summaryrefslogtreecommitdiff
path: root/interface-definitions/dns-dynamic.xml.in
AgeCommit message (Collapse)Author
2023-12-05ddclient: T5791: Update dynamic dns configuration pathIndrajit Raychaudhuri
Modify the configuration path to be consistent with the usual dialects of VyoS configuration (wireguard, dns, firewall, etc.) This would also shorten the configuration path and have a unified treatment for RFC2136-based updates and other 'web-service' based updates. While at it, add support for per-service web-options. This would allow for probing different external URLs on a per-service basis.
2023-12-01Merge pull request #2557 from vyos/mergify/bp/sagitta/pr-2467Christian Breunig
T5727: Use native URL validator instead of regex-based validator (backport #2467)
2023-12-01T5727: Use native URL validator instead of regex-based validatorIndrajit Raychaudhuri
Replace regex-based URL validator with native validator from vyos-utils. Also, move `include/url.xml.i` to `include/url-http-https.xml.i` to reflect the fact that it is used only for HTTP(S) URLs. (cherry picked from commit 64322b19d6968195a6dc7c82e7e22126072377f5)
2023-11-30ddclient: T5708: Migrate `timeout` to `interval`Indrajit Raychaudhuri
Time interval in seconds to wait between DNS updates would be a bit more intuitive as `interval` than `timeout`.
2023-11-30ddclient: T5574: Support per-service cache management for servicesIndrajit Raychaudhuri
Add support for per-service cache management for ddclient providers via `wait-time` and `expiry-time` options. This allows for finer-grained control over how often a service is updated and how long the hostname will be cached before being marked expired in ddclient's cache. More specifically, `wait-time` controls how often ddclient will attempt to check for a change in the hostname's IP address, and `expiry-time` controls how often ddclient to a forced update of the hostname's IP address. These options intentionally don't have any default values because they are provider-specific. They get treated similar to the other provider- specific options in that they are only used if defined.
2023-11-30ddclient: T5612: Refactor zone configurationIndrajit Raychaudhuri
Refactor zone configuration to use shared XML snippet for all cases.
2023-11-30ddclient: T5612: Enable TTL support for web-service based protocolsIndrajit Raychaudhuri
Enable TTL support for web-service based protocols in addition to RFC2136 based (nsupdate) protocol. Since TTL is not supported by all protocols, and thus cannot have a configuration default, the existing XML snippet `include/dns/time-to-live.xml.i` does not have common `<defaultValue>300</defaultValue>` anymore and is instead added explicitly whenever necessary.
2023-11-30ddclient: T5612: Fix VRF support for ddclient serviceIndrajit Raychaudhuri
Fix VRF support interface definition and configuration mode for ddclient to actually capture the VRF name and pass it to the template.
2023-08-06dyndns: T5445: add possibility to specify update interval (timeout)Christian Breunig
set service dns dynamic timeout <60-3600>
2023-06-09dns: T5144: Adjust DNS related CLI help messages for consistencyIndrajit Raychaudhuri
This should make the help messages more consistent for DNS related CLI subtree.
2023-06-04dns: T5144: Relocate ddclient template path for consistency with config pathIndrajit Raychaudhuri
2023-06-03dns: T5144: Modernize dynamic dns operationIndrajit Raychaudhuri
Apply next round of configuration tree updates to 'service dns dynamic' with the following changes: - Migrate `service dns dynamic interface <interface> [use-web]` to `service dns dynamic address <interface>` or `service dns dynamic address web [web-options]` This communicates the intent that dynamic dns IP address is detected in only one way - using the `<interface>` or using an external web request, not both. - When using external web request, (`service dns dynamic address web`), external url is optional (`web-options url`). Ddclient defaults are used when unspecified, - Rename all config `login` to `username` for consistency and also to align better with alternative ddclient backends in consideration. - Apply global 'ipv6-enable' to per service 'ip-version: ipv6'. Selecting usage of IPv4 or IPv6 (or both simultaneously) is now at per service (protocol) level instead of global level. This allows more control on the ability to select IPv4 in some cases and IPv6 in some other cases wherever supported by the underlying ddclient protocol. - While the IP address (and by extension, the detection mechanism) is global, the way it is applied to a particular ddclient protocol depends on whether it supports IPv4 or IPv6 or both. - Related to the above, this also prevents generating incorrect config file (`ddclient.conf`) with multiple global sections leading to an unpredictable behavior of ddclient. - Implement provider (protocol) specific custom tweaks whenever possible (e.g., `zone`, `username`, `server` are not necessary in all cases). - Move service name from a combination of 'protocol' (with protocol config autodetected) and custom (with protocol config specified) to a single 'service' key. This allows for consisent setup of multiple config for the same ddclient protocol (with different options and credentials). This also avoid ambiguity with usual networking term 'protocol' and ddclient specific term 'protocol' (and can change with a move to a different backend). - Apply upfront XML constraints and validations consistently wherever applicable. - RFC2136 specific change: Rename rfc2136 config `record` to `host-name` for consistency. - Cloudflare specific change: While ddclient still supports authenticating with email and global auth key, skipping `username` in config will indicate the intent to use API token authentication (with special 'token' literal as `username`).
2023-05-08dns: T4144: additional improvements to dynamic DNS XML definitionsChristian Breunig
* Re-use XML building blocks when poossible * Use XML constraints when possible (password) * Capitalize protocols (HTTP) in <help> strings
2023-04-21dns: T5144: Improve dynamic DNS validations and completionsIndrajit Raychaudhuri
Apply validations and completions to dynamic DNS protocols supported. This also opens up additional protocols supported by ddclient 3.10. Additional details: - Validation and constraint have been added for interface names as well. - While at it, the help texts got some copyedit and rewording.
2023-03-09xml: T4952: improve interface completion helper CLI experienceChristian Breunig
2022-12-11xml: ddns: T4792: split "server" CLI node into building blockChristian Poessinger
2022-06-10xml: drop not always applicable REQUIRED suffix from completion help stringChristian Poessinger
If a parameter is required is determined from the Python string on commit. This "indicator" is not used consistently and sometimes missing, or added where it is not required anymore due to Python script improvement/rewrite.
2022-04-29xml: T4047: use full string match in the regex validatorChristian Poessinger
2021-10-18ddclient: T3897: Add option for IPv6 Dynamic DNSViacheslav
2021-08-29xml: add missing "u32:" value declarator on integer rangesChristian Poessinger
2021-01-02ddclient: T2858: no need to add a discrete priorityChristian Poessinger
2021-01-02ddclient: T3175: update supported protocol listChristian Poessinger
2020-12-29xml: use new valueHelp format identifier "filename"Christian Poessinger
2020-09-13ddclient: T2858: migrate to get_config_dict()Christian Poessinger
2020-02-13ddclient: T1908: CloudFlares zone option can now also be specified manuallyChristian Poessinger
If there is no zone option given it will be "guessed" as in the past. This means (hostname -> resulting zone entry) domain.com -> com foo.domain.com -> domain.com bar.foo.domain.com -> foo.domain.com I have zero experience in the CloudFlare zone option what it is and what it does. SO maybe we still have a chance to auto render this setting.
2020-01-09dynamic DNS: T1953: Relaxed service name checkzsdc
Internally, we can accept more than one server of each type for sending dynamic DNS updates, but due to a strong check in CLI, it is not possible to add more than one server with the same protocol (except "custom", but it allows to add only one more server). The patch relaxing this limitation by allowing adding as many servers with the same protocol, as needed.
2019-12-15dynamic-dns: T1879: extend XML validatorsChristian Poessinger
2019-12-15dynamic-dns: T1879: extend valueHelp stringsChristian Poessinger
2019-12-06T1843: run interface-definitions though GCC preprocessorChristian Poessinger
A lot of XML code is duplicated (VLAN, interface address) for instance. Such XML definitions should be moved to feature.xml.i files and then just pulled in via GCC preprocessor #include definition in e.g. bond or ethernet definitions. This will give us the ability to single-source repeating node definitions as: * Interface Address * Interface Description * Interface Disable * VLAN (both vif-s and vif-c) The .in suffix of the interface-definitions is a marker that those files are input files to the GCC preprocessor. They will be rendered into proper XML files in the build directory. Some node definitions have been reworder to remove escaped double quote occurances which would have been warned about by the GCC preprocessor.