
Adjust the jinja template to avoid generating incorrect ddclient.conf in some cases. The template is reformatted to guarantee whitespacing and empty line separation.
2023-11-30ddclient: T5612: Enable TTL support for web-service based protocolsIndrajit Raychaudhuri
Enable TTL support for web-service based protocols in addition to RFC2136 based (nsupdate) protocol. Since TTL is not supported by all protocols, and thus cannot have a configuration default, the existing XML snippet `include/dns/time-to-live.xml.i` does not have common `<defaultValue>300</defaultValue>` anymore and is instead added explicitly whenever necessary.
2023-11-30ddclient: T5612: Fix VRF support for ddclient serviceIndrajit Raychaudhuri
Fix VRF support interface definition and configuration mode for ddclient to actually capture the VRF name and pass it to the template.
2023-11-30ddclient: T5573: Update config generation aligning with caching fixesIndrajit Raychaudhuri
Now that the caching fixes are in place, we can update the config to remove legacy treatment of ipv4 related properties.
2023-11-22Merge pull request #2521 from vyos/mergify/bp/sagitta/pr-2516Daniil Baturin
T5767: HTTPS API add reboot and poweroff endpoints (backport #2516)
2023-11-22Merge pull request #2517 from nicolas-fort/T5419-FT-SagittaDaniil Baturin
T5419: firewall: backport firewall flowtable to Sagitta.
2023-11-22Merge pull request #2510 from vyos/mergify/bp/sagitta/pr-2506Daniil Baturin
dhcp-client: T5760: add CLI option to pass user-class parameter (backport #2506)
2023-11-21T5767: HTTPS API add reboot and poweroff endpointsViacheslav Hletenko
Add ability to reboot and poweroff the system via API curl -k --location --request POST 'https://vyos/reboot' \ --form data='{"op": "reboot", "path": ["now"]}' \ --form key='apikey' curl -k --location --request POST 'https://vyos/poweroff' \ --form data='{"op": "poweroff", "path": ["now"]}' \ --form key='apikey' (cherry picked from commit 36f3c329c2df0e78f2f5da933d9729a872fb2a11)
2023-11-21T5419: firewall: backport firewall flowtable to Sagitta.Nicolas Fort
2023-11-20http: T5762: api: make API socket backend communication the one and only defaultChristian Breunig
Why: Smoketests fail as they can not establish IPv6 connection to uvicorn backend server. https://github.com/vyos/vyos-1x/pull/2481 added a bunch of new smoketests. While debugging those failing, it was uncovered, that uvicorn only listens on IPv4 connections vyos@vyos# netstat -tulnp | grep 8080 (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN - As the CLI already has an option to move the API communication from an IP to a UNIX domain socket, the best idea is to make this the default way of communication, as we never directly talk to the API server but rather use the NGINX reverse proxy. (cherry picked from commit f5e43b1361fb59a9c260739bdb28729d5119507c)
2023-11-20dhcp-client: T5760: add CLI option to pass user-class parameterChristian Breunig
Example: set interfaces ethernet eth0 dhcp-options user-class VyOS or set interfaces ethernet eth0 dhcp-options user-class 56:79:4f:53 (cherry picked from commit 260645d0c6ff078cc89601f3a586195902f9c18e)
2023-11-20dhcp-client: T5760: add constraints for dhclient string optionsChristian Breunig
The string data type specifies either an NVT ASCII string enclosed in double quotes, or a series of octets specified in hexadecimal, separated by colons. For example: set interfaces ethernet eth0 dhcp-options client-id CLIENT-FOO or set interfaces ethernet eth0 dhcp-options client-id 43:4c:49:45:54:2d:46:4f:4f As of now there was no input validation performed. (cherry picked from commit bed1cd01904ef89b5d31bd47de0f230214900f16)
2023-11-20Merge pull request #2509 from c-po/pim6-frr-daemon-fixupDaniil Baturin
frr: T5733: enable pim6 daemon
2023-11-20frr: T5733: enable pim6 daemonChristian Breunig
2023-11-19Merge pull request #2498 from nicolas-fort/T4072-sagittaChristian Breunig
T4072: firewall: backport bridge firewall to sagitta
2023-11-16T4072: firewall: backport bridge firewall to sagittaNicolas Fort
2023-11-15pim6: T5733: add missing FRR PIM6 related featuresChristian Breunig
(cherry picked from commit 403d2ffd6e46cb082b1d16ddf515e1784bee968c) # Conflicts: # data/templates/frr/pim6d.frr.j2 # interface-definitions/protocols-pim6.xml.in # smoketest/scripts/cli/test_protocols_pim6.py # src/conf_mode/protocols_pim6.py
2023-11-15igmp: T5736: support per interface "disable" CLI nodeChristian Breunig
(cherry picked from commit 6ce2ecb10884a4b79a7643e22596a2d03d805a91)
2023-11-15pim: T5733: fix CLI level of global PIM commandsChristian Breunig
(cherry picked from commit dd13213ae94f071bc30cc17f5fabef02fbf95939)
2023-11-15igmp: T5736: migrate "protocols igmp" to "protocols pim"Christian Breunig
IGMP and PIM are two different but related things. FRR has both combined in pimd. As we use get_config_dict() and FRR reload it is better to have both centrally stored under the same CLI node (as FRR does, too) to just "fire and forget" the commit to the daemon. "set protocols igmp interface eth1" -> "set protocols pim interface eth1 igmp" (cherry picked from commit bc83fb097719f5c4c803808572f690fbc367b9e5)
2023-11-15pim: T5733: rename watermark-warn -> watermark-warningChristian Breunig
(cherry picked from commit 45ea9ed72ee11809f69619a40ae243df562de39f)
2023-11-15pim: T5733: add missing FRR PIM related featuresChristian Breunig
Migrate CLI configuration retrival to common get_config_dict(). In addition add new functionality to VyOS that is PIM related and already available in FRR. (cherry picked from commit 9abc02edcc237760f1f8aa1b3f08d7f4d18f866c) # Conflicts: # python/vyos/frr.py # src/op_mode/restart_frr.py
2023-11-14T5728: OpenVPN server replace first_host_address to vpn_gatewayViacheslav Hletenko
Some OpenVPN clients (OpenVPN3) do not understand address of gateway for the pushed networks. It leads that pushed routes are not installed at all. Replace `subnet | first_host_address` to the `vpn_gateway` to fix it (cherry picked from commit 480711c329a38b773bb0b8f64f0e50dfc4ea4437)
2023-11-09T1797: Delete VPP from vyos-1x as it is implemented in addonViacheslav Hletenko
(cherry picked from commit 59c8d5febb2b1333643372f8956fa8f219d022cb)
2023-11-07T5702: SNMP add interface-mib max-interfaces-number and prefixViacheslav Hletenko
- Allow to configure only required interface prefixes set service snmp mib interface 'eth' set service snmp mib interface 'bond' include_ifmib_iface_prefix eth bond Sets the interface name prefixes to include in the IF-MIB data collection. For servers with a large number of interfaces (ppp, dummy, bridge, etc) the IF-MIB processing will take a large chunk of CPU for ioctl calls. A set of space separated interface name prefixes will reduce the CPU load for IF-MIB processing. For example, configuring "include_ifmib_iface_prefix eth dummy lo" will include only interfaces with these prefixes and ignore all others for IF-MIB processing. - Allow to configure maximum interface number set service snmp mib interface-max '100' ifmib_max_num_ifaces NUM Sets the maximum number of interfaces included in IF-MIB data collection. For servers with a large number of interfaces (ppp, dummy, bridge, etc) the IF-MIB processing will take a large chunk of CPU for ioctl calls (on Linux). Setting a reasonable maximum for the CPU used will reduce the CPU load for IF-MIB processing. For example, configuring "ifmib_max_num_ifaces 500" will include only the first 500 interfaces based on ifindex and ignore all others for IF-MIB processing. (cherry picked from commit 30a05ee1d447c6f92627162a506225f833a80f8c)
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 01:04:25 +0000