summaryrefslogtreecommitdiff
path: root/data
AgeCommit message (Collapse)Author
2023-03-21T5099: IPoE-server add option next-pool for named ip poolsViacheslav Hletenko
In cases with multiple named IP pools, it is required the option 'next' to be sure that if IP addresses ended in one pool, then they would begin to be allocated from the next named pool. For accel-ppp it requires specific order as pool must be defined before we can use it with the 'next-option' set service ipoe-server client-ip-pool name first-pool subnet '192.0.2.0/25' set service ipoe-server client-ip-pool name first-pool next-pool 'second-pool' set service ipoe-server client-ip-pool name second-pool subnet '203.0.113.0/25' [ip-pool] 203.0.113.0/25,name=second-pool 192.0.2.0/25,name=first-pool,next=second-pool
2023-03-17T5086: Add sFlow drop-monitor-limit optionViacheslav Hletenko
hsflowd will export the headers of dropped packets (along with the name of the function in the Linux kernel where that skb was dropped) as part of the standard sFlow feed. This measurement complements the sFlow packet sampling and counter-telemetry well because it provides visibility into the traffic that is not flowing. Very helpful for troubleshooting. The limit (a rate limit max of N drops per second sent out in the sFlow datagrams) is the parameter you would set in the CLI. set system sflow drop-monitor-limit 50
2023-03-16Merge pull request #1893 from sever-sever/T5092Christian Breunig
T5092: IPoE-server named pool must not rely on auth type
2023-03-16T5092: IPoE-server named pool must not rely on auth typeViacheslav Hletenko
Named pools for ipoe-server must not rely on autentication type It is a separate global option for [ipoe] and [ip-pool] sections
2023-03-16T5086: Add sFlow feature based on hsflowdViacheslav Hletenko
Add sFlow feature based on hsflowd According to user reviews, it works more stable and more productive than pmacct I haven't deleted 'pmacct' 'system flow-accounting sflow' yet It could be migrated or deprecated later set system sflow agent-address '192.0.2.14' set system sflow interface 'eth0' set system sflow interface 'eth1' set system sflow polling '30' set system sflow sampling-rate '100' set system sflow server 192.0.2.1 port '6343' set system sflow server 192.0.2.11 port '6343'
2023-03-14T5085: Fix ipv6 route-map for ospfv3Viacheslav Hletenko
Add template to generate zebra "ipv6 protocol ospf6 route-map xxx"
2023-03-11container: T5003: add dependency on fuse-overlayfsChristian Breunig
Fix podman error about invalid storage: [graphdriver] prior storage driver overlay failed: 'overlay' is not supported over overlayfs, a mount_program is required: backing file system is unsupported for this graph driver" Error: 'overlay' is not supported over overlayfs, a mount_program is required: backing file system is unsupported for this graph driver.
2023-03-10container: T4959: add registry authentication optionChristian Breunig
Container registry CLI node changed from leafNode to tagNode with the same defaults. In addition we can now configure an authentication option per registry.
2023-03-09Merge pull request #1881 from sarthurdev/qos_fixChristian Breunig
qos: T5018: Fix issues between QoS and interface mirror/redirect
2023-03-09qos: T5018: Use configdep to fix interface mirror/redirect issuesarthurdev
This will check if mirror/redirect is present on a QoS interface and use `vyos.configdep` module to update the interface again after QoS is applied.
2023-03-09T5073: IPoE-server fix parse empty range optionViacheslav Hletenko
If the 'client-subnet' is not used we must exclude it from the ipoe.config.j2 template. Otherwise we get wrong empty parameter ',range=,'
2023-03-07T5057: Fix IPoE regex Jinja2 for interfaceViacheslav Hletenko
Fix incorrect regex '\d+' when used vlan ranges For example 'ipoe-server interface eth1 vlan 2000-3000' - replace 'interface=re:eth1\.\d+' => 'interface=re:^eth1\.(200\d|20[1-9]\d|2[1-9]\d{2}|3000)$'
2023-03-06T5056: Fix IPoE server template for vlan-monViacheslav Hletenko
After rewriting IPoE server for config.dict the ipoe.config.j2 template wasn't changed for 'vlan-mon' section Fix it
2023-02-28Merge pull request #1800 from vfreex/feature-babelChristian Breunig
T4977: Add Babel routing protocol support
2023-02-24Merge pull request #1851 from zdc/T4943-sagittaChristian Breunig
login: T4943: Fixed 2FA + RADIUS compatibility
2023-02-24login: T4943: Fixed 2FA + RADIUS compatibilityzsdc
MFA requires KbdInteractiveAuthentication to ask a second factor, and the RADIUS module for PAM does not like it, which makes them incompatible. This commit: * disables KbdInteractiveAuthentication * changes order for PAM modules - make it first, before `pam_unix` or `pam_radius_auth` * enables the `forward_pass` option for `pam_google_authenticator` to accept both password and MFA in a single input As a result, local, RADIUS, and MFA work together. Important change: MFA should be entered together with a password. Before: ``` vyos login: <USERNAME> Password: <PASSWORD> Verification code: <MFA> ``` Now: ``` vyos login: <USERNAME> Password & verification code: <PASSWORD><MFA> ```
2023-02-24Merge pull request #1848 from sever-sever/T5029Christian Breunig
T5029: Change nginx default root directory
2023-02-24T5029: Change nginx default root directoryViacheslav Hletenko
2023-02-24T5029: Fix Regex for nginx to find a better matchViacheslav Hletenko
2023-02-23T5027: Enable legacy provider to support current ciphersViacheslav Hletenko
* We will need to remove insecure ciphers as a long-term solution (BF-CBC, DES...)
2023-02-17T5005: PPPoE server allow any login with option noauthViacheslav Hletenko
Disabling authentication is useful in emergency situations (e.g. RADIUS server is down) or testing purposes. Clients can connect with any login and username. set service pppoe-server authentication mode 'noauth'
2023-02-15Merge pull request #1817 from sarthurdev/bookwormChristian Breunig
debian: T5003: Upgrade base system to Debian 12 "Bookworm"
2023-02-15ipsec: T4593: Migrate and remove legacy `include-ipsec` nodessarthurdev
Not supported with swanctl
2023-02-13debian: T5003: Fix chronyd start errorsarthurdev
Fixes "chronyd: Fatal error : Not superuser" Fixes "ip[6394]: Failed to open mounts file: No such file or directory" when in VRF
2023-02-13debian: T5003: Fixes dynamic DNS for Bookwormsarthurdev
2023-02-12T5001: Replace links to the phabricator siteChristian Breunig
Replace links to the phabricator site from https://phabricator.vyos.net to https://vyos.dev
2023-02-10Merge pull request #1805 from nicolas-fort/T4857-frr-fixChristian Breunig
T4857: snmp: Fix error when not defining client|network under community
2023-02-10snmp: T4857: explicitly define default community networks 0.0.0.0/0 and ::/0Christian Breunig
After the RESTRICTED view was introduced snmpd requires a network to be specified. Before adding the RESTRICTED view snmpd always assumed the default network 0.0.0.0/0. This commit re-adds the build in default networks for IPv4 and IPv6 and exposes it as a proper default to the CLI so the user is informed about it: vyos@vyos# set service snmp community foooo Possible completions: authorization Authorization type (default: ro) + client IP address of SNMP client allowed to contact system + network Subnet of SNMP client(s) allowed to contact system (default: 0.0.0.0/0, ::/0)
2023-02-10interfaces: T4995: rename user -> username CLI node for pppoe, wwan and ↵Christian Breunig
sstp-client
2023-02-10Merge pull request #1808 from sever-sever/T1993Christian Breunig
T1993: PPPoE-server add section shaper and fwmark option
2023-02-09Merge pull request #1793 from aapostoliuk/T4905-sagittaDaniil Baturin
nhrp: T4905: Rewritten nhrp op-mode in new style
2023-02-09Revert "container: T4959: Add container registry authentication config for ↵Christian Breunig
containers" This reverts commit b17251334c57c2f6875c19ad4e6c6127aa9e1811.
2023-02-09Merge pull request #1790 from Zen3515/current-add-container-loginChristian Breunig
container: T4959: Add container registry authentication config for containers
2023-02-09Merge pull request #1803 from sever-sever/T4971Christian Breunig
T4971: PPPoE server add named ip pool and attr Framed-Pool
2023-02-08T1993: PPPoE-server add section shaper and fwmark optionViacheslav Hletenko
Extended PPPoE-server rate-limiter to avoid shaping marked resources Often this feature needs for ISP, which provides access to some IX or its resources. set service pppoe-server shaper fwmark '223'
2023-02-08T4977: Add Babel routing protocol supportYuxiang Zhu
This PR adds basic Babel routing protocol support using the implementation in FRR. Signed-off-by: Yuxiang Zhu <vfreex@gmail.com>
2023-02-08T4857: Fix error when not defining client|network under communityNicolas Fort
2023-02-08T2603: PPPoE-server change default min-mtu value 1280Viacheslav Hletenko
Minimum acceptable MTU. If client will try to negotiate less then specified MTU then it will be NAKed or disconnected if rejects greater MTU. Change 'min-mtu' from 1492 to 1280
2023-02-07T4971: PPPoE server add named ip pool and attr Framed-PoolViacheslav Hletenko
Add a new feature to allow to use named pools Also it can be used with RADIUS attribute 'Framed-Pool' set service pppoe-server client-ip-pool name POOL1 gateway-address '192.0.2.1' set service pppoe-server client-ip-pool name POOL1 subnet '192.0.2.0/24'
2023-02-06ntp: T4980: change chrony deny all logicKyle Mitchell
2023-02-04Merge pull request #1603 from nicolas-fort/T2408Christian Breunig
T2408: dhcp-relay: Add listen-interface and upstream-interface feature
2023-02-04T4817, Corrected formatting.Kyle McClammy
2023-02-04T4817 added support for RFC 9234Kyle McClammy
2023-02-01nhrp: T4905: Rewritten nhrp op-mode in new styleaapostoliuk
1. Formatted output of 'show nhrp' commands to table view 2. Rewritten nhrp op-mode in new style
2023-01-30T4964: Fix template bgpd.frr.j2 for l2vpn vni route-targetsViacheslav Hletenko
Route-target export/import for l2vpn-evpn vni xxx works as leafNode with multiple values We have to use "for" for such values
2023-01-30container: T4959: Add container registry authentication config for containersZen3515
2023-01-30Merge pull request #1761 from sever-sever/T4916-currViacheslav Hletenko
T4916: Rewrite IPsec peer authentication and psk migration
2023-01-28vrrp: T1297: improve gratuitous ARP default value handling and help stringsChristian Breunig
2023-01-28T4958: ocserv: openconnect: refactor RADIUS accounting supportJamie Austin
2023-01-28T4958: ocserv: openconnect: adds support for configuring RADIUS accountingJamie Austin
Adds CLI configuration options to configure RADIUS accounting for OpenConnect VPN sessions. This functionality cannot be used outside of the RADIUS OpenConnect VPN authentication mode