| Age | Commit message (Collapse) | Author |
|---|
|
VRF: T3655: proper connection tracking for VRFs
|
|
Currently, all VRFs share the same connection tracking table, which can
lead to problems:
- traffic leaks to a wrong VRF
- improper NAT rules handling when multiple VRFs contain the same IP
networks
- stateful firewall rules issues
The commit implements connection tracking zones support. Each VRF
utilizes its own zone, so connections will never mix up.
It also adds some restrictions to VRF names and assigned table numbers,
because of nftables and conntrack requirements:
- VRF name should always start from a letter (interfaces that start from
numbers are not supported in nftables rules)
- table number must be in the 100-65535 range because conntrack supports
only 65535 zones
|
|
|
|
update to use PKI.
|
|
|
|
Also adds check for the charon socket instead of an arbitrary sleep()
|
|
- Adds client/server authentication methods.
- Adds basic verification to remote-access.
- Adds DHCP pool and options to remote-access.
- Cleanup unused PKI files.
|
|
Used by both site2site and remote-access/road-warrior VPN connections.
|
|
|
|
|
|
set vpn ipsec esp-group ESP-RW compression 'disable'
set vpn ipsec esp-group ESP-RW lifetime '3600'
set vpn ipsec esp-group ESP-RW pfs 'disable'
set vpn ipsec esp-group ESP-RW proposal 10 encryption 'aes256'
set vpn ipsec esp-group ESP-RW proposal 10 hash 'sha256'
set vpn ipsec esp-group ESP-RW proposal 20 encryption 'aes256'
set vpn ipsec esp-group ESP-RW proposal 20 hash 'sha1'
set vpn ipsec ike-group IKE-RW key-exchange 'ikev2'
set vpn ipsec ike-group IKE-RW lifetime '10800'
set vpn ipsec ike-group IKE-RW mobike 'enable'
set vpn ipsec ike-group IKE-RW proposal 10 dh-group '2'
set vpn ipsec ike-group IKE-RW proposal 10 encryption 'aes256'
set vpn ipsec ike-group IKE-RW proposal 10 hash 'sha1'
set vpn ipsec ike-group IKE-RW proposal 20 dh-group '2'
set vpn ipsec ike-group IKE-RW proposal 20 encryption 'aes128'
set vpn ipsec ike-group IKE-RW proposal 20 hash 'sha1'
set vpn ipsec ipsec-interfaces interface 'dum0'
set vpn ipsec remote-access rw authentication id 'vyos'
set vpn ipsec remote-access rw authentication local-users username vyos password vyos
set vpn ipsec remote-access rw authentication x509 ca-certificate 'peer_172-18-254-202'
set vpn ipsec remote-access rw authentication x509 certificate 'peer_172-18-254-202'
set vpn ipsec remote-access rw description 'asdf'
set vpn ipsec remote-access rw esp-group 'ESP-RW'
set vpn ipsec remote-access rw ike-group 'IKE-RW'
|
|
Commit 32fab6c7c ("ipsec: T2816: provide esp and ike-group XML building block")
by accident added an IKEv2 road-warrior configuration to swanctl template.
The config blog was never activate as the CLI nodes are still missing. Still
unclean :(.
|
|
|
|
|
|
Renamed CLI from "logging log-modes" to "log subsystem" and "logging log-level"
to "log level". THat is more human firendly.
|
|
VyOS has a known to work mechanism in supplying CLI default values into the
Python configuration scripts. This commit removes hardcoded default values from
the Jinja2 template and places them into the appropriate XML definitions.
The big advantage is that the default value itself and the corresponding help
string are located in the exact same file.
|
|
Commit 2d79a500 ("ipsec: T2816: add Jinja2 converter for ESP/IKE groups to
string") added a Jinja2 helper function which can be used to transform VyOS CLI
ESP and IKE key proposals into a strongSwan compatible string cipher.
This commit changes the IPSec implementation to make use of this new Jinja2
filter fubction/Python helper. This is required base work for better automated
tests (smoketests) but also for an IKEv2 road-warrior setup.
|
|
* use indent = 2
* prefer 'if foo.bar is defined' over 'if "bar" in foo'
|
|
|
|
|
|
* 'pki_ipsec' of https://github.com/sarthurdev/vyos-1x:
pki: ipsec: T3642: Update migration script to account for file permission issues
pki: ipsec: T3642: Migrate IPSec to use PKI configuration
pki: T3642: New PKI config and management
|
|
|
|
|
|
|
|
|
|
XFRM interfaces are similar to VTI devices in their basic functionality but
offer several advantages:
* No tunnel endpoint addresses have to be configured on the interfaces.
Compared to VTIs, which are layer 3 tunnel devices with mandatory endpoints,
this resolves issues with wildcard addresses (only one VTI with wildcard
endpoints is supported), avoids a 1:1 mapping between SAs and interfaces, and
easily allows SAs with multiple peers to share the same interface.
* Because there are no endpoint addresses, IPv4 and IPv6 SAs are supported on
the same interface (VTI devices only support one address family).
* IPsec modes other than tunnel are supported (VTI devices only support
tunnel mode).
* No awkward configuration via GRE keys and XFRM marks. Instead, a new identifier
(XFRM interface ID) links policies and SAs with XFRM interfaces.
|
|
Commit 166d44b3 ("nat: T1083: add translation options for persistent/random
mapping of address and port") added support for persistent IP address and port
mappings for NAT.
Unfortunately one if clause got lost in translation.
|
|
and port
Tested using:
set destination rule 100 inbound-interface 'eth0'
set destination rule 100 translation address '19.13.23.42'
set destination rule 100 translation options address-mapping 'random'
set destination rule 100 translation options port-mapping 'none'
set source rule 1000 outbound-interface 'eth0'
set source rule 1000 translation address '122.233.231.12'
set source rule 1000 translation options address-mapping 'persistent'
set source rule 1000 translation options port-mapping 'fully-random'
|
|
|
|
|
|
Executing iproute2 commands as unprivileged member of the openvpn group is now
handled via a sudoers file.
|
|
FRR also expects the MIBs in /usr/share/snmp/mibs
|
|
|
|
|
|
Thi adds a new configuration level "set extcommunity" which then holds rt and
soo als leaf-nodes below. This is the foundational work required to
properly implement T3624 ("BGP: add support for extended community bandwidth
definition")
|
|
selectors, and selectors with VTI.
|
|
Commit 945300c6f5 ("snmp: mibs: import from vyatta-cfg-system") imported
the MIBs from vyatta-cfg-system and provided them with a symlink to
/usr/share/vyos/mibs. The symlink was never installed as the directory already
existed. Adjust the MIBDIRS environment variable to load the MIBs from the
proper VyOS folder and use no symlink at all.
|
|
|
|
|
|
dhcp-interface
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
