summaryrefslogtreecommitdiff
path: root/data/templates
AgeCommit message (Collapse)Author
2020-05-29ssh: T2230: remove duplicated HostKey lineChristian Poessinger
2020-05-26pppoe: T2502: configure IPv6 default routes if requiredChristian Poessinger
2020-05-26pppoe: T2502: always delete default route once interface goes downChristian Poessinger
2020-05-26pppoe: T2219: fix proper RA autoconf file nameChristian Poessinger
Commit 8dcf042a7f5 ("pppoe: T2219: move adding of default route to ip-(up|down) script") wrongly tried to open a file called autoconfigure which infact should be autoconf
2020-05-26pppoe: T2502: fix Jinja2 template indentionChristian Poessinger
2020-05-26dhcpv6-pd: T2506: add option to request specific prefix lengthChristian Poessinger
Some ISPs (e.g. Comcast) only delegate a /64 by default. You have to explicitly "ask" for a bigger (e.g. /60) prefix. This commit adds a CLI node to request a specific prefix length in the range 32 - 64. dhcpv6-options { prefix-delegation { length 60 } }
2020-05-26dhcpv6-pd: pppoe: T2506: restructure CLIChristian Poessinger
Rename the CLI nodes for prefix delegation from "dhcpv6-options delegate <interface>" to "dhcpv6-options prefix-delegation interface <interface>". The change is required to add the possibility to request for specific prefix sized via the CLI. That option was not possible with the old configuration tree.
2020-05-26pppoe: T2502: "default-route none" option had no effectChristian Poessinger
2020-05-24fromdos: fix wrong line encodingChristian Poessinger
2020-05-22macsec: T2491: add replay window protectionChristian Poessinger
2020-05-22macsec: T2023: only render mka in template if encrypt enabledChristian Poessinger
2020-05-21pppoe: T2488: remove logfile generationChristian Poessinger
2020-05-21macsec: T2023: support MACsec Key Agreement protocol actor priorityChristian Poessinger
2020-05-21macsec: T2023: rename "security key" node to "security mka"Christian Poessinger
MACsec always talks about MKA (MACsec Key Agreement protocol) thus the node should reflect that.
2020-05-21macsec: T2023: use wpa_supplicant for key managementChristian Poessinger
2020-05-19dhcpv6-server: T815: support delegating IPv6 prefixesChristian Poessinger
2020-05-17pppoe: dhcpv6-pd: T421: start/stop delegation with interface statusChristian Poessinger
2020-05-17pppoe: dhcpv6-pd: T421: initial supportChristian Poessinger
The following configuration will assign a /64 prefix out of a /56 delegation to eth0. The IPv6 address assigned to eth0 will be <prefix>::ffff/64. If you do not know the prefix size delegated to you, start with sla-len 0. pppoe pppoe0 { authentication { password vyos user vyos } description sadfas dhcpv6-options { delegate eth0 { interface-id 65535 sla-id 0 sla-len 8 } } ipv6 { address { autoconf } enable } source-interface eth1 } vyos@vyos:~$ show interfaces Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down Interface IP Address S/L Description --------- ---------- --- ----------- eth0 2001:db8:8003:400::ffff/64 u/u
2020-05-17dhcpv6-pd: T421: migrate from ISC dhclient to wide-dhcpv6-clientChristian Poessinger
ISC does not support running the client on PPP(oE) interfaces which makes it unusable for DHCPv6 Prefix Delegation tasks. Internet Systems Consortium DHCP Client 4.4.1 Copyright 2004-2018 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Unsupported device type 512 for "pppoe0"
2020-05-17pppoe-server: T2471: add SLAAC supportChristian Poessinger
... by setting AdvAutonomousFlag=1 when an IPv6 client pool is defined.
2020-05-17frr: combine all templates in frr directoryChristian Poessinger
2020-05-16nat: T2198: use Jinja2 macro for common ruleset for SNAT and DNATChristian Poessinger
By using a Jinja2 macro the same template code can be used to create both source and destination NAT rules with only minor changes introduced by e.g. the used chain (POSTROUTING vs PREROUTING). Used the following configuration for testing on two systems with VyOS 1.2 and the old implementation vs the new one here. set nat destination rule 15 description 'foo-10' set nat destination rule 15 destination address '1.1.1.1' set nat destination rule 15 inbound-interface 'eth0.202' set nat destination rule 15 protocol 'tcp_udp' set nat destination rule 15 translation address '192.0.2.10' set nat destination rule 15 translation port '3389' set nat destination rule 20 description 'foo-20' set nat destination rule 20 destination address '2.2.2.2' set nat destination rule 20 destination port '22' set nat destination rule 20 inbound-interface 'eth0.201' set nat destination rule 20 protocol 'tcp' set nat destination rule 20 translation address '192.0.2.10' set nat source rule 100 outbound-interface 'eth0.202' set nat source rule 100 protocol 'all' set nat source rule 100 source address '192.0.2.0/26' set nat source rule 100 translation address 'masquerade' set nat source rule 110 outbound-interface 'eth0.202' set nat source rule 110 protocol 'tcp' set nat source rule 110 source address '192.0.2.0/26' set nat source rule 110 source port '5556' set nat source rule 110 translation address 'masquerade' set nat source rule 120 outbound-interface 'eth0.202' set nat source rule 120 protocol 'tcp_udp' set nat source rule 120 source address '192.0.3.0/26' set nat source rule 120 translation address '2.2.2.2'
2020-05-16nat: T2198: restructure DNAT template part for less duplicated codeChristian Poessinger
Build up only one output rule string by appending the configuration part by part.
2020-05-16nat: T2198: add support for SNAT based on source addressesChristian Poessinger
CLI commands used for ruleset generation: set nat source rule 100 outbound-interface 'eth0.202' set nat source rule 100 protocol 'all' set nat source rule 100 source address '192.0.2.0/26' set nat source rule 100 translation address 'masquerade' set nat source rule 110 outbound-interface 'eth0.202' set nat source rule 110 protocol 'tcp' set nat source rule 110 source address '192.0.2.0/26' set nat source rule 110 source port '5556' set nat source rule 110 translation address 'masquerade'
2020-05-16nat: T2198: sync generated SNAT rules with VyOS 1.2Christian Poessinger
The generated NAT rules in VyOS 1.2 are compared to the generated nftables ruleset in VyOS 1.3 this was done by converting the 1.2 iptables ruleset to nftables and then do the diff. To convert from iptables to nftables use the following command: $ iptables-save -t nat > /tmp/tmp.iptables $ iptables-restore-translate -f /tmp/tmp.iptables The following CLI options have been used for testing: set nat source rule 10 description 'foo-10' set nat source rule 10 destination address '1.1.1.1' set nat source rule 10 destination port '1111' set nat source rule 10 exclude set nat source rule 10 log 'enable' set nat source rule 10 outbound-interface 'eth0.202' set nat source rule 10 protocol 'tcp_udp' set nat source rule 10 translation address '192.0.2.10' set nat source rule 15 description 'foo-10' set nat source rule 15 destination address '1.1.1.1' set nat source rule 15 exclude set nat source rule 15 log 'enable' set nat source rule 15 outbound-interface 'eth0.202' set nat source rule 15 protocol 'tcp_udp' set nat source rule 15 translation address '192.0.2.10' set nat source rule 20 description 'foo-20' set nat source rule 20 destination address '2.2.2.2' set nat source rule 20 log 'enable' set nat source rule 20 outbound-interface 'eth0.201' set nat source rule 20 protocol 'tcp' set nat source rule 20 translation address '192.0.2.10' set nat source rule 100 outbound-interface 'eth0.202' set nat source rule 100 protocol 'all' set nat source rule 100 source address '192.0.2.0/26' set nat source rule 100 translation address 'masquerade'
2020-05-16nat: T2198: sync generated DNAT rules with VyOS 1.2Christian Poessinger
The generated NAT rules in VyOS 1.2 are compared to the generated nftables ruleset in VyOS 1.3 this was done by converting the 1.2 iptables ruleset to nftables and then do the diff. To convert from iptables to nftables use the following command: $ iptables-save -t nat > /tmp/tmp.iptables $ iptables-restore-translate -f /tmp/tmp.iptables The following CLI options have been used for testing: set nat destination rule 10 description 'foo-10' set nat destination rule 10 destination address '1.1.1.1' set nat destination rule 10 destination port '1111' set nat destination rule 10 exclude set nat destination rule 10 inbound-interface 'eth0.202' set nat destination rule 10 log set nat destination rule 10 protocol 'tcp_udp' set nat destination rule 10 translation address '192.0.2.10' set nat destination rule 15 description 'foo-10' set nat destination rule 15 destination address '1.1.1.1' set nat destination rule 15 exclude set nat destination rule 15 inbound-interface 'eth0.202' set nat destination rule 15 log set nat destination rule 15 protocol 'tcp_udp' set nat destination rule 15 translation address '192.0.2.10' set nat destination rule 20 description 'foo-20' set nat destination rule 20 destination address '2.2.2.2' set nat destination rule 20 inbound-interface 'eth0.201' set nat destination rule 20 log set nat destination rule 20 protocol 'tcp' set nat destination rule 20 translation address '192.0.2.10'
2020-05-16nat: T2198: do not run DNAT rule if rule is disabledChristian Poessinger
2020-05-16nat: T2198: restructure DNAT templateChristian Poessinger
Make the entire template more maintainable
2020-05-16nat: T2198: make use of jmespath when walking nftables JSON outputChristian Poessinger
2020-05-16nat: T2198: implement deletion of NAT subsystemChristian Poessinger
2020-05-16nat: T2198: automatically determine handler numbersChristian Poessinger
When instantiating NAT it is required to isntall some nftable jump targets. The targets need to be added after a specific other target thus we need to dynamically query the handler number. This is done by get_handler() which could be moved to vyos.util at a later point in time so it can be reused for a firewall rewrite.
2020-05-16nat: T2198: move from iptables to nftablesChristian Poessinger
2020-05-16nat: T2198: migrate to common template for source/destination NATChristian Poessinger
2020-05-16nat: T2198: destination nat template for iptables-restoreChristian Poessinger
2020-05-06sstp: T2392: add IPv6 DNS supportChristian Poessinger
New command added: * set vpn sstp network-settings name-server 2001:db8::1111
2020-05-06sstp: T2392: add initial IPv6 supportChristian Poessinger
New commands added: * set vpn sstp network-settings client-ipv6-pool prefix 2001:db8::/64 mask 112 * set vpn sstp network-settings client-ipv6-pool delegate 2001:db8:100::/48 delegation-prefix 64
2020-05-04openvpn: T2241: remove redundant bridge_member variableJernej Jakob
2020-04-30dhcpv6-server: T2406: move FQDN quoting to Jinja2 templateChristian Poessinger
... no need to reinvent the wheel in our Python code.
2020-04-28dhclient: T2393: remove intermediate _DHCP helper classChristian Poessinger
The intermedite class only held the path to the configuration files - thus its existence was doubtworthy. For better readability and a clean inheritance graph that class has been dropped.
2020-04-28dhclient6: T2393: T2394: migrate from SysVinit to systemdChristian Poessinger
2020-04-28dhclient: T2393: migrate from SysVinit to systemdChristian Poessinger
2020-04-27pppoe-server: T2391: Migrate single-session param to [common] sectionDmitriyEshenko
2020-04-26salt: T2384: migrate config optionsChristian Poessinger
- delete log_file, log_level and user nodes - rename hash_type to hash - rename mine_interval to interval
2020-04-26salt: T2384: always log to syslogChristian Poessinger
2020-04-25login: radius: T2304: add VRF supportChristian Poessinger
This allows the radius client to work when a management VRF is in use.
2020-04-23pppoe-server: T2373: Implement CLI commands for auth protocolsDmitriyEshenko
2020-04-22Merge branch 'pptp-rewrite' of github.com:c-po/vyos-1x into currentChristian Poessinger
* 'pptp-rewrite' of github.com:c-po/vyos-1x: accel-ppp: fix wrong reference in verify() on missing attributes accel-ppp: T2314: bugfix wrong placement of endif in Jinja2 template vpn: pptp: T2351: add support for common radius-additions XML vpn: pptp: T2351: migrate to common radius CLI vpn: pptp: T2351: migrate to common name-server, wins-server nodes accel-ppp: provide common wins-server include definition vpn: pptp: T2351: use first IP from client pool as gateway address vpn: pptp: T2351: align configuration to other accel implementations vpn: pptp: T2351: migrate from SysVinit to systemd vyos.util: migrate all cpu_count() occurances to common get_half_cpus()
2020-04-22accel-ppp: T2314: bugfix wrong placement of endif in Jinja2 templateChristian Poessinger
2020-04-22vpn: pptp: T2351: align configuration to other accel implementationsChristian Poessinger
2020-04-21mroute: T2364: Implement CLI commands for mrouteDmitriyEshenko