| Age | Commit message (Collapse) | Author |
|---|
|
T5530: isis: Adding loop free alternate feature
|
|
|
|
Set the MRU (Maximum Receive Unit) value to n. PPPd will ask the peer to send
packets of no more than n bytes. The value of n must be between 128 and 16384,
the default was always 1492 to match PPPoE MTU.
A value of 296 works well on very slow links (40 bytes for TCP/IP header + 256
bytes of data). Note that for the IPv6 protocol, the MRU must be at least 1280.
CLI:
set interfaces pppoe pppoe0 mru 1280
|
|
Add support for per-service cache management for ddclient providers
via `wait-time` and `expiry-time` options. This allows for finer-grained
control over how often a service is updated and how long the hostname
will be cached before being marked expired in ddclient's cache.
More specifically, `wait-time` controls how often ddclient will attempt
to check for a change in the hostname's IP address, and `expiry-time`
controls how often ddclient to a forced update of the hostname's IP
address.
These options intentionally don't have any default values because they
are provider-specific. They get treated similar to the other provider-
specific options in that they are only used if defined.
|
|
ddclient: T5612: Miscellaneous improvements and fixes for dynamic DNS
|
|
Fixes `KeyError: 'conntrack_sync'`
Ignore `ConfigError("ConfigError('Interface eth1 requires an IP address!')")` due to calling conntrack-sync too early
|
|
Rename avahi-daemon config file to avahi-daemon.conf.j2 to match the
convention used by other config files.
|
|
This commit adds a new configuration option to the mDNS repeater service
to allow controlling which IP version to use for mDNS repeater.
Additionally, publishing AAAA record over IPv4 and A record over IPv6 is
disabled as suggested.
See:
- https://github.com/lathiat/avahi/issues/117#issuecomment-1651475104
- https://bugzilla.redhat.com/show_bug.cgi?id=669627#c2
|
|
conntrack: T5376: T5598: Restore kernel conntrack helpers
|
|
|
|
|
|
`nf_conntrack_helper` that auto-assigned helpers is removed from the kernel
|
|
Enable TTL support for web-service based protocols in addition to
RFC2136 based (nsupdate) protocol.
Since TTL is not supported by all protocols, and thus cannot have a
configuration default, the existing XML snippet `include/dns/time-to-live.xml.i`
does not have common `<defaultValue>300</defaultValue>` anymore and is
instead added explicitly whenever necessary.
|
|
Adjust the jinja template to avoid generating incorrect ddclient.conf in
some cases. The template is reformatted to guarantee whitespacing and
empty line separation.
|
|
Fix VRF support interface definition and configuration mode for ddclient
to actually capture the VRF name and pass it to the template.
|
|
|
|
|
|
A `backup` server can be defined to take over in the case of all other
backends failing
set load-balancing reverse-proxy backend <tag> server <tag> address '192.0.2.3'
set load-balancing reverse-proxy backend <tag> server <tag> port '8883'
set load-balancing reverse-proxy backend <tag> server <tag> backup
|
|
bgp: T5596: add new features from FRR 9
|
|
isis: T5597: add new features from FRR 9
|
|
A commit that removes `firewall bridge` will delete the table and not re-create it. Therefore any further firewall commit will fail trying to delete the non-existent bridge table. This commit ensures the table is always present (even if empty) to ensure successful commit.
|
|
`set firewall flowtable <name> interface <ifname>`
`set firewall flowtable <name> offload [software|hardware]`
`set firewall [ipv4|ipv6] forward filter rule N action offload`
`set firewall [ipv4|ipv6] forward filter rule N offload-target <name>`
|
|
* Add support for IS-IS advertise-high-metrics
set protocols isis advertise-high-metrics
* Add support for IS-IS advertise-passive-only
set protocols isis advertise-passive-only
|
|
* Add BGP Software Version capability (draft-abraitis-bgp-version-capability)
set protocols bgp neighbor 192.0.2.1 capability software-version
* Add BGP neighbor path-attribute treat-as-withdraw command
set protocols bgp neighbor 192.0.2.1 path-attribute treat-as-withdraw
|
|
conntrack: T5571: Refactor conntrack using vyos.configdep
|
|
ddclient: T5573: Update config generation aligning with caching fixes
|
|
firewall, nat, nat66
|
|
T5586: Disable by default SNMP for Keeplived VRRP service
|
|
T5261: Add AWS load-balancing tunnel handler
|
|
AgentX does not work stable. From time to time we see the system
service crashing/degrading if something is wrong with SNMP from
util net-snmp.
We should disable it by default and enable it only if configured.
set high-availability vrrp snmp
|
|
When rebasing https://github.com/vyos/vyos-1x/pull/2062, some additional
lines are mistakenly included.
https://github.com/vyos/vyos-1x/commit/45cfd569119b66abd2f0dfb954042b57921881bd
has removed the extra `}`, but the `{{ group_tmpl.groups(group, True)
}}` line needs to be removed as well.
|
|
|
|
openvpn: T3214: fix server-ipv6 and nopool handling
|
|
T4502: firewall: Add software flow offload using flowtable
|
|
|
|
Add the ability to use the option all for remove-private-as.
Remove private ASNs in outbound updates.
all - Apply to all AS numbers
set protocols bgp neighbor <tag> address-family ipv4-unicast remove-private-as all
|
|
Now that the caching fixes are in place, we can update the config to
remove legacy treatment of ipv4 related properties.
|
|
T3655: Fix NAT problem with VRF
|
|
Linux netfilter patch https://patchwork.ozlabs.org/project/netfilter-devel/patch/d0f84a97f9c86bec4d537536a26d0150873e640d.1439559328.git.daniel@iogearbox.net/
adds direction support for conntrack zones, which makes it possible to
do NAT with conflicting IP address/port tuples from multiple, isolated tenants on a host.
According to the description of the kernel patch:
> ... overlapping tuples can be made unique with the zone identifier in
original direction, where the NAT engine will then allocate a unique
tuple in the commonly shared default zone for the reply direction.
I did some basic tests in my lab and it worked fine to forward packets
from eth0 to pppoe0.
- eth0 192.168.1.1/24 in VRF red
- pppoe0 dynamic public IP from ISP VRF default
- set vrf name red protocols static route 0.0.0.0/0 interface pppoe0 vrf 'default'
- set protocols static route 192.168.1.0/24 interface eth0 vrf 'red'
`conntrack -L` shows something like:
```
tcp 6 113 ESTABLISHED src=192.168.1.2 dst=1.1.1.1 sport=58946 dport=80 zone-orig=250 packets=6 bytes=391 src=1.1.1.1 dst=<my-public-ip> sport=80 dport=58946 packets=4 bytes=602 [ASSURED] mark=0 helper=tns use=1
```
It would be much appreciated if someone could test this with more
complex VRF setup.
|
|
|
|
T5518: Add basic MLD support
|
|
The following commands will enable nftables flowtable offload on interfaces eth0 eth1:
```
set firewall global-options flow-offload software interface <name>
set firewall global-options flow-offload hardware interface <name>
```
Generated nftables rules:
```
table inet vyos_offload {
flowtable VYOS_FLOWTABLE_software {
hook ingress priority filter - 1; devices = { eth0, eth1, eth2, eth3 };
counter
}
chain VYOS_OFFLOAD_software {
type filter hook forward priority filter - 1; policy accept;
ct state { established, related } meta l4proto { tcp, udp } flow add @VYOS_FLOWTABLE_software
}
}
```
Use this option to count packets and bytes for each offloaded flow:
```
set system conntrack flow-accounting
```
To verify a connection is offloaded, run
```
cat /proc/net/nf_conntrack|grep OFFLOAD
```
This PR follows firewalld's implementation: https://github.com/firewalld/firewalld/blob/e748b97787d685d0ca93f58e8d4292e87d3f0da6/src/firewall/core/nftables.py#L590
A good introduction to nftables flowtable: https://thermalcircle.de/doku.php?id=blog:linux:flowtables_1_a_netfilter_nftables_fastpath
|
|
T4072: add firewall bridge filtering.
|
|
login: T4754: show configured 2FA OTP key
|
|
Currently VyOS has `protocol igmp` option to enable IGMP querier and reports through FRR's pimd.
I would like to add support for IPv6 as well since FRR's IPv6 multicast functionality has significantly improved.
Enabling both MLD and IGMP on a VyOS router will allow us to turn on multicast snooping on layer-3 switches in dual-stack networks.
Example commands:
```
// Enable on interface eth0
set protocols pim6 interface eth0
// Explicitly join multicast group ff18::1234 on interface eth1
set protocols pim6 interface eth1 mld join ff18::1234
// Explicitly join source-specific multicast group ff38::5678 with source address 2001:db8::1 on interface eth1
set protocols pim6 interface eth1 mld join ff38::5678 source 2001:db8::1
```
|
|
forward chain and few matchers. Should be extended in the future.
|
|
Add support for defining config-mode dependencies in add-on packages.
|
|
conntrack: T4309: T4903: Refactor `system conntrack ignore`, add IPv6 support and firewall groups
|
|
interface: T5550: Interface source-validation priority over global value
|
|
T5480: Ability to disable SNMP for keepalived service VRRP
|
