summaryrefslogtreecommitdiff
path: root/data
AgeCommit message (Collapse)Author
2021-08-16openvpn: T690: Add metric for pushed routesViacheslav
2021-08-15ospf: T3236: improve Jinja2 template - always use if before a loopChristian Poessinger
2021-08-15ospf: T3757: support to configure area at an interface levelChristian Poessinger
FRR supports configuring either network prefixes per area, or assign an interface to an area to participate in the routing process. This is already well known from other venders and supported by FRR. A valid VyOS OSPF configuration would then look like: vyos@vyos# show protocols ospf { interface dum0 { area 0 } interface eth0.201 { area 0 authentication { md5 { key-id 10 { md5-key vyos } } } dead-interval 40 hello-interval 10 priority 1 retransmit-interval 5 transmit-delay 1 } log-adjacency-changes { detail } parameters { abr-type cisco router-id 172.18.254.201 } passive-interface default passive-interface-exclude eth0.201 }
2021-08-14ospf: T3236: use proper daemon named template fileChristian Poessinger
2021-08-13vrf: T3734: T3728: vni must be configured with a higher priority then bgpdChristian Poessinger
When removing bgp (vrf) instances the assigned VRF vni must be deleted from FRR prior the removal of the bgp settings (T3734). This is now done by moving the CLI command "set vrf name red vni 1000" to a dedicated Python script with a priority higher then bgp.
2021-08-13Merge pull request #914 from sever-sever/T3673Christian Poessinger
policy: T3673: Add set large-comm-list for route-map
2021-08-13policy: T3673: Add set large-comm-list-delete for route-mapViacheslav
2021-08-13nginx: T3740: use bracketize_ipv6 Jinja2 filter on server addressChristian Poessinger
2021-08-10Merge pull request #961 from sarthurdev/T3727Christian Poessinger
ipsec: T3727: Fix ESP proposals not being set from tunnel esp-group
2021-08-10ipsec: T3727: Fix ESP proposals not being set from tunnel esp-groupsarthurdev
2021-08-10snmp: T3709: Allow enable oid ipCidrRouteTableViacheslav
2021-08-06http-api: T2768: example using GraphQL for high-level config operationsJohn Estabrook
2021-08-06Revert "http-api: T2768: example using GraphQL for high-level config operations"John Estabrook
This reverts commit a2b959c50c96698da173b9c4720369a51442cc5c.
2021-08-06http-api: T2768: example using GraphQL for high-level config operationsJohn Estabrook
2021-08-03isis: T1316: rename Jinja2 template to match other FRR daemonsChristian Poessinger
2021-08-03isis: T3693: bugfix Jinja2 templateChristian Poessinger
Commit 472c9568 ("isis: T3693: Adding IPv6 redistribution to ISIS") did not pass rendering, am exception got thrown: jinja2.exceptions.UndefinedError: 'dict object' has no attribute 'protocol' This commit fixes the templateing code.
2021-08-01Merge pull request #943 from Cheeze-It/currentChristian Poessinger
isis: T3693: Adding IPv6 redistribution to ISIS
2021-07-31isis: T3693: Adding IPv6 redistribution to ISISCheeze_It
In this commit we add the ability to redistribute into ISIS for IPv6 address family.
2021-07-30Merge pull request #949 from sever-sever/T1176-currChristian Poessinger
bgp: T1176: Add solo option for neighbor
2021-07-30router-advert: T2745: use template common coding style in for loopsChristian Poessinger
2021-07-30bgp: T1176: Add solo option for neighborViacheslav
2021-07-29ipsec: T1210: add op-mode command to print Windows connection profileChristian Poessinger
2021-07-27ipsec: T3705: bugfix for VTI interfaces no honoring default-esp-groupChristian Poessinger
2021-07-26ipsec: T1210: extend support for iOS profile generationChristian Poessinger
$ generate ipsec mac-ios-profile <connection> remote <ip>
2021-07-25ipsec: T1210: add RADIUS authentication for remote-access IKEv2 VPNChristian Poessinger
set vpn ipsec remote-access connection rw authentication client-mode 'eap-radius' set vpn ipsec remote-access connection rw authentication id '192.0.2.1' set vpn ipsec remote-access connection rw authentication server-mode 'x509' set vpn ipsec remote-access connection rw authentication x509 ca-certificate 'CAcert_Class_3_Root' set vpn ipsec remote-access connection rw authentication x509 certificate 'vyos' set vpn ipsec remote-access connection rw esp-group 'ESP-RW' set vpn ipsec remote-access connection rw ike-group 'IKE-RW' set vpn ipsec remote-access connection rw local-address '192.0.2.1' set vpn ipsec remote-access connection rw pool 'ra-rw-ipv4' set vpn ipsec remote-access connection rw unique 'never' set vpn ipsec remote-access pool ra-rw-ipv4 name-server '192.0.2.2' set vpn ipsec remote-access pool ra-rw-ipv4 prefix '192.168.22.0/24' set vpn ipsec remote-access radius nas-identifier 'fooo' set vpn ipsec remote-access radius server 172.16.100.10 key 'secret'
2021-07-25ipsec: T1210: move DHCP server configuration unter remote-access nodeChristian Poessinger
As this is only related to remote-access, keeping it under "options" simply feels wrong.
2021-07-22pki: https: T3642: Migrate HTTPS to use PKI configurationsarthurdev
2021-07-21pki: openvpn: T3642: Migrate OpenVPN to PKI and refactorsarthurdev
2021-07-20ipsec: T1210: create uuid from empty string in ios profileChristian Poessinger
2021-07-20ipsec: T1210: add op-mode command for macOS and iOS profile generationChristian Poessinger
generate ipsec mac-ios-profile <connection> remote <ip|fqdn> will generate a matching IPSec profile which can be loaded on an iOS device.
2021-07-20pki: eapol: T3642: Migrate EAPoL to use PKI configurationsarthurdev
2021-07-20pki: sstp: T3642: Migrate SSTP to PKI configurationsarthurdev
2021-07-20pki: openconnect: T3642: Migrate OpenConnect SSL to PKI configurationsarthurdev
2021-07-19ipsec: T1210: add "unique" option to specify how to handle multiple connectionsChristian Poessinger
Connection uniqueness policy to enforce. To avoid multiple connections from the same user, a uniqueness policy can be enforced. * never: never enforce such a policy, even if a peer included INITIAL_CONTACT notification * keep: reject new connection attempts if the same user already has an active connection * replace: delete any existing connection if a new one for the same user gets established To compare connections for uniqueness, the remote IKE identity is used. If EAP or XAuth authentication is involved, the EAP-Identity or XAuth username is used to enforce the uniqueness policy instead.
2021-07-19ipsec: T1210: split out pool from remote-access configurationChristian Poessinger
Remote access IP pools can now be defined at a global level and referenced in IPSec remote-access connections. To defined a pool use: set vpn ipsec remote-access pool global-ipv4 name-server '172.16.1.1' set vpn ipsec remote-access pool global-ipv4 prefix '192.168.0.0/24' set vpn ipsec remote-access pool global-ipv6 name-server '2001:db8::1' set vpn ipsec remote-access pool global-ipv6 prefix '2001:db8:1000::/64' A connection can then reference the pool: set vpn ipsec remote-access connection foo pool 'global-ipv4' set vpn ipsec remote-access connection foo pool 'global-ipv6'
2021-07-18ipsec: T1210: remote-access pools can not hold both IPv4 and IPv6 prefixesChristian Poessinger
... this enables a dual-stack IKEv2 VPN deployment.
2021-07-17Merge pull request #927 from zdc/T3655-sagittaChristian Poessinger
VRF: T3655: proper connection tracking for VRFs
2021-07-17VRF: T3655: proper connection tracking for VRFszsdc
Currently, all VRFs share the same connection tracking table, which can lead to problems: - traffic leaks to a wrong VRF - improper NAT rules handling when multiple VRFs contain the same IP networks - stateful firewall rules issues The commit implements connection tracking zones support. Each VRF utilizes its own zone, so connections will never mix up. It also adds some restrictions to VRF names and assigned table numbers, because of nftables and conntrack requirements: - VRF name should always start from a letter (interfaces that start from numbers are not supported in nftables rules) - table number must be in the 100-65535 range because conntrack supports only 65535 zones
2021-07-17ipsec: T2816: migrate "ipsec interfaces" to "interface"Christian Poessinger
2021-07-15pki: ipsec: l2tp: T2816: T3642: Move IPSec/L2TP code into vpn_ipsec.py and ↵sarthurdev
update to use PKI.
2021-07-07pki: T3642: Migrate rsa-keys to PKI configurationsarthurdev
2021-07-06ipsec: T2816: Migrate ipsec-settings.xml.in and charon.conf to vpn_ipsec.pysarthurdev
Also adds check for the charon socket instead of an arbitrary sleep()
2021-07-05ipsec: T1210: T1251: Add more features to remote-access connectionssarthurdev
- Adds client/server authentication methods. - Adds basic verification to remote-access. - Adds DHCP pool and options to remote-access. - Cleanup unused PKI files.
2021-07-04ipsec: T1210: T1251: add "local" traffic-selector include definitionChristian Poessinger
Used by both site2site and remote-access/road-warrior VPN connections.
2021-07-04ipsec: T1210: T1251: add remote-access "name-server" definition to pool configChristian Poessinger
2021-07-04ipsec: T1210: T1251: extend ra config with address pools/traffic selectorssarthurdev
2021-07-04ipsec: T1210: T1251: IKEv2 road-warrior supportChristian Poessinger
set vpn ipsec esp-group ESP-RW compression 'disable' set vpn ipsec esp-group ESP-RW lifetime '3600' set vpn ipsec esp-group ESP-RW pfs 'disable' set vpn ipsec esp-group ESP-RW proposal 10 encryption 'aes256' set vpn ipsec esp-group ESP-RW proposal 10 hash 'sha256' set vpn ipsec esp-group ESP-RW proposal 20 encryption 'aes256' set vpn ipsec esp-group ESP-RW proposal 20 hash 'sha1' set vpn ipsec ike-group IKE-RW key-exchange 'ikev2' set vpn ipsec ike-group IKE-RW lifetime '10800' set vpn ipsec ike-group IKE-RW mobike 'enable' set vpn ipsec ike-group IKE-RW proposal 10 dh-group '2' set vpn ipsec ike-group IKE-RW proposal 10 encryption 'aes256' set vpn ipsec ike-group IKE-RW proposal 10 hash 'sha1' set vpn ipsec ike-group IKE-RW proposal 20 dh-group '2' set vpn ipsec ike-group IKE-RW proposal 20 encryption 'aes128' set vpn ipsec ike-group IKE-RW proposal 20 hash 'sha1' set vpn ipsec ipsec-interfaces interface 'dum0' set vpn ipsec remote-access rw authentication id 'vyos' set vpn ipsec remote-access rw authentication local-users username vyos password vyos set vpn ipsec remote-access rw authentication x509 ca-certificate 'peer_172-18-254-202' set vpn ipsec remote-access rw authentication x509 certificate 'peer_172-18-254-202' set vpn ipsec remote-access rw description 'asdf' set vpn ipsec remote-access rw esp-group 'ESP-RW' set vpn ipsec remote-access rw ike-group 'IKE-RW'
2021-07-03ipsec: T2816: remove erroneously added config snipped for road-warriorsChristian Poessinger
Commit 32fab6c7c ("ipsec: T2816: provide esp and ike-group XML building block") by accident added an IKEv2 road-warrior configuration to swanctl template. The config blog was never activate as the CLI nodes are still missing. Still unclean :(.
2021-07-03ipsec: T2816: provide x509 certificate base auth building blocksChristian Poessinger
2021-07-03ipsec: T2816: provide esp and ike-group XML building blockChristian Poessinger