| Age | Commit message (Collapse) | Author |
|---|
|
T5801: Rewritten L2TP to get_config_dict
|
|
T5842: Rewritten PPTP to get_config_dict
|
|
Rewritten PPTP to get_config_dict
Fixed 'dynamic-author' commands. These commands did not create
anything in accel-ppp config.
|
|
T5859: Fixed format of pool range in the accel-ppp config
|
|
Fixed format of ipv4 pool range from 'x.x.x.x-x.x.x.y'
to 'x.x.x.x-y'
|
|
One can now do `set policy route foo default-log` which will add log
to the policy route chain.
|
|
|
|
After update KEA to 2.4.x in the bf04cd8fea44d375fb7d93d75a1f31c220730c88
there is a file that expects ConditionFileNotEmpty=/etc/kea/kea-api-password
It cause the unit `kea-ctrl-agent.service` cannot start
systemd[1]: kea-ctrl-agent.service - Kea Control Agent was skipped because of an unmet condition check (ConditionFileNotEmpty=/etc/kea/kea-api-password)
Override systemd kea-ctrl-agent.service do not check this file
|
|
T2898: add ndp-proxy service
|
|
|
|
VyOS CLI command
set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static'
Will generate the following NDP proxy configuration
$ cat /run/ndppd/ndppd.conf
# autogenerated by service_ndp-proxy.py
# This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route
route-ttl 30000
# This sets up a listener, that will listen for any Neighbor Solicitation
# messages, and respond to them according to a set of rules
proxy eth0 {
# Turn on or off the router flag for Neighbor Advertisements
router no
# Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds)
timeout 500
# Control how long a valid or invalid entry remains in the cache (milliseconds)
ttl 30000
# This is a rule that the target address is to match against. If no netmask
# is provided, /128 is assumed. You may have several rule sections, and the
# addresses may or may not overlap.
rule 2001:db8::/64 {
static
}
}
|
|
Rewritten L2TP to get_config_dict
Rewritten L2TP xml to accel-ppp patterns
Migrated 'idle' to 'ppp-options.lcp-echo-timeout'
Migrated 'authentication.mppe' to 'ppp-options.mppe'
Migrated 'authentication.radius.dae-server' to
'authentication.radius.dynamic-author'
Migrated 'authentication.require' to 'authentication.protocol'
Added 'authentication.radius.acct-interim-jitter'
Added 'authentication.radius.preallocate-vif'
Added 'authentication.radius.server.<IP>.acct-port'
Added 'ppp-options.ipv4'
Added smoke-tests
Fixed 'preallocate-vif' in SSTP
|
|
|
|
OCserv manual recommended HTTP headers tobe included in the configuration.
(cherry picked from commit ad65d37ddf92ec8416c84707d7d41e63346b550c)
|
|
frr: T4020: add option to define number of open file descriptors
|
|
This allows the operator to control the number of open file descriptors each
daemon is allowed to start with. The current assumed value on most operating
systems is 1024.
If the operator plans to run bgp with several thousands of peers then this is
where we would modify FRR to allow this to happen.
set system frr descriptors <n>
|
|
T4163: Add BGP Monitoring Protocol BMP feature
|
|
T5798: load-balancing revese-proxy add multiple SSL certificates
|
|
Add BMP feature.
BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring
data from BGP routers to network management entities
https://docs.frrouting.org/en/latest/bmp.html
Example:
set system frr bmp
commit
run restart bgp
set protocols bgp system-as '65001'
set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast
set protocols bgp neighbor 192.0.2.11 remote-as '65001'
set protocols bgp bmp mirror-buffer-limit '256000000'
set protocols bgp bmp target foo address '127.0.0.1'
set protocols bgp bmp target foo port '5000'
set protocols bgp bmp target foo min-retry '1000'
set protocols bgp bmp target foo max-retry '2000'
set protocols bgp bmp target foo mirror
set protocols bgp bmp target foo monitor ipv4-unicast post-policy
set protocols bgp bmp target foo monitor ipv4-unicast pre-policy
set protocols bgp bmp target foo monitor ipv6-unicast post-policy
set protocols bgp bmp target foo monitor ipv6-unicast pre-policy
|
|
VyOS CLI
set protocols segment-routing srv6 locator bar prefix '2001:b::/64'
set protocols segment-routing srv6 locator foo behavior-usid
set protocols segment-routing srv6 locator foo prefix '2001:a::/64'
Will generate in FRR
segment-routing
srv6
locators
locator bar
prefix 2001:b::/64 block-len 40 node-len 24 func-bits 16
exit
!
locator foo
prefix 2001:a::/64 block-len 40 node-len 24 func-bits 16
behavior usid
exit
!
exit
!
exit
!
exit
|
|
set protocols bgp sid vpn per-vrf export '99'
set protocols bgp srv6 locator 'foo'
set protocols bgp system-as '100'
Will generate in FRR config
router bgp 100
no bgp ebgp-requires-policy
no bgp default ipv4-unicast
no bgp network import-check
!
segment-routing srv6
locator foo
exit
sid vpn per-vrf export 99
exit
|
|
dhcp: T3316: Migrate dhcp/dhcpv6 server to Kea
|
|
Apply baseline defaults for `.gitattributes` and `.vscode/settings.json`
for improved developer experience.
The `.gitattrbutes` settings are based on:
Git documentation (https://git-scm.com/docs/gitattributes#_effects)
GitHub documentation (https://docs.github.com/en/get-started/getting-started-with-git/configuring-git-to-handle-line-endings)
Community templates (https://github.com/gitattributes/gitattributes)
Since editor-agnostic line-ending specific settings are applied to
`.gitattributes`, they can be removed from `.vscode/settings.json`.
The global VSCode defaults have also been removed to avoid duplication.
|
|
(cherry picked from commit 383c40c547c7f4dc408b98306119bb3740bc3f7c)
|
|
Add ability to configure multiple SSL certificates for
frontend/service
set load-balancing reverse-proxy service web mode http
set load-balancing reverse-proxy service web port 443
set load-balancing reverse-proxy service web ssl certificate cert1
set load-balancing reverse-proxy service web ssl certificate cert2
|
|
|
|
T5775: firewall: re-add state-policy to firewall. These commands are …
|
|
T5779: conntrack: Apply fixes to <set system conntrack timeout custom>
|
|
Remove what was not working on 1.3, migrate what was working to new syntax and extend feature for ipv6.
|
|
accel-ppp: T5688: Standardized pool configuration in accel-ppp
|
|
Standardized pool configuration for all accel-ppp services.
1. Only named pools are used now.
2. Allows all services to use range in x.x.x.x/mask
and x.x.x.x-x.x.x.y format
3. next-pool can be used in all services
2. Allows to use in ipoe gw-ip-address without pool configuration
which allows to use Fraimed-IP-Address attribute by radius.
3. Default pool name should be explicidly configured
with default-pool.
4. In ipoe netmask and range subnet can be different.
|
|
|
|
Modify the configuration path to be consistent with the usual dialects
of VyoS configuration (wireguard, dns, firewall, etc.)
This would also shorten the configuration path and have a unified
treatment for RFC2136-based updates and other 'web-service' based updates.
While at it, add support for per-service web-options. This would allow
for probing different external URLs on a per-service basis.
|
|
|
|
included in <set firewall global-options state-policy> node.
|
|
T5637: firewall: extend rule for default-action to firewall bridge
|
|
to be able to catch logs using separte rule for default-action
|
|
Add ability to reboot and poweroff the system via API
curl -k --location --request POST 'https://vyos/reboot' \
--form data='{"op": "reboot", "path": ["now"]}' \
--form key='apikey'
curl -k --location --request POST 'https://vyos/poweroff' \
--form data='{"op": "poweroff", "path": ["now"]}' \
--form key='apikey'
|
|
http: T5762: api: make API socket backend communication the one and only default
|
|
Why: Smoketests fail as they can not establish IPv6 connection to uvicorn
backend server.
https://github.com/vyos/vyos-1x/pull/2481 added a bunch of new smoketests.
While debugging those failing, it was uncovered, that uvicorn only listens on
IPv4 connections
vyos@vyos# netstat -tulnp | grep 8080
(Not all processes could be identified, non-owned process info
will not be shown, you would have to be root to see it all.)
tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN -
As the CLI already has an option to move the API communication from an IP to a
UNIX domain socket, the best idea is to make this the default way of
communication, as we never directly talk to the API server but rather use the
NGINX reverse proxy.
|
|
Example:
set interfaces ethernet eth0 dhcp-options user-class VyOS
or
set interfaces ethernet eth0 dhcp-options user-class 56:79:4f:53
|
|
The string data type specifies either an NVT ASCII string enclosed in double
quotes, or a series of octets specified in hexadecimal, separated by colons.
For example:
set interfaces ethernet eth0 dhcp-options client-id CLIENT-FOO
or
set interfaces ethernet eth0 dhcp-options client-id 43:4c:49:45:54:2d:46:4f:4f
As of now there was no input validation performed.
|
|
|
|
Note that this was updated for the fix in T5739.
|
|
This commit allows management of system images with either new or legacy
tools: 'add/delete/rename system image' and 'set default' are translated
appropriately on booting between images with the old and new tools.
Consequently, the warning of the initial commit of T4516 is dropped.
|
|
This commit adds the whole set of system image tools written from the scratch in
Python that allows performing all the operations on images:
* check information
* perform installation and deletion
* versions management
Also, it contains a new service that will update the GRUB menu and keep tracking
its version in the future.
WARNING: The commit contains non-reversible changes. Because of boot menu
changes, it will not be possible to manage images from older VyOS versions after
an update.
|
|
pim(6): T5733: add missing FRR related features
|
|
|
|
|
|
|
