summaryrefslogtreecommitdiff
path: root/data
AgeCommit message (Collapse)Author
2022-09-20ipsec: T4118: bugfix migration of IKEv2 road-warrior "id" CLI optionChristian Poessinger
The "authentication id" option for road-warriors did not get migrated to the new local-id CLI node. This has been fixed.
2022-09-18Merge pull request #1543 from Cheeze-It/currentChristian Poessinger
isis: T4693: Fix ISIS segment routing configurations, part deux
2022-09-18Update protocols_isis.pyCheeze_It
isis: T4693: Fix ISIS segment routing configurations This change is to fix more bugs in which ISIS segment routing was broken due to a refactor. This change also introduces a few additions to the ISIS handler for checking per prefix validations for segment value and mutual exclusivity for two options.
2022-09-17Merge pull request #1546 from nicolas-fort/fwall-jumpChristian Poessinger
T4699: Firewall: Add jump action in firewall ruleset
2022-09-17pppoe-server: T4703: combine vlan-id and vlan-range into single CLI nodeChristian Poessinger
The initial Accel-PPP PPPoE implementation used: set service pppoe-server interface <name> vlan-id <id> set service pppoe-server interface <name> vlan-range <start-stop> This is actually a duplicated CLI node.
2022-09-16firewall: T2199: enable "auto-merge" on setsChristian Poessinger
vyos@vyos# show firewall +name foo { + rule 1 { + action accept + packet-length 100 + packet-length 105 + packet-length 200-300 + packet-length 220-250 + } +} will report a nftables error upon load: Error: conflicting intervals specified With nftables 1.0.3 there is an "auto-merge" option which corrects this: https://lwn.net/Articles/896732/
2022-09-16Merge pull request #1463 from sever-sever/T4118Daniil Baturin
ipsec: T4118: Change vpn ipsec syntax for IKE ESP and peer
2022-09-16T4699: Firewall: Add jump action in firewall rulestNicolas Fort
2022-09-16ipsec: T4118: Change vpn ipsec syntax for IKE ESP and peerViacheslav Hletenko
Migration and Change boolean nodes "enable/disable" to disable-xxxx, enable-xxxx and just xxx for VPN IPsec configurations - IKE changes: - replace 'ipsec ike-group <tag> mobike disable' => 'ipsec ike-group <tag> disable-mobike' - replace 'ipsec ike-group <tag> ikev2-reauth yes|no' => 'ipsec ike-group <tag> ikev2-reauth' - ESP changes: - replace 'ipsec esp-group <tag> compression enable' => 'ipsec esp-group <tag> compression' - PEER changes: - replace: 'peer <tag> id xxx' => 'peer <tag> local-id xxx' - replace: 'peer <tag> force-encapsulation enable' => 'peer <tag> force-udp-encapsulation' - add option: 'peer <tag> remote-address x.x.x.x' Add 'peer <name> remote-address <name>' via migration script
2022-09-16ocserv: openconnect: T4656: add listen-address CLI optionDemon_H
This will set the listen-host ocserv configuration option.
2022-09-15Merge pull request #1477 from sempervictus/feature/ocserv_groupsViacheslav Hletenko
T3896(adjacent): Fix ocserv local user requirement, add groupconfig
2022-09-15bgp: T4696: add support for "bestpath peer-type multipath-relax"Christian Poessinger
Add new VyOS CLI command: set protocols bgp parameters bestpath peer-type multipath-relax This command specifies that BGP decision process should consider paths from all peers for multipath computation. If this option is enabled, paths learned from any of eBGP, iBGP, or confederation neighbors will be multipath if they are otherwise considered equal cost. [1] [1]: http://docs.frrouting.org/en/stable-8.3/bgp.html#clicmd-bgp-bestpath-peer-type-multipath-relax
2022-09-14Merge pull request #1537 from sarthurdev/nhrp_nftablesChristian Poessinger
nhrp: T2199: Use separate table in nftables for NHRP rules
2022-09-14nhrp: T2199: Use separate table in nftables for NHRP rulessarthurdev
2022-09-14Merge pull request #1534 from sarthurdev/firewall_interfacesChristian Poessinger
firewall: zone-policy: T2199: T4605: Refactor firewall, migrate zone-policy
2022-09-13isis: T4693: Fix ISIS segment routing configurationsCheeze_It
This change is to fix a bug in which ISIS segment routing was broken due to a refactor. This change also is going to introduce a smoketest to make sure this is caught in the future.
2022-09-13zone-policy: T2199: Migrate zone-policy to firewall nodesarthurdev
2022-09-13firewall: T4605: Rename filter tables to vyos_filtersarthurdev
2022-09-13firewall: T2199: Move initial firewall tables to datasarthurdev
2022-09-13firewall: T2199: Refactor firewall + zone-policy, move interfaces under ↵sarthurdev
firewall node * Refactor firewall and zone-policy rule creation and cleanup * Migrate interface firewall values to `firewall interfaces <name> <direction> name/ipv6-name <name>` * Remove `firewall-interface.py` conf script
2022-09-12telegraf: T4617: add Restart=always to systemd unitChristian Poessinger
2022-09-12Merge pull request #1526 from roedie/T4665-2Christian Poessinger
T4665: Keepalived: Fix interface names
2022-09-11T4665: Keepalived: Fix interface namesSander Klein
When applying the same VRID for IPv4 and IPv6 with RFC3768 compatibility enabled, the IPv6 interfaces came back with the wrong name. For example: Name Interface VRID State Priority Last Transition ------ ----------- ------ ------- ---------- ----------------- v4-10 eth1v10 10 MASTER 100 21s v6-10 vrrpv10 10 MASTER 100 21s Because of this, the IPv6 interface didn't show up in `show int`. This change suffixes the interface with the IP version so `show int` works again. Name Interface VRID State Priority Last Transition ------ ----------- ------ ------- ---------- ----------------- v4-10 eth1v10v4 10 MASTER 100 21s v6-10 eth1v10v6 10 MASTER 100 21s vyos@vyos:~$ show interfaces Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down Interface IP Address S/L Description --------- ---------- --- ----------- [....] eth1v10v4 192.168.10.60/24 u/u eth1v10v6 2001:ffff::1/64 u/u [....]
2022-09-09Merge branch 'current' into standardize-show-system-storageChristian Poessinger
2022-09-08system: T4682: standardize op-mode 'show system storage'John Estabrook
2022-09-08system: T4681: convert 'show_uptime.py' script to standardized formatJohn Estabrook
2022-09-06radius: T4672: Fix RADIUS server disable template logicBenjamin M. Hughes
2022-09-01Merge pull request #1466 from sever-sever/T538Christian Poessinger
nat: T538: Add static NAT one-to-one
2022-09-01policy-route: T4655: Remove default_action from templateViacheslav Hletenko
Remove `default_action` from template "nftables-policy" as XML policy route does not use it Set default action 'accept' for policy route, as default action 'drop' must be used only for firewall and not related to the policy route
2022-08-31nat: T538: Move nat configs to /run directoryViacheslav Hletenko
2022-08-26Merge pull request #1482 from sever-sever/T4631Christian Poessinger
nat66: T4631: Add port and protocol to nat66 conf
2022-08-25Merge pull request #1458 from sever-sever/T4594Christian Poessinger
ipsec: T4594: Rewrite op-mode 'show vpn ipsec sa' to the new format
2022-08-25telegraf: T4617: add VRF supportChristian Poessinger
2022-08-24T3896: update group syntax per PR1463RageLtMan
2022-08-22BGP: T4634: Allow configuration of disable-connected-checkSander Klein
2022-08-20nat66: T4631: Add port and protocol to nat66Viacheslav Hletenko
Ability to configure src/dst/translation port and protocol for SNAT and DNAT IPv6
2022-08-19UPnP: T4611: Rule must be as prefix instead of an addressViacheslav Hletenko
From the doc miniupnpd IP/mask format must be nnn.nnn.nnn.nnn/nn Comment out invalid option "anchor"
2022-08-18T3896: update groupconfig syntax per PR1463RageLtMan
Address @sever-sever's suggestion to refactor how groupconfig is defined, parsed, and set (with his proposed conditional string appending Py-sugar). Use the disable-mobike refactor as template for XML simplification. Testing: None yet
2022-08-18T3896: Use group selector and forced dns tunnelingRageLtMan
Enterprise RADIUS configurations often utilize group selectors for authentication and attribute distribution for connecting clients. Ocserv implements this functionality via the `select-group` config file attribute, repeating for multiple groups. When a user selects their membership group and the request is passed to the RADIUS server, ocserv will match the returned Class attribute against the value selected by the user. This functionality also works for local group membership resolution, although VyOS currently doesn't have group membership configuration for this. Expose the tunnel-all-dns option in the ocserv config file allowing users who deploy default routes to select split-dns and those who do not to enable full DNS tunneling. Testing: Smoketests & build Configured groups in openconnect profile and verified existence in /run/ocserv/ocserv.conf Configured forced dns tunneling and verified presence of setting in /run/ocserv/ocserv.conf
2022-08-18T3896: Drop cserv local user req, add groupconfigRageLtMan
From ocserv documentation: ``` If the groupconfig option is set, then config-per-user will be overriden, and all configuration will be read from radius. That also includes the Acct-Interim-Interval, and Session-Timeout values. ``` Implement yes/no configuration and parameter handling during jinja rendering. Fix bug wherein openconnect-server configuration requires creation of local user accounts even when RADIUS authentication is used. Testing: Set the groupconfig=yes param and observed change in generated /run/ocserv/ocserv.conf. Removed the local users via `delete vpn openconnect authentication local-users` and observed commit & service operation
2022-08-17nat: T538: Add static NAT one-to-oneViacheslav Hletenko
Ability to set static NAT (one-to-one) in one rule set nat static rule 10 destination address '203.0.113.0/24' set nat static rule 10 inbound-interface 'eth0' set nat static rule 10 translation address '192.0.2.0/24' It will be enough for PREROUTING and POSTROUTING rules Use a separate table 'vyos_static_nat' as SRC/DST rules and STATIC rules can have the same rule number
2022-08-16UPnP: T4620: Fix Jinja2 template rulesViacheslav Hletenko
2022-08-16Merge pull request #1462 from sever-sever/T4596Christian Poessinger
ocserv: T4596: Rewrite show openconnect sessions op-mode
2022-08-15ocserv: openconnect: T4614: add support for split-dnsChristian Poessinger
set vpn openconnect network-settings split-dns <domain>
2022-08-15ocserv: T4333: migrate to new vyos_defined Jinja2 testChristian Poessinger
2022-08-10dmvpn: T4595: Fix dpd profile optionsViacheslav Hletenko
Fix template for configuration DMVPN IKE profile dead-peer-detection delay and dead-peer-detecion timeout options
2022-08-06ocserv: T4596: Rewrite show openconnect sessions op-modeViacheslav Hletenko
Rewrite "show openconnect-server sessions" to vyos.opmode format Ability to get raw and formatted output Ability to get data via API
2022-08-05nat66: T4598: Add exclude options in nat66Nicolas Fort
2022-08-04Merge https://github.com/Cheeze-It/vyos-1x into currentChristian Poessinger
* https://github.com/Cheeze-It/vyos-1x: bgp: T4257: Changing BGP "local-as" to "system-as"
2022-08-04macsec: T4537: macsec_csindex can be set even without encryptionChristian Poessinger